| /* |
| * i2c_adap_pxa.c |
| * |
| * I2C adapter for the PXA I2C bus access. |
| * |
| * Copyright (C) 2002 Intrinsyc Software Inc. |
| * Copyright (C) 2004-2005 Deep Blue Solutions Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * History: |
| * Apr 2002: Initial version [CS] |
| * Jun 2002: Properly separated algo/adap [FB] |
| * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] |
| * Jan 2003: added limited signal handling [Kai-Uwe Bloem] |
| * Sep 2004: Major rework to ensure efficient bus handling [RMK] |
| * Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood] |
| * Feb 2005: Rework slave mode handling [RMK] |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/time.h> |
| #include <linux/sched.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/i2c-pxa.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/i2c/pxa-i2c.h> |
| |
| #include <asm/irq.h> |
| |
| struct pxa_reg_layout { |
| u32 ibmr; |
| u32 idbr; |
| u32 icr; |
| u32 isr; |
| u32 isar; |
| }; |
| |
| enum pxa_i2c_types { |
| REGS_PXA2XX, |
| REGS_PXA3XX, |
| REGS_CE4100, |
| }; |
| |
| /* |
| * I2C registers definitions |
| */ |
| static struct pxa_reg_layout pxa_reg_layout[] = { |
| [REGS_PXA2XX] = { |
| .ibmr = 0x00, |
| .idbr = 0x08, |
| .icr = 0x10, |
| .isr = 0x18, |
| .isar = 0x20, |
| }, |
| [REGS_PXA3XX] = { |
| .ibmr = 0x00, |
| .idbr = 0x04, |
| .icr = 0x08, |
| .isr = 0x0c, |
| .isar = 0x10, |
| }, |
| [REGS_CE4100] = { |
| .ibmr = 0x14, |
| .idbr = 0x0c, |
| .icr = 0x00, |
| .isr = 0x04, |
| /* no isar register */ |
| }, |
| }; |
| |
| static const struct platform_device_id i2c_pxa_id_table[] = { |
| { "pxa2xx-i2c", REGS_PXA2XX }, |
| { "pxa3xx-pwri2c", REGS_PXA3XX }, |
| { "ce4100-i2c", REGS_CE4100 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); |
| |
| /* |
| * I2C bit definitions |
| */ |
| |
| #define ICR_START (1 << 0) /* start bit */ |
| #define ICR_STOP (1 << 1) /* stop bit */ |
| #define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ |
| #define ICR_TB (1 << 3) /* transfer byte bit */ |
| #define ICR_MA (1 << 4) /* master abort */ |
| #define ICR_SCLE (1 << 5) /* master clock enable */ |
| #define ICR_IUE (1 << 6) /* unit enable */ |
| #define ICR_GCD (1 << 7) /* general call disable */ |
| #define ICR_ITEIE (1 << 8) /* enable tx interrupts */ |
| #define ICR_IRFIE (1 << 9) /* enable rx interrupts */ |
| #define ICR_BEIE (1 << 10) /* enable bus error ints */ |
| #define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ |
| #define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ |
| #define ICR_SADIE (1 << 13) /* slave address detected int enable */ |
| #define ICR_UR (1 << 14) /* unit reset */ |
| #define ICR_FM (1 << 15) /* fast mode */ |
| |
| #define ISR_RWM (1 << 0) /* read/write mode */ |
| #define ISR_ACKNAK (1 << 1) /* ack/nak status */ |
| #define ISR_UB (1 << 2) /* unit busy */ |
| #define ISR_IBB (1 << 3) /* bus busy */ |
| #define ISR_SSD (1 << 4) /* slave stop detected */ |
| #define ISR_ALD (1 << 5) /* arbitration loss detected */ |
| #define ISR_ITE (1 << 6) /* tx buffer empty */ |
| #define ISR_IRF (1 << 7) /* rx buffer full */ |
| #define ISR_GCAD (1 << 8) /* general call address detected */ |
| #define ISR_SAD (1 << 9) /* slave address detected */ |
| #define ISR_BED (1 << 10) /* bus error no ACK/NAK */ |
| |
| struct pxa_i2c { |
| spinlock_t lock; |
| wait_queue_head_t wait; |
| struct i2c_msg *msg; |
| unsigned int msg_num; |
| unsigned int msg_idx; |
| unsigned int msg_ptr; |
| unsigned int slave_addr; |
| |
| struct i2c_adapter adap; |
| struct clk *clk; |
| #ifdef CONFIG_I2C_PXA_SLAVE |
| struct i2c_slave_client *slave; |
| #endif |
| |
| unsigned int irqlogidx; |
| u32 isrlog[32]; |
| u32 icrlog[32]; |
| |
| void __iomem *reg_base; |
| void __iomem *reg_ibmr; |
| void __iomem *reg_idbr; |
| void __iomem *reg_icr; |
| void __iomem *reg_isr; |
| void __iomem *reg_isar; |
| |
| unsigned long iobase; |
| unsigned long iosize; |
| |
| int irq; |
| unsigned int use_pio :1; |
| unsigned int fast_mode :1; |
| }; |
| |
