| /* |
| * PCMCIA 16-bit resource management functions |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| * |
| * Copyright (C) 1999 David A. Hinds |
| * Copyright (C) 2004-2005 Dominik Brodowski |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/device.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| |
| #include "cs_internal.h" |
| #include "ds_internal.h" |
| |
| |
| /* Access speed for IO windows */ |
| static int io_speed = 0; |
| module_param(io_speed, int, 0444); |
| |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| #include <asm/irq.h> |
| /* mask of IRQs already reserved by other cards, we should avoid using them */ |
| static u8 pcmcia_used_irq[NR_IRQS]; |
| #endif |
| |
| |
| #ifdef DEBUG |
| extern int ds_pc_debug; |
| |
| #define ds_dbg(skt, lvl, fmt, arg...) do { \ |
| if (ds_pc_debug >= lvl) \ |
| printk(KERN_DEBUG "pcmcia_resource: %s: " fmt, \ |
| cs_socket_name(skt) , ## arg); \ |
| } while (0) |
| #else |
| #define ds_dbg(lvl, fmt, arg...) do { } while (0) |
| #endif |
| |
| |
| |
| /** alloc_io_space |
| * |
| * Special stuff for managing IO windows, because they are scarce |
| */ |
| |
| static int alloc_io_space(struct pcmcia_socket *s, u_int attr, |
| unsigned int *base, unsigned int num, u_int lines) |
| { |
| int i; |
| unsigned int try, align; |
| |
| align = (*base) ? (lines ? 1<<lines : 0) : 1; |
| if (align && (align < num)) { |
| if (*base) { |
| ds_dbg(s, 0, "odd IO request: num %#x align %#x\n", |
| num, align); |
| align = 0; |
| } else |
| while (align && (align < num)) align <<= 1; |
| } |
| if (*base & ~(align-1)) { |
| ds_dbg(s, 0, "odd IO request: base %#x align %#x\n", |
| *base, align); |
| align = 0; |
| } |
| if ((s->features & SS_CAP_STATIC_MAP) && s->io_offset) { |
| *base = s->io_offset | (*base & 0x0fff); |
| return 0; |
| } |
| /* Check for an already-allocated window that must conflict with |
| * what was asked for. It is a hack because it does not catch all |
| * potential conflicts, just the most obvious ones. |
| */ |
| for (i = 0; i < MAX_IO_WIN; i++) |
| if ((s->io[i].res) && *base && |
| ((s->io[i].res->start & (align-1)) == *base)) |
| return 1; |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) { |
| s->io[i].res = pcmcia_find_io_region(*base, num, align, s); |
| if (s->io[i].res) { |
| *base = s->io[i].res->start; |
| s->io[i].res->flags = (s->io[i].res->flags & ~IORESOURCE_BITS) | (attr & IORESOURCE_BITS); |
| s->io[i].InUse = num; |
| break; |
| } else |
| return 1; |
| } else if ((s->io[i].res->flags & IORESOURCE_BITS) != (attr & IORESOURCE_BITS)) |
| continue; |
| /* Try to extend top of window */ |
| try = s->io[i].res->end + 1; |
| if ((*base == 0) || (*base == try)) |
| if (pcmcia_adjust_io_region(s->io[i].res, s->io[i].res->start, |
| s->io[i].res->end + num, s) == 0) { |
| *base = try; |
| s->io[i].InUse += num; |
| break; |
| } |
| /* Try to extend bottom of window */ |
| try = s->io[i].res->start - num; |
| if ((*base == 0) || (*base == try)) |
| if (pcmcia_adjust_io_region(s->io[i].res, s->io[i].res->start - num, |
| s->io[i].res->end, s) == 0) { |
| *base = try; |
| s->io[i].InUse += num; |
| break; |
| } |
| } |
| return (i == MAX_IO_WIN); |
| } /* alloc_io_space */ |
| |
| |
| static void release_io_space(struct pcmcia_socket *s, unsigned int base, |
| unsigned int num) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) |
| continue; |
