drivers/net/ethernet/intel/e1000e/param.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /* Intel PRO/1000 Linux driver
  * Copyright(c) 1999 - 2014 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * The full GNU General Public License is included in this distribution in
  * the file called "COPYING".
  *
  * Contact Information:
  * Linux NICS <linux.nics@intel.com>
  * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  */

 #include <linux/netdevice.h>
 #include <linux/module.h>
 #include <linux/pci.h>

 #include "e1000.h"

 /* This is the only thing that needs to be changed to adjust the
  * maximum number of ports that the driver can manage.
  */
 #define E1000_MAX_NIC 32

 #define OPTION_UNSET   -1
 #define OPTION_DISABLED 0
 #define OPTION_ENABLED  1

 #define COPYBREAK_DEFAULT 256
 unsigned int copybreak = COPYBREAK_DEFAULT;
 module_param(copybreak, uint, 0644);
 MODULE_PARM_DESC(copybreak,
 		 "Maximum size of packet that is copied to a new buffer on receive");

 /* All parameters are treated the same, as an integer array of values.
  * This macro just reduces the need to repeat the same declaration code
  * over and over (plus this helps to avoid typo bugs).
  */
 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
 #define E1000_PARAM(X, desc)					\
 	static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT;	\
 	static unsigned int num_##X;				\
 	module_param_array_named(X, X, int, &num_##X, 0);	\
 	MODULE_PARM_DESC(X, desc);

 /* Transmit Interrupt Delay in units of 1.024 microseconds
  * Tx interrupt delay needs to typically be set to something non-zero
  *
  * Valid Range: 0-65535
  */
 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
 #define DEFAULT_TIDV 8
 #define MAX_TXDELAY 0xFFFF
 #define MIN_TXDELAY 0

 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
  *
  * Valid Range: 0-65535
  */
 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
 #define DEFAULT_TADV 32
 #define MAX_TXABSDELAY 0xFFFF
 #define MIN_TXABSDELAY 0

 /* Receive Interrupt Delay in units of 1.024 microseconds
  * hardware will likely hang if you set this to anything but zero.
  *
  * Valid Range: 0-65535
  */
 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
 #define MAX_RXDELAY 0xFFFF
 #define MIN_RXDELAY 0

 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds
  *
  * Valid Range: 0-65535
  */
 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
 #define MAX_RXABSDELAY 0xFFFF
 #define MIN_RXABSDELAY 0

 /* Interrupt Throttle Rate (interrupts/sec)
  *
  * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
  */
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
 #define DEFAULT_ITR 3
 #define MAX_ITR 100000
 #define MIN_ITR 100

 /* IntMode (Interrupt Mode)
  *
  * Valid Range: varies depending on kernel configuration & hardware support
  *
  * legacy=0, MSI=1, MSI-X=2
  *
  * When MSI/MSI-X support is enabled in kernel-
  *   Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
  * When MSI/MSI-X support is not enabled in kernel-
  *   Default Value: 0 (legacy)
  *
  * When a mode is specified that is not allowed/supported, it will be
  * demoted to the most advanced interrupt mode available.
  */
 E1000_PARAM(IntMode, "Interrupt Mode");
 #define MAX_INTMODE	2
 #define MIN_INTMODE	0

 /* Enable Smart Power Down of the PHY
  *
  * Valid Range: 0, 1
  *
  * Default Value: 0 (disabled)
  */
 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");

 /* Enable Kumeran Lock Loss workaround
  *
  * Valid Range: 0, 1
  *
  * Default Value: 1 (enabled)
  */
 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");

 /* Write Protect NVM
  *
  * Valid Range: 0, 1
  *
  * Default Value: 1 (enabled)
  */
 E1000_PARAM(WriteProtectNVM,
 	    "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");

