| /* |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/preempt.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/kprobes.h> |
| #include <linux/elfcore.h> |
| #include <linux/tick.h> |
| #include <linux/init.h> |
| #include <linux/mm.h> |
| #include <linux/compat.h> |
| #include <linux/hardirq.h> |
| #include <linux/syscalls.h> |
| #include <linux/kernel.h> |
| #include <linux/tracehook.h> |
| #include <linux/signal.h> |
| #include <linux/delay.h> |
| #include <linux/context_tracking.h> |
| #include <asm/stack.h> |
| #include <asm/switch_to.h> |
| #include <asm/homecache.h> |
| #include <asm/syscalls.h> |
| #include <asm/traps.h> |
| #include <asm/setup.h> |
| #include <asm/uaccess.h> |
| #ifdef CONFIG_HARDWALL |
| #include <asm/hardwall.h> |
| #endif |
| #include <arch/chip.h> |
| #include <arch/abi.h> |
| #include <arch/sim_def.h> |
| |
| /* |
| * Use the (x86) "idle=poll" option to prefer low latency when leaving the |
| * idle loop over low power while in the idle loop, e.g. if we have |
| * one thread per core and we want to get threads out of futex waits fast. |
| */ |
| static int __init idle_setup(char *str) |
| { |
| if (!str) |
| return -EINVAL; |
| |
| if (!strcmp(str, "poll")) { |
| pr_info("using polling idle threads\n"); |
| cpu_idle_poll_ctrl(true); |
| return 0; |
| } else if (!strcmp(str, "halt")) { |
| return 0; |
| } |
| return -1; |
| } |
| early_param("idle", idle_setup); |
| |
| void arch_cpu_idle(void) |
| { |
| __this_cpu_write(irq_stat.idle_timestamp, jiffies); |
| _cpu_idle(); |
| } |
| |
| /* |
| * Release a thread_info structure |
| */ |
| void arch_release_thread_stack(unsigned long *stack) |
| { |
| struct thread_info *info = (void *)stack; |
| struct single_step_state *step_state = info->step_state; |
| |
| if (step_state) { |
| |
| /* |
| * FIXME: we don't munmap step_state->buffer |
| * because the mm_struct for this process (info->task->mm) |
| * has already been zeroed in exit_mm(). Keeping a |
| * reference to it here seems like a bad move, so this |
| * means we can't munmap() the buffer, and therefore if we |
| * ptrace multiple threads in a process, we will slowly |
| * leak user memory. (Note that as soon as the last |
| * thread in a process dies, we will reclaim all user |
| * memory including single-step buffers in the usual way.) |
| * We should either assign a kernel VA to this buffer |
| * somehow, or we should associate the buffer(s) with the |
| * mm itself so we can clean them up that way. |
| */ |
| kfree(step_state); |
| } |
| } |
| |
| static void save_arch_state(struct thread_struct *t); |
| |
| int copy_thread(unsigned long clone_flags, unsigned long sp, |
| unsigned long arg, struct task_struct *p) |
| { |
| struct pt_regs *childregs = task_pt_regs(p); |
| unsigned long ksp; |
| unsigned long *callee_regs; |
| |
| /* |
| * Set up the stack and stack pointer appropriately for the |
| * new child to find itself woken up in __switch_to(). |
| * The callee-saved registers must be on the stack to be read; |
| * the new task will then jump to assembly support to handle |
| * calling schedule_tail(), etc., and (for userspace tasks) |
| * returning to the context set up in the pt_regs. |
| */ |
| ksp = (unsigned long) childregs; |
| ksp -= C_ABI_SAVE_AREA_SIZE; /* interrupt-entry save area */ |
| ((long *)ksp)[0] = ((long *)ksp)[1] = 0; |
| ksp -= CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long); |
| callee_regs = (unsigned long *)ksp; |
| ksp -= C_ABI_SAVE_AREA_SIZE; /* __switch_to() save area */ |
| ((long *)ksp)[0] = ((long *)ksp)[1] = 0; |
| p->thread.ksp = ksp; |
| |
| /* Record the pid of the task that created this one. */ |
| p->thread.creator_pid = current->pid; |
