| /* |
| * MPC8360E EMDS Device Tree Source |
| * |
| * Copyright 2006 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| |
| /* |
| /memreserve/ 00000000 1000000; |
| */ |
| |
| / { |
| model = "MPC8360EPB"; |
| compatible = "MPC83xx"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| linux,phandle = <100>; |
| |
| cpus { |
| #cpus = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| linux,phandle = <200>; |
| |
| PowerPC,8360@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <20>; // 32 bytes |
| i-cache-line-size = <20>; // 32 bytes |
| d-cache-size = <8000>; // L1, 32K |
| i-cache-size = <8000>; // L1, 32K |
| timebase-frequency = <3EF1480>; |
| bus-frequency = <FBC5200>; |
| clock-frequency = <1F78A400>; |
| 32-bit; |
| linux,phandle = <201>; |
| linux,boot-cpu; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| linux,phandle = <300>; |
| reg = <00000000 10000000>; |
| }; |
| |
| bcsr@f8000000 { |
| device_type = "board-control"; |
| reg = <f8000000 8000>; |
| }; |
| |
| soc8360@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <2>; |
| device_type = "soc"; |
| ranges = <0 e0000000 00100000>; |
| reg = <e0000000 00000200>; |
| bus-frequency = <FBC5200>; |
| |
| wdt@200 { |
| device_type = "watchdog"; |
| compatible = "mpc83xx_wdt"; |
| reg = <200 100>; |
| }; |
| |
| i2c@3000 { |
| device_type = "i2c"; |
| compatible = "fsl-i2c"; |
| reg = <3000 100>; |
| interrupts = <e 8>; |
| interrupt-parent = <700>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| device_type = "i2c"; |
| compatible = "fsl-i2c"; |
| reg = <3100 100>; |
| interrupts = <f 8>; |
| interrupt-parent = <700>; |
| dfsrr; |
| }; |
| |
| serial@4500 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4500 100>; |
| clock-frequency = <FBC5200>; |
| interrupts = <9 8>; |
| interrupt-parent = <700>; |
| }; |
| |
| serial@4600 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4600 100>; |
| clock-frequency = <FBC5200>; |
| interrupts = <a 8>; |
| interrupt-parent = <700>; |
| }; |
| |
| crypto@30000 { |
| device_type = "crypto"; |
| model = "SEC2"; |
| compatible = "talitos"; |
| reg = <30000 10000>; |
| interrupts = <b 8>; |
| interrupt-parent = <700>; |
| num-channels = <4>; |
| channel-fifo-len = <18>; |
| exec-units-mask = <0000007e>; |
| /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ |
| descriptor-types-mask = <01010ebf>; |
| }; |
| |
| pci@8500 { |
| linux,phandle = <8500>; |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x11 AD17 */ |
| 8800 0 0 1 700 14 8 |
| 8800 0 0 2 700 15 8 |
| 8800 0 0 3 700 16 8 |
| 8800 0 0 4 700 17 8 |
| |
| /* IDSEL 0x12 AD18 */ |
| 9000 0 0 1 700 16 8 |
| 9000 0 0 2 700 17 8 |
| 9000 0 0 3 700 14 8 |
| 9000 0 0 4 700 15 8 |
| |
| /* IDSEL 0x13 AD19 */ |
| 9800 0 0 1 700 17 8 |
| 9800 0 0 2 700 14 8 |
| 9800 0 0 3 700 15 8 |
| 9800 0 0 4 700 16 8 |
| |
| /* IDSEL 0x15 AD21*/ |
| a800 0 0 1 700 14 8 |
| a800 0 0 2 700 15 8 |
| a800 0 0 3 700 16 8 |
| a800 0 0 4 700 17 8 |
| |
| /* IDSEL 0x16 AD22*/ |
| b000 0 0 1 700 17 8 |
| b000 0 0 2 700 14 8 |
| b000 0 0 3 700 15 8 |
| b000 0 0 4 700 16 8 |
| |
| /* IDSEL 0x17 AD23*/ |
| b800 0 0 1 700 16 8 |
| b800 0 0 2 700 17 8 |
| b800 0 0 3 700 14 8 |
| b800 0 0 4 700 15 8 |
| |
| /* IDSEL 0x18 AD24*/ |
| c000 0 0 1 700 15 8 |
| c000 0 0 2 700 16 8 |
| c000 0 0 3 700 17 8 |
| c000 0 0 4 700 14 8>; |
| interrupt-parent = <700>; |
| interrupts = <42 8>; |
| bus-range = <0 0>; |
| ranges = <02000000 0 a0000000 a0000000 0 10000000 |
| 42000000 0 80000000 80000000 0 10000000 |
| 01000000 0 00000000 e2000000 0 00100000>; |
| clock-frequency = <3f940aa>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <8500 100>; |
| compatible = "83xx"; |
| device_type = "pci"; |
| }; |
| |
| pic@700 { |
| linux,phandle = <700>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <700 100>; |
| built-in; |
| device_type = "ipic"; |
| }; |
| |
| par_io@1400 { |
| reg = <1400 100>; |
| device_type = "par_io"; |
| num-ports = <7>; |