| if ((s->io[i].res->start <= base) && |
| (s->io[i].res->end >= base+num-1)) { |
| s->io[i].InUse -= num; |
| /* Free the window if no one else is using it */ |
| if (s->io[i].InUse == 0) { |
| release_resource(s->io[i].res); |
| kfree(s->io[i].res); |
| s->io[i].res = NULL; |
| } |
| } |
| } |
| } /* release_io_space */ |
| |
| |
| /** pccard_access_configuration_register |
| * |
| * Access_configuration_register() reads and writes configuration |
| * registers in attribute memory. Memory window 0 is reserved for |
| * this and the tuple reading services. |
| */ |
| |
| int pcmcia_access_configuration_register(struct pcmcia_device *p_dev, |
| conf_reg_t *reg) |
| { |
| struct pcmcia_socket *s; |
| config_t *c; |
| int addr; |
| u_char val; |
| |
| if (!p_dev || !p_dev->function_config) |
| return CS_NO_CARD; |
| |
| s = p_dev->socket; |
| c = p_dev->function_config; |
| |
| if (!(c->state & CONFIG_LOCKED)) |
| return CS_CONFIGURATION_LOCKED; |
| |
| addr = (c->ConfigBase + reg->Offset) >> 1; |
| |
| switch (reg->Action) { |
| case CS_READ: |
| pcmcia_read_cis_mem(s, 1, addr, 1, &val); |
| reg->Value = val; |
| break; |
| case CS_WRITE: |
| val = reg->Value; |
| pcmcia_write_cis_mem(s, 1, addr, 1, &val); |
| break; |
| default: |
| return CS_BAD_ARGS; |
| break; |
| } |
| return CS_SUCCESS; |
| } /* pcmcia_access_configuration_register */ |
| EXPORT_SYMBOL(pcmcia_access_configuration_register); |
| |
| |
| int pccard_get_configuration_info(struct pcmcia_socket *s, |
| struct pcmcia_device *p_dev, |
| config_info_t *config) |
| { |
| config_t *c; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| |
| |
| #ifdef CONFIG_CARDBUS |
| if (s->state & SOCKET_CARDBUS) { |
| memset(config, 0, sizeof(config_info_t)); |
| config->Vcc = s->socket.Vcc; |
| config->Vpp1 = config->Vpp2 = s->socket.Vpp; |
| config->Option = s->cb_dev->subordinate->number; |
| if (s->state & SOCKET_CARDBUS_CONFIG) { |
| config->Attributes = CONF_VALID_CLIENT; |
| config->IntType = INT_CARDBUS; |
| config->AssignedIRQ = s->irq.AssignedIRQ; |
| if (config->AssignedIRQ) |
| config->Attributes |= CONF_ENABLE_IRQ; |
| if (s->io[0].res) { |
| config->BasePort1 = s->io[0].res->start; |
| config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1; |
| } |
| } |
| return CS_SUCCESS; |
| } |
| #endif |
| |
| if (p_dev) { |
| c = p_dev->function_config; |
| config->Function = p_dev->func; |
| } else { |
| c = NULL; |
| config->Function = 0; |
| } |
| |
| if ((c == NULL) || !(c->state & CONFIG_LOCKED)) { |
| config->Attributes = 0; |
| config->Vcc = s->socket.Vcc; |
| config->Vpp1 = config->Vpp2 = s->socket.Vpp; |
| return CS_SUCCESS; |
| } |
| |
| config->Attributes = c->Attributes | CONF_VALID_CLIENT; |
| config->Vcc = s->socket.Vcc; |
| config->Vpp1 = config->Vpp2 = s->socket.Vpp; |
| config->IntType = c->IntType; |
| config->ConfigBase = c->ConfigBase; |
| config->Status = c->Status; |
| config->Pin = c->Pin; |
| config->Copy = c->Copy; |
| config->Option = c->Option; |
| config->ExtStatus = c->ExtStatus; |
| config->Present = config->CardValues = c->CardValues; |
| config->IRQAttributes = c->irq.Attributes; |
| config->AssignedIRQ = s->irq.AssignedIRQ; |
| config->BasePort1 = c->io.BasePort1; |
| config->NumPorts1 = c->io.NumPorts1; |
| config->Attributes1 = c->io.Attributes1; |
| config->BasePort2 = c->io.BasePort2; |
| config->NumPorts2 = c->io.NumPorts2; |
