| /* Various workarounds for chipset bugs. |
| This code runs very early and can't use the regular PCI subsystem |
| The entries are keyed to PCI bridges which usually identify chipsets |
| uniquely. |
| This is only for whole classes of chipsets with specific problems which |
| need early invasive action (e.g. before the timers are initialized). |
| Most PCI device specific workarounds can be done later and should be |
| in standard PCI quirks |
| Mainboard specific bugs should be handled by DMI entries. |
| CPU specific bugs in setup.c */ |
| |
| #include <linux/pci.h> |
| #include <linux/acpi.h> |
| #include <linux/pci_ids.h> |
| #include <drm/i915_drm.h> |
| #include <asm/pci-direct.h> |
| #include <asm/dma.h> |
| #include <asm/io_apic.h> |
| #include <asm/apic.h> |
| #include <asm/hpet.h> |
| #include <asm/iommu.h> |
| #include <asm/gart.h> |
| #include <asm/irq_remapping.h> |
| |
| static void __init fix_hypertransport_config(int num, int slot, int func) |
| { |
| u32 htcfg; |
| /* |
| * we found a hypertransport bus |
| * make sure that we are broadcasting |
| * interrupts to all cpus on the ht bus |
| * if we're using extended apic ids |
| */ |
| htcfg = read_pci_config(num, slot, func, 0x68); |
| if (htcfg & (1 << 18)) { |
| printk(KERN_INFO "Detected use of extended apic ids " |
| "on hypertransport bus\n"); |
| if ((htcfg & (1 << 17)) == 0) { |
| printk(KERN_INFO "Enabling hypertransport extended " |
| "apic interrupt broadcast\n"); |
| printk(KERN_INFO "Note this is a bios bug, " |
| "please contact your hw vendor\n"); |
| htcfg |= (1 << 17); |
| write_pci_config(num, slot, func, 0x68, htcfg); |
| } |
| } |
| |
| |
| } |
| |
| static void __init via_bugs(int num, int slot, int func) |
| { |
| #ifdef CONFIG_GART_IOMMU |
| if ((max_pfn > MAX_DMA32_PFN || force_iommu) && |
| !gart_iommu_aperture_allowed) { |
| printk(KERN_INFO |
| "Looks like a VIA chipset. Disabling IOMMU." |
| " Override with iommu=allowed\n"); |
| gart_iommu_aperture_disabled = 1; |
| } |
| #endif |
| } |
| |
| #ifdef CONFIG_ACPI |
| #ifdef CONFIG_X86_IO_APIC |
| |
| static int __init nvidia_hpet_check(struct acpi_table_header *header) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_X86_IO_APIC */ |
| #endif /* CONFIG_ACPI */ |
| |
| static void __init nvidia_bugs(int num, int slot, int func) |
| { |
| #ifdef CONFIG_ACPI |
| #ifdef CONFIG_X86_IO_APIC |
| /* |
| * All timer overrides on Nvidia are |
| * wrong unless HPET is enabled. |
| * Unfortunately that's not true on many Asus boards. |
| * We don't know yet how to detect this automatically, but |
| * at least allow a command line override. |
| */ |
| if (acpi_use_timer_override) |
| return; |
| |
| if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) { |
| acpi_skip_timer_override = 1; |
| printk(KERN_INFO "Nvidia board " |
| "detected. Ignoring ACPI " |
| "timer override.\n"); |
| printk(KERN_INFO "If you got timer trouble " |
| "try acpi_use_timer_override\n"); |
| } |
| #endif |
| #endif |
| /* RED-PEN skip them on mptables too? */ |
| |
| } |
| |
| #if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC) |
| static u32 __init ati_ixp4x0_rev(int num, int slot, int func) |
| { |
| u32 d; |
| u8 b; |
| |
| b = read_pci_config_byte(num, slot, func, 0xac); |
| b &= ~(1<<5); |
| write_pci_config_byte(num, slot, func, 0xac, b); |
| |
