| /* |
| * Driver for DVBSky USB2.0 receiver |
| * |
| * Copyright (C) 2013 Max nibble <nibble.max@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "dvb_usb.h" |
| #include "m88ds3103.h" |
| #include "ts2020.h" |
| #include "sp2.h" |
| #include "si2168.h" |
| #include "si2157.h" |
| |
| #define DVBSKY_MSG_DELAY 0/*2000*/ |
| #define DVBSKY_BUF_LEN 64 |
| |
| static int dvb_usb_dvbsky_disable_rc; |
| module_param_named(disable_rc, dvb_usb_dvbsky_disable_rc, int, 0644); |
| MODULE_PARM_DESC(disable_rc, "Disable inbuilt IR receiver."); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| struct dvbsky_state { |
| struct mutex stream_mutex; |
| u8 ibuf[DVBSKY_BUF_LEN]; |
| u8 obuf[DVBSKY_BUF_LEN]; |
| u8 last_lock; |
| struct i2c_client *i2c_client_demod; |
| struct i2c_client *i2c_client_tuner; |
| struct i2c_client *i2c_client_ci; |
| |
| /* fe hook functions*/ |
| int (*fe_set_voltage)(struct dvb_frontend *fe, |
| enum fe_sec_voltage voltage); |
| int (*fe_read_status)(struct dvb_frontend *fe, |
| enum fe_status *status); |
| }; |
| |
| static int dvbsky_usb_generic_rw(struct dvb_usb_device *d, |
| u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) |
| { |
| int ret; |
| struct dvbsky_state *state = d_to_priv(d); |
| |
| mutex_lock(&d->usb_mutex); |
| if (wlen != 0) |
| memcpy(state->obuf, wbuf, wlen); |
| |
| ret = dvb_usbv2_generic_rw_locked(d, state->obuf, wlen, |
| state->ibuf, rlen); |
| |
| if (!ret && (rlen != 0)) |
| memcpy(rbuf, state->ibuf, rlen); |
| |
| mutex_unlock(&d->usb_mutex); |
| return ret; |
| } |
| |
| static int dvbsky_stream_ctrl(struct dvb_usb_device *d, u8 onoff) |
| { |
| struct dvbsky_state *state = d_to_priv(d); |
| int ret; |
| u8 obuf_pre[3] = { 0x37, 0, 0 }; |
| u8 obuf_post[3] = { 0x36, 3, 0 }; |
| |
| mutex_lock(&state->stream_mutex); |
| ret = dvbsky_usb_generic_rw(d, obuf_pre, 3, NULL, 0); |
| if (!ret && onoff) { |
| msleep(20); |
| ret = dvbsky_usb_generic_rw(d, obuf_post, 3, NULL, 0); |
| } |
| mutex_unlock(&state->stream_mutex); |
| return ret; |
| } |
| |
| static int dvbsky_streaming_ctrl(struct dvb_frontend *fe, int onoff) |
| { |
| struct dvb_usb_device *d = fe_to_d(fe); |
| |
| return dvbsky_stream_ctrl(d, (onoff == 0) ? 0 : 1); |
| } |
| |
| /* GPIO */ |
| static int dvbsky_gpio_ctrl(struct dvb_usb_device *d, u8 gport, u8 value) |
| { |
| int ret; |
| u8 obuf[3], ibuf[2]; |
| |
| obuf[0] = 0x0e; |
| obuf[1] = gport; |
| obuf[2] = value; |
| ret = dvbsky_usb_generic_rw(d, obuf, 3, ibuf, 1); |
| if (ret) |
| dev_err(&d->udev->dev, "failed=%d\n", ret); |
| return ret; |
| } |
| |
| /* I2C */ |
| static int dvbsky_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], |
| int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int ret = 0; |
| u8 ibuf[64], obuf[64]; |
| |
| if (mutex_lock_interruptible(&d->i2c_mutex) < 0) |
| return -EAGAIN; |
| |
| if (num > 2) { |
| dev_err(&d->udev->dev, |
| "too many i2c messages[%d], max 2.", num); |
| ret = -EOPNOTSUPP; |
| goto i2c_error; |
| } |
| |
| if (num == 1) { |
| if (msg[0].len > 60) { |
| dev_err(&d->udev->dev, |
| "too many i2c bytes[%d], max 60.", |
| msg[0].len); |
| ret = -EOPNOTSUPP; |
| goto i2c_error; |
| } |
| if (msg[0].flags & I2C_M_RD) { |
| /* single read */ |
| obuf[0] = 0x09; |
| obuf[1] = 0; |
| obuf[2] = msg[0].len; |
| obuf[3] = msg[0].addr; |
| ret = dvbsky_usb_generic_rw(d, obuf, 4, |
| ibuf, msg[0].len + 1); |