| config->Attributes2 = c->io.Attributes2; |
| config->IOAddrLines = c->io.IOAddrLines; |
| |
| return CS_SUCCESS; |
| } /* pccard_get_configuration_info */ |
| |
| int pcmcia_get_configuration_info(struct pcmcia_device *p_dev, |
| config_info_t *config) |
| { |
| return pccard_get_configuration_info(p_dev->socket, p_dev, |
| config); |
| } |
| EXPORT_SYMBOL(pcmcia_get_configuration_info); |
| |
| |
| /** pcmcia_get_window |
| */ |
| int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle, |
| int idx, win_req_t *req) |
| { |
| window_t *win; |
| int w; |
| |
| if (!s || !(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| for (w = idx; w < MAX_WIN; w++) |
| if (s->state & SOCKET_WIN_REQ(w)) |
| break; |
| if (w == MAX_WIN) |
| return CS_NO_MORE_ITEMS; |
| win = &s->win[w]; |
| req->Base = win->ctl.res->start; |
| req->Size = win->ctl.res->end - win->ctl.res->start + 1; |
| req->AccessSpeed = win->ctl.speed; |
| req->Attributes = 0; |
| if (win->ctl.flags & MAP_ATTRIB) |
| req->Attributes |= WIN_MEMORY_TYPE_AM; |
| if (win->ctl.flags & MAP_ACTIVE) |
| req->Attributes |= WIN_ENABLE; |
| if (win->ctl.flags & MAP_16BIT) |
| req->Attributes |= WIN_DATA_WIDTH_16; |
| if (win->ctl.flags & MAP_USE_WAIT) |
| req->Attributes |= WIN_USE_WAIT; |
| *handle = win; |
| return CS_SUCCESS; |
| } /* pcmcia_get_window */ |
| EXPORT_SYMBOL(pcmcia_get_window); |
| |
| |
| /** pcmcia_get_mem_page |
| * |
| * Change the card address of an already open memory window. |
| */ |
| int pcmcia_get_mem_page(window_handle_t win, memreq_t *req) |
| { |
| if ((win == NULL) || (win->magic != WINDOW_MAGIC)) |
| return CS_BAD_HANDLE; |
| req->Page = 0; |
| req->CardOffset = win->ctl.card_start; |
| return CS_SUCCESS; |
| } /* pcmcia_get_mem_page */ |
| EXPORT_SYMBOL(pcmcia_get_mem_page); |
| |
| |
| int pcmcia_map_mem_page(window_handle_t win, memreq_t *req) |
| { |
| struct pcmcia_socket *s; |
| if ((win == NULL) || (win->magic != WINDOW_MAGIC)) |
| return CS_BAD_HANDLE; |
| if (req->Page != 0) |
| return CS_BAD_PAGE; |
| s = win->sock; |
| win->ctl.card_start = req->CardOffset; |
| if (s->ops->set_mem_map(s, &win->ctl) != 0) |
| return CS_BAD_OFFSET; |
| return CS_SUCCESS; |
| } /* pcmcia_map_mem_page */ |
| EXPORT_SYMBOL(pcmcia_map_mem_page); |
| |
| |
| /** pcmcia_modify_configuration |
| * |
| * Modify a locked socket configuration |
| */ |
| int pcmcia_modify_configuration(struct pcmcia_device *p_dev, |
| modconf_t *mod) |
| { |
| struct pcmcia_socket *s; |
| config_t *c; |
| |
| s = p_dev->socket; |
| c = p_dev->function_config; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| if (!(c->state & CONFIG_LOCKED)) |
| return CS_CONFIGURATION_LOCKED; |
| |
| if (mod->Attributes & CONF_IRQ_CHANGE_VALID) { |
| if (mod->Attributes & CONF_ENABLE_IRQ) { |
| c->Attributes |= CONF_ENABLE_IRQ; |
| s->socket.io_irq = s->irq.AssignedIRQ; |
| } else { |
| c->Attributes &= ~CONF_ENABLE_IRQ; |
| s->socket.io_irq = 0; |
| } |
| s->ops->set_socket(s, &s->socket); |
| } |
| |
| if (mod->Attributes & CONF_VCC_CHANGE_VALID) |
| return CS_BAD_VCC; |
| |
| /* We only allow changing Vpp1 and Vpp2 to the same value */ |
| if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && |
| (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { |
| if (mod->Vpp1 != mod->Vpp2) |
| return CS_BAD_VPP; |
| s->socket.Vpp = mod->Vpp1; |
| if (s->ops->set_socket(s, &s->socket)) |
| return CS_BAD_VPP; |
| } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) || |
| (mod->Attributes & CONF_VPP2_CHANGE_VALID)) |
| return CS_BAD_VPP; |
| |
| if (mod->Attributes & CONF_IO_CHANGE_WIDTH) { |
| pccard_io_map io_off = { 0, 0, 0, 0, 1 }; |
| pccard_io_map io_on; |
| int i; |
| |
| io_on.speed = io_speed; |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) |
| continue; |
| io_off.map = i; |
| io_on.map = i; |
| |
| io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; |
| io_on.start = s->io[i].res->start; |
| io_on.stop = s->io[i].res->end; |
| |
| s->ops->set_io_map(s, &io_off); |
| mdelay(40); |
| s->ops->set_io_map(s, &io_on); |
| } |
| } |
| |
| return CS_SUCCESS; |
| } /* modify_configuration */ |
| EXPORT_SYMBOL(pcmcia_modify_configuration); |
| |
| |
| int pcmcia_release_configuration(struct pcmcia_device *p_dev) |
| { |
| pccard_io_map io = { 0, 0, 0, 0, 1 }; |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c = p_dev->function_config; |
| int i; |
| |
| if (p_dev->_locked) { |
| p_dev->_locked = 0; |
| if (--(s->lock_count) == 0) { |
| s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ |
| s->socket.Vpp = 0; |
| s->socket.io_irq = 0; |
| s->ops->set_socket(s, &s->socket); |
| } |
| } |
| if (c->state & CONFIG_LOCKED) { |
| c->state &= ~CONFIG_LOCKED; |
| if (c->state & CONFIG_IO_REQ) |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) |
| continue; |
| s->io[i].Config--; |
| if (s->io[i].Config != 0) |
| continue; |
| io.map = i; |
| s->ops->set_io_map(s, &io); |
| } |
| } |
| |
| return CS_SUCCESS; |
| } /* pcmcia_release_configuration */ |
| |
| |
| /** pcmcia_release_io |
| * |
| * Release_io() releases the I/O ranges allocated by a client. This |
| * may be invoked some time after a card ejection has already dumped |
| * the actual socket configuration, so if the client is "stale", we |
| * don't bother checking the port ranges against the current socket |
| * values. |
| */ |
| static int pcmcia_release_io(struct pcmcia_device *p_dev, io_req_t *req) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c = p_dev->function_config; |
| |
| if (!p_dev->_io ) |
| return CS_BAD_HANDLE; |
| |
| p_dev->_io = 0; |
| |
| if ((c->io.BasePort1 != req->BasePort1) || |
| (c->io.NumPorts1 != req->NumPorts1) || |
| (c->io.BasePort2 != req->BasePort2) || |
| (c->io.NumPorts2 != req->NumPorts2)) |
| return CS_BAD_ARGS; |
| |
| c->state &= ~CONFIG_IO_REQ; |
| |
| release_io_space(s, req->BasePort1, req->NumPorts1); |
| if (req->NumPorts2) |
| release_io_space(s, req->BasePort2, req->NumPorts2); |
| |
| return CS_SUCCESS; |
| } /* pcmcia_release_io */ |
| |
| |
| static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c= p_dev->function_config; |
| |
| if (!p_dev->_irq) |
| return CS_BAD_HANDLE; |
| p_dev->_irq = 0; |
| |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| if (c->irq.Attributes != req->Attributes) |
| return CS_BAD_ATTRIBUTE; |
| if (s->irq.AssignedIRQ != req->AssignedIRQ) |
| return CS_BAD_IRQ; |
| if (--s->irq.Config == 0) { |
| c->state &= ~CONFIG_IRQ_REQ; |
| s->irq.AssignedIRQ = 0; |
| } |
| |
| if (req->Attributes & IRQ_HANDLE_PRESENT) { |
| free_irq(req->AssignedIRQ, req->Instance); |
| } |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| pcmcia_used_irq[req->AssignedIRQ]--; |
| #endif |
| |
| return CS_SUCCESS; |
| } /* pcmcia_release_irq */ |
| |
| |
| int pcmcia_release_window(window_handle_t win) |
| { |
