| /* |
| * DBAu1000/1500/1100 PBAu1100/1500 board support |
| * |
| * Copyright 2000, 2008 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. <source@mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/leds.h> |
| #include <linux/mmc/host.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/spi_gpio.h> |
| #include <linux/spi/ads7846.h> |
| #include <asm/mach-au1x00/au1000.h> |
| #include <asm/mach-au1x00/au1000_dma.h> |
| #include <asm/mach-au1x00/au1100_mmc.h> |
| #include <asm/mach-db1x00/bcsr.h> |
| #include <asm/reboot.h> |
| #include <prom.h> |
| #include "platform.h" |
| |
| #define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) |
| |
| struct pci_dev; |
| |
| static const char *board_type_str(void) |
| { |
| switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) { |
| case BCSR_WHOAMI_DB1000: |
| return "DB1000"; |
| case BCSR_WHOAMI_DB1500: |
| return "DB1500"; |
| case BCSR_WHOAMI_DB1100: |
| return "DB1100"; |
| case BCSR_WHOAMI_PB1500: |
| case BCSR_WHOAMI_PB1500R2: |
| return "PB1500"; |
| case BCSR_WHOAMI_PB1100: |
| return "PB1100"; |
| default: |
| return "(unknown)"; |
| } |
| } |
| |
| const char *get_system_type(void) |
| { |
| return board_type_str(); |
| } |
| |
| void __init board_setup(void) |
| { |
| /* initialize board register space */ |
| bcsr_init(DB1000_BCSR_PHYS_ADDR, |
| DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); |
| |
| printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str()); |
| } |
| |
| |
| static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin) |
| { |
| if ((slot < 12) || (slot > 13) || pin == 0) |
| return -1; |
| if (slot == 12) |
| return (pin == 1) ? AU1500_PCI_INTA : 0xff; |
| if (slot == 13) { |
| switch (pin) { |
| case 1: return AU1500_PCI_INTA; |
| case 2: return AU1500_PCI_INTB; |
| case 3: return AU1500_PCI_INTC; |
| case 4: return AU1500_PCI_INTD; |
| } |
| } |
| return -1; |
| } |
| |
| static struct resource alchemy_pci_host_res[] = { |
| [0] = { |
| .start = AU1500_PCI_PHYS_ADDR, |
| .end = AU1500_PCI_PHYS_ADDR + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct alchemy_pci_platdata db1500_pci_pd = { |
| .board_map_irq = db1500_map_pci_irq, |
| }; |
| |
| static struct platform_device db1500_pci_host_dev = { |
| .dev.platform_data = &db1500_pci_pd, |
| .name = "alchemy-pci", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(alchemy_pci_host_res), |
| .resource = alchemy_pci_host_res, |
| }; |
| |
| static int __init db1500_pci_init(void) |
| { |
| int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); |
| if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) || |
| (id == BCSR_WHOAMI_PB1500R2)) |
| return platform_device_register(&db1500_pci_host_dev); |
| return 0; |
| } |
| /* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */ |
| arch_initcall(db1500_pci_init); |
| |
| |
| static struct resource au1100_lcd_resources[] = { |
| [0] = { |
| .start = AU1100_LCD_PHYS_ADDR, |
| .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AU1100_LCD_INT, |
| .end = AU1100_LCD_INT, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device au1100_lcd_device = { |
| .name = "au1100-lcd", |
| .id = 0, |
| .dev = { |
| .dma_mask = &au1100_lcd_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .num_resources = ARRAY_SIZE(au1100_lcd_resources), |
| .resource = au1100_lcd_resources, |
| }; |
| |
| static struct resource alchemy_ac97c_res[] = { |
| [0] = { |
| .start = AU1000_AC97_PHYS_ADDR, |
| .end = AU1000_AC97_PHYS_ADDR + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = DMA_ID_AC97C_TX, |
| .end = DMA_ID_AC97C_TX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .start = DMA_ID_AC97C_RX, |
| .end = DMA_ID_AC97C_RX, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct platform_device alchemy_ac97c_dev = { |
| .name = "alchemy-ac97c", |
| .id = -1, |
| .resource = alchemy_ac97c_res, |
| .num_resources = ARRAY_SIZE(alchemy_ac97c_res), |
| }; |
| |
| static struct platform_device alchemy_ac97c_dma_dev = { |
| .name = "alchemy-pcm-dma", |
| .id = 0, |
| }; |
| |
