drivers/net/wireless/st/cw1200/scan.c - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 /*
  * Scan implementation for ST-Ericsson CW1200 mac80211 drivers
  *
  * Copyright (c) 2010, ST-Ericsson
  * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/sched.h>
 #include "cw1200.h"
 #include "scan.h"
 #include "sta.h"
 #include "pm.h"

 static void cw1200_scan_restart_delayed(struct cw1200_common *priv);

 static int cw1200_scan_start(struct cw1200_common *priv, struct wsm_scan *scan)
 {
 	int ret, i;
 	int tmo = 2000;

 	switch (priv->join_status) {
 	case CW1200_JOIN_STATUS_PRE_STA:
 	case CW1200_JOIN_STATUS_JOINING:
 		return -EBUSY;
 	default:
 		break;
 	}

 	wiphy_dbg(priv->hw->wiphy, "[SCAN] hw req, type %d, %d channels, flags: 0x%x.\n",
 		  scan->type, scan->num_channels, scan->flags);

 	for (i = 0; i < scan->num_channels; ++i)
 		tmo += scan->ch[i].max_chan_time + 10;

 	cancel_delayed_work_sync(&priv->clear_recent_scan_work);
 	atomic_set(&priv->scan.in_progress, 1);
 	atomic_set(&priv->recent_scan, 1);
 	cw1200_pm_stay_awake(&priv->pm_state, msecs_to_jiffies(tmo));
 	queue_delayed_work(priv->workqueue, &priv->scan.timeout,
 			   msecs_to_jiffies(tmo));
 	ret = wsm_scan(priv, scan);
 	if (ret) {
 		atomic_set(&priv->scan.in_progress, 0);
 		cancel_delayed_work_sync(&priv->scan.timeout);
 		cw1200_scan_restart_delayed(priv);
 	}
 	return ret;
 }

 int cw1200_hw_scan(struct ieee80211_hw *hw,
 		   struct ieee80211_vif *vif,
 		   struct ieee80211_scan_request *hw_req)
 {
 	struct cw1200_common *priv = hw->priv;
 	struct cfg80211_scan_request *req = &hw_req->req;
 	struct wsm_template_frame frame = {
 		.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
 	};
 	int i, ret;

 	if (!priv->vif)
 		return -EINVAL;

 	/* Scan when P2P_GO corrupt firmware MiniAP mode */
 	if (priv->join_status == CW1200_JOIN_STATUS_AP)
 		return -EOPNOTSUPP;

 	if (req->n_ssids == 1 && !req->ssids[0].ssid_len)
 		req->n_ssids = 0;

 	wiphy_dbg(hw->wiphy, "[SCAN] Scan request for %d SSIDs.\n",
 		  req->n_ssids);

 	if (req->n_ssids > WSM_SCAN_MAX_NUM_OF_SSIDS)
 		return -EINVAL;

 	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
 		req->ie_len);
 	if (!frame.skb)
 		return -ENOMEM;

 	if (req->ie_len)
 		memcpy(skb_put(frame.skb, req->ie_len), req->ie, req->ie_len);

 	/* will be unlocked in cw1200_scan_work() */
 	down(&priv->scan.lock);
 	mutex_lock(&priv->conf_mutex);

 	ret = wsm_set_template_frame(priv, &frame);
 	if (!ret) {
 		/* Host want to be the probe responder. */
 		ret = wsm_set_probe_responder(priv, true);
 	}
 	if (ret) {
 		mutex_unlock(&priv->conf_mutex);
 		up(&priv->scan.lock);
 		dev_kfree_skb(frame.skb);
 		return ret;
 	}

 	wsm_lock_tx(priv);