| struct pcmcia_socket *s; |
| |
| if ((win == NULL) || (win->magic != WINDOW_MAGIC)) |
| return CS_BAD_HANDLE; |
| s = win->sock; |
| if (!(win->handle->_win & CLIENT_WIN_REQ(win->index))) |
| return CS_BAD_HANDLE; |
| |
| /* Shut down memory window */ |
| win->ctl.flags &= ~MAP_ACTIVE; |
| s->ops->set_mem_map(s, &win->ctl); |
| s->state &= ~SOCKET_WIN_REQ(win->index); |
| |
| /* Release system memory */ |
| if (win->ctl.res) { |
| release_resource(win->ctl.res); |
| kfree(win->ctl.res); |
| win->ctl.res = NULL; |
| } |
| win->handle->_win &= ~CLIENT_WIN_REQ(win->index); |
| |
| win->magic = 0; |
| |
| return CS_SUCCESS; |
| } /* pcmcia_release_window */ |
| EXPORT_SYMBOL(pcmcia_release_window); |
| |
| |
| int pcmcia_request_configuration(struct pcmcia_device *p_dev, |
| config_req_t *req) |
| { |
| int i; |
| u_int base; |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c; |
| pccard_io_map iomap; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| |
| if (req->IntType & INT_CARDBUS) |
| return CS_UNSUPPORTED_MODE; |
| c = p_dev->function_config; |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| |
| /* Do power control. We don't allow changes in Vcc. */ |
| s->socket.Vpp = req->Vpp; |
| if (s->ops->set_socket(s, &s->socket)) |
| return CS_BAD_VPP; |
| |
| /* Pick memory or I/O card, DMA mode, interrupt */ |
| c->IntType = req->IntType; |
| c->Attributes = req->Attributes; |
| if (req->IntType & INT_MEMORY_AND_IO) |
| s->socket.flags |= SS_IOCARD; |
| if (req->IntType & INT_ZOOMED_VIDEO) |
| s->socket.flags |= SS_ZVCARD | SS_IOCARD; |
| if (req->Attributes & CONF_ENABLE_DMA) |
| s->socket.flags |= SS_DMA_MODE; |
| if (req->Attributes & CONF_ENABLE_SPKR) |
| s->socket.flags |= SS_SPKR_ENA; |
| if (req->Attributes & CONF_ENABLE_IRQ) |
| s->socket.io_irq = s->irq.AssignedIRQ; |
| else |
| s->socket.io_irq = 0; |
| s->ops->set_socket(s, &s->socket); |
| s->lock_count++; |
| |
| /* Set up CIS configuration registers */ |
| base = c->ConfigBase = req->ConfigBase; |
| c->CardValues = req->Present; |
| if (req->Present & PRESENT_COPY) { |
| c->Copy = req->Copy; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &c->Copy); |
| } |
| if (req->Present & PRESENT_OPTION) { |
| if (s->functions == 1) { |
| c->Option = req->ConfigIndex & COR_CONFIG_MASK; |
| } else { |
| c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK; |
| c->Option |= COR_FUNC_ENA|COR_IREQ_ENA; |
| if (req->Present & PRESENT_IOBASE_0) |
| c->Option |= COR_ADDR_DECODE; |
| } |
| if (c->state & CONFIG_IRQ_REQ) |
| if (!(c->irq.Attributes & IRQ_FORCED_PULSE)) |
| c->Option |= COR_LEVEL_REQ; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option); |
| mdelay(40); |
| } |
| if (req->Present & PRESENT_STATUS) { |
| c->Status = req->Status; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status); |
| } |
| if (req->Present & PRESENT_PIN_REPLACE) { |
| c->Pin = req->Pin; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &c->Pin); |
| } |
| if (req->Present & PRESENT_EXT_STATUS) { |
| c->ExtStatus = req->ExtStatus; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus); |
| } |
| if (req->Present & PRESENT_IOBASE_0) { |
| u_char b = c->io.BasePort1 & 0xff; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b); |
| b = (c->io.BasePort1 >> 8) & 0xff; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b); |
| } |
| if (req->Present & PRESENT_IOSIZE) { |