| d = read_pci_config(num, slot, func, 0x70); |
| d |= 1<<8; |
| write_pci_config(num, slot, func, 0x70, d); |
| |
| d = read_pci_config(num, slot, func, 0x8); |
| d &= 0xff; |
| return d; |
| } |
| |
| static void __init ati_bugs(int num, int slot, int func) |
| { |
| u32 d; |
| u8 b; |
| |
| if (acpi_use_timer_override) |
| return; |
| |
| d = ati_ixp4x0_rev(num, slot, func); |
| if (d < 0x82) |
| acpi_skip_timer_override = 1; |
| else { |
| /* check for IRQ0 interrupt swap */ |
| outb(0x72, 0xcd6); b = inb(0xcd7); |
| if (!(b & 0x2)) |
| acpi_skip_timer_override = 1; |
| } |
| |
| if (acpi_skip_timer_override) { |
| printk(KERN_INFO "SB4X0 revision 0x%x\n", d); |
| printk(KERN_INFO "Ignoring ACPI timer override.\n"); |
| printk(KERN_INFO "If you got timer trouble " |
| "try acpi_use_timer_override\n"); |
| } |
| } |
| |
| static u32 __init ati_sbx00_rev(int num, int slot, int func) |
| { |
| u32 d; |
| |
| d = read_pci_config(num, slot, func, 0x8); |
| d &= 0xff; |
| |
| return d; |
| } |
| |
| static void __init ati_bugs_contd(int num, int slot, int func) |
| { |
| u32 d, rev; |
| |
| rev = ati_sbx00_rev(num, slot, func); |
| if (rev >= 0x40) |
| acpi_fix_pin2_polarity = 1; |
| |
| /* |
| * SB600: revisions 0x11, 0x12, 0x13, 0x14, ... |
| * SB700: revisions 0x39, 0x3a, ... |
| * SB800: revisions 0x40, 0x41, ... |
| */ |
| if (rev >= 0x39) |
| return; |
| |
| if (acpi_use_timer_override) |
| return; |
| |
| /* check for IRQ0 interrupt swap */ |
| d = read_pci_config(num, slot, func, 0x64); |
| if (!(d & (1<<14))) |
| acpi_skip_timer_override = 1; |
| |
| if (acpi_skip_timer_override) { |
| printk(KERN_INFO "SB600 revision 0x%x\n", rev); |
| printk(KERN_INFO "Ignoring ACPI timer override.\n"); |
| printk(KERN_INFO "If you got timer trouble " |
| "try acpi_use_timer_override\n"); |
| } |
| } |
| #else |
| static void __init ati_bugs(int num, int slot, int func) |
| { |
| } |
| |
| static void __init ati_bugs_contd(int num, int slot, int func) |
| { |
| } |
| #endif |
| |
| static void __init intel_remapping_check(int num, int slot, int func) |
| { |
| u8 revision; |
| u16 device; |
| |
| device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); |
| revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID); |
| |
| /* |
| * Revision <= 13 of all triggering devices id in this quirk |
| * have a problem draining interrupts when irq remapping is |
| * enabled, and should be flagged as broken. Additionally |
| * revision 0x22 of device id 0x3405 has this problem. |
| */ |
| if (revision <= 0x13) |
| set_irq_remapping_broken(); |
| else if (device == 0x3405 && revision == 0x22) |
| set_irq_remapping_broken(); |
| } |
| |
| /* |
| * Systems with Intel graphics controllers set aside memory exclusively |
| * for gfx driver use. This memory is not marked in the E820 as reserved |
| * or as RAM, and so is subject to overlap from E820 manipulation later |
| * in the boot process. On some systems, MMIO space is allocated on top, |
| * despite the efforts of the "RAM buffer" approach, which simply rounds |
| * memory boundaries up to 64M to try to catch space that may decode |
| * as RAM and so is not suitable for MMIO. |
| * |
| * And yes, so far on current devices the base addr is always under 4G. |
| */ |
| static u32 __init intel_stolen_base(int num, int slot, int func, size_t stolen_size) |
| { |
| u32 base; |
| |
| /* |
