| /* |
| * Copyright © 2006-2010 Intel Corporation |
| * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * Dave Airlie <airlied@linux.ie> |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * Chris Wilson <chris@chris-wilson.co.uk> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/moduleparam.h> |
| #include "intel_drv.h" |
| |
| #define PCI_LBPC 0xf4 /* legacy/combination backlight modes */ |
| |
| void |
| intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| adjusted_mode->hdisplay = fixed_mode->hdisplay; |
| adjusted_mode->hsync_start = fixed_mode->hsync_start; |
| adjusted_mode->hsync_end = fixed_mode->hsync_end; |
| adjusted_mode->htotal = fixed_mode->htotal; |
| |
| adjusted_mode->vdisplay = fixed_mode->vdisplay; |
| adjusted_mode->vsync_start = fixed_mode->vsync_start; |
| adjusted_mode->vsync_end = fixed_mode->vsync_end; |
| adjusted_mode->vtotal = fixed_mode->vtotal; |
| |
| adjusted_mode->clock = fixed_mode->clock; |
| } |
| |
| /* adjusted_mode has been preset to be the panel's fixed mode */ |
| void |
| intel_pch_panel_fitting(struct drm_device *dev, |
| int fitting_mode, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int x, y, width, height; |
| |
| x = y = width = height = 0; |
| |
| /* Native modes don't need fitting */ |
| if (adjusted_mode->hdisplay == mode->hdisplay && |
| adjusted_mode->vdisplay == mode->vdisplay) |
| goto done; |
| |
| switch (fitting_mode) { |
| case DRM_MODE_SCALE_CENTER: |
| width = mode->hdisplay; |
| height = mode->vdisplay; |
| x = (adjusted_mode->hdisplay - width + 1)/2; |
| y = (adjusted_mode->vdisplay - height + 1)/2; |
| break; |
| |
| case DRM_MODE_SCALE_ASPECT: |
| /* Scale but preserve the aspect ratio */ |
| { |
| u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay; |
| u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay; |
| if (scaled_width > scaled_height) { /* pillar */ |
| width = scaled_height / mode->vdisplay; |
| if (width & 1) |
| width++; |
| x = (adjusted_mode->hdisplay - width + 1) / 2; |
| y = 0; |
| height = adjusted_mode->vdisplay; |
| } else if (scaled_width < scaled_height) { /* letter */ |
| height = scaled_width / mode->hdisplay; |
| if (height & 1) |
| height++; |
| y = (adjusted_mode->vdisplay - height + 1) / 2; |
| x = 0; |
| width = adjusted_mode->hdisplay; |
| } else { |
| x = y = 0; |
| width = adjusted_mode->hdisplay; |
| height = adjusted_mode->vdisplay; |
| } |
| } |
| break; |
| |
| default: |
| case DRM_MODE_SCALE_FULLSCREEN: |
| x = y = 0; |
| width = adjusted_mode->hdisplay; |
| height = adjusted_mode->vdisplay; |
| break; |
| } |
| |
| done: |
| dev_priv->pch_pf_pos = (x << 16) | y; |
| dev_priv->pch_pf_size = (width << 16) | height; |
| } |
| |
| static int is_backlight_combination_mode(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (INTEL_INFO(dev)->gen >= 4) |
| return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE; |
| |
| if (IS_GEN2(dev)) |
| return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE; |
| |
| return 0; |
| } |
| |
| static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv) |
| { |
| u32 val; |
| |
| /* Restore the CTL value if it lost, e.g. GPU reset */ |
| |
| if (HAS_PCH_SPLIT(dev_priv->dev)) { |
| val = I915_READ(BLC_PWM_PCH_CTL2); |
| if (dev_priv->saveBLC_PWM_CTL2 == 0) { |
| dev_priv->saveBLC_PWM_CTL2 = val; |
| } else if (val == 0) { |
| I915_WRITE(BLC_PWM_PCH_CTL2, |
| dev_priv->saveBLC_PWM_CTL2); |
| val = dev_priv->saveBLC_PWM_CTL2; |
| } |
| } else { |
| val = I915_READ(BLC_PWM_CTL); |
| if (dev_priv->saveBLC_PWM_CTL == 0) { |
| dev_priv->saveBLC_PWM_CTL = val; |
| dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); |
| } else if (val == 0) { |
| I915_WRITE(BLC_PWM_CTL, |
| dev_priv->saveBLC_PWM_CTL); |
| I915_WRITE(BLC_PWM_CTL2, |
| dev_priv->saveBLC_PWM_CTL2); |
| val = dev_priv->saveBLC_PWM_CTL; |
| } |
| } |
| |
| return val; |
| } |
| |
| static u32 _intel_panel_get_max_backlight(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 max; |
| |
| max = i915_read_blc_pwm_ctl(dev_priv); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| max >>= 16; |
| } else { |
| if (INTEL_INFO(dev)->gen < 4) |
| max >>= 17; |
| else |
| max >>= 16; |
| |
| if (is_backlight_combination_mode(dev)) |
| max *= 0xff; |
| } |
| |
| return max; |
| } |
| |
| u32 intel_panel_get_max_backlight(struct drm_device *dev) |
