| /* head-uc-fr555.S: FR555 uc-linux specific bits of initialisation |
| * |
| * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. |
| * Written by David Howells (dhowells@redhat.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/threads.h> |
| #include <linux/linkage.h> |
| #include <asm/ptrace.h> |
| #include <asm/page.h> |
| #include <asm/spr-regs.h> |
| #include <asm/mb86943a.h> |
| #include "head.inc" |
| |
| |
| #define __551_DARS0 0xfeff0100 |
| #define __551_DARS1 0xfeff0104 |
| #define __551_DARS2 0xfeff0108 |
| #define __551_DARS3 0xfeff010c |
| #define __551_DAMK0 0xfeff0110 |
| #define __551_DAMK1 0xfeff0114 |
| #define __551_DAMK2 0xfeff0118 |
| #define __551_DAMK3 0xfeff011c |
| #define __551_LCR 0xfeff1100 |
| #define __551_LSBR 0xfeff1c00 |
| |
| .section .text.init,"ax" |
| .balign 4 |
| |
| ############################################################################### |
| # |
| # describe the position and layout of the SDRAM controller registers |
| # |
| # ENTRY: EXIT: |
| # GR5 - cacheline size |
| # GR11 - displacement of 2nd SDRAM addr reg from GR14 |
| # GR12 - displacement of 3rd SDRAM addr reg from GR14 |
| # GR13 - displacement of 4th SDRAM addr reg from GR14 |
| # GR14 - address of 1st SDRAM addr reg |
| # GR15 - amount to shift address by to match SDRAM addr reg |
| # GR26 &__head_reference [saved] |
| # GR30 LED address [saved] |
| # CC0 - T if DARS0 is present |
| # CC1 - T if DARS1 is present |
| # CC2 - T if DARS2 is present |
| # CC3 - T if DARS3 is present |
| # |
| ############################################################################### |
| .globl __head_fr555_describe_sdram |
| __head_fr555_describe_sdram: |
| sethi.p %hi(__551_DARS0),gr14 |
| setlo %lo(__551_DARS0),gr14 |
| setlos.p #__551_DARS1-__551_DARS0,gr11 |
| setlos #__551_DARS2-__551_DARS0,gr12 |
| setlos.p #__551_DARS3-__551_DARS0,gr13 |
| setlos #64,gr5 ; cacheline size |
| setlos #20,gr15 ; amount to shift addr by |
| setlos #0x00ff,gr4 |
| movgs gr4,cccr ; extant DARS/DAMK regs |
| bralr |
| |
| ############################################################################### |
| # |
| # rearrange the bus controller registers |
| # |
| # ENTRY: EXIT: |
| # GR26 &__head_reference [saved] |
| # GR30 LED address revised LED address |
| # |
| ############################################################################### |
| .globl __head_fr555_set_busctl |
| __head_fr555_set_busctl: |
| LEDS 0x100f |
| sethi.p %hi(__551_LSBR),gr10 |
| setlo %lo(__551_LSBR),gr10 |
| sethi.p %hi(__551_LCR),gr11 |
| setlo %lo(__551_LCR),gr11 |
| |
| # set the bus controller |
| sethi.p %hi(__region_CS1),gr4 |
| setlo %lo(__region_CS1),gr4 |
| sethi.p %hi(__region_CS1_M),gr5 |
| setlo %lo(__region_CS1_M),gr5 |
| sethi.p %hi(__region_CS1_C),gr6 |
| setlo %lo(__region_CS1_C),gr6 |
| sti gr4,@(gr10,#1*0x08) |
| sti gr5,@(gr10,#1*0x08+0x100) |
| sti gr6,@(gr11,#1*0x08) |
| sethi.p %hi(__region_CS2),gr4 |
| setlo %lo(__region_CS2),gr4 |
| sethi.p %hi(__region_CS2_M),gr5 |
| setlo %lo(__region_CS2_M),gr5 |
| sethi.p %hi(__region_CS2_C),gr6 |
| setlo %lo(__region_CS2_C),gr6 |
| sti gr4,@(gr10,#2*0x08) |
| sti gr5,@(gr10,#2*0x08+0x100) |
| sti gr6,@(gr11,#2*0x08) |
| sethi.p %hi(__region_CS3),gr4 |
| setlo %lo(__region_CS3),gr4 |
| sethi.p %hi(__region_CS3_M),gr5 |