| * For the PCI IDs in this quirk, the stolen base is always |
| * in 0x5c, aka the BDSM register (yes that's really what |
| * it's called). |
| */ |
| base = read_pci_config(num, slot, func, 0x5c); |
| base &= ~((1<<20) - 1); |
| |
| return base; |
| } |
| |
| #define KB(x) ((x) * 1024UL) |
| #define MB(x) (KB (KB (x))) |
| #define GB(x) (MB (KB (x))) |
| |
| static size_t __init i830_tseg_size(void) |
| { |
| u8 tmp = read_pci_config_byte(0, 0, 0, I830_ESMRAMC); |
| |
| if (!(tmp & TSEG_ENABLE)) |
| return 0; |
| |
| if (tmp & I830_TSEG_SIZE_1M) |
| return MB(1); |
| else |
| return KB(512); |
| } |
| |
| static size_t __init i845_tseg_size(void) |
| { |
| u8 tmp = read_pci_config_byte(0, 0, 0, I845_ESMRAMC); |
| |
| if (!(tmp & TSEG_ENABLE)) |
| return 0; |
| |
| switch (tmp & I845_TSEG_SIZE_MASK) { |
| case I845_TSEG_SIZE_512K: |
| return KB(512); |
| case I845_TSEG_SIZE_1M: |
| return MB(1); |
| default: |
| WARN_ON(1); |
| return 0; |
| } |
| } |
| |
| static size_t __init i85x_tseg_size(void) |
| { |
| u8 tmp = read_pci_config_byte(0, 0, 0, I85X_ESMRAMC); |
| |
| if (!(tmp & TSEG_ENABLE)) |
| return 0; |
| |
| return MB(1); |
| } |
| |
| static size_t __init i830_mem_size(void) |
| { |
| return read_pci_config_byte(0, 0, 0, I830_DRB3) * MB(32); |
| } |
| |
| static size_t __init i85x_mem_size(void) |
| { |
| return read_pci_config_byte(0, 0, 1, I85X_DRB3) * MB(32); |
| } |
| |
| /* |
| * On 830/845/85x the stolen memory base isn't available in any |
| * register. We need to calculate it as TOM-TSEG_SIZE-stolen_size. |
| */ |
| static u32 __init i830_stolen_base(int num, int slot, int func, size_t stolen_size) |
| { |
| return i830_mem_size() - i830_tseg_size() - stolen_size; |
| } |
| |
| static u32 __init i845_stolen_base(int num, int slot, int func, size_t stolen_size) |
| { |
| return i830_mem_size() - i845_tseg_size() - stolen_size; |
| } |
| |
| static u32 __init i85x_stolen_base(int num, int slot, int func, size_t stolen_size) |
| { |
| return i85x_mem_size() - i85x_tseg_size() - stolen_size; |
| } |
| |
| static u32 __init i865_stolen_base(int num, int slot, int func, size_t stolen_size) |
| { |
| /* |
| * FIXME is the graphics stolen memory region |
| * always at TOUD? Ie. is it always the last |
| * one to be allocated by the BIOS? |
| */ |
| return read_pci_config_16(0, 0, 0, I865_TOUD) << 16; |
| } |
| |
| static size_t __init i830_stolen_size(int num, int slot, int func) |
| { |
| size_t stolen_size; |
| u16 gmch_ctrl; |
| |
| gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL); |
| |
| switch (gmch_ctrl & I830_GMCH_GMS_MASK) { |
| case I830_GMCH_GMS_STOLEN_512: |
| stolen_size = KB(512); |
| break; |
| case I830_GMCH_GMS_STOLEN_1024: |
| stolen_size = MB(1); |
| break; |
| case I830_GMCH_GMS_STOLEN_8192: |
| stolen_size = MB(8); |
| break; |
| case I830_GMCH_GMS_LOCAL: |
| /* local memory isn't part of the normal address space */ |
| stolen_size = 0; |
| break; |
| default: |
| return 0; |
| } |
| |
| return stolen_size; |
| } |
| |
| static size_t __init gen3_stolen_size(int num, int slot, int func) |
| { |
| size_t stolen_size; |
| u16 gmch_ctrl; |
| |
| gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL); |
| |
| switch (gmch_ctrl & I855_GMCH_GMS_MASK) { |
| case I855_GMCH_GMS_STOLEN_1M: |
| stolen_size = MB(1); |
| break; |
| case I855_GMCH_GMS_STOLEN_4M: |