| |
| if (unlikely(p->flags & PF_KTHREAD)) { |
| /* kernel thread */ |
| memset(childregs, 0, sizeof(struct pt_regs)); |
| memset(&callee_regs[2], 0, |
| (CALLEE_SAVED_REGS_COUNT - 2) * sizeof(unsigned long)); |
| callee_regs[0] = sp; /* r30 = function */ |
| callee_regs[1] = arg; /* r31 = arg */ |
| p->thread.pc = (unsigned long) ret_from_kernel_thread; |
| return 0; |
| } |
| |
| /* |
| * Start new thread in ret_from_fork so it schedules properly |
| * and then return from interrupt like the parent. |
| */ |
| p->thread.pc = (unsigned long) ret_from_fork; |
| |
| /* |
| * Do not clone step state from the parent; each thread |
| * must make its own lazily. |
| */ |
| task_thread_info(p)->step_state = NULL; |
| |
| #ifdef __tilegx__ |
| /* |
| * Do not clone unalign jit fixup from the parent; each thread |
| * must allocate its own on demand. |
| */ |
| task_thread_info(p)->unalign_jit_base = NULL; |
| #endif |
| |
| /* |
| * Copy the registers onto the kernel stack so the |
| * return-from-interrupt code will reload it into registers. |
| */ |
| *childregs = *current_pt_regs(); |
| childregs->regs[0] = 0; /* return value is zero */ |
| if (sp) |
| childregs->sp = sp; /* override with new user stack pointer */ |
| memcpy(callee_regs, &childregs->regs[CALLEE_SAVED_FIRST_REG], |
| CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long)); |
| |
| /* Save user stack top pointer so we can ID the stack vm area later. */ |
| p->thread.usp0 = childregs->sp; |
| |
| /* |
| * If CLONE_SETTLS is set, set "tp" in the new task to "r4", |
| * which is passed in as arg #5 to sys_clone(). |
| */ |
| if (clone_flags & CLONE_SETTLS) |
| childregs->tp = childregs->regs[4]; |
| |
| |
| #if CHIP_HAS_TILE_DMA() |
| /* |
| * No DMA in the new thread. We model this on the fact that |
| * fork() clears the pending signals, alarms, and aio for the child. |
| */ |
| memset(&p->thread.tile_dma_state, 0, sizeof(struct tile_dma_state)); |
| memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb)); |
| #endif |
| |
| /* New thread has its miscellaneous processor state bits clear. */ |
| p->thread.proc_status = 0; |
| |
| #ifdef CONFIG_HARDWALL |
| /* New thread does not own any networks. */ |
| memset(&p->thread.hardwall[0], 0, |
| sizeof(struct hardwall_task) * HARDWALL_TYPES); |
| #endif |
| |
| |
| /* |
| * Start the new thread with the current architecture state |
| * (user interrupt masks, etc.). |
| */ |
| save_arch_state(&p->thread); |
| |
| return 0; |
| } |
| |
| int set_unalign_ctl(struct task_struct *tsk, unsigned int val) |
| { |
| task_thread_info(tsk)->align_ctl = val; |
| return 0; |
| } |
| |
| int get_unalign_ctl(struct task_struct *tsk, unsigned long adr) |
| { |
| return put_user(task_thread_info(tsk)->align_ctl, |
| (unsigned int __user *)adr); |
| } |
| |
| static struct task_struct corrupt_current = { .comm = "<corrupt>" }; |
| |
| /* |
| * Return "current" if it looks plausible, or else a pointer to a dummy. |
| * This can be helpful if we are just trying to emit a clean panic. |
| */ |
| struct task_struct *validate_current(void) |
| { |
| struct task_struct *tsk = current; |
| if (unlikely((unsigned long)tsk < PAGE_OFFSET || |
| (high_memory && (void *)tsk > high_memory) || |
| ((unsigned long)tsk & (__alignof__(*tsk) - 1)) != 0)) { |
| pr_err("Corrupt 'current' %p (sp %#lx)\n", tsk, stack_pointer); |
| tsk = &corrupt_current; |
| } |
| return tsk; |
| } |
| |
| /* Take and return the pointer to the previous task, for schedule_tail(). */ |
| struct task_struct *sim_notify_fork(struct task_struct *prev) |
| { |
| struct task_struct *tsk = current; |
| __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK_PARENT | |