| if (ret) |
| dev_err(&d->udev->dev, "failed=%d\n", ret); |
| if (!ret) |
| memcpy(msg[0].buf, &ibuf[1], msg[0].len); |
| } else { |
| /* write */ |
| obuf[0] = 0x08; |
| obuf[1] = msg[0].addr; |
| obuf[2] = msg[0].len; |
| memcpy(&obuf[3], msg[0].buf, msg[0].len); |
| ret = dvbsky_usb_generic_rw(d, obuf, |
| msg[0].len + 3, ibuf, 1); |
| if (ret) |
| dev_err(&d->udev->dev, "failed=%d\n", ret); |
| } |
| } else { |
| if ((msg[0].len > 60) || (msg[1].len > 60)) { |
| dev_err(&d->udev->dev, |
| "too many i2c bytes[w-%d][r-%d], max 60.", |
| msg[0].len, msg[1].len); |
| ret = -EOPNOTSUPP; |
| goto i2c_error; |
| } |
| /* write then read */ |
| obuf[0] = 0x09; |
| obuf[1] = msg[0].len; |
| obuf[2] = msg[1].len; |
| obuf[3] = msg[0].addr; |
| memcpy(&obuf[4], msg[0].buf, msg[0].len); |
| ret = dvbsky_usb_generic_rw(d, obuf, |
| msg[0].len + 4, ibuf, msg[1].len + 1); |
| if (ret) |
| dev_err(&d->udev->dev, "failed=%d\n", ret); |
| |
| if (!ret) |
| memcpy(msg[1].buf, &ibuf[1], msg[1].len); |
| } |
| i2c_error: |
| mutex_unlock(&d->i2c_mutex); |
| return (ret) ? ret : num; |
| } |
| |
| static u32 dvbsky_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm dvbsky_i2c_algo = { |
| .master_xfer = dvbsky_i2c_xfer, |
| .functionality = dvbsky_i2c_func, |
| }; |
| |
| #if IS_ENABLED(CONFIG_RC_CORE) |
| static int dvbsky_rc_query(struct dvb_usb_device *d) |
| { |
| u32 code = 0xffff, scancode; |
| u8 rc5_command, rc5_system; |
| u8 obuf[2], ibuf[2], toggle; |
| int ret; |
| |
| obuf[0] = 0x10; |
| ret = dvbsky_usb_generic_rw(d, obuf, 1, ibuf, 2); |
| if (ret) |
| dev_err(&d->udev->dev, "failed=%d\n", ret); |
| if (ret == 0) |
| code = (ibuf[0] << 8) | ibuf[1]; |
| if (code != 0xffff) { |
| dev_dbg(&d->udev->dev, "rc code: %x\n", code); |
| rc5_command = code & 0x3F; |
| rc5_system = (code & 0x7C0) >> 6; |
| toggle = (code & 0x800) ? 1 : 0; |
| scancode = rc5_system << 8 | rc5_command; |
| rc_keydown(d->rc_dev, RC_TYPE_RC5, scancode, toggle); |
| } |
| return 0; |
| } |
| |
| static int dvbsky_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) |
| { |
| if (dvb_usb_dvbsky_disable_rc) { |
| rc->map_name = NULL; |
| return 0; |
| } |
| |
| rc->allowed_protos = RC_BIT_RC5; |
| rc->query = dvbsky_rc_query; |
| rc->interval = 300; |
| return 0; |
| } |
| #else |
| #define dvbsky_get_rc_config NULL |
| #endif |
| |
| static int dvbsky_usb_set_voltage(struct dvb_frontend *fe, |
| enum fe_sec_voltage voltage) |
| { |
| struct dvb_usb_device *d = fe_to_d(fe); |
| struct dvbsky_state *state = d_to_priv(d); |
| u8 value; |
| |
| if (voltage == SEC_VOLTAGE_OFF) |
| value = 0; |
| else |
| value = 1; |
| dvbsky_gpio_ctrl(d, 0x80, value); |
| |
| return state->fe_set_voltage(fe, voltage); |
| } |
| |
| static int dvbsky_read_mac_addr(struct dvb_usb_adapter *adap, u8 mac[6]) |
| { |
| struct dvb_usb_device *d = adap_to_d(adap); |
| u8 obuf[] = { 0x1e, 0x00 }; |
| u8 ibuf[6] = { 0 }; |
| struct i2c_msg msg[] = { |
| { |
| .addr = 0x51, |
| .flags = 0, |
| .buf = obuf, |
| .len = 2, |
| }, { |
| .addr = 0x51, |
| .flags = I2C_M_RD, |
| .buf = ibuf, |
| .len = 6, |
| } |
| }; |
| |
| if (i2c_transfer(&d->i2c_adap, msg, 2) == 2) |
| memcpy(mac, ibuf, 6); |
| |
| return 0; |
| } |
| |
| static int dvbsky_usb_read_status(struct dvb_frontend *fe, |
| enum fe_status *status) |
| { |
| struct dvb_usb_device *d = fe_to_d(fe); |
| struct dvbsky_state *state = d_to_priv(d); |