| stolen_size = MB(4); |
| break; |
| case I855_GMCH_GMS_STOLEN_8M: |
| stolen_size = MB(8); |
| break; |
| case I855_GMCH_GMS_STOLEN_16M: |
| stolen_size = MB(16); |
| break; |
| case I855_GMCH_GMS_STOLEN_32M: |
| stolen_size = MB(32); |
| break; |
| case I915_GMCH_GMS_STOLEN_48M: |
| stolen_size = MB(48); |
| break; |
| case I915_GMCH_GMS_STOLEN_64M: |
| stolen_size = MB(64); |
| break; |
| case G33_GMCH_GMS_STOLEN_128M: |
| stolen_size = MB(128); |
| break; |
| case G33_GMCH_GMS_STOLEN_256M: |
| stolen_size = MB(256); |
| break; |
| case INTEL_GMCH_GMS_STOLEN_96M: |
| stolen_size = MB(96); |
| break; |
| case INTEL_GMCH_GMS_STOLEN_160M: |
| stolen_size = MB(160); |
| break; |
| case INTEL_GMCH_GMS_STOLEN_224M: |
| stolen_size = MB(224); |
| break; |
| case INTEL_GMCH_GMS_STOLEN_352M: |
| stolen_size = MB(352); |
| break; |
| default: |
| stolen_size = 0; |
| break; |
| } |
| |
| return stolen_size; |
| } |
| |
| static size_t __init gen6_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gmch_ctrl >>= SNB_GMCH_GMS_SHIFT; |
| gmch_ctrl &= SNB_GMCH_GMS_MASK; |
| |
| return gmch_ctrl << 25; /* 32 MB units */ |
| } |
| |
| static size_t __init gen8_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gmch_ctrl >>= BDW_GMCH_GMS_SHIFT; |
| gmch_ctrl &= BDW_GMCH_GMS_MASK; |
| return gmch_ctrl << 25; /* 32 MB units */ |
| } |
| |
| static size_t __init chv_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gmch_ctrl >>= SNB_GMCH_GMS_SHIFT; |
| gmch_ctrl &= SNB_GMCH_GMS_MASK; |
| |
| /* |
| * 0x0 to 0x10: 32MB increments starting at 0MB |
| * 0x11 to 0x16: 4MB increments starting at 8MB |
| * 0x17 to 0x1d: 4MB increments start at 36MB |
| */ |
| if (gmch_ctrl < 0x11) |
| return gmch_ctrl << 25; |
| else if (gmch_ctrl < 0x17) |
| return (gmch_ctrl - 0x11 + 2) << 22; |
| else |
| return (gmch_ctrl - 0x17 + 9) << 22; |
| } |
| |
| struct intel_stolen_funcs { |
| size_t (*size)(int num, int slot, int func); |
| u32 (*base)(int num, int slot, int func, size_t size); |
| }; |
| |
| static size_t __init gen9_stolen_size(int num, int slot, int func) |
| { |
| u16 gmch_ctrl; |
| |
| gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL); |
| gmch_ctrl >>= BDW_GMCH_GMS_SHIFT; |
| gmch_ctrl &= BDW_GMCH_GMS_MASK; |
| |
| if (gmch_ctrl < 0xf0) |
| return gmch_ctrl << 25; /* 32 MB units */ |
| else |
| /* 4MB increments starting at 0xf0 for 4MB */ |
| return (gmch_ctrl - 0xf0 + 1) << 22; |
| } |
| |
| typedef size_t (*stolen_size_fn)(int num, int slot, int func); |
| |
| static const struct intel_stolen_funcs i830_stolen_funcs __initconst = { |
| .base = i830_stolen_base, |
| .size = i830_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs i845_stolen_funcs __initconst = { |
| .base = i845_stolen_base, |
| .size = i830_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs i85x_stolen_funcs __initconst = { |
| .base = i85x_stolen_base, |
| .size = gen3_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs i865_stolen_funcs __initconst = { |
| .base = i865_stolen_base, |
| .size = gen3_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs gen3_stolen_funcs __initconst = { |
| .base = intel_stolen_base, |
| .size = gen3_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs gen6_stolen_funcs __initconst = { |
| .base = intel_stolen_base, |
| .size = gen6_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs gen8_stolen_funcs __initconst = { |