| u_char b = c->io.NumPorts1 + c->io.NumPorts2 - 1; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b); |
| } |
| |
| /* Configure I/O windows */ |
| if (c->state & CONFIG_IO_REQ) { |
| iomap.speed = io_speed; |
| for (i = 0; i < MAX_IO_WIN; i++) |
| if (s->io[i].res) { |
| iomap.map = i; |
| iomap.flags = MAP_ACTIVE; |
| switch (s->io[i].res->flags & IO_DATA_PATH_WIDTH) { |
| case IO_DATA_PATH_WIDTH_16: |
| iomap.flags |= MAP_16BIT; break; |
| case IO_DATA_PATH_WIDTH_AUTO: |
| iomap.flags |= MAP_AUTOSZ; break; |
| default: |
| break; |
| } |
| iomap.start = s->io[i].res->start; |
| iomap.stop = s->io[i].res->end; |
| s->ops->set_io_map(s, &iomap); |
| s->io[i].Config++; |
| } |
| } |
| |
| c->state |= CONFIG_LOCKED; |
| p_dev->_locked = 1; |
| return CS_SUCCESS; |
| } /* pcmcia_request_configuration */ |
| EXPORT_SYMBOL(pcmcia_request_configuration); |
| |
| |
| /** pcmcia_request_io |
| * |
| * Request_io() reserves ranges of port addresses for a socket. |
| * I have not implemented range sharing or alias addressing. |
| */ |
| int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| |
| if (!req) |
| return CS_UNSUPPORTED_MODE; |
| c = p_dev->function_config; |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| if (c->state & CONFIG_IO_REQ) |
| return CS_IN_USE; |
| if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) |
| return CS_BAD_ATTRIBUTE; |
| if ((req->NumPorts2 > 0) && |
| (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) |
| return CS_BAD_ATTRIBUTE; |
| |
| if (alloc_io_space(s, req->Attributes1, &req->BasePort1, |
| req->NumPorts1, req->IOAddrLines)) |
| return CS_IN_USE; |
| |
| if (req->NumPorts2) { |
| if (alloc_io_space(s, req->Attributes2, &req->BasePort2, |
| req->NumPorts2, req->IOAddrLines)) { |
| release_io_space(s, req->BasePort1, req->NumPorts1); |
| return CS_IN_USE; |
| } |
| } |
| |
| c->io = *req; |
| c->state |= CONFIG_IO_REQ; |
| p_dev->_io = 1; |
| return CS_SUCCESS; |
| } /* pcmcia_request_io */ |
| EXPORT_SYMBOL(pcmcia_request_io); |
| |
| |
| /** pcmcia_request_irq |
| * |
| * Request_irq() reserves an irq for this client. |
| * |
| * Also, since Linux only reserves irq's when they are actually |
| * hooked, we don't guarantee that an irq will still be available |
| * when the configuration is locked. Now that I think about it, |
| * there might be a way to fix this using a dummy handler. |
| */ |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| static irqreturn_t test_action(int cpl, void *dev_id) |
| { |
| return IRQ_NONE; |
| } |
| #endif |
| |
| int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c; |
| int ret = CS_IN_USE, irq = 0; |
| int type; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| c = p_dev->function_config; |
| if (c->state & CONFIG_LOCKED) |
| return CS_CONFIGURATION_LOCKED; |
| if (c->state & CONFIG_IRQ_REQ) |
| return CS_IN_USE; |
| |
| /* Decide what type of interrupt we are registering */ |
| type = 0; |
| if (s->functions > 1) /* All of this ought to be handled higher up */ |
| type = IRQF_SHARED; |
| if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING) |
| type = IRQF_SHARED; |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| |
| #ifdef IRQ_NOAUTOEN |
| /* if the underlying IRQ infrastructure allows for it, only allocate |
| * the IRQ, but do not enable it |
| */ |
| if (!(req->Attributes & IRQ_HANDLE_PRESENT)) |
| type |= IRQ_NOAUTOEN; |
| #endif /* IRQ_NOAUTOEN */ |
