| /* |
| * arch/arm/mach-ep93xx/clock.c |
| * Clock control for Cirrus EP93xx chips. |
| * |
| * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| */ |
| |
| #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| #include <linux/clkdev.h> |
| |
| #include <mach/hardware.h> |
| |
| #include <asm/div64.h> |
| |
| #include "soc.h" |
| |
| struct clk { |
| struct clk *parent; |
| unsigned long rate; |
| int users; |
| int sw_locked; |
| void __iomem *enable_reg; |
| u32 enable_mask; |
| |
| unsigned long (*get_rate)(struct clk *clk); |
| int (*set_rate)(struct clk *clk, unsigned long rate); |
| }; |
| |
| |
| static unsigned long get_uart_rate(struct clk *clk); |
| |
| static int set_keytchclk_rate(struct clk *clk, unsigned long rate); |
| static int set_div_rate(struct clk *clk, unsigned long rate); |
| static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate); |
| static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate); |
| |
| static struct clk clk_xtali = { |
| .rate = EP93XX_EXT_CLK_RATE, |
| }; |
| static struct clk clk_uart1 = { |
| .parent = &clk_xtali, |
| .sw_locked = 1, |
| .enable_reg = EP93XX_SYSCON_DEVCFG, |
| .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN, |
| .get_rate = get_uart_rate, |
| }; |
| static struct clk clk_uart2 = { |
| .parent = &clk_xtali, |
| .sw_locked = 1, |
| .enable_reg = EP93XX_SYSCON_DEVCFG, |
| .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN, |
| .get_rate = get_uart_rate, |
| }; |
| static struct clk clk_uart3 = { |
| .parent = &clk_xtali, |
| .sw_locked = 1, |
| .enable_reg = EP93XX_SYSCON_DEVCFG, |
| .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN, |
| .get_rate = get_uart_rate, |
| }; |
| static struct clk clk_pll1 = { |
| .parent = &clk_xtali, |
| }; |
| static struct clk clk_f = { |
| .parent = &clk_pll1, |
| }; |
| static struct clk clk_h = { |
| .parent = &clk_pll1, |
| }; |
| static struct clk clk_p = { |
| .parent = &clk_pll1, |
| }; |
| static struct clk clk_pll2 = { |
| .parent = &clk_xtali, |
| }; |
| static struct clk clk_usb_host = { |
| .parent = &clk_pll2, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN, |
| }; |
| static struct clk clk_keypad = { |
| .parent = &clk_xtali, |
| .sw_locked = 1, |
| .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV, |
| .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN, |
| .set_rate = set_keytchclk_rate, |
| }; |
| static struct clk clk_spi = { |
| .parent = &clk_xtali, |
| .rate = EP93XX_EXT_CLK_RATE, |
| }; |
| static struct clk clk_pwm = { |
| .parent = &clk_xtali, |
| .rate = EP93XX_EXT_CLK_RATE, |
| }; |
| |
| static struct clk clk_video = { |
| .sw_locked = 1, |
| .enable_reg = EP93XX_SYSCON_VIDCLKDIV, |
| .enable_mask = EP93XX_SYSCON_CLKDIV_ENABLE, |
| .set_rate = set_div_rate, |
| }; |
| |
| static struct clk clk_i2s_mclk = { |
| .sw_locked = 1, |
| .enable_reg = EP93XX_SYSCON_I2SCLKDIV, |
| .enable_mask = EP93XX_SYSCON_CLKDIV_ENABLE, |
| .set_rate = set_div_rate, |
| }; |
| |
| static struct clk clk_i2s_sclk = { |
| .sw_locked = 1, |
| .parent = &clk_i2s_mclk, |
| .enable_reg = EP93XX_SYSCON_I2SCLKDIV, |
| .enable_mask = EP93XX_SYSCON_I2SCLKDIV_SENA, |
| .set_rate = set_i2s_sclk_rate, |
| }; |
| |
| static struct clk clk_i2s_lrclk = { |
| .sw_locked = 1, |
| .parent = &clk_i2s_sclk, |
| .enable_reg = EP93XX_SYSCON_I2SCLKDIV, |
| .enable_mask = EP93XX_SYSCON_I2SCLKDIV_SENA, |
| .set_rate = set_i2s_lrclk_rate, |
| }; |
| |
| /* DMA Clocks */ |
| static struct clk clk_m2p0 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0, |
| }; |
| static struct clk clk_m2p1 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1, |
| }; |
| static struct clk clk_m2p2 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2, |
| }; |
| static struct clk clk_m2p3 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3, |