| .base = intel_stolen_base, |
| .size = gen8_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs gen9_stolen_funcs __initconst = { |
| .base = intel_stolen_base, |
| .size = gen9_stolen_size, |
| }; |
| |
| static const struct intel_stolen_funcs chv_stolen_funcs __initconst = { |
| .base = intel_stolen_base, |
| .size = chv_stolen_size, |
| }; |
| |
| static const struct pci_device_id intel_stolen_ids[] __initconst = { |
| INTEL_I830_IDS(&i830_stolen_funcs), |
| INTEL_I845G_IDS(&i845_stolen_funcs), |
| INTEL_I85X_IDS(&i85x_stolen_funcs), |
| INTEL_I865G_IDS(&i865_stolen_funcs), |
| INTEL_I915G_IDS(&gen3_stolen_funcs), |
| INTEL_I915GM_IDS(&gen3_stolen_funcs), |
| INTEL_I945G_IDS(&gen3_stolen_funcs), |
| INTEL_I945GM_IDS(&gen3_stolen_funcs), |
| INTEL_VLV_M_IDS(&gen6_stolen_funcs), |
| INTEL_VLV_D_IDS(&gen6_stolen_funcs), |
| INTEL_PINEVIEW_IDS(&gen3_stolen_funcs), |
| INTEL_I965G_IDS(&gen3_stolen_funcs), |
| INTEL_G33_IDS(&gen3_stolen_funcs), |
| INTEL_I965GM_IDS(&gen3_stolen_funcs), |
| INTEL_GM45_IDS(&gen3_stolen_funcs), |
| INTEL_G45_IDS(&gen3_stolen_funcs), |
| INTEL_IRONLAKE_D_IDS(&gen3_stolen_funcs), |
| INTEL_IRONLAKE_M_IDS(&gen3_stolen_funcs), |
| INTEL_SNB_D_IDS(&gen6_stolen_funcs), |
| INTEL_SNB_M_IDS(&gen6_stolen_funcs), |
| INTEL_IVB_M_IDS(&gen6_stolen_funcs), |
| INTEL_IVB_D_IDS(&gen6_stolen_funcs), |
| INTEL_HSW_D_IDS(&gen6_stolen_funcs), |
| INTEL_HSW_M_IDS(&gen6_stolen_funcs), |
| INTEL_BDW_M_IDS(&gen8_stolen_funcs), |
| INTEL_BDW_D_IDS(&gen8_stolen_funcs), |
| INTEL_CHV_IDS(&chv_stolen_funcs), |
| INTEL_SKL_IDS(&gen9_stolen_funcs), |
| }; |
| |
| static void __init intel_graphics_stolen(int num, int slot, int func) |
| { |
| size_t size; |
| int i; |
| u32 start; |
| u16 device, subvendor, subdevice; |
| |
| device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); |
| subvendor = read_pci_config_16(num, slot, func, |
| PCI_SUBSYSTEM_VENDOR_ID); |
| subdevice = read_pci_config_16(num, slot, func, PCI_SUBSYSTEM_ID); |
| |
| for (i = 0; i < ARRAY_SIZE(intel_stolen_ids); i++) { |
| if (intel_stolen_ids[i].device == device) { |
| const struct intel_stolen_funcs *stolen_funcs = |
| (const struct intel_stolen_funcs *)intel_stolen_ids[i].driver_data; |
| size = stolen_funcs->size(num, slot, func); |
| start = stolen_funcs->base(num, slot, func, size); |
| if (size && start) { |
| printk(KERN_INFO "Reserving Intel graphics stolen memory at 0x%x-0x%x\n", |
| start, start + (u32)size - 1); |
| /* Mark this space as reserved */ |
| e820_add_region(start, size, E820_RESERVED); |
| sanitize_e820_map(e820.map, |
| ARRAY_SIZE(e820.map), |
| &e820.nr_map); |
| } |
| return; |
| } |
| } |
| } |
| |
| static void __init force_disable_hpet(int num, int slot, int func) |
| { |
| #ifdef CONFIG_HPET_TIMER |
| boot_hpet_disable = 1; |
| pr_info("x86/hpet: Will disable the HPET for this platform because it's not reliable\n"); |
| #endif |
| } |
| |
| |
| #define QFLAG_APPLY_ONCE 0x1 |
| #define QFLAG_APPLIED 0x2 |
| #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) |
| struct chipset { |
| u32 vendor; |
| u32 device; |
| u32 class; |
| u32 class_mask; |
| u32 flags; |
| void (*f)(int num, int slot, int func); |
| }; |
| |
| /* |
| * Only works for devices on the root bus. If you add any devices |
| * not on bus 0 readd another loop level in early_quirks(). But |