| |
| if (s->irq.AssignedIRQ != 0) { |
| /* If the interrupt is already assigned, it must be the same */ |
| irq = s->irq.AssignedIRQ; |
| } else { |
| int try; |
| u32 mask = s->irq_mask; |
| void *data = &p_dev->dev.driver; /* something unique to this device */ |
| |
| for (try = 0; try < 64; try++) { |
| irq = try % 32; |
| |
| /* marked as available by driver, and not blocked by userspace? */ |
| if (!((mask >> irq) & 1)) |
| continue; |
| |
| /* avoid an IRQ which is already used by a PCMCIA card */ |
| if ((try < 32) && pcmcia_used_irq[irq]) |
| continue; |
| |
| /* register the correct driver, if possible, of check whether |
| * registering a dummy handle works, i.e. if the IRQ isn't |
| * marked as used by the kernel resource management core */ |
| ret = request_irq(irq, |
| (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Handler : test_action, |
| type, |
| p_dev->devname, |
| (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Instance : data); |
| if (!ret) { |
| if (!(req->Attributes & IRQ_HANDLE_PRESENT)) |
| free_irq(irq, data); |
| break; |
| } |
| } |
| } |
| #endif |
| /* only assign PCI irq if no IRQ already assigned */ |
| if (ret && !s->irq.AssignedIRQ) { |
| if (!s->pci_irq) |
| return ret; |
| type = IRQF_SHARED; |
| irq = s->pci_irq; |
| } |
| |
| if (ret && (req->Attributes & IRQ_HANDLE_PRESENT)) { |
| if (request_irq(irq, req->Handler, type, p_dev->devname, req->Instance)) |
| return CS_IN_USE; |
| } |
| |
| /* Make sure the fact the request type was overridden is passed back */ |
| if (type == IRQF_SHARED && !(req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)) { |
| req->Attributes |= IRQ_TYPE_DYNAMIC_SHARING; |
| printk(KERN_WARNING "pcmcia: request for exclusive IRQ could not be fulfilled.\n"); |
| printk(KERN_WARNING "pcmcia: the driver needs updating to supported shared IRQ lines.\n"); |
| } |
| c->irq.Attributes = req->Attributes; |
| s->irq.AssignedIRQ = req->AssignedIRQ = irq; |
| s->irq.Config++; |
| |
| c->state |= CONFIG_IRQ_REQ; |
| p_dev->_irq = 1; |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| pcmcia_used_irq[irq]++; |
| #endif |
| |
| return CS_SUCCESS; |
| } /* pcmcia_request_irq */ |
| EXPORT_SYMBOL(pcmcia_request_irq); |
| |
| |
| /** pcmcia_request_window |
| * |
| * Request_window() establishes a mapping between card memory space |
| * and system memory space. |
| */ |
| int pcmcia_request_window(struct pcmcia_device **p_dev, win_req_t *req, window_handle_t *wh) |
| { |
| struct pcmcia_socket *s = (*p_dev)->socket; |
| window_t *win; |
| u_long align; |
| int w; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return CS_NO_CARD; |
| if (req->Attributes & (WIN_PAGED | WIN_SHARED)) |
| return CS_BAD_ATTRIBUTE; |
| |
| /* Window size defaults to smallest available */ |
| if (req->Size == 0) |
| req->Size = s->map_size; |
| align = (((s->features & SS_CAP_MEM_ALIGN) || |
| (req->Attributes & WIN_STRICT_ALIGN)) ? |
| req->Size : s->map_size); |
| if (req->Size & (s->map_size-1)) |
| return CS_BAD_SIZE; |
| if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) || |
| (req->Base & (align-1))) |
| return CS_BAD_BASE; |
| if (req->Base) |
| align = 0; |
| |
| /* Allocate system memory window */ |
| for (w = 0; w < MAX_WIN; w++) |
| if (!(s->state & SOCKET_WIN_REQ(w))) break; |
| if (w == MAX_WIN) |
| return CS_OUT_OF_RESOURCE; |
| |
| win = &s->win[w]; |