 	BUG_ON(priv->scan.req);
 	priv->scan.req = req;
 	priv->scan.n_ssids = 0;
 	priv->scan.status = 0;
 	priv->scan.begin = &req->channels[0];
 	priv->scan.curr = priv->scan.begin;
 	priv->scan.end = &req->channels[req->n_channels];
 	priv->scan.output_power = priv->output_power;

 	for (i = 0; i < req->n_ssids; ++i) {
 		struct wsm_ssid *dst = &priv->scan.ssids[priv->scan.n_ssids];
 		memcpy(&dst->ssid[0], req->ssids[i].ssid, sizeof(dst->ssid));
 		dst->length = req->ssids[i].ssid_len;
 		++priv->scan.n_ssids;
 	}

 	mutex_unlock(&priv->conf_mutex);

 	if (frame.skb)
 		dev_kfree_skb(frame.skb);
 	queue_work(priv->workqueue, &priv->scan.work);
 	return 0;
 }

 void cw1200_scan_work(struct work_struct *work)
 {
 	struct cw1200_common *priv = container_of(work, struct cw1200_common,
 							scan.work);
 	struct ieee80211_channel **it;
 	struct wsm_scan scan = {
 		.type = WSM_SCAN_TYPE_FOREGROUND,
 		.flags = WSM_SCAN_FLAG_SPLIT_METHOD,
 	};
 	bool first_run = (priv->scan.begin == priv->scan.curr &&
 			  priv->scan.begin != priv->scan.end);
 	int i;

 	if (first_run) {
 		/* Firmware gets crazy if scan request is sent
 		 * when STA is joined but not yet associated.
 		 * Force unjoin in this case.
 		 */
 		if (cancel_delayed_work_sync(&priv->join_timeout) > 0)
 			cw1200_join_timeout(&priv->join_timeout.work);
 	}

 	mutex_lock(&priv->conf_mutex);

 	if (first_run) {
 		if (priv->join_status == CW1200_JOIN_STATUS_STA &&
 		    !(priv->powersave_mode.mode & WSM_PSM_PS)) {
 			struct wsm_set_pm pm = priv->powersave_mode;
 			pm.mode = WSM_PSM_PS;
 			cw1200_set_pm(priv, &pm);
 		} else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
 			/* FW bug: driver has to restart p2p-dev mode
 			 * after scan
 			 */
 			cw1200_disable_listening(priv);
 		}
 	}

 	if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) {
 		struct cfg80211_scan_info info = {
 			.aborted = priv->scan.status ? 1 : 0,
 		};

 		if (priv->scan.output_power != priv->output_power)
 			wsm_set_output_power(priv, priv->output_power * 10);
 		if (priv->join_status == CW1200_JOIN_STATUS_STA &&
 		    !(priv->powersave_mode.mode & WSM_PSM_PS))
 			cw1200_set_pm(priv, &priv->powersave_mode);

 		if (priv->scan.status < 0)
 			wiphy_warn(priv->hw->wiphy,
 				   "[SCAN] Scan failed (%d).\n",
 				   priv->scan.status);
 		else if (priv->scan.req)
 			wiphy_dbg(priv->hw->wiphy,
 				  "[SCAN] Scan completed.\n");
 		else
 			wiphy_dbg(priv->hw->wiphy,
 				  "[SCAN] Scan canceled.\n");

 		priv->scan.req = NULL;
 		cw1200_scan_restart_delayed(priv);
 		wsm_unlock_tx(priv);
 		mutex_unlock(&priv->conf_mutex);
 		ieee80211_scan_completed(priv->hw, &info);
 		up(&priv->scan.lock);
 		return;
 	} else {
 		struct ieee80211_channel *first = *priv->scan.curr;
 		for (it = priv->scan.curr + 1, i = 1;
 		     it != priv->scan.end && i < WSM_SCAN_MAX_NUM_OF_CHANNELS;
 		     ++it, ++i) {
 			if ((*it)->band != first->band)
 				break;
 			if (((*it)->flags ^ first->flags) &
 					IEEE80211_CHAN_NO_IR)
 				break;
 			if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
 			    (*it)->max_power != first->max_power)
 				break;
 		}
 		scan.band = first->band;