| #define _IBMR(i2c) ((i2c)->reg_ibmr) |
| #define _IDBR(i2c) ((i2c)->reg_idbr) |
| #define _ICR(i2c) ((i2c)->reg_icr) |
| #define _ISR(i2c) ((i2c)->reg_isr) |
| #define _ISAR(i2c) ((i2c)->reg_isar) |
| |
| /* |
| * I2C Slave mode address |
| */ |
| #define I2C_PXA_SLAVE_ADDR 0x1 |
| |
| #ifdef DEBUG |
| |
| struct bits { |
| u32 mask; |
| const char *set; |
| const char *unset; |
| }; |
| #define PXA_BIT(m, s, u) { .mask = m, .set = s, .unset = u } |
| |
| static inline void |
| decode_bits(const char *prefix, const struct bits *bits, int num, u32 val) |
| { |
| printk("%s %08x: ", prefix, val); |
| while (num--) { |
| const char *str = val & bits->mask ? bits->set : bits->unset; |
| if (str) |
| printk("%s ", str); |
| bits++; |
| } |
| } |
| |
| static const struct bits isr_bits[] = { |
| PXA_BIT(ISR_RWM, "RX", "TX"), |
| PXA_BIT(ISR_ACKNAK, "NAK", "ACK"), |
| PXA_BIT(ISR_UB, "Bsy", "Rdy"), |
| PXA_BIT(ISR_IBB, "BusBsy", "BusRdy"), |
| PXA_BIT(ISR_SSD, "SlaveStop", NULL), |
| PXA_BIT(ISR_ALD, "ALD", NULL), |
| PXA_BIT(ISR_ITE, "TxEmpty", NULL), |
| PXA_BIT(ISR_IRF, "RxFull", NULL), |
| PXA_BIT(ISR_GCAD, "GenCall", NULL), |
| PXA_BIT(ISR_SAD, "SlaveAddr", NULL), |
| PXA_BIT(ISR_BED, "BusErr", NULL), |
| }; |
| |
| static void decode_ISR(unsigned int val) |
| { |
| decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val); |
| printk("\n"); |
| } |
| |
| static const struct bits icr_bits[] = { |
| PXA_BIT(ICR_START, "START", NULL), |
| PXA_BIT(ICR_STOP, "STOP", NULL), |
| PXA_BIT(ICR_ACKNAK, "ACKNAK", NULL), |
| PXA_BIT(ICR_TB, "TB", NULL), |
| PXA_BIT(ICR_MA, "MA", NULL), |
| PXA_BIT(ICR_SCLE, "SCLE", "scle"), |
| PXA_BIT(ICR_IUE, "IUE", "iue"), |
| PXA_BIT(ICR_GCD, "GCD", NULL), |
| PXA_BIT(ICR_ITEIE, "ITEIE", NULL), |
| PXA_BIT(ICR_IRFIE, "IRFIE", NULL), |
| PXA_BIT(ICR_BEIE, "BEIE", NULL), |
| PXA_BIT(ICR_SSDIE, "SSDIE", NULL), |
| PXA_BIT(ICR_ALDIE, "ALDIE", NULL), |
| PXA_BIT(ICR_SADIE, "SADIE", NULL), |
| PXA_BIT(ICR_UR, "UR", "ur"), |
| }; |
| |
| #ifdef CONFIG_I2C_PXA_SLAVE |
| static void decode_ICR(unsigned int val) |
| { |
| decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val); |
| printk("\n"); |
| } |
| #endif |
| |
| static unsigned int i2c_debug = DEBUG; |
| |
| static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) |
| { |
| dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, |
| readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| } |
| |
| #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__) |
| |
| static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) |
| { |
| unsigned int i; |
| printk(KERN_ERR "i2c: error: %s\n", why); |
| printk(KERN_ERR "i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", |
| i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); |
| printk(KERN_ERR "i2c: ICR: %08x ISR: %08x\n", |
| readl(_ICR(i2c)), readl(_ISR(i2c))); |
| printk(KERN_DEBUG "i2c: log: "); |
| for (i = 0; i < i2c->irqlogidx; i++) |
| printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); |
| printk("\n"); |
| } |
| |
| #else /* ifdef DEBUG */ |
| |
| #define i2c_debug 0 |
| |
| #define show_state(i2c) do { } while (0) |
| #define decode_ISR(val) do { } while (0) |
| #define decode_ICR(val) do { } while (0) |
| #define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0) |
| |
| #endif /* ifdef DEBUG / else */ |
| |
| static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); |
| static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); |
| |
| static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) |
| { |
| return !(readl(_ICR(i2c)) & ICR_SCLE); |
| } |
| |
| static void i2c_pxa_abort(struct pxa_i2c *i2c) |
| { |
| int i = 250; |
| |
| if (i2c_pxa_is_slavemode(i2c)) { |
| dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__); |
| return; |
| } |
| |
| while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) { |
| unsigned long icr = readl(_ICR(i2c)); |
| |
| icr &= ~ICR_START; |
| icr |= ICR_ACKNAK | ICR_STOP | ICR_TB; |
| |
| writel(icr, _ICR(i2c)); |
| |
| show_state(i2c); |
| |