| (tsk->thread.creator_pid << _SIM_CONTROL_OPERATOR_BITS)); |
| __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK | |
| (tsk->pid << _SIM_CONTROL_OPERATOR_BITS)); |
| return prev; |
| } |
| |
| int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) |
| { |
| struct pt_regs *ptregs = task_pt_regs(tsk); |
| elf_core_copy_regs(regs, ptregs); |
| return 1; |
| } |
| |
| #if CHIP_HAS_TILE_DMA() |
| |
| /* Allow user processes to access the DMA SPRs */ |
| void grant_dma_mpls(void) |
| { |
| #if CONFIG_KERNEL_PL == 2 |
| __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1); |
| __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1); |
| #else |
| __insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1); |
| __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1); |
| #endif |
| } |
| |
| /* Forbid user processes from accessing the DMA SPRs */ |
| void restrict_dma_mpls(void) |
| { |
| #if CONFIG_KERNEL_PL == 2 |
| __insn_mtspr(SPR_MPL_DMA_CPL_SET_2, 1); |
| __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_2, 1); |
| #else |
| __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1); |
| __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1); |
| #endif |
| } |
| |
| /* Pause the DMA engine, then save off its state registers. */ |
| static void save_tile_dma_state(struct tile_dma_state *dma) |
| { |
| unsigned long state = __insn_mfspr(SPR_DMA_USER_STATUS); |
| unsigned long post_suspend_state; |
| |
| /* If we're running, suspend the engine. */ |
| if ((state & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) |
| __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK); |
| |
| /* |
| * Wait for the engine to idle, then save regs. Note that we |
| * want to record the "running" bit from before suspension, |
| * and the "done" bit from after, so that we can properly |
| * distinguish a case where the user suspended the engine from |
| * the case where the kernel suspended as part of the context |
| * swap. |
| */ |
| do { |
| post_suspend_state = __insn_mfspr(SPR_DMA_USER_STATUS); |
| } while (post_suspend_state & SPR_DMA_STATUS__BUSY_MASK); |
| |
| dma->src = __insn_mfspr(SPR_DMA_SRC_ADDR); |
| dma->src_chunk = __insn_mfspr(SPR_DMA_SRC_CHUNK_ADDR); |
| dma->dest = __insn_mfspr(SPR_DMA_DST_ADDR); |
| dma->dest_chunk = __insn_mfspr(SPR_DMA_DST_CHUNK_ADDR); |
| dma->strides = __insn_mfspr(SPR_DMA_STRIDE); |
| dma->chunk_size = __insn_mfspr(SPR_DMA_CHUNK_SIZE); |
| dma->byte = __insn_mfspr(SPR_DMA_BYTE); |
| dma->status = (state & SPR_DMA_STATUS__RUNNING_MASK) | |
| (post_suspend_state & SPR_DMA_STATUS__DONE_MASK); |
| } |
| |
| /* Restart a DMA that was running before we were context-switched out. */ |
| static void restore_tile_dma_state(struct thread_struct *t) |
| { |
| const struct tile_dma_state *dma = &t->tile_dma_state; |
| |
| /* |
| * The only way to restore the done bit is to run a zero |
| * length transaction. |
| */ |
| if ((dma->status & SPR_DMA_STATUS__DONE_MASK) && |
| !(__insn_mfspr(SPR_DMA_USER_STATUS) & SPR_DMA_STATUS__DONE_MASK)) { |
| __insn_mtspr(SPR_DMA_BYTE, 0); |
| __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); |
| while (__insn_mfspr(SPR_DMA_USER_STATUS) & |
| SPR_DMA_STATUS__BUSY_MASK) |
| ; |
| } |
| |
| __insn_mtspr(SPR_DMA_SRC_ADDR, dma->src); |
| __insn_mtspr(SPR_DMA_SRC_CHUNK_ADDR, dma->src_chunk); |
| __insn_mtspr(SPR_DMA_DST_ADDR, dma->dest); |
| __insn_mtspr(SPR_DMA_DST_CHUNK_ADDR, dma->dest_chunk); |
| __insn_mtspr(SPR_DMA_STRIDE, dma->strides); |
| __insn_mtspr(SPR_DMA_CHUNK_SIZE, dma->chunk_size); |
| __insn_mtspr(SPR_DMA_BYTE, dma->byte); |
| |
| /* |
| * Restart the engine if we were running and not done. |
| * Clear a pending async DMA fault that we were waiting on return |