| setlo %lo(__region_CS3_M),gr5 |
| sethi.p %hi(__region_CS3_C),gr6 |
| setlo %lo(__region_CS3_C),gr6 |
| sti gr4,@(gr10,#3*0x08) |
| sti gr5,@(gr10,#3*0x08+0x100) |
| sti gr6,@(gr11,#3*0x08) |
| sethi.p %hi(__region_CS4),gr4 |
| setlo %lo(__region_CS4),gr4 |
| sethi.p %hi(__region_CS4_M),gr5 |
| setlo %lo(__region_CS4_M),gr5 |
| sethi.p %hi(__region_CS4_C),gr6 |
| setlo %lo(__region_CS4_C),gr6 |
| sti gr4,@(gr10,#4*0x08) |
| sti gr5,@(gr10,#4*0x08+0x100) |
| sti gr6,@(gr11,#4*0x08) |
| sethi.p %hi(__region_CS5),gr4 |
| setlo %lo(__region_CS5),gr4 |
| sethi.p %hi(__region_CS5_M),gr5 |
| setlo %lo(__region_CS5_M),gr5 |
| sethi.p %hi(__region_CS5_C),gr6 |
| setlo %lo(__region_CS5_C),gr6 |
| sti gr4,@(gr10,#5*0x08) |
| sti gr5,@(gr10,#5*0x08+0x100) |
| sti gr6,@(gr11,#5*0x08) |
| sethi.p %hi(__region_CS6),gr4 |
| setlo %lo(__region_CS6),gr4 |
| sethi.p %hi(__region_CS6_M),gr5 |
| setlo %lo(__region_CS6_M),gr5 |
| sethi.p %hi(__region_CS6_C),gr6 |
| setlo %lo(__region_CS6_C),gr6 |
| sti gr4,@(gr10,#6*0x08) |
| sti gr5,@(gr10,#6*0x08+0x100) |
| sti gr6,@(gr11,#6*0x08) |
| sethi.p %hi(__region_CS7),gr4 |
| setlo %lo(__region_CS7),gr4 |
| sethi.p %hi(__region_CS7_M),gr5 |
| setlo %lo(__region_CS7_M),gr5 |
| sethi.p %hi(__region_CS7_C),gr6 |
| setlo %lo(__region_CS7_C),gr6 |
| sti gr4,@(gr10,#7*0x08) |
| sti gr5,@(gr10,#7*0x08+0x100) |
| sti gr6,@(gr11,#7*0x08) |
| membar |
| bar |
| |
| # adjust LED bank address |
| #ifdef CONFIG_MB93091_VDK |
| sethi.p %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30 |
| setlo %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30 |
| #endif |
| bralr |
| |
| ############################################################################### |
| # |
| # determine the total SDRAM size |
| # |
| # ENTRY: EXIT: |
| # GR25 - SDRAM size |
| # GR26 &__head_reference [saved] |
| # GR30 LED address [saved] |
| # |
| ############################################################################### |
| .globl __head_fr555_survey_sdram |
| __head_fr555_survey_sdram: |
| sethi.p %hi(__551_DAMK0),gr11 |
| setlo %lo(__551_DAMK0),gr11 |
| sethi.p %hi(__551_DARS0),gr12 |
| setlo %lo(__551_DARS0),gr12 |
| |
| sethi.p %hi(0xfff),gr17 ; unused SDRAM AMK value |
| setlo %lo(0xfff),gr17 |
| setlos #0,gr25 |
| |
| ldi @(gr11,#0x00),gr6 ; DAMK0: bits 11:0 match addr 11:0 |
| subcc gr6,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS0 |
| ldi @(gr12,#0x00),gr4 ; DARS0 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS0: |
| |
| ldi @(gr11,#0x04),gr6 ; DAMK1: bits 11:0 match addr 11:0 |
| subcc gr6,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS1 |
| ldi @(gr12,#0x04),gr4 ; DARS1 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS1: |
| |
| ldi @(gr11,#0x8),gr6 ; DAMK2: bits 11:0 match addr 11:0 |
| subcc gr6,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS2 |
| ldi @(gr12,#0x8),gr4 ; DARS2 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS2: |
| |
| ldi @(gr11,#0xc),gr6 ; DAMK3: bits 11:0 match addr 11:0 |
| subcc gr6,gr17,gr0,icc0 |
| beq icc0,#0,__head_no_DCS3 |
| ldi @(gr12,#0xc),gr4 ; DARS3 |
| add gr25,gr6,gr25 |
| addi gr25,#1,gr25 |
| __head_no_DCS3: |
| |
| slli gr25,#20,gr25 ; shift [11:0] -> [31:20] |
| bralr |
| |
| ############################################################################### |
| # |
