| /* Pseudo NMI support on sparc64 systems. |
| * |
| * Copyright (C) 2009 David S. Miller <davem@davemloft.net> |
| * |
| * The NMI watchdog support and infrastructure is based almost |
| * entirely upon the x86 NMI support code. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/init.h> |
| #include <linux/percpu.h> |
| #include <linux/nmi.h> |
| #include <linux/module.h> |
| #include <linux/kprobes.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/reboot.h> |
| #include <linux/slab.h> |
| #include <linux/kdebug.h> |
| #include <linux/delay.h> |
| #include <linux/smp.h> |
| |
| #include <asm/perf_event.h> |
| #include <asm/ptrace.h> |
| #include <asm/local.h> |
| #include <asm/pcr.h> |
| |
| /* We don't have a real NMI on sparc64, but we can fake one |
| * up using profiling counter overflow interrupts and interrupt |
| * levels. |
| * |
| * The profile overflow interrupts at level 15, so we use |
| * level 14 as our IRQ off level. |
| */ |
| |
| static int panic_on_timeout; |
| |
| /* nmi_active: |
| * >0: the NMI watchdog is active, but can be disabled |
| * <0: the NMI watchdog has not been set up, and cannot be enabled |
| * 0: the NMI watchdog is disabled, but can be enabled |
| */ |
| atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ |
| EXPORT_SYMBOL(nmi_active); |
| |
| static unsigned int nmi_hz = HZ; |
| static DEFINE_PER_CPU(short, wd_enabled); |
| static int endflag __initdata; |
| |
| static DEFINE_PER_CPU(unsigned int, last_irq_sum); |
| static DEFINE_PER_CPU(long, alert_counter); |
| static DEFINE_PER_CPU(int, nmi_touch); |
| |
| void touch_nmi_watchdog(void) |
| { |
| if (atomic_read(&nmi_active)) { |
| int cpu; |
| |
| for_each_present_cpu(cpu) { |
| if (per_cpu(nmi_touch, cpu) != 1) |
| per_cpu(nmi_touch, cpu) = 1; |
| } |
| } |
| |
| touch_softlockup_watchdog(); |
| } |
| EXPORT_SYMBOL(touch_nmi_watchdog); |
| |
| static void die_nmi(const char *str, struct pt_regs *regs, int do_panic) |
| { |
| if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, |
| pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) |
| return; |
| |
| console_verbose(); |
| bust_spinlocks(1); |
| |
| printk(KERN_EMERG "%s", str); |
| printk(" on CPU%d, ip %08lx, registers:\n", |
| smp_processor_id(), regs->tpc); |
| show_regs(regs); |
| dump_stack(); |
| |
| bust_spinlocks(0); |
| |
| if (do_panic || panic_on_oops) |
| panic("Non maskable interrupt"); |
| |
| nmi_exit(); |
| local_irq_enable(); |
| do_exit(SIGBUS); |
| } |
| |
| notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) |
| { |
| unsigned int sum, touched = 0; |
| int cpu = smp_processor_id(); |
| |
| clear_softint(1 << irq); |
| pcr_ops->write(PCR_PIC_PRIV); |
| |
| local_cpu_data().__nmi_count++; |
| |
| nmi_enter(); |
| |
| if (notify_die(DIE_NMI, "nmi", regs, 0, |
| pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP) |
| touched = 1; |
| |
| sum = kstat_irqs_cpu(0, cpu); |
| if (__get_cpu_var(nmi_touch)) { |
| __get_cpu_var(nmi_touch) = 0; |
| touched = 1; |
| } |
| if (!touched && __get_cpu_var(last_irq_sum) == sum) { |
| __this_cpu_inc(per_cpu_var(alert_counter)); |
| if (__this_cpu_read(per_cpu_var(alert_counter)) == 30 * nmi_hz) |
| die_nmi("BUG: NMI Watchdog detected LOCKUP", |
| regs, panic_on_timeout); |
| } else { |
| __get_cpu_var(last_irq_sum) = sum; |
| __this_cpu_write(per_cpu_var(alert_counter), 0); |
| } |
| if (__get_cpu_var(wd_enabled)) { |
| write_pic(picl_value(nmi_hz)); |
| pcr_ops->write(pcr_enable); |