| }; |
| static struct clk clk_m2p4 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4, |
| }; |
| static struct clk clk_m2p5 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5, |
| }; |
| static struct clk clk_m2p6 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6, |
| }; |
| static struct clk clk_m2p7 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7, |
| }; |
| static struct clk clk_m2p8 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8, |
| }; |
| static struct clk clk_m2p9 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9, |
| }; |
| static struct clk clk_m2m0 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0, |
| }; |
| static struct clk clk_m2m1 = { |
| .parent = &clk_h, |
| .enable_reg = EP93XX_SYSCON_PWRCNT, |
| .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1, |
| }; |
| |
| #define INIT_CK(dev,con,ck) \ |
| { .dev_id = dev, .con_id = con, .clk = ck } |
| |
| static struct clk_lookup clocks[] = { |
| INIT_CK(NULL, "xtali", &clk_xtali), |
| INIT_CK("apb:uart1", NULL, &clk_uart1), |
| INIT_CK("apb:uart2", NULL, &clk_uart2), |
| INIT_CK("apb:uart3", NULL, &clk_uart3), |
| INIT_CK(NULL, "pll1", &clk_pll1), |
| INIT_CK(NULL, "fclk", &clk_f), |
| INIT_CK(NULL, "hclk", &clk_h), |
| INIT_CK(NULL, "apb_pclk", &clk_p), |
| INIT_CK(NULL, "pll2", &clk_pll2), |
| INIT_CK("ohci-platform", NULL, &clk_usb_host), |
| INIT_CK("ep93xx-keypad", NULL, &clk_keypad), |
| INIT_CK("ep93xx-fb", NULL, &clk_video), |
| INIT_CK("ep93xx-spi.0", NULL, &clk_spi), |
| INIT_CK("ep93xx-i2s", "mclk", &clk_i2s_mclk), |
| INIT_CK("ep93xx-i2s", "sclk", &clk_i2s_sclk), |
| INIT_CK("ep93xx-i2s", "lrclk", &clk_i2s_lrclk), |
| INIT_CK(NULL, "pwm_clk", &clk_pwm), |
| INIT_CK(NULL, "m2p0", &clk_m2p0), |
| INIT_CK(NULL, "m2p1", &clk_m2p1), |
| INIT_CK(NULL, "m2p2", &clk_m2p2), |
| INIT_CK(NULL, "m2p3", &clk_m2p3), |
| INIT_CK(NULL, "m2p4", &clk_m2p4), |
| INIT_CK(NULL, "m2p5", &clk_m2p5), |
| INIT_CK(NULL, "m2p6", &clk_m2p6), |
| INIT_CK(NULL, "m2p7", &clk_m2p7), |
| INIT_CK(NULL, "m2p8", &clk_m2p8), |
| INIT_CK(NULL, "m2p9", &clk_m2p9), |
| INIT_CK(NULL, "m2m0", &clk_m2m0), |
| INIT_CK(NULL, "m2m1", &clk_m2m1), |
| }; |
| |
| static DEFINE_SPINLOCK(clk_lock); |
| |
| static void __clk_enable(struct clk *clk) |
| { |
| if (!clk->users++) { |
| if (clk->parent) |
| __clk_enable(clk->parent); |
| |
| if (clk->enable_reg) { |
| u32 v; |
| |
| v = __raw_readl(clk->enable_reg); |
| v |= clk->enable_mask; |
| if (clk->sw_locked) |
| ep93xx_syscon_swlocked_write(v, clk->enable_reg); |
| else |
| __raw_writel(v, clk->enable_reg); |
| } |
| } |
| } |
| |
| int clk_enable(struct clk *clk) |
| { |
| unsigned long flags; |
| |
| if (!clk) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&clk_lock, flags); |
| __clk_enable(clk); |
| spin_unlock_irqrestore(&clk_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(clk_enable); |
| |
| static void __clk_disable(struct clk *clk) |
| { |
| if (!--clk->users) { |
| if (clk->enable_reg) { |
| u32 v; |
| |
| v = __raw_readl(clk->enable_reg); |
| v &= ~clk->enable_mask; |
| if (clk->sw_locked) |
| ep93xx_syscon_swlocked_write(v, clk->enable_reg); |
| else |
| __raw_writel(v, clk->enable_reg); |
| } |
| |
| if (clk->parent) |
| __clk_disable(clk->parent); |
| } |
| } |
| |
| void clk_disable(struct clk *clk) |
| { |
| unsigned long flags; |
| |
| if (!clk) |
| return; |
| |
| spin_lock_irqsave(&clk_lock, flags); |
| __clk_disable(clk); |
| spin_unlock_irqrestore(&clk_lock, flags); |
| } |
| EXPORT_SYMBOL(clk_disable); |
| |
| static unsigned long get_uart_rate(struct clk *clk) |
| { |
| unsigned long rate = clk_get_rate(clk->parent); |
| u32 value; |
| |
| value = __raw_readl(EP93XX_SYSCON_PWRCNT); |
| if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) |
| return rate; |