 		if (priv->scan.req->no_cck)
 			scan.max_tx_rate = WSM_TRANSMIT_RATE_6;
 		else
 			scan.max_tx_rate = WSM_TRANSMIT_RATE_1;
 		scan.num_probes =
 			(first->flags & IEEE80211_CHAN_NO_IR) ? 0 : 2;
 		scan.num_ssids = priv->scan.n_ssids;
 		scan.ssids = &priv->scan.ssids[0];
 		scan.num_channels = it - priv->scan.curr;
 		/* TODO: Is it optimal? */
 		scan.probe_delay = 100;
 		/* It is not stated in WSM specification, however
 		 * FW team says that driver may not use FG scan
 		 * when joined.
 		 */
 		if (priv->join_status == CW1200_JOIN_STATUS_STA) {
 			scan.type = WSM_SCAN_TYPE_BACKGROUND;
 			scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
 		}
 		scan.ch = kzalloc(
 			sizeof(struct wsm_scan_ch) * (it - priv->scan.curr),
 			GFP_KERNEL);
 		if (!scan.ch) {
 			priv->scan.status = -ENOMEM;
 			goto fail;
 		}
 		for (i = 0; i < scan.num_channels; ++i) {
 			scan.ch[i].number = priv->scan.curr[i]->hw_value;
 			if (priv->scan.curr[i]->flags & IEEE80211_CHAN_NO_IR) {
 				scan.ch[i].min_chan_time = 50;
 				scan.ch[i].max_chan_time = 100;
 			} else {
 				scan.ch[i].min_chan_time = 10;
 				scan.ch[i].max_chan_time = 25;
 			}
 		}
 		if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
 		    priv->scan.output_power != first->max_power) {
 			priv->scan.output_power = first->max_power;
 			wsm_set_output_power(priv,
 					     priv->scan.output_power * 10);
 		}
 		priv->scan.status = cw1200_scan_start(priv, &scan);
 		kfree(scan.ch);
 		if (priv->scan.status)
 			goto fail;
 		priv->scan.curr = it;
 	}
 	mutex_unlock(&priv->conf_mutex);
 	return;

 fail:
 	priv->scan.curr = priv->scan.end;
 	mutex_unlock(&priv->conf_mutex);
 	queue_work(priv->workqueue, &priv->scan.work);
 	return;
 }

 static void cw1200_scan_restart_delayed(struct cw1200_common *priv)
 {
 	/* FW bug: driver has to restart p2p-dev mode after scan. */
 	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
 		cw1200_enable_listening(priv);
 		cw1200_update_filtering(priv);
 	}

 	if (priv->delayed_unjoin) {
 		priv->delayed_unjoin = false;
 		if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0)
 			wsm_unlock_tx(priv);
 	} else if (priv->delayed_link_loss) {
 			wiphy_dbg(priv->hw->wiphy, "[CQM] Requeue BSS loss.\n");
 			priv->delayed_link_loss = 0;
 			cw1200_cqm_bssloss_sm(priv, 1, 0, 0);
 	}
 }

 static void cw1200_scan_complete(struct cw1200_common *priv)
 {
 	queue_delayed_work(priv->workqueue, &priv->clear_recent_scan_work, HZ);
 	if (priv->scan.direct_probe) {
 		wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe complete.\n");
 		cw1200_scan_restart_delayed(priv);
 		priv->scan.direct_probe = 0;
 		up(&priv->scan.lock);
 		wsm_unlock_tx(priv);
 	} else {
 		cw1200_scan_work(&priv->scan.work);
 	}
 }

 void cw1200_scan_failed_cb(struct cw1200_common *priv)
 {
 	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
 		/* STA is stopped. */
 		return;

 	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
 		priv->scan.status = -EIO;
 		queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
 	}
 }


 void cw1200_scan_complete_cb(struct cw1200_common *priv,
 				struct wsm_scan_complete *arg)
 {
 	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
 		/* STA is stopped. */
 		return;

 	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
 		priv->scan.status = 1;
 		queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
 	}
 }

 void cw1200_clear_recent_scan_work(struct work_struct *work)
 {
 	struct cw1200_common *priv =
 		container_of(work, struct cw1200_common,
 			     clear_recent_scan_work.work);
 	atomic_xchg(&priv->recent_scan, 0);
 }

 void cw1200_scan_timeout(struct work_struct *work)
 {
 	struct cw1200_common *priv =
 		container_of(work, struct cw1200_common, scan.timeout.work);
 	if (atomic_xchg(&priv->scan.in_progress, 0)) {
 		if (priv->scan.status > 0) {
 			priv->scan.status = 0;
 		} else if (!priv->scan.status) {
 			wiphy_warn(priv->hw->wiphy,
 				   "Timeout waiting for scan complete notification.\n");
 			priv->scan.status = -ETIMEDOUT;
 			priv->scan.curr = priv->scan.end;
 			wsm_stop_scan(priv);
 		}
 		cw1200_scan_complete(priv);
 	}
 }