 /* Enable CRC Stripping
  *
  * Valid Range: 0, 1
  *
  * Default Value: 1 (enabled)
  */
 E1000_PARAM(CrcStripping,
 	    "Enable CRC Stripping, disable if your BMC needs the CRC");

 struct e1000_option {
 	enum { enable_option, range_option, list_option } type;
 	const char *name;
 	const char *err;
 	int def;
 	union {
 		/* range_option info */
 		struct {
 			int min;
 			int max;
 		} r;
 		/* list_option info */
 		struct {
 			int nr;
 			struct e1000_opt_list {
 				int i;
 				char *str;
 			} *p;
 		} l;
 	} arg;
 };

 static int e1000_validate_option(unsigned int *value,
 				 const struct e1000_option *opt,
 				 struct e1000_adapter *adapter)
 {
 	if (*value == OPTION_UNSET) {
 		*value = opt->def;
 		return 0;
 	}

 	switch (opt->type) {
 	case enable_option:
 		switch (*value) {
 		case OPTION_ENABLED:
 			dev_info(&adapter->pdev->dev, "%s Enabled\n",
 				 opt->name);
 			return 0;
 		case OPTION_DISABLED:
 			dev_info(&adapter->pdev->dev, "%s Disabled\n",
 				 opt->name);
 			return 0;
 		}
 		break;
 	case range_option:
 		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
 			dev_info(&adapter->pdev->dev, "%s set to %i\n",
 				 opt->name, *value);
 			return 0;
 		}
 		break;
 	case list_option: {
 		int i;
 		struct e1000_opt_list *ent;

 		for (i = 0; i < opt->arg.l.nr; i++) {
 			ent = &opt->arg.l.p[i];
 			if (*value == ent->i) {
 				if (ent->str[0] != '\0')
 					dev_info(&adapter->pdev->dev, "%s\n",
 						 ent->str);
 				return 0;
 			}
 		}
 	}
 		break;
 	default:
 		BUG();
 	}

 	dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
 		 opt->name, *value, opt->err);
 	*value = opt->def;
 	return -1;
 }

 /**
  * e1000e_check_options - Range Checking for Command Line Parameters
  * @adapter: board private structure
  *
  * This routine checks all command line parameters for valid user
  * input.  If an invalid value is given, or if no user specified
  * value exists, a default value is used.  The final value is stored
  * in a variable in the adapter structure.
  **/
 void e1000e_check_options(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	int bd = adapter->bd_number;

 	if (bd >= E1000_MAX_NIC) {
 		dev_notice(&adapter->pdev->dev,
 			   "Warning: no configuration for board #%i\n", bd);
 		dev_notice(&adapter->pdev->dev,
 			   "Using defaults for all values\n");
 	}

 	/* Transmit Interrupt Delay */
 	{
 		static const struct e1000_option opt = {
 			.type = range_option,
 			.name = "Transmit Interrupt Delay",
 			.err  = "using default of "
 				__MODULE_STRING(DEFAULT_TIDV),
 			.def  = DEFAULT_TIDV,
 			.arg  = { .r = { .min = MIN_TXDELAY,
 					 .max = MAX_TXDELAY } }
 		};

 		if (num_TxIntDelay > bd) {
 			adapter->tx_int_delay = TxIntDelay[bd];
 			e1000_validate_option(&adapter->tx_int_delay, &opt,
 					      adapter);
 		} else {
 			adapter->tx_int_delay = opt.def;
 		}
 	}
 	/* Transmit Absolute Interrupt Delay */
 	{
 		static const struct e1000_option opt = {
 			.type = range_option,
 			.name = "Transmit Absolute Interrupt Delay",
 			.err  = "using default of "
 				__MODULE_STRING(DEFAULT_TADV),
 			.def  = DEFAULT_TADV,
 			.arg  = { .r = { .min = MIN_TXABSDELAY,
 					 .max = MAX_TXABSDELAY } }
 		};