| static struct platform_device db1x00_codec_dev = { |
| .name = "ac97-codec", |
| .id = -1, |
| }; |
| |
| static struct platform_device db1x00_audio_dev = { |
| .name = "db1000-audio", |
| }; |
| |
| /******************************************************************************/ |
| |
| static irqreturn_t db1100_mmc_cd(int irq, void *ptr) |
| { |
| void (*mmc_cd)(struct mmc_host *, unsigned long); |
| /* link against CONFIG_MMC=m */ |
| mmc_cd = symbol_get(mmc_detect_change); |
| mmc_cd(ptr, msecs_to_jiffies(500)); |
| symbol_put(mmc_detect_change); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int db1100_mmc_cd_setup(void *mmc_host, int en) |
| { |
| int ret = 0, irq; |
| |
| if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100) |
| irq = AU1100_GPIO19_INT; |
| else |
| irq = AU1100_GPIO14_INT; /* PB1100 SD0 CD# */ |
| |
| if (en) { |
| irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH); |
| ret = request_irq(irq, db1100_mmc_cd, 0, |
| "sd0_cd", mmc_host); |
| } else |
| free_irq(irq, mmc_host); |
| return ret; |
| } |
| |
| static int db1100_mmc1_cd_setup(void *mmc_host, int en) |
| { |
| int ret = 0, irq; |
| |
| if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100) |
| irq = AU1100_GPIO20_INT; |
| else |
| irq = AU1100_GPIO15_INT; /* PB1100 SD1 CD# */ |
| |
| if (en) { |
| irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH); |
| ret = request_irq(irq, db1100_mmc_cd, 0, |
| "sd1_cd", mmc_host); |
| } else |
| free_irq(irq, mmc_host); |
| return ret; |
| } |
| |
| static int db1100_mmc_card_readonly(void *mmc_host) |
| { |
| /* testing suggests that this bit is inverted */ |
| return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1; |
| } |
| |
| static int db1100_mmc_card_inserted(void *mmc_host) |
| { |
| return !alchemy_gpio_get_value(19); |
| } |
| |
| static void db1100_mmc_set_power(void *mmc_host, int state) |
| { |
| int bit; |
| |
| if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100) |
| bit = BCSR_BOARD_SD0PWR; |
| else |
| bit = BCSR_BOARD_PB1100_SD0PWR; |
| |
| if (state) { |
| bcsr_mod(BCSR_BOARD, 0, bit); |
| msleep(400); /* stabilization time */ |
| } else |
| bcsr_mod(BCSR_BOARD, bit, 0); |
| } |
| |
| static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b) |
| { |
| if (b != LED_OFF) |
| bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); |
| else |
| bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); |
| } |
| |
| static struct led_classdev db1100_mmc_led = { |
| .brightness_set = db1100_mmcled_set, |
| }; |
| |
| static int db1100_mmc1_card_readonly(void *mmc_host) |
| { |
| return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0; |
| } |
| |
| static int db1100_mmc1_card_inserted(void *mmc_host) |
| { |
| return !alchemy_gpio_get_value(20); |
| } |
| |
| static void db1100_mmc1_set_power(void *mmc_host, int state) |
| { |
| int bit; |
| |
| if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100) |
| bit = BCSR_BOARD_SD1PWR; |
| else |
| bit = BCSR_BOARD_PB1100_SD1PWR; |
| |
| if (state) { |
| bcsr_mod(BCSR_BOARD, 0, bit); |
| msleep(400); /* stabilization time */ |
| } else |
| bcsr_mod(BCSR_BOARD, bit, 0); |
| } |
| |
| static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b) |
| { |
| if (b != LED_OFF) |
| bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); |
| else |
| bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); |
| } |
| |
| static struct led_classdev db1100_mmc1_led = { |
| .brightness_set = db1100_mmc1led_set, |
| }; |
| |
| static struct au1xmmc_platform_data db1100_mmc_platdata[2] = { |
| [0] = { |
| .cd_setup = db1100_mmc_cd_setup, |
| .set_power = db1100_mmc_set_power, |
| .card_inserted = db1100_mmc_card_inserted, |
| .card_readonly = db1100_mmc_card_readonly, |
| .led = &db1100_mmc_led, |
| }, |
| [1] = { |
| .cd_setup = db1100_mmc1_cd_setup, |
| .set_power = db1100_mmc1_set_power, |
| .card_inserted = db1100_mmc1_card_inserted, |
| .card_readonly = db1100_mmc1_card_readonly, |
| .led = &db1100_mmc1_led, |
| }, |
| }; |
| |
| static struct resource au1100_mmc0_resources[] = { |
| [0] = { |