| int ret; |
| |
| ret = state->fe_read_status(fe, status); |
| |
| /* it need resync slave fifo when signal change from unlock to lock.*/ |
| if ((*status & FE_HAS_LOCK) && (!state->last_lock)) |
| dvbsky_stream_ctrl(d, 1); |
| |
| state->last_lock = (*status & FE_HAS_LOCK) ? 1 : 0; |
| return ret; |
| } |
| |
| static const struct m88ds3103_config dvbsky_s960_m88ds3103_config = { |
| .i2c_addr = 0x68, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .clock_out = 0, |
| .ts_mode = M88DS3103_TS_CI, |
| .ts_clk = 16000, |
| .ts_clk_pol = 0, |
| .agc = 0x99, |
| .lnb_hv_pol = 1, |
| .lnb_en_pol = 1, |
| }; |
| |
| static int dvbsky_s960_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvbsky_state *state = adap_to_priv(adap); |
| struct dvb_usb_device *d = adap_to_d(adap); |
| int ret = 0; |
| /* demod I2C adapter */ |
| struct i2c_adapter *i2c_adapter; |
| struct i2c_client *client; |
| struct i2c_board_info info; |
| struct ts2020_config ts2020_config = {}; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| |
| /* attach demod */ |
| adap->fe[0] = dvb_attach(m88ds3103_attach, |
| &dvbsky_s960_m88ds3103_config, |
| &d->i2c_adap, |
| &i2c_adapter); |
| if (!adap->fe[0]) { |
| dev_err(&d->udev->dev, "dvbsky_s960_attach fail.\n"); |
| ret = -ENODEV; |
| goto fail_attach; |
| } |
| |
| /* attach tuner */ |
| ts2020_config.fe = adap->fe[0]; |
| ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm; |
| strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &ts2020_config; |
| request_module("ts2020"); |
| client = i2c_new_device(i2c_adapter, &info); |
| if (client == NULL || client->dev.driver == NULL) { |
| dvb_frontend_detach(adap->fe[0]); |
| ret = -ENODEV; |
| goto fail_attach; |
| } |
| |
| if (!try_module_get(client->dev.driver->owner)) { |
| i2c_unregister_device(client); |
| dvb_frontend_detach(adap->fe[0]); |
| ret = -ENODEV; |
| goto fail_attach; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| adap->fe[0]->ops.read_signal_strength = |
| adap->fe[0]->ops.tuner_ops.get_rf_strength; |
| |
| /* hook fe: need to resync the slave fifo when signal locks. */ |
| state->fe_read_status = adap->fe[0]->ops.read_status; |
| adap->fe[0]->ops.read_status = dvbsky_usb_read_status; |
| |
| /* hook fe: LNB off/on is control by Cypress usb chip. */ |
| state->fe_set_voltage = adap->fe[0]->ops.set_voltage; |
| adap->fe[0]->ops.set_voltage = dvbsky_usb_set_voltage; |
| |
| state->i2c_client_tuner = client; |
| |
| fail_attach: |
| return ret; |
| } |
| |
| static int dvbsky_usb_ci_set_voltage(struct dvb_frontend *fe, |
| enum fe_sec_voltage voltage) |
| { |
| struct dvb_usb_device *d = fe_to_d(fe); |
| struct dvbsky_state *state = d_to_priv(d); |
| u8 value; |
| |
| if (voltage == SEC_VOLTAGE_OFF) |
| value = 0; |
| else |
| value = 1; |
| dvbsky_gpio_ctrl(d, 0x00, value); |
| |
| return state->fe_set_voltage(fe, voltage); |
| } |
| |
| static int dvbsky_ci_ctrl(void *priv, u8 read, int addr, |
| u8 data, int *mem) |
| { |
| struct dvb_usb_device *d = priv; |
| int ret = 0; |
| u8 command[4], respond[2], command_size, respond_size; |
| |
| command[1] = (u8)((addr >> 8) & 0xff); /*high part of address*/ |
| command[2] = (u8)(addr & 0xff); /*low part of address*/ |
| if (read) { |
| command[0] = 0x71; |
| command_size = 3; |
| respond_size = 2; |
| } else { |
| command[0] = 0x70; |
| command[3] = data; |
| command_size = 4; |