| |
| ucc_pin@01 { |
| linux,phandle = <140001>; |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 3 1 0 1 0 /* TxD0 */ |
| 0 4 1 0 1 0 /* TxD1 */ |
| 0 5 1 0 1 0 /* TxD2 */ |
| 0 6 1 0 1 0 /* TxD3 */ |
| 1 6 1 0 3 0 /* TxD4 */ |
| 1 7 1 0 1 0 /* TxD5 */ |
| 1 9 1 0 2 0 /* TxD6 */ |
| 1 a 1 0 2 0 /* TxD7 */ |
| 0 9 2 0 1 0 /* RxD0 */ |
| 0 a 2 0 1 0 /* RxD1 */ |
| 0 b 2 0 1 0 /* RxD2 */ |
| 0 c 2 0 1 0 /* RxD3 */ |
| 0 d 2 0 1 0 /* RxD4 */ |
| 1 1 2 0 2 0 /* RxD5 */ |
| 1 0 2 0 2 0 /* RxD6 */ |
| 1 4 2 0 2 0 /* RxD7 */ |
| 0 7 1 0 1 0 /* TX_EN */ |
| 0 8 1 0 1 0 /* TX_ER */ |
| 0 f 2 0 1 0 /* RX_DV */ |
| 0 10 2 0 1 0 /* RX_ER */ |
| 0 0 2 0 1 0 /* RX_CLK */ |
| 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ |
| 2 8 2 0 1 0>; /* GTX125 - CLK9 */ |
| }; |
| ucc_pin@02 { |
| linux,phandle = <140002>; |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0 11 1 0 1 0 /* TxD0 */ |
| 0 12 1 0 1 0 /* TxD1 */ |
| 0 13 1 0 1 0 /* TxD2 */ |
| 0 14 1 0 1 0 /* TxD3 */ |
| 1 2 1 0 1 0 /* TxD4 */ |
| 1 3 1 0 2 0 /* TxD5 */ |
| 1 5 1 0 3 0 /* TxD6 */ |
| 1 8 1 0 3 0 /* TxD7 */ |
| 0 17 2 0 1 0 /* RxD0 */ |
| 0 18 2 0 1 0 /* RxD1 */ |
| 0 19 2 0 1 0 /* RxD2 */ |
| 0 1a 2 0 1 0 /* RxD3 */ |
| 0 1b 2 0 1 0 /* RxD4 */ |
| 1 c 2 0 2 0 /* RxD5 */ |
| 1 d 2 0 3 0 /* RxD6 */ |
| 1 b 2 0 2 0 /* RxD7 */ |
| 0 15 1 0 1 0 /* TX_EN */ |
| 0 16 1 0 1 0 /* TX_ER */ |
| 0 1d 2 0 1 0 /* RX_DV */ |
| 0 1e 2 0 1 0 /* RX_ER */ |
| 0 1f 2 0 1 0 /* RX_CLK */ |
| 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ |
| 2 3 2 0 1 0 /* GTX125 - CLK4 */ |
| 0 1 3 0 2 0 /* MDIO */ |
| 0 2 1 0 1 0>; /* MDC */ |
| }; |
| |
| }; |
| }; |
| |
| qe@e0100000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "qe"; |
| model = "QE"; |
| ranges = <0 e0100000 00100000>; |
| reg = <e0100000 480>; |
| brg-frequency = <0>; |
| bus-frequency = <179A7B00>; |
| |
| muram@10000 { |
| device_type = "muram"; |
| ranges = <0 00010000 0000c000>; |
| |
| data-only@0{ |
| reg = <0 c000>; |
| }; |
| }; |
| |
| spi@4c0 { |
| device_type = "spi"; |
| compatible = "fsl_spi"; |
| reg = <4c0 40>; |
| interrupts = <2>; |
| interrupt-parent = <80>; |
| mode = "cpu"; |
| }; |
| |
| spi@500 { |
| device_type = "spi"; |
| compatible = "fsl_spi"; |
| reg = <500 40>; |
| interrupts = <1>; |
| interrupt-parent = <80>; |
| mode = "cpu"; |
| }; |
| |
| usb@6c0 { |
| device_type = "usb"; |
| compatible = "qe_udc"; |
| reg = <6c0 40 8B00 100>; |
| interrupts = <b>; |
| interrupt-parent = <80>; |
| mode = "slave"; |
| }; |
| |
| ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| model = "UCC"; |
| device-id = <1>; |
| reg = <2000 200>; |
| interrupts = <20>; |
| interrupt-parent = <80>; |
| mac-address = [ 00 04 9f 00 23 23 ]; |
| rx-clock = <0>; |
| tx-clock = <19>; |
| phy-handle = <212000>; |
| pio-handle = <140001>; |
| }; |
| |
| ucc@3000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| model = "UCC"; |
| device-id = <2>; |
| reg = <3000 200>; |
| interrupts = <21>; |
| interrupt-parent = <80>; |
| mac-address = [ 00 11 22 33 44 55 ]; |
| rx-clock = <0>; |
| tx-clock = <14>; |
| phy-handle = <212001>; |
| pio-handle = <140002>; |
| }; |
| |
| mdio@2120 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2120 18>; |
| device_type = "mdio"; |
| compatible = "ucc_geth_phy"; |
| |
| ethernet-phy@00 { |
| linux,phandle = <212000>; |
| interrupt-parent = <700>; |
| interrupts = <11 2>; |
| reg = <0>; |
| device_type = "ethernet-phy"; |
| interface = <6>; //ENET_1000_GMII |
| }; |
| ethernet-phy@01 { |
| linux,phandle = <212001>; |
| interrupt-parent = <700>; |
| interrupts = <12 2>; |
| reg = <1>; |
| device_type = "ethernet-phy"; |
| interface = <6>; |
| }; |
| }; |
| |
| qeic@80 { |
| linux,phandle = <80>; |
| interrupt-controller; |
| device_type = "qeic"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <80 80>; |
| built-in; |
| big-endian; |
| interrupts = <20 8 21 8>; //high:32 low:33 |
| interrupt-parent = <700>; |
| }; |
| |
| }; |
| }; |