| mdelay(1); |
| i --; |
| } |
| |
| writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), |
| _ICR(i2c)); |
| } |
| |
| static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) |
| { |
| int timeout = DEF_TIMEOUT; |
| |
| while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { |
| if ((readl(_ISR(i2c)) & ISR_SAD) != 0) |
| timeout += 4; |
| |
| msleep(2); |
| show_state(i2c); |
| } |
| |
| if (timeout < 0) |
| show_state(i2c); |
| |
| return timeout < 0 ? I2C_RETRY : 0; |
| } |
| |
| static int i2c_pxa_wait_master(struct pxa_i2c *i2c) |
| { |
| unsigned long timeout = jiffies + HZ*4; |
| |
| while (time_before(jiffies, timeout)) { |
| if (i2c_debug > 1) |
| dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
| __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| |
| if (readl(_ISR(i2c)) & ISR_SAD) { |
| if (i2c_debug > 0) |
| dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__); |
| goto out; |
| } |
| |
| /* wait for unit and bus being not busy, and we also do a |
| * quick check of the i2c lines themselves to ensure they've |
| * gone high... |
| */ |
| if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) { |
| if (i2c_debug > 0) |
| dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); |
| return 1; |
| } |
| |
| msleep(1); |
| } |
| |
| if (i2c_debug > 0) |
| dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); |
| out: |
| return 0; |
| } |
| |
| static int i2c_pxa_set_master(struct pxa_i2c *i2c) |
| { |
| if (i2c_debug) |
| dev_dbg(&i2c->adap.dev, "setting to bus master\n"); |
| |
| if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) { |
| dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__); |
| if (!i2c_pxa_wait_master(i2c)) { |
| dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__); |
| return I2C_RETRY; |
| } |
| } |
| |
| writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); |
| return 0; |
| } |
| |
| #ifdef CONFIG_I2C_PXA_SLAVE |
| static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) |
| { |
| unsigned long timeout = jiffies + HZ*1; |
| |
| /* wait for stop */ |
| |
| show_state(i2c); |
| |
| while (time_before(jiffies, timeout)) { |
| if (i2c_debug > 1) |
| dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
| __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| |
| if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 || |
| (readl(_ISR(i2c)) & ISR_SAD) != 0 || |
| (readl(_ICR(i2c)) & ICR_SCLE) == 0) { |
| if (i2c_debug > 1) |
| dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); |
| return 1; |
| } |
| |
| msleep(1); |
| } |
| |
| if (i2c_debug > 0) |
| dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); |
| return 0; |
| } |
| |
| /* |
| * clear the hold on the bus, and take of anything else |
| * that has been configured |
| */ |
| static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) |
| { |
| show_state(i2c); |
| |
| if (errcode < 0) { |
| udelay(100); /* simple delay */ |
| } else { |
| /* we need to wait for the stop condition to end */ |
| |
| /* if we where in stop, then clear... */ |
| if (readl(_ICR(i2c)) & ICR_STOP) { |
| udelay(100); |
| writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c)); |
| } |
| |
| if (!i2c_pxa_wait_slave(i2c)) { |
| dev_err(&i2c->adap.dev, "%s: wait timedout\n", |
| __func__); |
| return; |
| } |
| } |
| |
| writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c)); |
| writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
| |
| if (i2c_debug) { |
| dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c))); |
| decode_ICR(readl(_ICR(i2c))); |
| } |
| } |
| #else |
| #define i2c_pxa_set_slave(i2c, err) do { } while (0) |
| #endif |
| |
| static void i2c_pxa_reset(struct pxa_i2c *i2c) |
| { |
| pr_debug("Resetting I2C Controller Unit\n"); |
| |
| /* abort any transfer currently under way */ |
| i2c_pxa_abort(i2c); |
| |
| /* reset according to 9.8 */ |
| writel(ICR_UR, _ICR(i2c)); |
| writel(I2C_ISR_INIT, _ISR(i2c)); |
| writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); |
| |
| if (i2c->reg_isar) |