 void cw1200_probe_work(struct work_struct *work)
 {
 	struct cw1200_common *priv =
 		container_of(work, struct cw1200_common, scan.probe_work.work);
 	u8 queue_id = cw1200_queue_get_queue_id(priv->pending_frame_id);
 	struct cw1200_queue *queue = &priv->tx_queue[queue_id];
 	const struct cw1200_txpriv *txpriv;
 	struct wsm_tx *wsm;
 	struct wsm_template_frame frame = {
 		.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
 	};
 	struct wsm_ssid ssids[1] = {{
 		.length = 0,
 	} };
 	struct wsm_scan_ch ch[1] = {{
 		.min_chan_time = 0,
 		.max_chan_time = 10,
 	} };
 	struct wsm_scan scan = {
 		.type = WSM_SCAN_TYPE_FOREGROUND,
 		.num_probes = 1,
 		.probe_delay = 0,
 		.num_channels = 1,
 		.ssids = ssids,
 		.ch = ch,
 	};
 	u8 *ies;
 	size_t ies_len;
 	int ret;

 	wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe work.\n");

 	mutex_lock(&priv->conf_mutex);
 	if (down_trylock(&priv->scan.lock)) {
 		/* Scan is already in progress. Requeue self. */
 		schedule();
 		queue_delayed_work(priv->workqueue, &priv->scan.probe_work,
 				   msecs_to_jiffies(100));
 		mutex_unlock(&priv->conf_mutex);
 		return;
 	}

 	/* Make sure we still have a pending probe req */
 	if (cw1200_queue_get_skb(queue,	priv->pending_frame_id,
 				 &frame.skb, &txpriv)) {
 		up(&priv->scan.lock);
 		mutex_unlock(&priv->conf_mutex);
 		wsm_unlock_tx(priv);
 		return;
 	}
 	wsm = (struct wsm_tx *)frame.skb->data;
 	scan.max_tx_rate = wsm->max_tx_rate;
 	scan.band = (priv->channel->band == NL80211_BAND_5GHZ) ?
 		WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
 	if (priv->join_status == CW1200_JOIN_STATUS_STA ||
 	    priv->join_status == CW1200_JOIN_STATUS_IBSS) {
 		scan.type = WSM_SCAN_TYPE_BACKGROUND;
 		scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
 	}
 	ch[0].number = priv->channel->hw_value;

 	skb_pull(frame.skb, txpriv->offset);

 	ies = &frame.skb->data[sizeof(struct ieee80211_hdr_3addr)];
 	ies_len = frame.skb->len - sizeof(struct ieee80211_hdr_3addr);

 	if (ies_len) {
 		u8 *ssidie =
 			(u8 *)cfg80211_find_ie(WLAN_EID_SSID, ies, ies_len);
 		if (ssidie && ssidie[1] && ssidie[1] <= sizeof(ssids[0].ssid)) {
 			u8 *nextie = &ssidie[2 + ssidie[1]];
 			/* Remove SSID from the IE list. It has to be provided
 			 * as a separate argument in cw1200_scan_start call
 			 */

 			/* Store SSID localy */
 			ssids[0].length = ssidie[1];
 			memcpy(ssids[0].ssid, &ssidie[2], ssids[0].length);
 			scan.num_ssids = 1;

 			/* Remove SSID from IE list */
 			ssidie[1] = 0;
 			memmove(&ssidie[2], nextie, &ies[ies_len] - nextie);
 			skb_trim(frame.skb, frame.skb->len - ssids[0].length);
 		}
 	}