| else |
| return rate / 2; |
| } |
| |
| unsigned long clk_get_rate(struct clk *clk) |
| { |
| if (clk->get_rate) |
| return clk->get_rate(clk); |
| |
| return clk->rate; |
| } |
| EXPORT_SYMBOL(clk_get_rate); |
| |
| static int set_keytchclk_rate(struct clk *clk, unsigned long rate) |
| { |
| u32 val; |
| u32 div_bit; |
| |
| val = __raw_readl(clk->enable_reg); |
| |
| /* |
| * The Key Matrix and ADC clocks are configured using the same |
| * System Controller register. The clock used will be either |
| * 1/4 or 1/16 the external clock rate depending on the |
| * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV |
| * bit being set or cleared. |
| */ |
| div_bit = clk->enable_mask >> 15; |
| |
| if (rate == EP93XX_KEYTCHCLK_DIV4) |
| val |= div_bit; |
| else if (rate == EP93XX_KEYTCHCLK_DIV16) |
| val &= ~div_bit; |
| else |
| return -EINVAL; |
| |
| ep93xx_syscon_swlocked_write(val, clk->enable_reg); |
| clk->rate = rate; |
| return 0; |
| } |
| |
| static int calc_clk_div(struct clk *clk, unsigned long rate, |
| int *psel, int *esel, int *pdiv, int *div) |
| { |
| struct clk *mclk; |
| unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1; |
| int i, found = 0, __div = 0, __pdiv = 0; |
| |
| /* Don't exceed the maximum rate */ |
| max_rate = max3(clk_pll1.rate / 4, clk_pll2.rate / 4, clk_xtali.rate / 4); |
| rate = min(rate, max_rate); |
| |
| /* |
| * Try the two pll's and the external clock |
| * Because the valid predividers are 2, 2.5 and 3, we multiply |
| * all the clocks by 2 to avoid floating point math. |
| * |
| * This is based on the algorithm in the ep93xx raster guide: |
| * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf |
| * |
| */ |
| for (i = 0; i < 3; i++) { |
| if (i == 0) |
| mclk = &clk_xtali; |
| else if (i == 1) |
| mclk = &clk_pll1; |
| else |
| mclk = &clk_pll2; |
| mclk_rate = mclk->rate * 2; |
| |
| /* Try each predivider value */ |
| for (__pdiv = 4; __pdiv <= 6; __pdiv++) { |
| __div = mclk_rate / (rate * __pdiv); |
| if (__div < 2 || __div > 127) |
| continue; |
| |
| actual_rate = mclk_rate / (__pdiv * __div); |
| |
| if (!found || abs(actual_rate - rate) < rate_err) { |
| *pdiv = __pdiv - 3; |
| *div = __div; |
| *psel = (i == 2); |
| *esel = (i != 0); |
| clk->parent = mclk; |
| clk->rate = actual_rate; |
| rate_err = abs(actual_rate - rate); |
| found = 1; |
| } |
| } |
| } |
| |
| if (!found) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int set_div_rate(struct clk *clk, unsigned long rate) |
| { |
| int err, psel = 0, esel = 0, pdiv = 0, div = 0; |
| u32 val; |
| |
| err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div); |
| if (err) |
| return err; |
| |
| /* Clear the esel, psel, pdiv and div bits */ |
| val = __raw_readl(clk->enable_reg); |
| val &= ~0x7fff; |
| |
| /* Set the new esel, psel, pdiv and div bits for the new clock rate */ |
| val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) | |
| (psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) | |
| (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div; |
| ep93xx_syscon_swlocked_write(val, clk->enable_reg); |
| return 0; |
| } |
| |
| static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned val = __raw_readl(clk->enable_reg); |
| |
| if (rate == clk_i2s_mclk.rate / 2) |
| ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, |
| clk->enable_reg); |
| else if (rate == clk_i2s_mclk.rate / 4) |
| ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, |
| clk->enable_reg); |
| else |
| return -EINVAL; |
| |
| clk_i2s_sclk.rate = rate; |
| return 0; |
| } |
| |
| static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned val = __raw_readl(clk->enable_reg) & |
| ~EP93XX_I2SCLKDIV_LRDIV_MASK; |
| |
| if (rate == clk_i2s_sclk.rate / 32) |
| ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32, |