| # set the protection map with the I/DAMPR registers |
| # |
| # ENTRY: EXIT: |
| # GR25 SDRAM size saved |
| # GR30 LED address saved |
| # |
| ############################################################################### |
| .globl __head_fr555_set_protection |
| __head_fr555_set_protection: |
| movsg lr,gr27 |
| |
| sethi.p %hi(0xfff00000),gr11 |
| setlo %lo(0xfff00000),gr11 |
| |
| # set the I/O region protection registers for FR555 |
| sethi.p %hi(__region_IO),gr7 |
| setlo %lo(__region_IO),gr7 |
| ori gr7,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5 |
| movgs gr0,iampr15 |
| movgs gr0,iamlr15 |
| movgs gr5,dampr15 |
| movgs gr7,damlr15 |
| |
| # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible |
| # - start with the highest numbered registers |
| sethi.p %hi(__kernel_image_end),gr8 |
| setlo %lo(__kernel_image_end),gr8 |
| sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap |
| setlo %lo(32768),gr4 |
| add gr8,gr4,gr8 |
| sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB |
| setlo %lo(1024*2048-1),gr4 |
| add.p gr8,gr4,gr8 |
| not gr4,gr4 |
| and gr8,gr4,gr8 |
| |
| sethi.p %hi(__page_offset),gr9 |
| setlo %lo(__page_offset),gr9 |
| add gr9,gr25,gr9 |
| |
| # GR8 = base of uncovered RAM |
| # GR9 = top of uncovered RAM |
| # GR11 - mask for DAMLR/IAMLR regs |
| # |
| call __head_split_region |
| movgs gr4,iampr14 |
| movgs gr6,iamlr14 |
| movgs gr5,dampr14 |
| movgs gr7,damlr14 |
| call __head_split_region |
| movgs gr4,iampr13 |
| movgs gr6,iamlr13 |
| movgs gr5,dampr13 |
| movgs gr7,damlr13 |
| call __head_split_region |
| movgs gr4,iampr12 |
| movgs gr6,iamlr12 |
| movgs gr5,dampr12 |
| movgs gr7,damlr12 |
| call __head_split_region |
| movgs gr4,iampr11 |
| movgs gr6,iamlr11 |
| movgs gr5,dampr11 |
| movgs gr7,damlr11 |
| call __head_split_region |
| movgs gr4,iampr10 |
| movgs gr6,iamlr10 |
| movgs gr5,dampr10 |
| movgs gr7,damlr10 |
| call __head_split_region |
| movgs gr4,iampr9 |
| movgs gr6,iamlr9 |
| movgs gr5,dampr9 |
| movgs gr7,damlr9 |
| call __head_split_region |
| movgs gr4,iampr8 |
| movgs gr6,iamlr8 |
| movgs gr5,dampr8 |
| movgs gr7,damlr8 |
| |
| call __head_split_region |
| movgs gr4,iampr7 |
| movgs gr6,iamlr7 |
| movgs gr5,dampr7 |
| movgs gr7,damlr7 |
| call __head_split_region |
| movgs gr4,iampr6 |
| movgs gr6,iamlr6 |
| movgs gr5,dampr6 |
| movgs gr7,damlr6 |
| call __head_split_region |
| movgs gr4,iampr5 |
| movgs gr6,iamlr5 |
| movgs gr5,dampr5 |
| movgs gr7,damlr5 |
| call __head_split_region |
| movgs gr4,iampr4 |
| movgs gr6,iamlr4 |
| movgs gr5,dampr4 |
| movgs gr7,damlr4 |
| call __head_split_region |
| movgs gr4,iampr3 |
| movgs gr6,iamlr3 |
| movgs gr5,dampr3 |
| movgs gr7,damlr3 |
| call __head_split_region |
| movgs gr4,iampr2 |
| movgs gr6,iamlr2 |
| movgs gr5,dampr2 |
| movgs gr7,damlr2 |
| call __head_split_region |
| movgs gr4,iampr1 |
| movgs gr6,iamlr1 |
| movgs gr5,dampr1 |
| movgs gr7,damlr1 |
| |
| # cover kernel core image with kernel-only segment |
| sethi.p %hi(__page_offset),gr8 |
| setlo %lo(__page_offset),gr8 |
| call __head_split_region |
| |
| #ifdef CONFIG_PROTECT_KERNEL |
| ori.p gr4,#xAMPRx_S_KERNEL,gr4 |
| ori gr5,#xAMPRx_S_KERNEL,gr5 |
| #endif |
| |
| movgs gr4,iampr0 |
| movgs gr6,iamlr0 |
| movgs gr5,dampr0 |
| movgs gr7,damlr0 |
| jmpl @(gr27,gr0) |