 		if (num_TxAbsIntDelay > bd) {
 			adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
 			e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
 					      adapter);
 		} else {
 			adapter->tx_abs_int_delay = opt.def;
 		}
 	}
 	/* Receive Interrupt Delay */
 	{
 		static struct e1000_option opt = {
 			.type = range_option,
 			.name = "Receive Interrupt Delay",
 			.err  = "using default of "
 				__MODULE_STRING(DEFAULT_RDTR),
 			.def  = DEFAULT_RDTR,
 			.arg  = { .r = { .min = MIN_RXDELAY,
 					 .max = MAX_RXDELAY } }
 		};

 		if (num_RxIntDelay > bd) {
 			adapter->rx_int_delay = RxIntDelay[bd];
 			e1000_validate_option(&adapter->rx_int_delay, &opt,
 					      adapter);
 		} else {
 			adapter->rx_int_delay = opt.def;
 		}
 	}
 	/* Receive Absolute Interrupt Delay */
 	{
 		static const struct e1000_option opt = {
 			.type = range_option,
 			.name = "Receive Absolute Interrupt Delay",
 			.err  = "using default of "
 				__MODULE_STRING(DEFAULT_RADV),
 			.def  = DEFAULT_RADV,
 			.arg  = { .r = { .min = MIN_RXABSDELAY,
 					 .max = MAX_RXABSDELAY } }
 		};

 		if (num_RxAbsIntDelay > bd) {
 			adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
 			e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
 					      adapter);
 		} else {
 			adapter->rx_abs_int_delay = opt.def;
 		}
 	}
 	/* Interrupt Throttling Rate */
 	{
 		static const struct e1000_option opt = {
 			.type = range_option,
 			.name = "Interrupt Throttling Rate (ints/sec)",
 			.err  = "using default of "
 				__MODULE_STRING(DEFAULT_ITR),
 			.def  = DEFAULT_ITR,
 			.arg  = { .r = { .min = MIN_ITR,
 					 .max = MAX_ITR } }
 		};

 		if (num_InterruptThrottleRate > bd) {
 			adapter->itr = InterruptThrottleRate[bd];

 			/* Make sure a message is printed for non-special
 			 * values. And in case of an invalid option, display
 			 * warning, use default and go through itr/itr_setting
 			 * adjustment logic below
 			 */
 			if ((adapter->itr > 4) &&
 			    e1000_validate_option(&adapter->itr, &opt, adapter))
 				adapter->itr = opt.def;
 		} else {
 			/* If no option specified, use default value and go
 			 * through the logic below to adjust itr/itr_setting
 			 */
 			adapter->itr = opt.def;

 			/* Make sure a message is printed for non-special
 			 * default values
 			 */
 			if (adapter->itr > 4)
 				dev_info(&adapter->pdev->dev,
 					 "%s set to default %d\n", opt.name,
 					 adapter->itr);
 		}

 		adapter->itr_setting = adapter->itr;
 		switch (adapter->itr) {
 		case 0:
 			dev_info(&adapter->pdev->dev, "%s turned off\n",
 				 opt.name);
 			break;
 		case 1:
 			dev_info(&adapter->pdev->dev,
 				 "%s set to dynamic mode\n", opt.name);
 			adapter->itr = 20000;
 			break;
 		case 2:
 			dev_info(&adapter->pdev->dev,
 				 "%s Invalid mode - setting default\n",
 				 opt.name);
 			adapter->itr_setting = opt.def;
 			/* fall-through */
 		case 3:
 			dev_info(&adapter->pdev->dev,
 				 "%s set to dynamic conservative mode\n",
 				 opt.name);
 			adapter->itr = 20000;
 			break;
 		case 4:
 			dev_info(&adapter->pdev->dev,
 				 "%s set to simplified (2000-8000 ints) mode\n",
 				 opt.name);
 			break;
 		default:
 			/* Save the setting, because the dynamic bits
 			 * change itr.
 			 *
 			 * Clear the lower two bits because
 			 * they are used as control.
 			 */
 			adapter->itr_setting &= ~3;
 			break;
 		}
 	}
 	/* Interrupt Mode */
 	{
 		static struct e1000_option opt = {
 			.type = range_option,
 			.name = "Interrupt Mode",
 #ifndef CONFIG_PCI_MSI
 			.err  = "defaulting to 0 (legacy)",
 			.def  = E1000E_INT_MODE_LEGACY,
 			.arg  = { .r = { .min = 0,
 					 .max = 0 } }
 #endif
 		};