| clk->enable_reg); |
| else if (rate == clk_i2s_sclk.rate / 64) |
| ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64, |
| clk->enable_reg); |
| else if (rate == clk_i2s_sclk.rate / 128) |
| ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128, |
| clk->enable_reg); |
| else |
| return -EINVAL; |
| |
| clk_i2s_lrclk.rate = rate; |
| return 0; |
| } |
| |
| int clk_set_rate(struct clk *clk, unsigned long rate) |
| { |
| if (clk->set_rate) |
| return clk->set_rate(clk, rate); |
| |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL(clk_set_rate); |
| |
| long clk_round_rate(struct clk *clk, unsigned long rate) |
| { |
| WARN_ON(clk); |
| return 0; |
| } |
| EXPORT_SYMBOL(clk_round_rate); |
| |
| int clk_set_parent(struct clk *clk, struct clk *parent) |
| { |
| WARN_ON(clk); |
| return 0; |
| } |
| EXPORT_SYMBOL(clk_set_parent); |
| |
| struct clk *clk_get_parent(struct clk *clk) |
| { |
| return clk->parent; |
| } |
| EXPORT_SYMBOL(clk_get_parent); |
| |
| |
| static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; |
| static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; |
| static char pclk_divisors[] = { 1, 2, 4, 8 }; |
| |
| /* |
| * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS |
| */ |
| static unsigned long calc_pll_rate(u32 config_word) |
| { |
| unsigned long long rate; |
| int i; |
| |
| rate = clk_xtali.rate; |
| rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ |
| rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ |
| do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ |
| for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */ |
| rate >>= 1; |
| |
| return (unsigned long)rate; |
| } |
| |
| static void __init ep93xx_dma_clock_init(void) |
| { |
| clk_m2p0.rate = clk_h.rate; |
| clk_m2p1.rate = clk_h.rate; |
| clk_m2p2.rate = clk_h.rate; |
| clk_m2p3.rate = clk_h.rate; |
| clk_m2p4.rate = clk_h.rate; |
| clk_m2p5.rate = clk_h.rate; |
| clk_m2p6.rate = clk_h.rate; |
| clk_m2p7.rate = clk_h.rate; |
| clk_m2p8.rate = clk_h.rate; |
| clk_m2p9.rate = clk_h.rate; |
| clk_m2m0.rate = clk_h.rate; |
| clk_m2m1.rate = clk_h.rate; |
| } |
| |
| static int __init ep93xx_clock_init(void) |
| { |
| u32 value; |
| |
| /* Determine the bootloader configured pll1 rate */ |
| value = __raw_readl(EP93XX_SYSCON_CLKSET1); |
| if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1)) |
| clk_pll1.rate = clk_xtali.rate; |
| else |
| clk_pll1.rate = calc_pll_rate(value); |
| |
| /* Initialize the pll1 derived clocks */ |
| clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7]; |
| clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7]; |
| clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3]; |
| ep93xx_dma_clock_init(); |
| |
| /* Determine the bootloader configured pll2 rate */ |
| value = __raw_readl(EP93XX_SYSCON_CLKSET2); |
| if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2)) |
| clk_pll2.rate = clk_xtali.rate; |
| else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN) |
| clk_pll2.rate = calc_pll_rate(value); |
| else |
| clk_pll2.rate = 0; |
| |
| /* Initialize the pll2 derived clocks */ |
| clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1); |
| |
| /* |
| * EP93xx SSP clock rate was doubled in version E2. For more information |
| * see: |
| * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf |
| */ |
| if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) |
| clk_spi.rate /= 2; |
| |
| pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", |
| clk_pll1.rate / 1000000, clk_pll2.rate / 1000000); |
| pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", |
| clk_f.rate / 1000000, clk_h.rate / 1000000, |
| clk_p.rate / 1000000); |
| |
| clkdev_add_table(clocks, ARRAY_SIZE(clocks)); |
| return 0; |
| } |
| postcore_initcall(ep93xx_clock_init); |