| * to user space to execute, since we expect the DMA engine |
| * to regenerate those faults for us now. Note that we don't |
| * try to clear the TIF_ASYNC_TLB flag, since it's relatively |
| * harmless if set, and it covers both DMA and the SN processor. |
| */ |
| if ((dma->status & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) { |
| t->dma_async_tlb.fault_num = 0; |
| __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK); |
| } |
| } |
| |
| #endif |
| |
| static void save_arch_state(struct thread_struct *t) |
| { |
| #if CHIP_HAS_SPLIT_INTR_MASK() |
| t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0_0) | |
| ((u64)__insn_mfspr(SPR_INTERRUPT_MASK_0_1) << 32); |
| #else |
| t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0); |
| #endif |
| t->ex_context[0] = __insn_mfspr(SPR_EX_CONTEXT_0_0); |
| t->ex_context[1] = __insn_mfspr(SPR_EX_CONTEXT_0_1); |
| t->system_save[0] = __insn_mfspr(SPR_SYSTEM_SAVE_0_0); |
| t->system_save[1] = __insn_mfspr(SPR_SYSTEM_SAVE_0_1); |
| t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2); |
| t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3); |
| t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS); |
| t->proc_status = __insn_mfspr(SPR_PROC_STATUS); |
| #if !CHIP_HAS_FIXED_INTVEC_BASE() |
| t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0); |
| #endif |
| t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM); |
| #if CHIP_HAS_DSTREAM_PF() |
| t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF); |
| #endif |
| } |
| |
| static void restore_arch_state(const struct thread_struct *t) |
| { |
| #if CHIP_HAS_SPLIT_INTR_MASK() |
| __insn_mtspr(SPR_INTERRUPT_MASK_0_0, (u32) t->interrupt_mask); |
| __insn_mtspr(SPR_INTERRUPT_MASK_0_1, t->interrupt_mask >> 32); |
| #else |
| __insn_mtspr(SPR_INTERRUPT_MASK_0, t->interrupt_mask); |
| #endif |
| __insn_mtspr(SPR_EX_CONTEXT_0_0, t->ex_context[0]); |
| __insn_mtspr(SPR_EX_CONTEXT_0_1, t->ex_context[1]); |
| __insn_mtspr(SPR_SYSTEM_SAVE_0_0, t->system_save[0]); |
| __insn_mtspr(SPR_SYSTEM_SAVE_0_1, t->system_save[1]); |
| __insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]); |
| __insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]); |
| __insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0); |
| __insn_mtspr(SPR_PROC_STATUS, t->proc_status); |
| #if !CHIP_HAS_FIXED_INTVEC_BASE() |
| __insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base); |
| #endif |
| __insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm); |
| #if CHIP_HAS_DSTREAM_PF() |
| __insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf); |
| #endif |
| } |
| |
| |
| void _prepare_arch_switch(struct task_struct *next) |
| { |
| #if CHIP_HAS_TILE_DMA() |
| struct tile_dma_state *dma = ¤t->thread.tile_dma_state; |
| if (dma->enabled) |
| save_tile_dma_state(dma); |
| #endif |
| } |
| |
| |
| struct task_struct *__sched _switch_to(struct task_struct *prev, |
| struct task_struct *next) |
| { |
| /* DMA state is already saved; save off other arch state. */ |
| save_arch_state(&prev->thread); |
| |
| #if CHIP_HAS_TILE_DMA() |
| /* |
| * Restore DMA in new task if desired. |
| * Note that it is only safe to restart here since interrupts |
| * are disabled, so we can't take any DMATLB miss or access |
| * interrupts before we have finished switching stacks. |
| */ |
| if (next->thread.tile_dma_state.enabled) { |
| restore_tile_dma_state(&next->thread); |
| grant_dma_mpls(); |
| } else { |
| restrict_dma_mpls(); |
| } |
| #endif |
| |
| /* Restore other arch state. */ |
| restore_arch_state(&next->thread); |
| |
| #ifdef CONFIG_HARDWALL |
| /* Enable or disable access to the network registers appropriately. */ |