| respond_size = 1; |
| } |
| ret = dvbsky_usb_generic_rw(d, command, command_size, |
| respond, respond_size); |
| if (ret) |
| goto err; |
| if (read) |
| *mem = respond[1]; |
| return ret; |
| err: |
| dev_err(&d->udev->dev, "ci control failed=%d\n", ret); |
| return ret; |
| } |
| |
| static const struct m88ds3103_config dvbsky_s960c_m88ds3103_config = { |
| .i2c_addr = 0x68, |
| .clock = 27000000, |
| .i2c_wr_max = 33, |
| .clock_out = 0, |
| .ts_mode = M88DS3103_TS_CI, |
| .ts_clk = 10000, |
| .ts_clk_pol = 1, |
| .agc = 0x99, |
| .lnb_hv_pol = 0, |
| .lnb_en_pol = 1, |
| }; |
| |
| static int dvbsky_s960c_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvbsky_state *state = adap_to_priv(adap); |
| struct dvb_usb_device *d = adap_to_d(adap); |
| int ret = 0; |
| /* demod I2C adapter */ |
| struct i2c_adapter *i2c_adapter; |
| struct i2c_client *client_tuner, *client_ci; |
| struct i2c_board_info info; |
| struct sp2_config sp2_config; |
| struct ts2020_config ts2020_config = {}; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| |
| /* attach demod */ |
| adap->fe[0] = dvb_attach(m88ds3103_attach, |
| &dvbsky_s960c_m88ds3103_config, |
| &d->i2c_adap, |
| &i2c_adapter); |
| if (!adap->fe[0]) { |
| dev_err(&d->udev->dev, "dvbsky_s960ci_attach fail.\n"); |
| ret = -ENODEV; |
| goto fail_attach; |
| } |
| |
| /* attach tuner */ |
| ts2020_config.fe = adap->fe[0]; |
| ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm; |
| strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &ts2020_config; |
| request_module("ts2020"); |
| client_tuner = i2c_new_device(i2c_adapter, &info); |
| if (client_tuner == NULL || client_tuner->dev.driver == NULL) { |
| ret = -ENODEV; |
| goto fail_tuner_device; |
| } |
| |
| if (!try_module_get(client_tuner->dev.driver->owner)) { |
| ret = -ENODEV; |
| goto fail_tuner_module; |
| } |
| |
| /* attach ci controller */ |
| memset(&sp2_config, 0, sizeof(sp2_config)); |
| sp2_config.dvb_adap = &adap->dvb_adap; |
| sp2_config.priv = d; |
| sp2_config.ci_control = dvbsky_ci_ctrl; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "sp2", I2C_NAME_SIZE); |
| info.addr = 0x40; |
| info.platform_data = &sp2_config; |
| request_module("sp2"); |
| client_ci = i2c_new_device(&d->i2c_adap, &info); |
| if (client_ci == NULL || client_ci->dev.driver == NULL) { |
| ret = -ENODEV; |
| goto fail_ci_device; |
| } |
| |
| if (!try_module_get(client_ci->dev.driver->owner)) { |
| ret = -ENODEV; |
| goto fail_ci_module; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| adap->fe[0]->ops.read_signal_strength = |
| adap->fe[0]->ops.tuner_ops.get_rf_strength; |
| |
| /* hook fe: need to resync the slave fifo when signal locks. */ |
| state->fe_read_status = adap->fe[0]->ops.read_status; |
| adap->fe[0]->ops.read_status = dvbsky_usb_read_status; |
| |
| /* hook fe: LNB off/on is control by Cypress usb chip. */ |
| state->fe_set_voltage = adap->fe[0]->ops.set_voltage; |
| adap->fe[0]->ops.set_voltage = dvbsky_usb_ci_set_voltage; |
| |
| state->i2c_client_tuner = client_tuner; |
| state->i2c_client_ci = client_ci; |
| return ret; |
| fail_ci_module: |
| i2c_unregister_device(client_ci); |
| fail_ci_device: |
| module_put(client_tuner->dev.driver->owner); |
| fail_tuner_module: |
| i2c_unregister_device(client_tuner); |
| fail_tuner_device: |
| dvb_frontend_detach(adap->fe[0]); |
| fail_attach: |
| return ret; |