| .start = AU1100_SD0_PHYS_ADDR, |
| .end = AU1100_SD0_PHYS_ADDR + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AU1100_SD_INT, |
| .end = AU1100_SD_INT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = DMA_ID_SD0_TX, |
| .end = DMA_ID_SD0_TX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .start = DMA_ID_SD0_RX, |
| .end = DMA_ID_SD0_RX, |
| .flags = IORESOURCE_DMA, |
| } |
| }; |
| |
| static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device db1100_mmc0_dev = { |
| .name = "au1xxx-mmc", |
| .id = 0, |
| .dev = { |
| .dma_mask = &au1xxx_mmc_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &db1100_mmc_platdata[0], |
| }, |
| .num_resources = ARRAY_SIZE(au1100_mmc0_resources), |
| .resource = au1100_mmc0_resources, |
| }; |
| |
| static struct resource au1100_mmc1_res[] = { |
| [0] = { |
| .start = AU1100_SD1_PHYS_ADDR, |
| .end = AU1100_SD1_PHYS_ADDR + 0xfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AU1100_SD_INT, |
| .end = AU1100_SD_INT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = DMA_ID_SD1_TX, |
| .end = DMA_ID_SD1_TX, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .start = DMA_ID_SD1_RX, |
| .end = DMA_ID_SD1_RX, |
| .flags = IORESOURCE_DMA, |
| } |
| }; |
| |
| static struct platform_device db1100_mmc1_dev = { |
| .name = "au1xxx-mmc", |
| .id = 1, |
| .dev = { |
| .dma_mask = &au1xxx_mmc_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &db1100_mmc_platdata[1], |
| }, |
| .num_resources = ARRAY_SIZE(au1100_mmc1_res), |
| .resource = au1100_mmc1_res, |
| }; |
| |
| /******************************************************************************/ |
| |
| static void db1000_irda_set_phy_mode(int mode) |
| { |
| unsigned short mask = BCSR_RESETS_IRDA_MODE_MASK | BCSR_RESETS_FIR_SEL; |
| |
| switch (mode) { |
| case AU1000_IRDA_PHY_MODE_OFF: |
| bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_OFF); |
| break; |
| case AU1000_IRDA_PHY_MODE_SIR: |
| bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL); |
| break; |
| case AU1000_IRDA_PHY_MODE_FIR: |
| bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL | |
| BCSR_RESETS_FIR_SEL); |
| break; |
| } |
| } |
| |
| static struct au1k_irda_platform_data db1000_irda_platdata = { |
| .set_phy_mode = db1000_irda_set_phy_mode, |
| }; |
| |
| static struct resource au1000_irda_res[] = { |
| [0] = { |
| .start = AU1000_IRDA_PHYS_ADDR, |
| .end = AU1000_IRDA_PHYS_ADDR + 0x0fff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AU1000_IRDA_TX_INT, |
| .end = AU1000_IRDA_TX_INT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = AU1000_IRDA_RX_INT, |
| .end = AU1000_IRDA_RX_INT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device db1000_irda_dev = { |
| .name = "au1000-irda", |
| .id = -1, |
| .dev = { |
| .platform_data = &db1000_irda_platdata, |
| }, |
| .resource = au1000_irda_res, |
| .num_resources = ARRAY_SIZE(au1000_irda_res), |
| }; |
| |
| /******************************************************************************/ |
| |
| static struct ads7846_platform_data db1100_touch_pd = { |
| .model = 7846, |
| .vref_mv = 3300, |
| .gpio_pendown = 21, |
| }; |
| |
| static struct spi_gpio_platform_data db1100_spictl_pd = { |
| .sck = 209, |
| .mosi = 208, |
| .miso = 207, |
| .num_chipselect = 1, |
| }; |
| |
| static struct spi_board_info db1100_spi_info[] __initdata = { |
| [0] = { |
| .modalias = "ads7846", |
| .max_speed_hz = 3250000, |
| .bus_num = 0, |
| .chip_select = 0, |
| .mode = 0, |
| .irq = AU1100_GPIO21_INT, |
| .platform_data = &db1100_touch_pd, |
| .controller_data = (void *)210, /* for spi_gpio: CS# GPIO210 */ |
| }, |
| }; |
| |
| static struct platform_device db1100_spi_dev = { |
| .name = "spi_gpio", |
| .id = 0, |
| .dev = { |
| .platform_data = &db1100_spictl_pd, |
| }, |
| }; |
| |
| |
| static struct platform_device *db1x00_devs[] = { |
| &db1x00_codec_dev, |
| &alchemy_ac97c_dma_dev, |
| &alchemy_ac97c_dev, |
| &db1x00_audio_dev, |
| }; |
| |
| static struct platform_device *db1000_devs[] = { |
| &db1000_irda_dev, |
| }; |
| |
| static struct platform_device *db1100_devs[] = { |