| win->magic = WINDOW_MAGIC; |
| win->index = w; |
| win->handle = *p_dev; |
| win->sock = s; |
| |
| if (!(s->features & SS_CAP_STATIC_MAP)) { |
| win->ctl.res = pcmcia_find_mem_region(req->Base, req->Size, align, |
| (req->Attributes & WIN_MAP_BELOW_1MB), s); |
| if (!win->ctl.res) |
| return CS_IN_USE; |
| } |
| (*p_dev)->_win |= CLIENT_WIN_REQ(w); |
| |
| /* Configure the socket controller */ |
| win->ctl.map = w+1; |
| win->ctl.flags = 0; |
| win->ctl.speed = req->AccessSpeed; |
| if (req->Attributes & WIN_MEMORY_TYPE) |
| win->ctl.flags |= MAP_ATTRIB; |
| if (req->Attributes & WIN_ENABLE) |
| win->ctl.flags |= MAP_ACTIVE; |
| if (req->Attributes & WIN_DATA_WIDTH_16) |
| win->ctl.flags |= MAP_16BIT; |
| if (req->Attributes & WIN_USE_WAIT) |
| win->ctl.flags |= MAP_USE_WAIT; |
| win->ctl.card_start = 0; |
| if (s->ops->set_mem_map(s, &win->ctl) != 0) |
| return CS_BAD_ARGS; |
| s->state |= SOCKET_WIN_REQ(w); |
| |
| /* Return window handle */ |
| if (s->features & SS_CAP_STATIC_MAP) { |
| req->Base = win->ctl.static_start; |
| } else { |
| req->Base = win->ctl.res->start; |
| } |
| *wh = win; |
| |
| return CS_SUCCESS; |
| } /* pcmcia_request_window */ |
| EXPORT_SYMBOL(pcmcia_request_window); |
| |
| void pcmcia_disable_device(struct pcmcia_device *p_dev) { |
| pcmcia_release_configuration(p_dev); |
| pcmcia_release_io(p_dev, &p_dev->io); |
| pcmcia_release_irq(p_dev, &p_dev->irq); |
| if (p_dev->win) |
| pcmcia_release_window(p_dev->win); |
| } |
| EXPORT_SYMBOL(pcmcia_disable_device); |
| |
| |
| struct pcmcia_cfg_mem { |
| tuple_t tuple; |
| cisparse_t parse; |
| u8 buf[256]; |
| }; |
| |
| /** |
| * pcmcia_loop_config() - loop over configuration options |
| * @p_dev: the struct pcmcia_device which we need to loop for. |
| * @conf_check: function to call for each configuration option. |
| * It gets passed the struct pcmcia_device, the CIS data |
| * describing the configuration option, and private data |
| * being passed to pcmcia_loop_config() |
| * @priv_data: private data to be passed to the conf_check function. |
| * |
| * pcmcia_loop_config() loops over all configuration options, and calls |
| * the driver-specific conf_check() for each one, checking whether |
| * it is a valid one. |
| */ |
| int pcmcia_loop_config(struct pcmcia_device *p_dev, |
| int (*conf_check) (struct pcmcia_device *p_dev, |
| cistpl_cftable_entry_t *cfg, |
| void *priv_data), |
| void *priv_data) |
| { |
| struct pcmcia_cfg_mem *cfg_mem; |
| tuple_t *tuple; |
| int ret = -ENODEV; |
| |
| cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL); |
| if (cfg_mem == NULL) |
| return -ENOMEM; |
| |
| tuple = &cfg_mem->tuple; |
| tuple->TupleData = cfg_mem->buf; |
| tuple->TupleDataMax = 255; |
| tuple->TupleOffset = 0; |
| tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; |
| tuple->Attributes = 0; |
| |
| ret = pcmcia_get_first_tuple(p_dev, tuple); |
| while (!ret) { |
| cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry; |
| |
| if (pcmcia_get_tuple_data(p_dev, tuple)) |
| goto next_entry; |
| |
| if (pcmcia_parse_tuple(p_dev, tuple, &cfg_mem->parse)) |
| goto next_entry; |
| |
| /* default values */ |
| p_dev->conf.ConfigIndex = cfg->index; |
| |
| ret = conf_check(p_dev, cfg, priv_data); |
| if (!ret) |
| break; |
| |
| next_entry: |
| ret = pcmcia_get_next_tuple(p_dev, tuple); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pcmcia_loop_config); |