| /* |
| * SMP support for PowerNV machines. |
| * |
| * Copyright 2011 IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/cpu.h> |
| |
| #include <asm/irq.h> |
| #include <asm/smp.h> |
| #include <asm/paca.h> |
| #include <asm/machdep.h> |
| #include <asm/cputable.h> |
| #include <asm/firmware.h> |
| #include <asm/system.h> |
| #include <asm/rtas.h> |
| #include <asm/vdso_datapage.h> |
| #include <asm/cputhreads.h> |
| #include <asm/xics.h> |
| #include <asm/opal.h> |
| |
| #include "powernv.h" |
| |
| #ifdef DEBUG |
| #include <asm/udbg.h> |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| static void __cpuinit pnv_smp_setup_cpu(int cpu) |
| { |
| if (cpu != boot_cpuid) |
| xics_setup_cpu(); |
| } |
| |
| static int pnv_smp_cpu_bootable(unsigned int nr) |
| { |
| /* Special case - we inhibit secondary thread startup |
| * during boot if the user requests it. |
| */ |
| if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) { |
| if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0) |
| return 0; |
| if (smt_enabled_at_boot |
| && cpu_thread_in_core(nr) >= smt_enabled_at_boot) |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| int __devinit pnv_smp_kick_cpu(int nr) |
| { |
| unsigned int pcpu = get_hard_smp_processor_id(nr); |
| unsigned long start_here = __pa(*((unsigned long *) |
| generic_secondary_smp_init)); |
| long rc; |
| |
| BUG_ON(nr < 0 || nr >= NR_CPUS); |
| |
| /* On OPAL v2 the CPU are still spinning inside OPAL itself, |
| * get them back now |
| */ |
| if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) { |
| pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu); |
| rc = opal_start_cpu(pcpu, start_here); |
| if (rc != OPAL_SUCCESS) |
| pr_warn("OPAL Error %ld starting CPU %d\n", |
| rc, nr); |
| } |
| return smp_generic_kick_cpu(nr); |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| |
| static int pnv_smp_cpu_disable(void) |
| { |
| int cpu = smp_processor_id(); |
| |
| /* This is identical to pSeries... might consolidate by |
| * moving migrate_irqs_away to a ppc_md with default to |
| * the generic fixup_irqs. --BenH. |
| */ |
| set_cpu_online(cpu, false); |
| vdso_data->processorCount--; |
| if (cpu == boot_cpuid) |
| boot_cpuid = cpumask_any(cpu_online_mask); |
| xics_migrate_irqs_away(); |
| return 0; |
| } |
| |
| static void pnv_smp_cpu_kill_self(void) |
| { |
| unsigned int cpu; |
| |
| /* If powersave_nap is enabled, use NAP mode, else just |
| * spin aimlessly |
| */ |
| if (!powersave_nap) { |
| generic_mach_cpu_die(); |
| return; |
| } |
| |
| /* Standard hot unplug procedure */ |
| local_irq_disable(); |
| idle_task_exit(); |
| current->active_mm = NULL; /* for sanity */ |
| cpu = smp_processor_id(); |
| DBG("CPU%d offline\n", cpu); |
| generic_set_cpu_dead(cpu); |
| smp_wmb(); |
| |
| /* We don't want to take decrementer interrupts while we are offline, |
| * so clear LPCR:PECE1. We keep PECE2 enabled. |
| */ |
| mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); |
| while (!generic_check_cpu_restart(cpu)) { |
| power7_idle(); |
| if (!generic_check_cpu_restart(cpu)) { |
| DBG("CPU%d Unexpected exit while offline !\n", cpu); |
| /* We may be getting an IPI, so we re-enable |
| * interrupts to process it, it will be ignored |
| * since we aren't online (hopefully) |
| */ |
| local_irq_enable(); |
| local_irq_disable(); |
| } |
| } |
| mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1); |
| DBG("CPU%d coming online...\n", cpu); |
| } |
| |
| #endif /* CONFIG_HOTPLUG_CPU */ |
| |
| static struct smp_ops_t pnv_smp_ops = { |
| .message_pass = smp_muxed_ipi_message_pass, |
| .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */ |
| .probe = xics_smp_probe, |
| .kick_cpu = pnv_smp_kick_cpu, |
| .setup_cpu = pnv_smp_setup_cpu, |
| .cpu_bootable = pnv_smp_cpu_bootable, |
| #ifdef CONFIG_HOTPLUG_CPU |
| .cpu_disable = pnv_smp_cpu_disable, |
| .cpu_die = generic_cpu_die, |
| #endif /* CONFIG_HOTPLUG_CPU */ |
| }; |
| |
| /* This is called very early during platform setup_arch */ |
| void __init pnv_smp_init(void) |
| { |
| smp_ops = &pnv_smp_ops; |
| |
| /* XXX We don't yet have a proper entry point from HAL, for |
| * now we rely on kexec-style entry from BML |
| */ |
| |
| #ifdef CONFIG_PPC_RTAS |
| /* Non-lpar has additional take/give timebase */ |
| if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { |
| smp_ops->give_timebase = rtas_give_timebase; |
| smp_ops->take_timebase = rtas_take_timebase; |
| } |
| #endif /* CONFIG_PPC_RTAS */ |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| ppc_md.cpu_die = pnv_smp_cpu_kill_self; |
| #endif |
| } |