| } |
| |
| nmi_exit(); |
| } |
| |
| static inline unsigned int get_nmi_count(int cpu) |
| { |
| return cpu_data(cpu).__nmi_count; |
| } |
| |
| static __init void nmi_cpu_busy(void *data) |
| { |
| local_irq_enable_in_hardirq(); |
| while (endflag == 0) |
| mb(); |
| } |
| |
| static void report_broken_nmi(int cpu, int *prev_nmi_count) |
| { |
| printk(KERN_CONT "\n"); |
| |
| printk(KERN_WARNING |
| "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", |
| cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); |
| |
| printk(KERN_WARNING |
| "Please report this to bugzilla.kernel.org,\n"); |
| printk(KERN_WARNING |
| "and attach the output of the 'dmesg' command.\n"); |
| |
| per_cpu(wd_enabled, cpu) = 0; |
| atomic_dec(&nmi_active); |
| } |
| |
| void stop_nmi_watchdog(void *unused) |
| { |
| pcr_ops->write(PCR_PIC_PRIV); |
| __get_cpu_var(wd_enabled) = 0; |
| atomic_dec(&nmi_active); |
| } |
| |
| static int __init check_nmi_watchdog(void) |
| { |
| unsigned int *prev_nmi_count; |
| int cpu, err; |
| |
| if (!atomic_read(&nmi_active)) |
| return 0; |
| |
| prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL); |
| if (!prev_nmi_count) { |
| err = -ENOMEM; |
| goto error; |
| } |
| |
| printk(KERN_INFO "Testing NMI watchdog ... "); |
| |
| smp_call_function(nmi_cpu_busy, (void *)&endflag, 0); |
| |
| for_each_possible_cpu(cpu) |
| prev_nmi_count[cpu] = get_nmi_count(cpu); |
| local_irq_enable(); |
| mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ |
| |
| for_each_online_cpu(cpu) { |
| if (!per_cpu(wd_enabled, cpu)) |
| continue; |
| if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) |
| report_broken_nmi(cpu, prev_nmi_count); |
| } |
| endflag = 1; |
| if (!atomic_read(&nmi_active)) { |
| kfree(prev_nmi_count); |
| atomic_set(&nmi_active, -1); |
| err = -ENODEV; |
| goto error; |
| } |
| printk("OK.\n"); |
| |
| nmi_hz = 1; |
| |
| kfree(prev_nmi_count); |
| return 0; |
| error: |
| on_each_cpu(stop_nmi_watchdog, NULL, 1); |
| return err; |
| } |
| |
| void start_nmi_watchdog(void *unused) |
| { |
| __get_cpu_var(wd_enabled) = 1; |
| atomic_inc(&nmi_active); |
| |
| pcr_ops->write(PCR_PIC_PRIV); |
| write_pic(picl_value(nmi_hz)); |
| |
| pcr_ops->write(pcr_enable); |
| } |
| |
| static void nmi_adjust_hz_one(void *unused) |
| { |
| if (!__get_cpu_var(wd_enabled)) |
| return; |
| |
| pcr_ops->write(PCR_PIC_PRIV); |
| write_pic(picl_value(nmi_hz)); |
| |
| pcr_ops->write(pcr_enable); |
| } |
| |
| void nmi_adjust_hz(unsigned int new_hz) |
| { |
| nmi_hz = new_hz; |
| on_each_cpu(nmi_adjust_hz_one, NULL, 1); |
| } |
| EXPORT_SYMBOL_GPL(nmi_adjust_hz); |
| |
| static int nmi_shutdown(struct notifier_block *nb, unsigned long cmd, void *p) |
| { |
| on_each_cpu(stop_nmi_watchdog, NULL, 1); |
| return 0; |
| } |
| |
| static struct notifier_block nmi_reboot_notifier = { |
| .notifier_call = nmi_shutdown, |
| }; |
| |
| int __init nmi_init(void) |
| { |
| int err; |
| |
| on_each_cpu(start_nmi_watchdog, NULL, 1); |
| |
| err = check_nmi_watchdog(); |
| if (!err) { |
| err = register_reboot_notifier(&nmi_reboot_notifier); |
| if (err) { |
| on_each_cpu(stop_nmi_watchdog, NULL, 1); |
| atomic_set(&nmi_active, -1); |
| } |
| } |
| if (!err) |
| init_hw_perf_events(); |
| |
| return err; |
| } |
| |
| static int __init setup_nmi_watchdog(char *str) |
| { |
| if (!strncmp(str, "panic", 5)) |
| panic_on_timeout = 1; |
| |
| return 0; |
| } |
| __setup("nmi_watchdog=", setup_nmi_watchdog); |