| /* |
| * MPC8272 ADS Device Tree Source |
| * |
| * Copyright 2005 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| / { |
| model = "MPC8272ADS"; |
| compatible = "MPC8260ADS"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| linux,phandle = <100>; |
| |
| cpus { |
| #cpus = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| linux,phandle = <200>; |
| |
| PowerPC,8272@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <20>; // 32 bytes |
| i-cache-line-size = <20>; // 32 bytes |
| d-cache-size = <4000>; // L1, 16K |
| i-cache-size = <4000>; // L1, 16K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| 32-bit; |
| linux,phandle = <201>; |
| linux,boot-cpu; |
| }; |
| }; |
| |
| interrupt-controller@f8200000 { |
| linux,phandle = <f8200000>; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| reg = <f8200000 f8200004>; |
| built-in; |
| device_type = "pci-pic"; |
| }; |
| memory { |
| device_type = "memory"; |
| linux,phandle = <300>; |
| reg = <00000000 4000000 f4500000 00000020>; |
| }; |
| |
| chosen { |
| name = "chosen"; |
| linux,platform = <0>; |
| interrupt-controller = <10c00>; |
| linux,phandle = <400>; |
| }; |
| |
| soc8272@f0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <2>; |
| device_type = "soc"; |
| ranges = <00000000 f0000000 00053000>; |
| reg = <f0000000 10000>; |
| |
| mdio@0 { |
| device_type = "mdio"; |
| compatible = "fs_enet"; |
| reg = <0 0>; |
| linux,phandle = <24520>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| ethernet-phy@0 { |
| linux,phandle = <2452000>; |
| interrupt-parent = <10c00>; |
| interrupts = <17 4>; |
| reg = <0>; |
| bitbang = [ 12 12 13 02 02 01 ]; |
| device_type = "ethernet-phy"; |
| }; |
| ethernet-phy@1 { |
| linux,phandle = <2452001>; |
| interrupt-parent = <10c00>; |
| interrupts = <17 4>; |
| bitbang = [ 12 12 13 02 02 01 ]; |
| reg = <3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| ethernet@24000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| device_type = "network"; |
| device-id = <1>; |
| compatible = "fs_enet"; |
| model = "FCC"; |
| reg = <11300 20 8400 100 11380 30>; |
| mac-address = [ 00 11 2F 99 43 54 ]; |
| interrupts = <20 2>; |
| interrupt-parent = <10c00>; |
| phy-handle = <2452000>; |
| rx-clock = <13>; |
| tx-clock = <12>; |
| }; |
| |
| ethernet@25000 { |
| device_type = "network"; |
| device-id = <2>; |
| compatible = "fs_enet"; |
| model = "FCC"; |
| reg = <11320 20 8500 100 113b0 30>; |
| mac-address = [ 00 11 2F 99 44 54 ]; |
| interrupts = <21 2>; |
| interrupt-parent = <10c00>; |
| phy-handle = <2452001>; |
| rx-clock = <17>; |
| tx-clock = <18>; |
| }; |
| |
| cpm@f0000000 { |
| linux,phandle = <f0000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <2>; |
| device_type = "cpm"; |
| model = "CPM2"; |
| ranges = <00000000 00000000 20000>; |
| reg = <0 20000>; |
| command-proc = <119c0>; |
| brg-frequency = <17D7840>; |
| cpm_clk = <BEBC200>; |
| |
| scc@11a00 { |
| device_type = "serial"; |
| compatible = "cpm_uart"; |
| model = "SCC"; |
| device-id = <1>; |
| reg = <11a00 20 8000 100>; |
| current-speed = <1c200>; |
| interrupts = <28 2>; |
| interrupt-parent = <10c00>; |
| clock-setup = <0 00ffffff>; |
| rx-clock = <1>; |
| tx-clock = <1>; |
| }; |
| |
| scc@11a60 { |
| device_type = "serial"; |
| compatible = "cpm_uart"; |
| model = "SCC"; |
| device-id = <4>; |
| reg = <11a60 20 8300 100>; |
| current-speed = <1c200>; |
| interrupts = <2b 2>; |
| interrupt-parent = <10c00>; |
| clock-setup = <1b ffffff00>; |
| rx-clock = <4>; |
| tx-clock = <4>; |
| }; |
| |
| }; |
| interrupt-controller@10c00 { |
| linux,phandle = <10c00>; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| reg = <10c00 80>; |
| built-in; |
| device_type = "cpm-pic"; |
| compatible = "CPM2"; |
| }; |
| pci@0500 { |
| linux,phandle = <0500>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| compatible = "8272"; |
| device_type = "pci"; |
| reg = <10430 4dc>; |
| clock-frequency = <3f940aa>; |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x16 */ |
| b000 0 0 1 f8200000 40 8 |
| b000 0 0 2 f8200000 41 8 |
| b000 0 0 3 f8200000 42 8 |
| b000 0 0 4 f8200000 43 8 |
| |
| /* IDSEL 0x17 */ |
| b800 0 0 1 f8200000 43 8 |
| b800 0 0 2 f8200000 40 8 |
| b800 0 0 3 f8200000 41 8 |
| b800 0 0 4 f8200000 42 8 |
| |
| /* IDSEL 0x18 */ |
| c000 0 0 1 f8200000 42 8 |
| c000 0 0 2 f8200000 43 8 |
| c000 0 0 3 f8200000 40 8 |
| c000 0 0 4 f8200000 41 8>; |
| interrupt-parent = <10c00>; |
| interrupts = <14 8>; |
| bus-range = <0 0>; |
| ranges = <02000000 0 80000000 80000000 0 40000000 |
| 01000000 0 00000000 f6000000 0 02000000>; |
| }; |
| |
| /* May need to remove if on a part without crypto engine */ |
| crypto@30000 { |
| device_type = "crypto"; |
| model = "SEC2"; |
| compatible = "talitos"; |
| reg = <30000 10000>; |
| interrupts = <b 2>; |
| interrupt-parent = <10c00>; |
| num-channels = <4>; |
| channel-fifo-len = <18>; |
| exec-units-mask = <0000007e>; |
| /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ |
| descriptor-types-mask = <01010ebf>; |
| }; |
| |
| }; |
| }; |