| /* |
| * Copyright (C) 2016 Texas Instruments |
| * Author: Jyri Sarha <jsarha@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/fwnode.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/of_graph.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| |
| #define HOTPLUG_DEBOUNCE_MS 1100 |
| |
| struct tfp410 { |
| struct drm_bridge bridge; |
| struct drm_connector connector; |
| |
| struct i2c_adapter *ddc; |
| struct gpio_desc *hpd; |
| struct delayed_work hpd_work; |
| |
| struct device *dev; |
| }; |
| |
| static inline struct tfp410 * |
| drm_bridge_to_tfp410(struct drm_bridge *bridge) |
| { |
| return container_of(bridge, struct tfp410, bridge); |
| } |
| |
| static inline struct tfp410 * |
| drm_connector_to_tfp410(struct drm_connector *connector) |
| { |
| return container_of(connector, struct tfp410, connector); |
| } |
| |
| static int tfp410_get_modes(struct drm_connector *connector) |
| { |
| struct tfp410 *dvi = drm_connector_to_tfp410(connector); |
| struct edid *edid; |
| int ret; |
| |
| if (!dvi->ddc) |
| goto fallback; |
| |
| edid = drm_get_edid(connector, dvi->ddc); |
| if (!edid) { |
| DRM_INFO("EDID read failed. Fallback to standard modes\n"); |
| goto fallback; |
| } |
| |
| drm_mode_connector_update_edid_property(connector, edid); |
| |
| ret = drm_add_edid_modes(connector, edid); |
| |
| kfree(edid); |
| |
| return ret; |
| |
| fallback: |
| /* No EDID, fallback on the XGA standard modes */ |
| ret = drm_add_modes_noedid(connector, 1920, 1200); |
| |
| /* And prefer a mode pretty much anything can handle */ |
| drm_set_preferred_mode(connector, 1024, 768); |
| |
| return ret; |
| } |
| |
| static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = { |
| .get_modes = tfp410_get_modes, |
| }; |
| |
| static enum drm_connector_status |
| tfp410_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct tfp410 *dvi = drm_connector_to_tfp410(connector); |
| |
| if (dvi->hpd) { |
| if (gpiod_get_value_cansleep(dvi->hpd)) |
| return connector_status_connected; |
| else |
| return connector_status_disconnected; |
| } |
| |
| if (dvi->ddc) { |
| if (drm_probe_ddc(dvi->ddc)) |
| return connector_status_connected; |
| else |
| return connector_status_disconnected; |
| } |
| |
| return connector_status_unknown; |
| } |
| |
| static const struct drm_connector_funcs tfp410_con_funcs = { |
| .detect = tfp410_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static int tfp410_attach(struct drm_bridge *bridge) |
| { |
| struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| int ret; |
| |
| if (!bridge->encoder) { |
| dev_err(dvi->dev, "Missing encoder\n"); |
| return -ENODEV; |
| } |
| |
| if (dvi->hpd) |
| dvi->connector.polled = DRM_CONNECTOR_POLL_HPD; |
| |
| drm_connector_helper_add(&dvi->connector, |
| &tfp410_con_helper_funcs); |
| ret = drm_connector_init(bridge->dev, &dvi->connector, |
| &tfp410_con_funcs, DRM_MODE_CONNECTOR_HDMIA); |
| if (ret) { |
| dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret); |
| return ret; |
| } |
| |
| drm_mode_connector_attach_encoder(&dvi->connector, |
| bridge->encoder); |
| |
| return 0; |
| } |
| |
| static const struct drm_bridge_funcs tfp410_bridge_funcs = { |
| .attach = tfp410_attach, |
| }; |
| |
| static void tfp410_hpd_work_func(struct work_struct *work) |
| { |
| struct tfp410 *dvi; |
| |
| dvi = container_of(work, struct tfp410, hpd_work.work); |
| |
| if (dvi->bridge.dev) |
| drm_helper_hpd_irq_event(dvi->bridge.dev); |
| } |
| |
| static irqreturn_t tfp410_hpd_irq_thread(int irq, void *arg) |
| { |
| struct tfp410 *dvi = arg; |
| |
| mod_delayed_work(system_wq, &dvi->hpd_work, |
| msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int tfp410_get_connector_properties(struct tfp410 *dvi) |
| { |
| struct device_node *connector_node, *ddc_phandle; |
| int ret = 0; |
| |
| /* port@1 is the connector node */ |
| connector_node = of_graph_get_remote_node(dvi->dev->of_node, 1, -1); |
| if (!connector_node) |
| return -ENODEV; |
| |
| dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode, |
| "hpd-gpios", 0, GPIOD_IN, "hpd"); |
| if (IS_ERR(dvi->hpd)) { |
| ret = PTR_ERR(dvi->hpd); |
| dvi->hpd = NULL; |
| if (ret == -ENOENT) |
| ret = 0; |
| else |
| goto fail; |
| } |
| |
| ddc_phandle = of_parse_phandle(connector_node, "ddc-i2c-bus", 0); |
| if (!ddc_phandle) |
| goto fail; |
| |
| dvi->ddc = of_get_i2c_adapter_by_node(ddc_phandle); |
| if (dvi->ddc) |