| hardwall_switch_tasks(prev, next); |
| #endif |
| |
| /* Notify the simulator of task exit. */ |
| if (unlikely(prev->state == TASK_DEAD)) |
| __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_EXIT | |
| (prev->pid << _SIM_CONTROL_OPERATOR_BITS)); |
| |
| /* |
| * Switch kernel SP, PC, and callee-saved registers. |
| * In the context of the new task, return the old task pointer |
| * (i.e. the task that actually called __switch_to). |
| * Pass the value to use for SYSTEM_SAVE_K_0 when we reset our sp. |
| */ |
| return __switch_to(prev, next, next_current_ksp0(next)); |
| } |
| |
| /* |
| * This routine is called on return from interrupt if any of the |
| * TIF_ALLWORK_MASK flags are set in thread_info->flags. It is |
| * entered with interrupts disabled so we don't miss an event that |
| * modified the thread_info flags. We loop until all the tested flags |
| * are clear. Note that the function is called on certain conditions |
| * that are not listed in the loop condition here (e.g. SINGLESTEP) |
| * which guarantees we will do those things once, and redo them if any |
| * of the other work items is re-done, but won't continue looping if |
| * all the other work is done. |
| */ |
| void prepare_exit_to_usermode(struct pt_regs *regs, u32 thread_info_flags) |
| { |
| if (WARN_ON(!user_mode(regs))) |
| return; |
| |
| do { |
| local_irq_enable(); |
| |
| if (thread_info_flags & _TIF_NEED_RESCHED) |
| schedule(); |
| |
| #if CHIP_HAS_TILE_DMA() |
| if (thread_info_flags & _TIF_ASYNC_TLB) |
| do_async_page_fault(regs); |
| #endif |
| |
| if (thread_info_flags & _TIF_SIGPENDING) |
| do_signal(regs); |
| |
| if (thread_info_flags & _TIF_NOTIFY_RESUME) { |
| clear_thread_flag(TIF_NOTIFY_RESUME); |
| tracehook_notify_resume(regs); |
| } |
| |
| local_irq_disable(); |
| thread_info_flags = READ_ONCE(current_thread_info()->flags); |
| |
| } while (thread_info_flags & _TIF_WORK_MASK); |
| |
| if (thread_info_flags & _TIF_SINGLESTEP) { |
| single_step_once(regs); |
| #ifndef __tilegx__ |
| /* |
| * FIXME: on tilepro, since we enable interrupts in |
| * this routine, it's possible that we miss a signal |
| * or other asynchronous event. |
| */ |
| local_irq_disable(); |
| #endif |
| } |
| |
| user_enter(); |
| } |
| |
| unsigned long get_wchan(struct task_struct *p) |
| { |
| struct KBacktraceIterator kbt; |
| |
| if (!p || p == current || p->state == TASK_RUNNING) |
| return 0; |
| |
| for (KBacktraceIterator_init(&kbt, p, NULL); |
| !KBacktraceIterator_end(&kbt); |
| KBacktraceIterator_next(&kbt)) { |
| if (!in_sched_functions(kbt.it.pc)) |
| return kbt.it.pc; |
| } |
| |
| return 0; |
| } |
| |
| /* Flush thread state. */ |
| void flush_thread(void) |
| { |
| /* Nothing */ |
| } |
| |
| /* |
| * Free current thread data structures etc.. |
| */ |
| void exit_thread(struct task_struct *tsk) |
| { |
| #ifdef CONFIG_HARDWALL |
| /* |
| * Remove the task from the list of tasks that are associated |
| * with any live hardwalls. (If the task that is exiting held |
| * the last reference to a hardwall fd, it would already have |
| * been released and deactivated at this point.) |
| */ |
| hardwall_deactivate_all(tsk); |
| #endif |
| } |
| |
| void tile_show_regs(struct pt_regs *regs) |
| { |
| int i; |
| #ifdef __tilegx__ |
| for (i = 0; i < 17; i++) |
| pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT" r%-2d: "REGFMT"\n", |
| i, regs->regs[i], i+18, regs->regs[i+18], |
| i+36, regs->regs[i+36]); |
| pr_err(" r17: "REGFMT" r35: "REGFMT" tp : "REGFMT"\n", |
| regs->regs[17], regs->regs[35], regs->tp); |
| pr_err(" sp : "REGFMT" lr : "REGFMT"\n", regs->sp, regs->lr); |
| #else |
| for (i = 0; i < 13; i++) |
| pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT |
| " r%-2d: "REGFMT" r%-2d: "REGFMT"\n", |
| i, regs->regs[i], i+14, regs->regs[i+14], |
| i+27, regs->regs[i+27], i+40, regs->regs[i+40]); |
| pr_err(" r13: "REGFMT" tp : "REGFMT" sp : "REGFMT" lr : "REGFMT"\n", |
| regs->regs[13], regs->tp, regs->sp, regs->lr); |
| #endif |
| pr_err(" pc : "REGFMT" ex1: %ld faultnum: %ld flags:%s%s%s%s\n", |
| regs->pc, regs->ex1, regs->faultnum, |
| is_compat_task() ? " compat" : "", |
| (regs->flags & PT_FLAGS_DISABLE_IRQ) ? " noirq" : "", |
| !(regs->flags & PT_FLAGS_CALLER_SAVES) ? " nocallersave" : "", |
| (regs->flags & PT_FLAGS_RESTORE_REGS) ? " restoreregs" : ""); |
| } |
| |
| void show_regs(struct pt_regs *regs) |
| { |
| struct KBacktraceIterator kbt; |
| |
| show_regs_print_info(KERN_DEFAULT); |
| tile_show_regs(regs); |
| |
| KBacktraceIterator_init(&kbt, NULL, regs); |
| tile_show_stack(&kbt); |
| } |
| |
| /* To ensure stack dump on tiles occurs one by one. */ |
| static DEFINE_SPINLOCK(backtrace_lock); |
| /* To ensure no backtrace occurs before all of the stack dump are done. */ |
| static atomic_t backtrace_cpus; |
| /* The cpu mask to avoid reentrance. */ |
| static struct cpumask backtrace_mask; |
| |
| void do_nmi_dump_stack(struct pt_regs *regs) |
| { |
| int is_idle = is_idle_task(current) && !in_interrupt(); |
| int cpu; |
| |
| nmi_enter(); |
| cpu = smp_processor_id(); |
| if (WARN_ON_ONCE(!cpumask_test_and_clear_cpu(cpu, &backtrace_mask))) |
| goto done; |
| |
| spin_lock(&backtrace_lock); |
| if (is_idle) |
| pr_info("CPU: %d idle\n", cpu); |
| else |
| show_regs(regs); |
| spin_unlock(&backtrace_lock); |
| atomic_dec(&backtrace_cpus); |
| done: |
| nmi_exit(); |
| } |
| |
| #ifdef __tilegx__ |
| void arch_trigger_all_cpu_backtrace(bool self) |
| { |
| struct cpumask mask; |
| HV_Coord tile; |
| unsigned int timeout; |
| int cpu; |
| int ongoing; |
| HV_NMI_Info info[NR_CPUS]; |
| |
| ongoing = atomic_cmpxchg(&backtrace_cpus, 0, num_online_cpus() - 1); |
| if (ongoing != 0) { |
| pr_err("Trying to do all-cpu backtrace.\n"); |
| pr_err("But another all-cpu backtrace is ongoing (%d cpus left)\n", |
| ongoing); |
| if (self) { |
| pr_err("Reporting the stack on this cpu only.\n"); |
| dump_stack(); |
| } |
| return; |
| } |
| |
| cpumask_copy(&mask, cpu_online_mask); |
| cpumask_clear_cpu(smp_processor_id(), &mask); |
| cpumask_copy(&backtrace_mask, &mask); |
| |
| /* Backtrace for myself first. */ |
| if (self) |
| dump_stack(); |
| |
| /* Tentatively dump stack on remote tiles via NMI. */ |
| timeout = 100; |
| while (!cpumask_empty(&mask) && timeout) { |
| for_each_cpu(cpu, &mask) { |
| tile.x = cpu_x(cpu); |
| tile.y = cpu_y(cpu); |
| info[cpu] = hv_send_nmi(tile, TILE_NMI_DUMP_STACK, 0); |
| if (info[cpu].result == HV_NMI_RESULT_OK) |
| cpumask_clear_cpu(cpu, &mask); |
| } |
| |
| mdelay(10); |
| timeout--; |
| } |
| |
| /* Warn about cpus stuck in ICS and decrement their counts here. */ |
| if (!cpumask_empty(&mask)) { |
| for_each_cpu(cpu, &mask) { |
| switch (info[cpu].result) { |
| case HV_NMI_RESULT_FAIL_ICS: |
| pr_warn("Skipping stack dump of cpu %d in ICS at pc %#llx\n", |
| cpu, info[cpu].pc); |
| break; |
| case HV_NMI_RESULT_FAIL_HV: |
| pr_warn("Skipping stack dump of cpu %d in hypervisor\n", |
| cpu); |
| break; |
| case HV_ENOSYS: |
| pr_warn("Hypervisor too old to allow remote stack dumps.\n"); |
| goto skip_for_each; |
| default: /* should not happen */ |
| pr_warn("Skipping stack dump of cpu %d [%d,%#llx]\n", |
| cpu, info[cpu].result, info[cpu].pc); |
| break; |
| } |
| } |
| skip_for_each: |
| atomic_sub(cpumask_weight(&mask), &backtrace_cpus); |
| } |
| } |
| #endif /* __tilegx_ */ |