| &au1100_lcd_device, |
| &db1100_mmc0_dev, |
| &db1100_mmc1_dev, |
| &db1000_irda_dev, |
| }; |
| |
| static int __init db1000_dev_init(void) |
| { |
| int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); |
| int c0, c1, d0, d1, s0, s1, flashsize = 32, twosocks = 1; |
| unsigned long pfc; |
| |
| if (board == BCSR_WHOAMI_DB1500) { |
| c0 = AU1500_GPIO2_INT; |
| c1 = AU1500_GPIO5_INT; |
| d0 = AU1500_GPIO0_INT; |
| d1 = AU1500_GPIO3_INT; |
| s0 = AU1500_GPIO1_INT; |
| s1 = AU1500_GPIO4_INT; |
| } else if (board == BCSR_WHOAMI_DB1100) { |
| c0 = AU1100_GPIO2_INT; |
| c1 = AU1100_GPIO5_INT; |
| d0 = AU1100_GPIO0_INT; |
| d1 = AU1100_GPIO3_INT; |
| s0 = AU1100_GPIO1_INT; |
| s1 = AU1100_GPIO4_INT; |
| |
| gpio_request(19, "sd0_cd"); |
| gpio_request(20, "sd1_cd"); |
| gpio_direction_input(19); /* sd0 cd# */ |
| gpio_direction_input(20); /* sd1 cd# */ |
| |
| /* spi_gpio on SSI0 pins */ |
| pfc = __raw_readl((void __iomem *)SYS_PINFUNC); |
| pfc |= (1 << 0); /* SSI0 pins as GPIOs */ |
| __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); |
| wmb(); |
| |
| spi_register_board_info(db1100_spi_info, |
| ARRAY_SIZE(db1100_spi_info)); |
| |
| platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs)); |
| platform_device_register(&db1100_spi_dev); |
| } else if (board == BCSR_WHOAMI_DB1000) { |
| c0 = AU1000_GPIO2_INT; |
| c1 = AU1000_GPIO5_INT; |
| d0 = AU1000_GPIO0_INT; |
| d1 = AU1000_GPIO3_INT; |
| s0 = AU1000_GPIO1_INT; |
| s1 = AU1000_GPIO4_INT; |
| platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs)); |
| } else if ((board == BCSR_WHOAMI_PB1500) || |
| (board == BCSR_WHOAMI_PB1500R2)) { |
| c0 = AU1500_GPIO203_INT; |
| d0 = AU1500_GPIO201_INT; |
| s0 = AU1500_GPIO202_INT; |
| twosocks = 0; |
| flashsize = 64; |
| /* RTC and daughtercard irqs */ |
| irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW); |
| irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW); |
| /* EPSON S1D13806 0x1b000000 |
| * SRAM 1MB/2MB 0x1a000000 |
| * DS1693 RTC 0x0c000000 |
| */ |
| } else if (board == BCSR_WHOAMI_PB1100) { |
| c0 = AU1100_GPIO11_INT; |
| d0 = AU1100_GPIO9_INT; |
| s0 = AU1100_GPIO10_INT; |
| twosocks = 0; |
| flashsize = 64; |
| /* pendown, rtc, daughtercard irqs */ |
| irq_set_irq_type(AU1100_GPIO8_INT, IRQ_TYPE_LEVEL_LOW); |
| irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW); |
| irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW); |
| /* EPSON S1D13806 0x1b000000 |
| * SRAM 1MB/2MB 0x1a000000 |
| * DiskOnChip 0x0d000000 |
| * DS1693 RTC 0x0c000000 |
| */ |
| platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs)); |
| } else |
| return 0; /* unknown board, no further dev setup to do */ |
| |
| irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH); |
| irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW); |
| irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW); |
| |
| db1x_register_pcmcia_socket( |
| AU1000_PCMCIA_ATTR_PHYS_ADDR, |
| AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, |
| AU1000_PCMCIA_MEM_PHYS_ADDR, |
| AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, |
| AU1000_PCMCIA_IO_PHYS_ADDR, |
| AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, |
| c0, d0, /*s0*/0, 0, 0); |
| |
| if (twosocks) { |
| irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH); |
| irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW); |
| irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW); |
| |
| db1x_register_pcmcia_socket( |
| AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000, |
| AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, |
| AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000, |
| AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, |
| AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000, |
| AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, |
| c1, d1, /*s1*/0, 0, 1); |
| } |
| |
| platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs)); |
| db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED); |
| return 0; |
| } |
| device_initcall(db1000_dev_init); |