| writel(i2c->slave_addr, _ISAR(i2c)); |
| |
| /* set control register values */ |
| writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); |
| |
| #ifdef CONFIG_I2C_PXA_SLAVE |
| dev_info(&i2c->adap.dev, "Enabling slave mode\n"); |
| writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c)); |
| #endif |
| |
| i2c_pxa_set_slave(i2c, 0); |
| |
| /* enable unit */ |
| writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); |
| udelay(100); |
| } |
| |
| |
| #ifdef CONFIG_I2C_PXA_SLAVE |
| /* |
| * PXA I2C Slave mode |
| */ |
| |
| static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) |
| { |
| if (isr & ISR_BED) { |
| /* what should we do here? */ |
| } else { |
| int ret = 0; |
| |
| if (i2c->slave != NULL) |
| ret = i2c->slave->read(i2c->slave->data); |
| |
| writel(ret, _IDBR(i2c)); |
| writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */ |
| } |
| } |
| |
| static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) |
| { |
| unsigned int byte = readl(_IDBR(i2c)); |
| |
| if (i2c->slave != NULL) |
| i2c->slave->write(i2c->slave->data, byte); |
| |
| writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
| } |
| |
| static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) |
| { |
| int timeout; |
| |
| if (i2c_debug > 0) |
| dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n", |
| (isr & ISR_RWM) ? 'r' : 't'); |
| |
| if (i2c->slave != NULL) |
| i2c->slave->event(i2c->slave->data, |
| (isr & ISR_RWM) ? I2C_SLAVE_EVENT_START_READ : I2C_SLAVE_EVENT_START_WRITE); |
| |
| /* |
| * slave could interrupt in the middle of us generating a |
| * start condition... if this happens, we'd better back off |
| * and stop holding the poor thing up |
| */ |
| writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); |
| writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
| |
| timeout = 0x10000; |
| |
| while (1) { |
| if ((readl(_IBMR(i2c)) & 2) == 2) |
| break; |
| |
| timeout--; |
| |
| if (timeout <= 0) { |
| dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); |
| break; |
| } |
| } |
| |
| writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
| } |
| |
| static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) |
| { |
| if (i2c_debug > 2) |
| dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n"); |
| |
| if (i2c->slave != NULL) |
| i2c->slave->event(i2c->slave->data, I2C_SLAVE_EVENT_STOP); |
| |
| if (i2c_debug > 2) |
| dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n"); |
| |
| /* |
| * If we have a master-mode message waiting, |
| * kick it off now that the slave has completed. |
| */ |
| if (i2c->msg) |
| i2c_pxa_master_complete(i2c, I2C_RETRY); |
| } |
| #else |
| static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) |
| { |
| if (isr & ISR_BED) { |
| /* what should we do here? */ |
| } else { |
| writel(0, _IDBR(i2c)); |
| writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); |
| } |
| } |
| |
| static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) |
| { |
| writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); |
| } |
| |
| static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) |
| { |
| int timeout; |
| |
| /* |
| * slave could interrupt in the middle of us generating a |
| * start condition... if this happens, we'd better back off |
| * and stop holding the poor thing up |
| */ |
| writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); |
| writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); |
| |
| timeout = 0x10000; |
| |
| while (1) { |
| if ((readl(_IBMR(i2c)) & 2) == 2) |
| break; |
| |
| timeout--; |
| |
| if (timeout <= 0) { |
| dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); |
| break; |
| } |
| } |
| |
| writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); |
| } |
| |
| static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) |
| { |
| if (i2c->msg) |
| i2c_pxa_master_complete(i2c, I2C_RETRY); |
| } |
| #endif |
| |
| /* |
| * PXA I2C Master mode |
| */ |
| |
| static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg) |
| { |