 #ifdef CONFIG_PCI_MSI
 		if (adapter->flags & FLAG_HAS_MSIX) {
 			opt.err = kstrdup("defaulting to 2 (MSI-X)",
 					  GFP_KERNEL);
 			opt.def = E1000E_INT_MODE_MSIX;
 			opt.arg.r.max = E1000E_INT_MODE_MSIX;
 		} else {
 			opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
 			opt.def = E1000E_INT_MODE_MSI;
 			opt.arg.r.max = E1000E_INT_MODE_MSI;
 		}

 		if (!opt.err) {
 			dev_err(&adapter->pdev->dev,
 				"Failed to allocate memory\n");
 			return;
 		}
 #endif

 		if (num_IntMode > bd) {
 			unsigned int int_mode = IntMode[bd];
 			e1000_validate_option(&int_mode, &opt, adapter);
 			adapter->int_mode = int_mode;
 		} else {
 			adapter->int_mode = opt.def;
 		}

 #ifdef CONFIG_PCI_MSI
 		kfree(opt.err);
 #endif
 	}
 	/* Smart Power Down */
 	{
 		static const struct e1000_option opt = {
 			.type = enable_option,
 			.name = "PHY Smart Power Down",
 			.err  = "defaulting to Disabled",
 			.def  = OPTION_DISABLED
 		};

 		if (num_SmartPowerDownEnable > bd) {
 			unsigned int spd = SmartPowerDownEnable[bd];
 			e1000_validate_option(&spd, &opt, adapter);
 			if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd)
 				adapter->flags |= FLAG_SMART_POWER_DOWN;
 		}
 	}
 	/* CRC Stripping */
 	{
 		static const struct e1000_option opt = {
 			.type = enable_option,
 			.name = "CRC Stripping",
 			.err  = "defaulting to Enabled",
 			.def  = OPTION_ENABLED
 		};

 		if (num_CrcStripping > bd) {
 			unsigned int crc_stripping = CrcStripping[bd];
 			e1000_validate_option(&crc_stripping, &opt, adapter);
 			if (crc_stripping == OPTION_ENABLED) {
 				adapter->flags2 |= FLAG2_CRC_STRIPPING;
 				adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
 			}
 		} else {
 			adapter->flags2 |= FLAG2_CRC_STRIPPING;
 			adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
 		}
 	}
 	/* Kumeran Lock Loss Workaround */
 	{
 		static const struct e1000_option opt = {
 			.type = enable_option,
 			.name = "Kumeran Lock Loss Workaround",
 			.err  = "defaulting to Enabled",
 			.def  = OPTION_ENABLED
 		};
 		bool enabled = opt.def;

 		if (num_KumeranLockLoss > bd) {
 			unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
 			e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
 			enabled = kmrn_lock_loss;
 		}

 		if (hw->mac.type == e1000_ich8lan)
 			e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
 								     enabled);
 	}
 	/* Write-protect NVM */
 	{
 		static const struct e1000_option opt = {
 			.type = enable_option,
 			.name = "Write-protect NVM",
 			.err  = "defaulting to Enabled",
 			.def  = OPTION_ENABLED
 		};