 	/* FW bug: driver has to restart p2p-dev mode after scan */
 	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR)
 		cw1200_disable_listening(priv);
 	ret = wsm_set_template_frame(priv, &frame);
 	priv->scan.direct_probe = 1;
 	if (!ret) {
 		wsm_flush_tx(priv);
 		ret = cw1200_scan_start(priv, &scan);
 	}
 	mutex_unlock(&priv->conf_mutex);

 	skb_push(frame.skb, txpriv->offset);
 	if (!ret)
 		IEEE80211_SKB_CB(frame.skb)->flags |= IEEE80211_TX_STAT_ACK;
 	BUG_ON(cw1200_queue_remove(queue, priv->pending_frame_id));

 	if (ret) {
 		priv->scan.direct_probe = 0;
 		up(&priv->scan.lock);
 		wsm_unlock_tx(priv);
 	}

 	return;
 }
	/*
	* Scan implementation for ST-Ericsson CW1200 mac80211 drivers
	*
	* Copyright (c) 2010, ST-Ericsson
	* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/sched.h>
	#include "cw1200.h"
	#include "scan.h"
	#include "sta.h"
	#include "pm.h"

	static void cw1200_scan_restart_delayed(struct cw1200_common *priv);

	static int cw1200_scan_start(struct cw1200_common priv, struct wsm_scan scan)
	{
	int ret, i;
	int tmo = 2000;

	switch (priv->join_status) {
	case CW1200_JOIN_STATUS_PRE_STA:
	case CW1200_JOIN_STATUS_JOINING:
	return -EBUSY;
	default:
	break;
	}

	wiphy_dbg(priv->hw->wiphy, "[SCAN] hw req, type %d, %d channels, flags: 0x%x.\n",
	scan->type, scan->num_channels, scan->flags);

	for (i = 0; i < scan->num_channels; ++i)
	tmo += scan->ch[i].max_chan_time + 10;

	cancel_delayed_work_sync(&priv->clear_recent_scan_work);
	atomic_set(&priv->scan.in_progress, 1);
	atomic_set(&priv->recent_scan, 1);
	cw1200_pm_stay_awake(&priv->pm_state, msecs_to_jiffies(tmo));
	queue_delayed_work(priv->workqueue, &priv->scan.timeout,
	msecs_to_jiffies(tmo));
	ret = wsm_scan(priv, scan);
	if (ret) {
	atomic_set(&priv->scan.in_progress, 0);
	cancel_delayed_work_sync(&priv->scan.timeout);
	cw1200_scan_restart_delayed(priv);
	}
	return ret;
	}

	int cw1200_hw_scan(struct ieee80211_hw *hw,
	struct ieee80211_vif *vif,
	struct ieee80211_scan_request *hw_req)
	{
	struct cw1200_common *priv = hw->priv;
	struct cfg80211_scan_request *req = &hw_req->req;
	struct wsm_template_frame frame = {
	.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
	};
	int i, ret;

	if (!priv->vif)
	return -EINVAL;

	/* Scan when P2P_GO corrupt firmware MiniAP mode */
	if (priv->join_status == CW1200_JOIN_STATUS_AP)
	return -EOPNOTSUPP;

	if (req->n_ssids == 1 && !req->ssids[0].ssid_len)
	req->n_ssids = 0;

	wiphy_dbg(hw->wiphy, "[SCAN] Scan request for %d SSIDs.\n",
	req->n_ssids);

	if (req->n_ssids > WSM_SCAN_MAX_NUM_OF_SSIDS)
	return -EINVAL;

	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
	req->ie_len);
	if (!frame.skb)
	return -ENOMEM;

	if (req->ie_len)
	memcpy(skb_put(frame.skb, req->ie_len), req->ie, req->ie_len);

	/* will be unlocked in cw1200_scan_work() */
	down(&priv->scan.lock);
	mutex_lock(&priv->conf_mutex);

	ret = wsm_set_template_frame(priv, &frame);
	if (!ret) {
	/* Host want to be the probe responder. */
	ret = wsm_set_probe_responder(priv, true);
	}
	if (ret) {
	mutex_unlock(&priv->conf_mutex);
	up(&priv->scan.lock);
	dev_kfree_skb(frame.skb);
	return ret;
	}

	wsm_lock_tx(priv);