| } |
| |
| static int dvbsky_t680c_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvbsky_state *state = adap_to_priv(adap); |
| struct dvb_usb_device *d = adap_to_d(adap); |
| int ret = 0; |
| struct i2c_adapter *i2c_adapter; |
| struct i2c_client *client_demod, *client_tuner, *client_ci; |
| struct i2c_board_info info; |
| struct si2168_config si2168_config; |
| struct si2157_config si2157_config; |
| struct sp2_config sp2_config; |
| |
| /* attach demod */ |
| memset(&si2168_config, 0, sizeof(si2168_config)); |
| si2168_config.i2c_adapter = &i2c_adapter; |
| si2168_config.fe = &adap->fe[0]; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| info.addr = 0x64; |
| info.platform_data = &si2168_config; |
| |
| request_module(info.type); |
| client_demod = i2c_new_device(&d->i2c_adap, &info); |
| if (client_demod == NULL || |
| client_demod->dev.driver == NULL) |
| goto fail_demod_device; |
| if (!try_module_get(client_demod->dev.driver->owner)) |
| goto fail_demod_module; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = adap->fe[0]; |
| si2157_config.if_port = 1; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| |
| request_module(info.type); |
| client_tuner = i2c_new_device(i2c_adapter, &info); |
| if (client_tuner == NULL || |
| client_tuner->dev.driver == NULL) |
| goto fail_tuner_device; |
| if (!try_module_get(client_tuner->dev.driver->owner)) |
| goto fail_tuner_module; |
| |
| /* attach ci controller */ |
| memset(&sp2_config, 0, sizeof(sp2_config)); |
| sp2_config.dvb_adap = &adap->dvb_adap; |
| sp2_config.priv = d; |
| sp2_config.ci_control = dvbsky_ci_ctrl; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "sp2", I2C_NAME_SIZE); |
| info.addr = 0x40; |
| info.platform_data = &sp2_config; |
| |
| request_module(info.type); |
| client_ci = i2c_new_device(&d->i2c_adap, &info); |
| |
| if (client_ci == NULL || client_ci->dev.driver == NULL) |
| goto fail_ci_device; |
| |
| if (!try_module_get(client_ci->dev.driver->owner)) |
| goto fail_ci_module; |
| |
| state->i2c_client_demod = client_demod; |
| state->i2c_client_tuner = client_tuner; |
| state->i2c_client_ci = client_ci; |
| return ret; |
| fail_ci_module: |
| i2c_unregister_device(client_ci); |
| fail_ci_device: |
| module_put(client_tuner->dev.driver->owner); |
| fail_tuner_module: |
| i2c_unregister_device(client_tuner); |
| fail_tuner_device: |
| module_put(client_demod->dev.driver->owner); |
| fail_demod_module: |
| i2c_unregister_device(client_demod); |
| fail_demod_device: |
| ret = -ENODEV; |
| return ret; |
| } |
| |
| static int dvbsky_t330_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvbsky_state *state = adap_to_priv(adap); |
| struct dvb_usb_device *d = adap_to_d(adap); |
| int ret = 0; |
| struct i2c_adapter *i2c_adapter; |
| struct i2c_client *client_demod, *client_tuner; |
| struct i2c_board_info info; |
| struct si2168_config si2168_config; |
| struct si2157_config si2157_config; |
| |
| /* attach demod */ |
| memset(&si2168_config, 0, sizeof(si2168_config)); |
| si2168_config.i2c_adapter = &i2c_adapter; |
| si2168_config.fe = &adap->fe[0]; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| si2168_config.ts_clock_gapped = true; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| info.addr = 0x64; |
| info.platform_data = &si2168_config; |
| |
| request_module(info.type); |
| client_demod = i2c_new_device(&d->i2c_adap, &info); |