 		if (adapter->flags & FLAG_IS_ICH) {
 			if (num_WriteProtectNVM > bd) {
 				unsigned int write_protect_nvm =
 				    WriteProtectNVM[bd];
 				e1000_validate_option(&write_protect_nvm, &opt,
 						      adapter);
 				if (write_protect_nvm)
 					adapter->flags |= FLAG_READ_ONLY_NVM;
 			} else {
 				if (opt.def)
 					adapter->flags |= FLAG_READ_ONLY_NVM;
 			}
 		}
 	}
 }
	/* Intel PRO/1000 Linux driver
	* Copyright(c) 1999 - 2014 Intel Corporation.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* The full GNU General Public License is included in this distribution in
	* the file called "COPYING".
	*
	* Contact Information:
	* Linux NICS <linux.nics@intel.com>
	* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
	* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
	*/

	#include <linux/netdevice.h>
	#include <linux/module.h>
	#include <linux/pci.h>

	#include "e1000.h"

	/* This is the only thing that needs to be changed to adjust the
	* maximum number of ports that the driver can manage.
	*/
	#define E1000_MAX_NIC 32

	#define OPTION_UNSET -1
	#define OPTION_DISABLED 0
	#define OPTION_ENABLED 1

	#define COPYBREAK_DEFAULT 256
	unsigned int copybreak = COPYBREAK_DEFAULT;
	module_param(copybreak, uint, 0644);
	MODULE_PARM_DESC(copybreak,
	"Maximum size of packet that is copied to a new buffer on receive");

	/* All parameters are treated the same, as an integer array of values.
	* This macro just reduces the need to repeat the same declaration code
	* over and over (plus this helps to avoid typo bugs).
	*/
	#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
	#define E1000_PARAM(X, desc) \
	static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
	static unsigned int num_##X; \
	module_param_array_named(X, X, int, &num_##X, 0); \
	MODULE_PARM_DESC(X, desc);

	/* Transmit Interrupt Delay in units of 1.024 microseconds
	* Tx interrupt delay needs to typically be set to something non-zero
	*
	* Valid Range: 0-65535
	*/
	E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
	#define DEFAULT_TIDV 8
	#define MAX_TXDELAY 0xFFFF
	#define MIN_TXDELAY 0

	/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
	*
	* Valid Range: 0-65535
	*/
	E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
	#define DEFAULT_TADV 32
	#define MAX_TXABSDELAY 0xFFFF
	#define MIN_TXABSDELAY 0

	/* Receive Interrupt Delay in units of 1.024 microseconds
	* hardware will likely hang if you set this to anything but zero.
	*
	* Valid Range: 0-65535
	*/
	E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
	#define MAX_RXDELAY 0xFFFF
	#define MIN_RXDELAY 0

	/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
	*
	* Valid Range: 0-65535
	*/
	E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
	#define MAX_RXABSDELAY 0xFFFF
	#define MIN_RXABSDELAY 0

	/* Interrupt Throttle Rate (interrupts/sec)
	*
	* Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
	*/
	E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
	#define DEFAULT_ITR 3
	#define MAX_ITR 100000
	#define MIN_ITR 100

	/* IntMode (Interrupt Mode)
	*
	* Valid Range: varies depending on kernel configuration & hardware support
	*
	* legacy=0, MSI=1, MSI-X=2
	*
	* When MSI/MSI-X support is enabled in kernel-
	* Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
	* When MSI/MSI-X support is not enabled in kernel-
	* Default Value: 0 (legacy)
	*
	* When a mode is specified that is not allowed/supported, it will be
	* demoted to the most advanced interrupt mode available.
	*/
	E1000_PARAM(IntMode, "Interrupt Mode");
	#define MAX_INTMODE 2
	#define MIN_INTMODE 0

	/* Enable Smart Power Down of the PHY
	*
	* Valid Range: 0, 1
	*
	* Default Value: 0 (disabled)
	*/
	E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");

	/* Enable Kumeran Lock Loss workaround
	*
	* Valid Range: 0, 1
	*
	* Default Value: 1 (enabled)
	*/
	E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");