| * be careful because at least the Nvidia quirk here relies on |
| * only matching on bus 0. |
| */ |
| static struct chipset early_qrk[] __initdata = { |
| { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, |
| { PCI_VENDOR_ID_VIA, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, |
| { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, |
| PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, |
| { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, |
| PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, |
| { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, |
| PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd }, |
| { PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST, |
| PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check }, |
| { PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST, |
| PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check }, |
| { PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST, |
| PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check }, |
| { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, PCI_ANY_ID, |
| QFLAG_APPLY_ONCE, intel_graphics_stolen }, |
| /* |
| * HPET on the current version of the Baytrail platform has accuracy |
| * problems: it will halt in deep idle state - so we disable it. |
| * |
| * More details can be found in section 18.10.1.3 of the datasheet: |
| * |
| * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z8000-datasheet-vol-1.pdf |
| */ |
| { PCI_VENDOR_ID_INTEL, 0x0f00, |
| PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet}, |
| {} |
| }; |
| |
| /** |
| * check_dev_quirk - apply early quirks to a given PCI device |
| * @num: bus number |
| * @slot: slot number |
| * @func: PCI function |
| * |
| * Check the vendor & device ID against the early quirks table. |
| * |
| * If the device is single function, let early_quirks() know so we don't |
| * poke at this device again. |
| */ |
| static int __init check_dev_quirk(int num, int slot, int func) |
| { |
| u16 class; |
| u16 vendor; |
| u16 device; |
| u8 type; |
| int i; |
| |
| class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE); |
| |
| if (class == 0xffff) |
| return -1; /* no class, treat as single function */ |
| |
| vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID); |
| |
| device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID); |
| |
| for (i = 0; early_qrk[i].f != NULL; i++) { |
| if (((early_qrk[i].vendor == PCI_ANY_ID) || |
| (early_qrk[i].vendor == vendor)) && |
| ((early_qrk[i].device == PCI_ANY_ID) || |
| (early_qrk[i].device == device)) && |
| (!((early_qrk[i].class ^ class) & |
| early_qrk[i].class_mask))) { |
| if ((early_qrk[i].flags & |
| QFLAG_DONE) != QFLAG_DONE) |
| early_qrk[i].f(num, slot, func); |
| early_qrk[i].flags |= QFLAG_APPLIED; |
| } |
| } |
| |
| type = read_pci_config_byte(num, slot, func, |
| PCI_HEADER_TYPE); |
| if (!(type & 0x80)) |
| return -1; |
| |
| return 0; |
| } |
| |
| void __init early_quirks(void) |
| { |
| int slot, func; |
| |
| if (!early_pci_allowed()) |
| return; |
| |
| /* Poor man's PCI discovery */ |
| /* Only scan the root bus */ |
| for (slot = 0; slot < 32; slot++) |
| for (func = 0; func < 8; func++) { |
| /* Only probe function 0 on single fn devices */ |
| if (check_dev_quirk(0, slot, func)) |
| break; |
| } |
| } |