| if (client_demod == NULL || |
| client_demod->dev.driver == NULL) |
| goto fail_demod_device; |
| if (!try_module_get(client_demod->dev.driver->owner)) |
| goto fail_demod_module; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = adap->fe[0]; |
| si2157_config.if_port = 1; |
| memset(&info, 0, sizeof(struct i2c_board_info)); |
| strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| info.addr = 0x60; |
| info.platform_data = &si2157_config; |
| |
| request_module(info.type); |
| client_tuner = i2c_new_device(i2c_adapter, &info); |
| if (client_tuner == NULL || |
| client_tuner->dev.driver == NULL) |
| goto fail_tuner_device; |
| if (!try_module_get(client_tuner->dev.driver->owner)) |
| goto fail_tuner_module; |
| |
| state->i2c_client_demod = client_demod; |
| state->i2c_client_tuner = client_tuner; |
| return ret; |
| fail_tuner_module: |
| i2c_unregister_device(client_tuner); |
| fail_tuner_device: |
| module_put(client_demod->dev.driver->owner); |
| fail_demod_module: |
| i2c_unregister_device(client_demod); |
| fail_demod_device: |
| ret = -ENODEV; |
| return ret; |
| } |
| |
| static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name) |
| { |
| dvbsky_gpio_ctrl(d, 0x04, 1); |
| msleep(20); |
| dvbsky_gpio_ctrl(d, 0x83, 0); |
| dvbsky_gpio_ctrl(d, 0xc0, 1); |
| msleep(100); |
| dvbsky_gpio_ctrl(d, 0x83, 1); |
| dvbsky_gpio_ctrl(d, 0xc0, 0); |
| msleep(50); |
| |
| return WARM; |
| } |
| |
| static int dvbsky_init(struct dvb_usb_device *d) |
| { |
| struct dvbsky_state *state = d_to_priv(d); |
| |
| /* use default interface */ |
| /* |
| ret = usb_set_interface(d->udev, 0, 0); |
| if (ret) |
| return ret; |
| */ |
| mutex_init(&state->stream_mutex); |
| |
| state->last_lock = 0; |
| |
| return 0; |
| } |
| |
| static void dvbsky_exit(struct dvb_usb_device *d) |
| { |
| struct dvbsky_state *state = d_to_priv(d); |
| struct i2c_client *client; |
| |
| client = state->i2c_client_tuner; |
| /* remove I2C tuner */ |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| client = state->i2c_client_demod; |
| /* remove I2C demod */ |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| client = state->i2c_client_ci; |
| /* remove I2C ci */ |
| if (client) { |
| module_put(client->dev.driver->owner); |
| i2c_unregister_device(client); |
| } |
| } |
| |
| /* DVB USB Driver stuff */ |
| static struct dvb_usb_device_properties dvbsky_s960_props = { |
| .driver_name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .adapter_nr = adapter_nr, |
| .size_of_priv = sizeof(struct dvbsky_state), |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| .generic_bulk_ctrl_endpoint_response = 0x81, |
| .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY, |
| |
| .i2c_algo = &dvbsky_i2c_algo, |
| .frontend_attach = dvbsky_s960_attach, |
| .init = dvbsky_init, |
| .get_rc_config = dvbsky_get_rc_config, |
| .streaming_ctrl = dvbsky_streaming_ctrl, |
| .identify_state = dvbsky_identify_state, |
| .exit = dvbsky_exit, |
| .read_mac_address = dvbsky_read_mac_addr, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096), |
| } |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dvbsky_s960c_props = { |
| .driver_name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .adapter_nr = adapter_nr, |
| .size_of_priv = sizeof(struct dvbsky_state), |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| .generic_bulk_ctrl_endpoint_response = 0x81, |