	/* Write Protect NVM
	*
	* Valid Range: 0, 1
	*
	* Default Value: 1 (enabled)
	*/
	E1000_PARAM(WriteProtectNVM,
	"Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");

	/* Enable CRC Stripping
	*
	* Valid Range: 0, 1
	*
	* Default Value: 1 (enabled)
	*/
	E1000_PARAM(CrcStripping,
	"Enable CRC Stripping, disable if your BMC needs the CRC");

	struct e1000_option {
	enum { enable_option, range_option, list_option } type;
	const char *name;
	const char *err;
	int def;
	union {
	/* range_option info */
	struct {
	int min;
	int max;
	} r;
	/* list_option info */
	struct {
	int nr;
	struct e1000_opt_list {
	int i;
	char *str;
	} *p;
	} l;
	} arg;
	};

	static int e1000_validate_option(unsigned int *value,
	const struct e1000_option *opt,
	struct e1000_adapter *adapter)
	{
	if (*value == OPTION_UNSET) {
	*value = opt->def;
	return 0;
	}

	switch (opt->type) {
	case enable_option:
	switch (*value) {
	case OPTION_ENABLED:
	dev_info(&adapter->pdev->dev, "%s Enabled\n",
	opt->name);
	return 0;
	case OPTION_DISABLED:
	dev_info(&adapter->pdev->dev, "%s Disabled\n",
	opt->name);
	return 0;
	}
	break;
	case range_option:
	if (value >= opt->arg.r.min && value <= opt->arg.r.max) {
	dev_info(&adapter->pdev->dev, "%s set to %i\n",
	opt->name, *value);
	return 0;
	}
	break;
	case list_option: {
	int i;
	struct e1000_opt_list *ent;

	for (i = 0; i < opt->arg.l.nr; i++) {
	ent = &opt->arg.l.p[i];
	if (*value == ent->i) {
	if (ent->str[0] != '\0')
	dev_info(&adapter->pdev->dev, "%s\n",
	ent->str);
	return 0;
	}
	}
	}
	break;
	default:
	BUG();
	}

	dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
	opt->name, *value, opt->err);
	*value = opt->def;
	return -1;
	}

	/**
	* e1000e_check_options - Range Checking for Command Line Parameters
	* @adapter: board private structure
	*
	* This routine checks all command line parameters for valid user
	* input. If an invalid value is given, or if no user specified
	* value exists, a default value is used. The final value is stored
	* in a variable in the adapter structure.
	**/
	void e1000e_check_options(struct e1000_adapter *adapter)
	{
	struct e1000_hw *hw = &adapter->hw;
	int bd = adapter->bd_number;

	if (bd >= E1000_MAX_NIC) {
	dev_notice(&adapter->pdev->dev,
	"Warning: no configuration for board #%i\n", bd);
	dev_notice(&adapter->pdev->dev,
	"Using defaults for all values\n");
	}

	/* Transmit Interrupt Delay */
	{
	static const struct e1000_option opt = {
	.type = range_option,
	.name = "Transmit Interrupt Delay",
	.err = "using default of "
	__MODULE_STRING(DEFAULT_TIDV),
	.def = DEFAULT_TIDV,
	.arg = { .r = { .min = MIN_TXDELAY,
	.max = MAX_TXDELAY } }
	};

	if (num_TxIntDelay > bd) {
	adapter->tx_int_delay = TxIntDelay[bd];
	e1000_validate_option(&adapter->tx_int_delay, &opt,
	adapter);
	} else {
	adapter->tx_int_delay = opt.def;
	}
	}
	/* Transmit Absolute Interrupt Delay */
	{
	static const struct e1000_option opt = {
	.type = range_option,
	.name = "Transmit Absolute Interrupt Delay",
	.err = "using default of "
	__MODULE_STRING(DEFAULT_TADV),
	.def = DEFAULT_TADV,
	.arg = { .r = { .min = MIN_TXABSDELAY,
	.max = MAX_TXABSDELAY } }
	};