	BUG_ON(priv->scan.req);
	priv->scan.req = req;
	priv->scan.n_ssids = 0;
	priv->scan.status = 0;
	priv->scan.begin = &req->channels[0];
	priv->scan.curr = priv->scan.begin;
	priv->scan.end = &req->channels[req->n_channels];
	priv->scan.output_power = priv->output_power;

	for (i = 0; i < req->n_ssids; ++i) {
	struct wsm_ssid *dst = &priv->scan.ssids[priv->scan.n_ssids];
	memcpy(&dst->ssid[0], req->ssids[i].ssid, sizeof(dst->ssid));
	dst->length = req->ssids[i].ssid_len;
	++priv->scan.n_ssids;
	}

	mutex_unlock(&priv->conf_mutex);

	if (frame.skb)
	dev_kfree_skb(frame.skb);
	queue_work(priv->workqueue, &priv->scan.work);
	return 0;
	}

	void cw1200_scan_work(struct work_struct *work)
	{
	struct cw1200_common *priv = container_of(work, struct cw1200_common,
	scan.work);
	struct ieee80211_channel **it;
	struct wsm_scan scan = {
	.type = WSM_SCAN_TYPE_FOREGROUND,
	.flags = WSM_SCAN_FLAG_SPLIT_METHOD,
	};
	bool first_run = (priv->scan.begin == priv->scan.curr &&
	priv->scan.begin != priv->scan.end);
	int i;

	if (first_run) {
	/* Firmware gets crazy if scan request is sent
	* when STA is joined but not yet associated.
	* Force unjoin in this case.
	*/
	if (cancel_delayed_work_sync(&priv->join_timeout) > 0)
	cw1200_join_timeout(&priv->join_timeout.work);
	}

	mutex_lock(&priv->conf_mutex);

	if (first_run) {
	if (priv->join_status == CW1200_JOIN_STATUS_STA &&
	!(priv->powersave_mode.mode & WSM_PSM_PS)) {
	struct wsm_set_pm pm = priv->powersave_mode;
	pm.mode = WSM_PSM_PS;
	cw1200_set_pm(priv, &pm);
	} else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
	/* FW bug: driver has to restart p2p-dev mode
	* after scan
	*/
	cw1200_disable_listening(priv);
	}
	}

	if (!priv->scan.req \|\| (priv->scan.curr == priv->scan.end)) {
	struct cfg80211_scan_info info = {
	.aborted = priv->scan.status ? 1 : 0,
	};

	if (priv->scan.output_power != priv->output_power)
	wsm_set_output_power(priv, priv->output_power * 10);
	if (priv->join_status == CW1200_JOIN_STATUS_STA &&
	!(priv->powersave_mode.mode & WSM_PSM_PS))
	cw1200_set_pm(priv, &priv->powersave_mode);

	if (priv->scan.status < 0)
	wiphy_warn(priv->hw->wiphy,
	"[SCAN] Scan failed (%d).\n",
	priv->scan.status);
	else if (priv->scan.req)
	wiphy_dbg(priv->hw->wiphy,
	"[SCAN] Scan completed.\n");
	else
	wiphy_dbg(priv->hw->wiphy,
	"[SCAN] Scan canceled.\n");

	priv->scan.req = NULL;
	cw1200_scan_restart_delayed(priv);
	wsm_unlock_tx(priv);
	mutex_unlock(&priv->conf_mutex);
	ieee80211_scan_completed(priv->hw, &info);
	up(&priv->scan.lock);
	return;
	} else {
	struct ieee80211_channel first = priv->scan.curr;
	for (it = priv->scan.curr + 1, i = 1;
	it != priv->scan.end && i < WSM_SCAN_MAX_NUM_OF_CHANNELS;
	++it, ++i) {
	if ((*it)->band != first->band)
	break;
	if (((*it)->flags ^ first->flags) &
	IEEE80211_CHAN_NO_IR)
	break;
	if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
	(*it)->max_power != first->max_power)
	break;
	}
	scan.band = first->band;