| .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY, |
| |
| .i2c_algo = &dvbsky_i2c_algo, |
| .frontend_attach = dvbsky_s960c_attach, |
| .init = dvbsky_init, |
| .get_rc_config = dvbsky_get_rc_config, |
| .streaming_ctrl = dvbsky_streaming_ctrl, |
| .identify_state = dvbsky_identify_state, |
| .exit = dvbsky_exit, |
| .read_mac_address = dvbsky_read_mac_addr, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096), |
| } |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dvbsky_t680c_props = { |
| .driver_name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .adapter_nr = adapter_nr, |
| .size_of_priv = sizeof(struct dvbsky_state), |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| .generic_bulk_ctrl_endpoint_response = 0x81, |
| .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY, |
| |
| .i2c_algo = &dvbsky_i2c_algo, |
| .frontend_attach = dvbsky_t680c_attach, |
| .init = dvbsky_init, |
| .get_rc_config = dvbsky_get_rc_config, |
| .streaming_ctrl = dvbsky_streaming_ctrl, |
| .identify_state = dvbsky_identify_state, |
| .exit = dvbsky_exit, |
| .read_mac_address = dvbsky_read_mac_addr, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096), |
| } |
| } |
| }; |
| |
| static struct dvb_usb_device_properties dvbsky_t330_props = { |
| .driver_name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| .adapter_nr = adapter_nr, |
| .size_of_priv = sizeof(struct dvbsky_state), |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| .generic_bulk_ctrl_endpoint_response = 0x81, |
| .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY, |
| |
| .i2c_algo = &dvbsky_i2c_algo, |
| .frontend_attach = dvbsky_t330_attach, |
| .init = dvbsky_init, |
| .get_rc_config = dvbsky_get_rc_config, |
| .streaming_ctrl = dvbsky_streaming_ctrl, |
| .identify_state = dvbsky_identify_state, |
| .exit = dvbsky_exit, |
| .read_mac_address = dvbsky_read_mac_addr, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096), |
| } |
| } |
| }; |
| |
| static const struct usb_device_id dvbsky_id_table[] = { |
| { DVB_USB_DEVICE(0x0572, 0x6831, |
| &dvbsky_s960_props, "DVBSky S960/S860", RC_MAP_DVBSKY) }, |
| { DVB_USB_DEVICE(0x0572, 0x960c, |
| &dvbsky_s960c_props, "DVBSky S960CI", RC_MAP_DVBSKY) }, |
| { DVB_USB_DEVICE(0x0572, 0x680c, |
| &dvbsky_t680c_props, "DVBSky T680CI", RC_MAP_DVBSKY) }, |
| { DVB_USB_DEVICE(0x0572, 0x0320, |
| &dvbsky_t330_props, "DVBSky T330", RC_MAP_DVBSKY) }, |
| { DVB_USB_DEVICE(USB_VID_TECHNOTREND, |
| USB_PID_TECHNOTREND_TVSTICK_CT2_4400, |
| &dvbsky_t330_props, "TechnoTrend TVStick CT2-4400", |
| RC_MAP_TT_1500) }, |
| { DVB_USB_DEVICE(USB_VID_TECHNOTREND, |
| USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI, |
| &dvbsky_t680c_props, "TechnoTrend TT-connect CT2-4650 CI", |
| RC_MAP_TT_1500) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, dvbsky_id_table); |
| |
| static struct usb_driver dvbsky_usb_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = dvbsky_id_table, |
| .probe = dvb_usbv2_probe, |
| .disconnect = dvb_usbv2_disconnect, |
| .suspend = dvb_usbv2_suspend, |
| .resume = dvb_usbv2_resume, |
| .reset_resume = dvb_usbv2_reset_resume, |
| .no_dynamic_id = 1, |
| .soft_unbind = 1, |
| }; |
| |
| module_usb_driver(dvbsky_usb_driver); |
| |
| MODULE_AUTHOR("Max nibble <nibble.max@gmail.com>"); |
| MODULE_DESCRIPTION("Driver for DVBSky USB"); |
| MODULE_LICENSE("GPL"); |