| unsigned int addr = (msg->addr & 0x7f) << 1; |
| |
| if (msg->flags & I2C_M_RD) |
| addr |= 1; |
| |
| return addr; |
| } |
| |
| static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) |
| { |
| u32 icr; |
| |
| /* |
| * Step 1: target slave address into IDBR |
| */ |
| writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); |
| |
| /* |
| * Step 2: initiate the write. |
| */ |
| icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); |
| writel(icr | ICR_START | ICR_TB, _ICR(i2c)); |
| } |
| |
| static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) |
| { |
| u32 icr; |
| |
| /* |
| * Clear the STOP and ACK flags |
| */ |
| icr = readl(_ICR(i2c)); |
| icr &= ~(ICR_STOP | ICR_ACKNAK); |
| writel(icr, _ICR(i2c)); |
| } |
| |
| static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) |
| { |
| /* make timeout the same as for interrupt based functions */ |
| long timeout = 2 * DEF_TIMEOUT; |
| |
| /* |
| * Wait for the bus to become free. |
| */ |
| while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { |
| udelay(1000); |
| show_state(i2c); |
| } |
| |
| if (timeout < 0) { |
| show_state(i2c); |
| dev_err(&i2c->adap.dev, |
| "i2c_pxa: timeout waiting for bus free\n"); |
| return I2C_RETRY; |
| } |
| |
| /* |
| * Set master mode. |
| */ |
| writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); |
| |
| return 0; |
| } |
| |
| static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, |
| struct i2c_msg *msg, int num) |
| { |
| unsigned long timeout = 500000; /* 5 seconds */ |
| int ret = 0; |
| |
| ret = i2c_pxa_pio_set_master(i2c); |
| if (ret) |
| goto out; |
| |
| i2c->msg = msg; |
| i2c->msg_num = num; |
| i2c->msg_idx = 0; |
| i2c->msg_ptr = 0; |
| i2c->irqlogidx = 0; |
| |
| i2c_pxa_start_message(i2c); |
| |
| while (i2c->msg_num > 0 && --timeout) { |
| i2c_pxa_handler(0, i2c); |
| udelay(10); |
| } |
| |
| i2c_pxa_stop_message(i2c); |
| |
| /* |
| * We place the return code in i2c->msg_idx. |
| */ |
| ret = i2c->msg_idx; |
| |
| out: |
| if (timeout == 0) |
| i2c_pxa_scream_blue_murder(i2c, "timeout"); |
| |
| return ret; |
| } |
| |
| /* |
| * We are protected by the adapter bus mutex. |
| */ |
| static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) |
| { |
| long timeout; |
| int ret; |
| |
| /* |
| * Wait for the bus to become free. |
| */ |
| ret = i2c_pxa_wait_bus_not_busy(i2c); |
| if (ret) { |
| dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); |
| goto out; |
| } |
| |
| /* |
| * Set master mode. |
| */ |
| ret = i2c_pxa_set_master(i2c); |
| if (ret) { |
| dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); |
| goto out; |
| } |
| |
| spin_lock_irq(&i2c->lock); |
| |
| i2c->msg = msg; |
| i2c->msg_num = num; |
| i2c->msg_idx = 0; |
| i2c->msg_ptr = 0; |
| i2c->irqlogidx = 0; |
| |
| i2c_pxa_start_message(i2c); |
| |
| spin_unlock_irq(&i2c->lock); |
| |
| /* |
| * The rest of the processing occurs in the interrupt handler. |
| */ |
| timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); |
| i2c_pxa_stop_message(i2c); |
| |
| /* |
| * We place the return code in i2c->msg_idx. |
| */ |
| ret = i2c->msg_idx; |
| |
| if (!timeout && i2c->msg_num) { |
| i2c_pxa_scream_blue_murder(i2c, "timeout"); |
| ret = I2C_RETRY; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, |
| struct i2c_msg msgs[], int num) |
| { |
| struct pxa_i2c *i2c = adap->algo_data; |
| int ret, i; |
| |
| /* If the I2C controller is disabled we need to reset it |
| (probably due to a suspend/resume destroying state). We do |
| this here as we can then avoid worrying about resuming the |
| controller before its users. */ |
| if (!(readl(_ICR(i2c)) & ICR_IUE)) |
| i2c_pxa_reset(i2c); |
| |
| for (i = adap->retries; i >= 0; i--) { |
| ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); |
| if (ret != I2C_RETRY) |
| goto out; |
| |
| if (i2c_debug) |
| dev_dbg(&adap->dev, "Retrying transmission\n"); |
| udelay(100); |
| } |
| i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); |
| ret = -EREMOTEIO; |
| out: |