	if (num_TxAbsIntDelay > bd) {
	adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
	e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
	adapter);
	} else {
	adapter->tx_abs_int_delay = opt.def;
	}
	}
	/* Receive Interrupt Delay */
	{
	static struct e1000_option opt = {
	.type = range_option,
	.name = "Receive Interrupt Delay",
	.err = "using default of "
	__MODULE_STRING(DEFAULT_RDTR),
	.def = DEFAULT_RDTR,
	.arg = { .r = { .min = MIN_RXDELAY,
	.max = MAX_RXDELAY } }
	};

	if (num_RxIntDelay > bd) {
	adapter->rx_int_delay = RxIntDelay[bd];
	e1000_validate_option(&adapter->rx_int_delay, &opt,
	adapter);
	} else {
	adapter->rx_int_delay = opt.def;
	}
	}
	/* Receive Absolute Interrupt Delay */
	{
	static const struct e1000_option opt = {
	.type = range_option,
	.name = "Receive Absolute Interrupt Delay",
	.err = "using default of "
	__MODULE_STRING(DEFAULT_RADV),
	.def = DEFAULT_RADV,
	.arg = { .r = { .min = MIN_RXABSDELAY,
	.max = MAX_RXABSDELAY } }
	};

	if (num_RxAbsIntDelay > bd) {
	adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
	e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
	adapter);
	} else {
	adapter->rx_abs_int_delay = opt.def;
	}
	}
	/* Interrupt Throttling Rate */
	{
	static const struct e1000_option opt = {
	.type = range_option,
	.name = "Interrupt Throttling Rate (ints/sec)",
	.err = "using default of "
	__MODULE_STRING(DEFAULT_ITR),
	.def = DEFAULT_ITR,
	.arg = { .r = { .min = MIN_ITR,
	.max = MAX_ITR } }
	};

	if (num_InterruptThrottleRate > bd) {
	adapter->itr = InterruptThrottleRate[bd];

	/* Make sure a message is printed for non-special
	* values. And in case of an invalid option, display
	* warning, use default and go through itr/itr_setting
	* adjustment logic below
	*/
	if ((adapter->itr > 4) &&
	e1000_validate_option(&adapter->itr, &opt, adapter))
	adapter->itr = opt.def;
	} else {
	/* If no option specified, use default value and go
	* through the logic below to adjust itr/itr_setting
	*/
	adapter->itr = opt.def;

	/* Make sure a message is printed for non-special
	* default values
	*/
	if (adapter->itr > 4)
	dev_info(&adapter->pdev->dev,
	"%s set to default %d\n", opt.name,
	adapter->itr);
	}

	adapter->itr_setting = adapter->itr;
	switch (adapter->itr) {
	case 0:
	dev_info(&adapter->pdev->dev, "%s turned off\n",
	opt.name);
	break;
	case 1:
	dev_info(&adapter->pdev->dev,
	"%s set to dynamic mode\n", opt.name);
	adapter->itr = 20000;
	break;
	case 2:
	dev_info(&adapter->pdev->dev,
	"%s Invalid mode - setting default\n",
	opt.name);
	adapter->itr_setting = opt.def;
	/* fall-through */
	case 3:
	dev_info(&adapter->pdev->dev,
	"%s set to dynamic conservative mode\n",
	opt.name);
	adapter->itr = 20000;
	break;
	case 4:
	dev_info(&adapter->pdev->dev,
	"%s set to simplified (2000-8000 ints) mode\n",
	opt.name);
	break;
	default:
	/* Save the setting, because the dynamic bits
	* change itr.
	*
	* Clear the lower two bits because
	* they are used as control.
	*/
	adapter->itr_setting &= ~3;
	break;
	}
	}
	/* Interrupt Mode */
	{
	static struct e1000_option opt = {
	.type = range_option,
	.name = "Interrupt Mode",
	#ifndef CONFIG_PCI_MSI
	.err = "defaulting to 0 (legacy)",
	.def = E1000E_INT_MODE_LEGACY,
	.arg = { .r = { .min = 0,
	.max = 0 } }
	#endif
	};