	if (priv->scan.req->no_cck)
	scan.max_tx_rate = WSM_TRANSMIT_RATE_6;
	else
	scan.max_tx_rate = WSM_TRANSMIT_RATE_1;
	scan.num_probes =
	(first->flags & IEEE80211_CHAN_NO_IR) ? 0 : 2;
	scan.num_ssids = priv->scan.n_ssids;
	scan.ssids = &priv->scan.ssids[0];
	scan.num_channels = it - priv->scan.curr;
	/* TODO: Is it optimal? */
	scan.probe_delay = 100;
	/* It is not stated in WSM specification, however
	* FW team says that driver may not use FG scan
	* when joined.
	*/
	if (priv->join_status == CW1200_JOIN_STATUS_STA) {
	scan.type = WSM_SCAN_TYPE_BACKGROUND;
	scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
	}
	scan.ch = kzalloc(
	sizeof(struct wsm_scan_ch) * (it - priv->scan.curr),
	GFP_KERNEL);
	if (!scan.ch) {
	priv->scan.status = -ENOMEM;
	goto fail;
	}
	for (i = 0; i < scan.num_channels; ++i) {
	scan.ch[i].number = priv->scan.curr[i]->hw_value;
	if (priv->scan.curr[i]->flags & IEEE80211_CHAN_NO_IR) {
	scan.ch[i].min_chan_time = 50;
	scan.ch[i].max_chan_time = 100;
	} else {
	scan.ch[i].min_chan_time = 10;
	scan.ch[i].max_chan_time = 25;
	}
	}
	if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
	priv->scan.output_power != first->max_power) {
	priv->scan.output_power = first->max_power;
	wsm_set_output_power(priv,
	priv->scan.output_power * 10);
	}
	priv->scan.status = cw1200_scan_start(priv, &scan);
	kfree(scan.ch);
	if (priv->scan.status)
	goto fail;
	priv->scan.curr = it;
	}
	mutex_unlock(&priv->conf_mutex);
	return;

	fail:
	priv->scan.curr = priv->scan.end;
	mutex_unlock(&priv->conf_mutex);
	queue_work(priv->workqueue, &priv->scan.work);
	return;
	}

	static void cw1200_scan_restart_delayed(struct cw1200_common *priv)
	{
	/* FW bug: driver has to restart p2p-dev mode after scan. */
	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
	cw1200_enable_listening(priv);
	cw1200_update_filtering(priv);
	}

	if (priv->delayed_unjoin) {
	priv->delayed_unjoin = false;
	if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0)
	wsm_unlock_tx(priv);
	} else if (priv->delayed_link_loss) {
	wiphy_dbg(priv->hw->wiphy, "[CQM] Requeue BSS loss.\n");
	priv->delayed_link_loss = 0;
	cw1200_cqm_bssloss_sm(priv, 1, 0, 0);
	}
	}

	static void cw1200_scan_complete(struct cw1200_common *priv)
	{
	queue_delayed_work(priv->workqueue, &priv->clear_recent_scan_work, HZ);
	if (priv->scan.direct_probe) {
	wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe complete.\n");
	cw1200_scan_restart_delayed(priv);
	priv->scan.direct_probe = 0;
	up(&priv->scan.lock);
	wsm_unlock_tx(priv);
	} else {
	cw1200_scan_work(&priv->scan.work);
	}
	}

	void cw1200_scan_failed_cb(struct cw1200_common *priv)
	{
	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
	/* STA is stopped. */
	return;

	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
	priv->scan.status = -EIO;
	queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
	}
	}


	void cw1200_scan_complete_cb(struct cw1200_common *priv,
	struct wsm_scan_complete *arg)
	{
	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
	/* STA is stopped. */
	return;

	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
	priv->scan.status = 1;
	queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
	}
	}

	void cw1200_clear_recent_scan_work(struct work_struct *work)
	{
	struct cw1200_common *priv =
	container_of(work, struct cw1200_common,
	clear_recent_scan_work.work);
	atomic_xchg(&priv->recent_scan, 0);
	}

	void cw1200_scan_timeout(struct work_struct *work)
	{
	struct cw1200_common *priv =
	container_of(work, struct cw1200_common, scan.timeout.work);
	if (atomic_xchg(&priv->scan.in_progress, 0)) {
	if (priv->scan.status > 0) {
	priv->scan.status = 0;
	} else if (!priv->scan.status) {
	wiphy_warn(priv->hw->wiphy,
	"Timeout waiting for scan complete notification.\n");
	priv->scan.status = -ETIMEDOUT;
	priv->scan.curr = priv->scan.end;
	wsm_stop_scan(priv);
	}
	cw1200_scan_complete(priv);
	}
	}