| i2c_pxa_set_slave(i2c, ret); |
| return ret; |
| } |
| |
| /* |
| * i2c_pxa_master_complete - complete the message and wake up. |
| */ |
| static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) |
| { |
| i2c->msg_ptr = 0; |
| i2c->msg = NULL; |
| i2c->msg_idx ++; |
| i2c->msg_num = 0; |
| if (ret) |
| i2c->msg_idx = ret; |
| if (!i2c->use_pio) |
| wake_up(&i2c->wait); |
| } |
| |
| static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) |
| { |
| u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); |
| |
| again: |
| /* |
| * If ISR_ALD is set, we lost arbitration. |
| */ |
| if (isr & ISR_ALD) { |
| /* |
| * Do we need to do anything here? The PXA docs |
| * are vague about what happens. |
| */ |
| i2c_pxa_scream_blue_murder(i2c, "ALD set"); |
| |
| /* |
| * We ignore this error. We seem to see spurious ALDs |
| * for seemingly no reason. If we handle them as I think |
| * they should, we end up causing an I2C error, which |
| * is painful for some systems. |
| */ |
| return; /* ignore */ |
| } |
| |
| if (isr & ISR_BED) { |
| int ret = BUS_ERROR; |
| |
| /* |
| * I2C bus error - either the device NAK'd us, or |
| * something more serious happened. If we were NAK'd |
| * on the initial address phase, we can retry. |
| */ |
| if (isr & ISR_ACKNAK) { |
| if (i2c->msg_ptr == 0 && i2c->msg_idx == 0) |
| ret = I2C_RETRY; |
| else |
| ret = XFER_NAKED; |
| } |
| i2c_pxa_master_complete(i2c, ret); |
| } else if (isr & ISR_RWM) { |
| /* |
| * Read mode. We have just sent the address byte, and |
| * now we must initiate the transfer. |
| */ |
| if (i2c->msg_ptr == i2c->msg->len - 1 && |
| i2c->msg_idx == i2c->msg_num - 1) |
| icr |= ICR_STOP | ICR_ACKNAK; |
| |
| icr |= ICR_ALDIE | ICR_TB; |
| } else if (i2c->msg_ptr < i2c->msg->len) { |
| /* |
| * Write mode. Write the next data byte. |
| */ |
| writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c)); |
| |
| icr |= ICR_ALDIE | ICR_TB; |
| |
| /* |
| * If this is the last byte of the last message, send |
| * a STOP. |
| */ |
| if (i2c->msg_ptr == i2c->msg->len && |
| i2c->msg_idx == i2c->msg_num - 1) |
| icr |= ICR_STOP; |
| } else if (i2c->msg_idx < i2c->msg_num - 1) { |
| /* |
| * Next segment of the message. |
| */ |
| i2c->msg_ptr = 0; |
| i2c->msg_idx ++; |
| i2c->msg++; |
| |
| /* |
| * If we aren't doing a repeated start and address, |
| * go back and try to send the next byte. Note that |
| * we do not support switching the R/W direction here. |
| */ |
| if (i2c->msg->flags & I2C_M_NOSTART) |
| goto again; |
| |
| /* |
| * Write the next address. |
| */ |
| writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); |
| |
| /* |
| * And trigger a repeated start, and send the byte. |
| */ |
| icr &= ~ICR_ALDIE; |
| icr |= ICR_START | ICR_TB; |
| } else { |
| if (i2c->msg->len == 0) { |
| /* |
| * Device probes have a message length of zero |
| * and need the bus to be reset before it can |
| * be used again. |
| */ |
| i2c_pxa_reset(i2c); |
| } |
| i2c_pxa_master_complete(i2c, 0); |
| } |
| |
| i2c->icrlog[i2c->irqlogidx-1] = icr; |
| |
| writel(icr, _ICR(i2c)); |
| show_state(i2c); |
| } |
| |
| static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) |
| { |
| u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); |
| |
| /* |
| * Read the byte. |
| */ |
| i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c)); |
| |
| if (i2c->msg_ptr < i2c->msg->len) { |
| /* |
| * If this is the last byte of the last |
| * message, send a STOP. |
| */ |
| if (i2c->msg_ptr == i2c->msg->len - 1) |
| icr |= ICR_STOP | ICR_ACKNAK; |
| |
| icr |= ICR_ALDIE | ICR_TB; |
| } else { |
| i2c_pxa_master_complete(i2c, 0); |
| } |
| |
| i2c->icrlog[i2c->irqlogidx-1] = icr; |
| |
| writel(icr, _ICR(i2c)); |
| } |
| |
| #define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \ |
| ISR_SAD | ISR_BED) |
| static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) |
| { |
| struct pxa_i2c *i2c = dev_id; |
| u32 isr = readl(_ISR(i2c)); |
| |
| if (!(isr & VALID_INT_SOURCE)) |
| return IRQ_NONE; |
| |
| if (i2c_debug > 2 && 0) { |
| dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", |
| __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); |
| decode_ISR(isr); |
| } |
| |
| if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog)) |
| i2c->isrlog[i2c->irqlogidx++] = isr; |
| |
| show_state(i2c); |
| |
| /* |
| * Always clear all pending IRQs. |
| */ |
| writel(isr & VALID_INT_SOURCE, _ISR(i2c)); |
| |
| if (isr & ISR_SAD) |
| i2c_pxa_slave_start(i2c, isr); |
| if (isr & ISR_SSD) |
| i2c_pxa_slave_stop(i2c); |
| |
| if (i2c_pxa_is_slavemode(i2c)) { |
| if (isr & ISR_ITE) |
| i2c_pxa_slave_txempty(i2c, isr); |
| if (isr & ISR_IRF) |
| i2c_pxa_slave_rxfull(i2c, isr); |
| } else if (i2c->msg) { |
| if (isr & ISR_ITE) |
| i2c_pxa_irq_txempty(i2c, isr); |
| if (isr & ISR_IRF) |
| i2c_pxa_irq_rxfull(i2c, isr); |
| } else { |
| i2c_pxa_scream_blue_murder(i2c, "spurious irq"); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) |
| { |
| struct pxa_i2c *i2c = adap->algo_data; |
| int ret, i; |
| |
| for (i = adap->retries; i >= 0; i--) { |
| ret = i2c_pxa_do_xfer(i2c, msgs, num); |
| if (ret != I2C_RETRY) |
| goto out; |
| |
| if (i2c_debug) |
| dev_dbg(&adap->dev, "Retrying transmission\n"); |
| udelay(100); |
| } |
| i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); |
| ret = -EREMOTEIO; |
| out: |
| i2c_pxa_set_slave(i2c, ret); |
| return ret; |
| } |
| |
| static u32 i2c_pxa_functionality(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm i2c_pxa_algorithm = { |
| .master_xfer = i2c_pxa_xfer, |
| .functionality = i2c_pxa_functionality, |
| }; |
| |
| static const struct i2c_algorithm i2c_pxa_pio_algorithm = { |
| .master_xfer = i2c_pxa_pio_xfer, |
| .functionality = i2c_pxa_functionality, |
| }; |
| |
| static struct of_device_id i2c_pxa_dt_ids[] = { |
| { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, |
| { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, |
| { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); |
| |
| static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, |
| enum pxa_i2c_types *i2c_types) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| const struct of_device_id *of_id = |
| of_match_device(i2c_pxa_dt_ids, &pdev->dev); |
| int ret; |
| |
| if (!of_id) |
| return 1; |
| ret = of_alias_get_id(np, "i2c"); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); |
| return ret; |
| } |
| pdev->id = ret; |
| if (of_get_property(np, "mrvl,i2c-polling", NULL)) |
| i2c->use_pio = 1; |
| if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) |
| i2c->fast_mode = 1; |
| *i2c_types = (u32)(of_id->data); |
| return 0; |
| } |
| |
| static int i2c_pxa_probe_pdata(struct platform_device *pdev, |
| struct pxa_i2c *i2c, |
| enum pxa_i2c_types *i2c_types) |
| { |
| struct i2c_pxa_platform_data *plat = pdev->dev.platform_data; |
| const struct platform_device_id *id = platform_get_device_id(pdev); |
| |
| *i2c_types = id->driver_data; |
| if (plat) { |
| i2c->use_pio = plat->use_pio; |
| i2c->fast_mode = plat->fast_mode; |
| } |
| return 0; |
| } |
| |
| static int i2c_pxa_probe(struct platform_device *dev) |
| { |
| struct i2c_pxa_platform_data *plat = dev->dev.platform_data; |
| enum pxa_i2c_types i2c_type; |
| struct pxa_i2c *i2c; |
| struct resource *res = NULL; |
| int ret, irq; |
| |
| i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); |
| if (!i2c) { |
| ret = -ENOMEM; |
| goto emalloc; |
| } |
| |
| ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); |
| if (ret > 0) |
| ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); |
| if (ret < 0) |
| goto eclk; |
| |
| res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| irq = platform_get_irq(dev, 0); |
| if (res == NULL || irq < 0) { |
| ret = -ENODEV; |
| goto eclk; |
| } |
| |
| if (!request_mem_region(res->start, resource_size(res), res->name)) { |
| ret = -ENOMEM; |
| goto eclk; |
| } |
| |
| i2c->adap.owner = THIS_MODULE; |
| i2c->adap.retries = 5; |
| |
| spin_lock_init(&i2c->lock); |
| init_waitqueue_head(&i2c->wait); |
| |
| i2c->adap.nr = dev->id; |
| snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", |
| i2c->adap.nr); |
| |
| i2c->clk = clk_get(&dev->dev, NULL); |
| if (IS_ERR(i2c->clk)) { |
| ret = PTR_ERR(i2c->clk); |
| goto eclk; |
| } |
| |
| i2c->reg_base = ioremap(res->start, resource_size(res)); |
| if (!i2c->reg_base) { |
| ret = -EIO; |
| goto eremap; |
| } |
| |
| i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; |
| i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr; |
| i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr; |
| i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr; |
| if (i2c_type != REGS_CE4100) |
| i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; |
| |
| i2c->iobase = res->start; |
| i2c->iosize = resource_size(res); |
| |
| i2c->irq = irq; |
| |
| i2c->slave_addr = I2C_PXA_SLAVE_ADDR; |
| |
| if (plat) { |
| #ifdef CONFIG_I2C_PXA_SLAVE |
| i2c->slave_addr = plat->slave_addr; |
| i2c->slave = plat->slave; |
| #endif |
| i2c->adap.class = plat->class; |
| } |
| |
| clk_enable(i2c->clk); |
| |
| if (i2c->use_pio) { |
| i2c->adap.algo = &i2c_pxa_pio_algorithm; |
| } else { |
| i2c->adap.algo = &i2c_pxa_algorithm; |
| ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED, |
| i2c->adap.name, i2c); |
| if (ret) |
| goto ereqirq; |
| } |
| |
| i2c_pxa_reset(i2c); |
| |
| i2c->adap.algo_data = i2c; |
| i2c->adap.dev.parent = &dev->dev; |
| #ifdef CONFIG_OF |
| i2c->adap.dev.of_node = dev->dev.of_node; |
| #endif |
| |
| ret = i2c_add_numbered_adapter(&i2c->adap); |
| if (ret < 0) { |
| printk(KERN_INFO "I2C: Failed to add bus\n"); |
| goto eadapt; |
| } |
| of_i2c_register_devices(&i2c->adap); |
| |
| platform_set_drvdata(dev, i2c); |
| |
| #ifdef CONFIG_I2C_PXA_SLAVE |
| printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n", |
| dev_name(&i2c->adap.dev), i2c->slave_addr); |
| #else |
| printk(KERN_INFO "I2C: %s: PXA I2C adapter\n", |
| dev_name(&i2c->adap.dev)); |
| #endif |
| return 0; |
| |
| eadapt: |
| if (!i2c->use_pio) |
| free_irq(irq, i2c); |
| ereqirq: |
| clk_disable(i2c->clk); |
| iounmap(i2c->reg_base); |
| eremap: |
| clk_put(i2c->clk); |
| eclk: |
| kfree(i2c); |
| emalloc: |
| release_mem_region(res->start, resource_size(res)); |
| return ret; |
| } |
| |
| static int __exit i2c_pxa_remove(struct platform_device *dev) |
| { |
| struct pxa_i2c *i2c = platform_get_drvdata(dev); |
| |
| platform_set_drvdata(dev, NULL); |
| |
| i2c_del_adapter(&i2c->adap); |
| if (!i2c->use_pio) |
| free_irq(i2c->irq, i2c); |
| |
| clk_disable(i2c->clk); |
| clk_put(i2c->clk); |
| |
| iounmap(i2c->reg_base); |
| release_mem_region(i2c->iobase, i2c->iosize); |
| kfree(i2c); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int i2c_pxa_suspend_noirq(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct pxa_i2c *i2c = platform_get_drvdata(pdev); |
| |
| clk_disable(i2c->clk); |
| |
| return 0; |
| } |
| |
| static int i2c_pxa_resume_noirq(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct pxa_i2c *i2c = platform_get_drvdata(pdev); |
| |
| clk_enable(i2c->clk); |
| i2c_pxa_reset(i2c); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops i2c_pxa_dev_pm_ops = { |
| .suspend_noirq = i2c_pxa_suspend_noirq, |
| .resume_noirq = i2c_pxa_resume_noirq, |
| }; |
| |
| #define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops) |
| #else |
| #define I2C_PXA_DEV_PM_OPS NULL |
| #endif |
| |
| static struct platform_driver i2c_pxa_driver = { |
| .probe = i2c_pxa_probe, |
| .remove = __exit_p(i2c_pxa_remove), |
| .driver = { |
| .name = "pxa2xx-i2c", |
| .owner = THIS_MODULE, |
| .pm = I2C_PXA_DEV_PM_OPS, |
| .of_match_table = i2c_pxa_dt_ids, |
| }, |
| .id_table = i2c_pxa_id_table, |
| }; |
| |
| static int __init i2c_adap_pxa_init(void) |
| { |
| return platform_driver_register(&i2c_pxa_driver); |
| } |
| |
| static void __exit i2c_adap_pxa_exit(void) |
| { |
| platform_driver_unregister(&i2c_pxa_driver); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pxa2xx-i2c"); |
| |
| subsys_initcall(i2c_adap_pxa_init); |
| module_exit(i2c_adap_pxa_exit); |