| dev_info(dvi->dev, "Connector's ddc i2c bus found\n"); |
| else |
| ret = -EPROBE_DEFER; |
| |
| of_node_put(ddc_phandle); |
| |
| fail: |
| of_node_put(connector_node); |
| return ret; |
| } |
| |
| static int tfp410_init(struct device *dev) |
| { |
| struct tfp410 *dvi; |
| int ret; |
| |
| if (!dev->of_node) { |
| dev_err(dev, "device-tree data is missing\n"); |
| return -ENXIO; |
| } |
| |
| dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL); |
| if (!dvi) |
| return -ENOMEM; |
| dev_set_drvdata(dev, dvi); |
| |
| dvi->bridge.funcs = &tfp410_bridge_funcs; |
| dvi->bridge.of_node = dev->of_node; |
| dvi->dev = dev; |
| |
| ret = tfp410_get_connector_properties(dvi); |
| if (ret) |
| goto fail; |
| |
| if (dvi->hpd) { |
| INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func); |
| |
| ret = devm_request_threaded_irq(dev, gpiod_to_irq(dvi->hpd), |
| NULL, tfp410_hpd_irq_thread, IRQF_TRIGGER_RISING | |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| "hdmi-hpd", dvi); |
| if (ret) { |
| DRM_ERROR("failed to register hpd interrupt\n"); |
| goto fail; |
| } |
| } |
| |
| drm_bridge_add(&dvi->bridge); |
| |
| return 0; |
| fail: |
| i2c_put_adapter(dvi->ddc); |
| if (dvi->hpd) |
| gpiod_put(dvi->hpd); |
| return ret; |
| } |
| |
| static int tfp410_fini(struct device *dev) |
| { |
| struct tfp410 *dvi = dev_get_drvdata(dev); |
| |
| cancel_delayed_work_sync(&dvi->hpd_work); |
| |
| drm_bridge_remove(&dvi->bridge); |
| |
| if (dvi->ddc) |
| i2c_put_adapter(dvi->ddc); |
| if (dvi->hpd) |
| gpiod_put(dvi->hpd); |
| |
| return 0; |
| } |
| |
| static int tfp410_probe(struct platform_device *pdev) |
| { |
| return tfp410_init(&pdev->dev); |
| } |
| |
| static int tfp410_remove(struct platform_device *pdev) |
| { |
| return tfp410_fini(&pdev->dev); |
| } |
| |
| static const struct of_device_id tfp410_match[] = { |
| { .compatible = "ti,tfp410" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, tfp410_match); |
| |
| static struct platform_driver tfp410_platform_driver = { |
| .probe = tfp410_probe, |
| .remove = tfp410_remove, |
| .driver = { |
| .name = "tfp410-bridge", |
| .of_match_table = tfp410_match, |
| }, |
| }; |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| /* There is currently no i2c functionality. */ |
| static int tfp410_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int reg; |
| |
| if (!client->dev.of_node || |
| of_property_read_u32(client->dev.of_node, "reg", ®)) { |
| dev_err(&client->dev, |
| "Can't get i2c reg property from device-tree\n"); |
| return -ENXIO; |
| } |
| |
| return tfp410_init(&client->dev); |
| } |
| |
| static int tfp410_i2c_remove(struct i2c_client *client) |
| { |
| return tfp410_fini(&client->dev); |
| } |
| |
| static const struct i2c_device_id tfp410_i2c_ids[] = { |
| { "tfp410", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tfp410_i2c_ids); |
| |
| static struct i2c_driver tfp410_i2c_driver = { |
| .driver = { |
| .name = "tfp410", |
| .of_match_table = of_match_ptr(tfp410_match), |
| }, |
| .id_table = tfp410_i2c_ids, |
| .probe = tfp410_i2c_probe, |
| .remove = tfp410_i2c_remove, |
| }; |
| #endif /* IS_ENABLED(CONFIG_I2C) */ |
| |
| static struct { |
| uint i2c:1; |
| uint platform:1; |
| } tfp410_registered_driver; |
| |
| static int __init tfp410_module_init(void) |
| { |
| int ret; |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| ret = i2c_add_driver(&tfp410_i2c_driver); |
| if (ret) |
| pr_err("%s: registering i2c driver failed: %d", |
| __func__, ret); |
| else |
| tfp410_registered_driver.i2c = 1; |
| #endif |
| |
| ret = platform_driver_register(&tfp410_platform_driver); |
| if (ret) |
| pr_err("%s: registering platform driver failed: %d", |
| __func__, ret); |
| else |
| tfp410_registered_driver.platform = 1; |
| |
| if (tfp410_registered_driver.i2c || |
| tfp410_registered_driver.platform) |
| return 0; |
| |
| return ret; |
| } |
| module_init(tfp410_module_init); |
| |
| static void __exit tfp410_module_exit(void) |
| { |
| #if IS_ENABLED(CONFIG_I2C) |
| if (tfp410_registered_driver.i2c) |
| i2c_del_driver(&tfp410_i2c_driver); |
| #endif |
| if (tfp410_registered_driver.platform) |
| platform_driver_unregister(&tfp410_platform_driver); |
| } |
| module_exit(tfp410_module_exit); |
| |
| MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>"); |
| MODULE_DESCRIPTION("TI TFP410 DVI bridge driver"); |
| MODULE_LICENSE("GPL"); |