	void cw1200_probe_work(struct work_struct *work)
	{
	struct cw1200_common *priv =
	container_of(work, struct cw1200_common, scan.probe_work.work);
	u8 queue_id = cw1200_queue_get_queue_id(priv->pending_frame_id);
	struct cw1200_queue *queue = &priv->tx_queue[queue_id];
	const struct cw1200_txpriv *txpriv;
	struct wsm_tx *wsm;
	struct wsm_template_frame frame = {
	.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
	};
	struct wsm_ssid ssids[1] = {{
	.length = 0,
	} };
	struct wsm_scan_ch ch[1] = {{
	.min_chan_time = 0,
	.max_chan_time = 10,
	} };
	struct wsm_scan scan = {
	.type = WSM_SCAN_TYPE_FOREGROUND,
	.num_probes = 1,
	.probe_delay = 0,
	.num_channels = 1,
	.ssids = ssids,
	.ch = ch,
	};
	u8 *ies;
	size_t ies_len;
	int ret;

	wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe work.\n");

	mutex_lock(&priv->conf_mutex);
	if (down_trylock(&priv->scan.lock)) {
	/* Scan is already in progress. Requeue self. */
	schedule();
	queue_delayed_work(priv->workqueue, &priv->scan.probe_work,
	msecs_to_jiffies(100));
	mutex_unlock(&priv->conf_mutex);
	return;
	}

	/* Make sure we still have a pending probe req */
	if (cw1200_queue_get_skb(queue, priv->pending_frame_id,
	&frame.skb, &txpriv)) {
	up(&priv->scan.lock);
	mutex_unlock(&priv->conf_mutex);
	wsm_unlock_tx(priv);
	return;
	}
	wsm = (struct wsm_tx *)frame.skb->data;
	scan.max_tx_rate = wsm->max_tx_rate;
	scan.band = (priv->channel->band == NL80211_BAND_5GHZ) ?
	WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
	if (priv->join_status == CW1200_JOIN_STATUS_STA \|\|
	priv->join_status == CW1200_JOIN_STATUS_IBSS) {
	scan.type = WSM_SCAN_TYPE_BACKGROUND;
	scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
	}
	ch[0].number = priv->channel->hw_value;

	skb_pull(frame.skb, txpriv->offset);

	ies = &frame.skb->data[sizeof(struct ieee80211_hdr_3addr)];
	ies_len = frame.skb->len - sizeof(struct ieee80211_hdr_3addr);

	if (ies_len) {
	u8 *ssidie =
	(u8 *)cfg80211_find_ie(WLAN_EID_SSID, ies, ies_len);
	if (ssidie && ssidie[1] && ssidie[1] <= sizeof(ssids[0].ssid)) {
	u8 *nextie = &ssidie[2 + ssidie[1]];
	/* Remove SSID from the IE list. It has to be provided
	* as a separate argument in cw1200_scan_start call
	*/

	/* Store SSID localy */
	ssids[0].length = ssidie[1];
	memcpy(ssids[0].ssid, &ssidie[2], ssids[0].length);
	scan.num_ssids = 1;

	/* Remove SSID from IE list */
	ssidie[1] = 0;
	memmove(&ssidie[2], nextie, &ies[ies_len] - nextie);
	skb_trim(frame.skb, frame.skb->len - ssids[0].length);
	}
	}

	/* FW bug: driver has to restart p2p-dev mode after scan */
	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR)
	cw1200_disable_listening(priv);
	ret = wsm_set_template_frame(priv, &frame);
	priv->scan.direct_probe = 1;
	if (!ret) {
	wsm_flush_tx(priv);
	ret = cw1200_scan_start(priv, &scan);
	}
	mutex_unlock(&priv->conf_mutex);

	skb_push(frame.skb, txpriv->offset);
	if (!ret)
	IEEE80211_SKB_CB(frame.skb)->flags \|= IEEE80211_TX_STAT_ACK;
	BUG_ON(cw1200_queue_remove(queue, priv->pending_frame_id));

	if (ret) {
	priv->scan.direct_probe = 0;
	up(&priv->scan.lock);
	wsm_unlock_tx(priv);
	}

	return;
	}