	#ifdef CONFIG_PCI_MSI
	if (adapter->flags & FLAG_HAS_MSIX) {
	opt.err = kstrdup("defaulting to 2 (MSI-X)",
	GFP_KERNEL);
	opt.def = E1000E_INT_MODE_MSIX;
	opt.arg.r.max = E1000E_INT_MODE_MSIX;
	} else {
	opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
	opt.def = E1000E_INT_MODE_MSI;
	opt.arg.r.max = E1000E_INT_MODE_MSI;
	}

	if (!opt.err) {
	dev_err(&adapter->pdev->dev,
	"Failed to allocate memory\n");
	return;
	}
	#endif

	if (num_IntMode > bd) {
	unsigned int int_mode = IntMode[bd];
	e1000_validate_option(&int_mode, &opt, adapter);
	adapter->int_mode = int_mode;
	} else {
	adapter->int_mode = opt.def;
	}

	#ifdef CONFIG_PCI_MSI
	kfree(opt.err);
	#endif
	}
	/* Smart Power Down */
	{
	static const struct e1000_option opt = {
	.type = enable_option,
	.name = "PHY Smart Power Down",
	.err = "defaulting to Disabled",
	.def = OPTION_DISABLED
	};

	if (num_SmartPowerDownEnable > bd) {
	unsigned int spd = SmartPowerDownEnable[bd];
	e1000_validate_option(&spd, &opt, adapter);
	if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd)
	adapter->flags \|= FLAG_SMART_POWER_DOWN;
	}
	}
	/* CRC Stripping */
	{
	static const struct e1000_option opt = {
	.type = enable_option,
	.name = "CRC Stripping",
	.err = "defaulting to Enabled",
	.def = OPTION_ENABLED
	};

	if (num_CrcStripping > bd) {
	unsigned int crc_stripping = CrcStripping[bd];
	e1000_validate_option(&crc_stripping, &opt, adapter);
	if (crc_stripping == OPTION_ENABLED) {
	adapter->flags2 \|= FLAG2_CRC_STRIPPING;
	adapter->flags2 \|= FLAG2_DFLT_CRC_STRIPPING;
	}
	} else {
	adapter->flags2 \|= FLAG2_CRC_STRIPPING;
	adapter->flags2 \|= FLAG2_DFLT_CRC_STRIPPING;
	}
	}
	/* Kumeran Lock Loss Workaround */
	{
	static const struct e1000_option opt = {
	.type = enable_option,
	.name = "Kumeran Lock Loss Workaround",
	.err = "defaulting to Enabled",
	.def = OPTION_ENABLED
	};
	bool enabled = opt.def;

	if (num_KumeranLockLoss > bd) {
	unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
	e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
	enabled = kmrn_lock_loss;
	}

	if (hw->mac.type == e1000_ich8lan)
	e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
	enabled);
	}
	/* Write-protect NVM */
	{
	static const struct e1000_option opt = {
	.type = enable_option,
	.name = "Write-protect NVM",
	.err = "defaulting to Enabled",
	.def = OPTION_ENABLED
	};

	if (adapter->flags & FLAG_IS_ICH) {
	if (num_WriteProtectNVM > bd) {
	unsigned int write_protect_nvm =
	WriteProtectNVM[bd];
	e1000_validate_option(&write_protect_nvm, &opt,
	adapter);
	if (write_protect_nvm)
	adapter->flags \|= FLAG_READ_ONLY_NVM;
	} else {
	if (opt.def)
	adapter->flags \|= FLAG_READ_ONLY_NVM;
	}
	}
	}
	}