| { |
| u32 max; |
| |
| max = _intel_panel_get_max_backlight(dev); |
| if (max == 0) { |
| /* XXX add code here to query mode clock or hardware clock |
| * and program max PWM appropriately. |
| */ |
| pr_warn_once("fixme: max PWM is zero\n"); |
| return 1; |
| } |
| |
| DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max); |
| return max; |
| } |
| |
| static int i915_panel_invert_brightness; |
| MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness " |
| "(-1 force normal, 0 machine defaults, 1 force inversion), please " |
| "report PCI device ID, subsystem vendor and subsystem device ID " |
| "to dri-devel@lists.freedesktop.org, if your machine needs it. " |
| "It will then be included in an upcoming module version."); |
| module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600); |
| static u32 intel_panel_compute_brightness(struct drm_device *dev, u32 val) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (i915_panel_invert_brightness < 0) |
| return val; |
| |
| if (i915_panel_invert_brightness > 0 || |
| dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) |
| return intel_panel_get_max_backlight(dev) - val; |
| |
| return val; |
| } |
| |
| static u32 intel_panel_get_backlight(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 val; |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; |
| } else { |
| val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; |
| if (INTEL_INFO(dev)->gen < 4) |
| val >>= 1; |
| |
| if (is_backlight_combination_mode(dev)) { |
| u8 lbpc; |
| |
| pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc); |
| val *= lbpc; |
| } |
| } |
| |
| val = intel_panel_compute_brightness(dev, val); |
| DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val); |
| return val; |
| } |
| |
| static void intel_pch_panel_set_backlight(struct drm_device *dev, u32 level) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 val = I915_READ(BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; |
| I915_WRITE(BLC_PWM_CPU_CTL, val | level); |
| } |
| |
| static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 tmp; |
| |
| DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level); |
| level = intel_panel_compute_brightness(dev, level); |
| |
| if (HAS_PCH_SPLIT(dev)) |
| return intel_pch_panel_set_backlight(dev, level); |
| |
| if (is_backlight_combination_mode(dev)) { |
| u32 max = intel_panel_get_max_backlight(dev); |
| u8 lbpc; |
| |
| lbpc = level * 0xfe / max + 1; |
| level /= lbpc; |
| pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc); |
| } |
| |
| tmp = I915_READ(BLC_PWM_CTL); |
| if (INTEL_INFO(dev)->gen < 4) |
| level <<= 1; |
| tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK; |
| I915_WRITE(BLC_PWM_CTL, tmp | level); |
| } |
| |
| void intel_panel_set_backlight(struct drm_device *dev, u32 level) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| dev_priv->backlight_level = level; |
| if (dev_priv->backlight_enabled) |
| intel_panel_actually_set_backlight(dev, level); |
| } |
| |
| void intel_panel_disable_backlight(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| dev_priv->backlight_enabled = false; |
| intel_panel_actually_set_backlight(dev, 0); |
| |
| if (INTEL_INFO(dev)->gen >= 4) { |
| uint32_t reg, tmp; |
| |
| reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2; |
| |
| I915_WRITE(reg, I915_READ(reg) & ~BLM_PWM_ENABLE); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| tmp = I915_READ(BLC_PWM_PCH_CTL1); |
| tmp &= ~BLM_PCH_PWM_ENABLE; |
| I915_WRITE(BLC_PWM_PCH_CTL1, tmp); |
| } |
| } |
| } |
| |
| void intel_panel_enable_backlight(struct drm_device *dev, |
| enum pipe pipe) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (dev_priv->backlight_level == 0) |
| dev_priv->backlight_level = intel_panel_get_max_backlight(dev); |
| |
| if (INTEL_INFO(dev)->gen >= 4) { |
| uint32_t reg, tmp; |
| |
| reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2; |
| |
| |
| tmp = I915_READ(reg); |
| |
| /* Note that this can also get called through dpms changes. And |
| * we don't track the backlight dpms state, hence check whether |
| * we have to do anything first. */ |
| if (tmp & BLM_PWM_ENABLE) |
| goto set_level; |
| |
| if (dev_priv->num_pipe == 3) |
| tmp &= ~BLM_PIPE_SELECT_IVB; |
| else |
| tmp &= ~BLM_PIPE_SELECT; |
| |
| tmp |= BLM_PIPE(pipe); |
| tmp &= ~BLM_PWM_ENABLE; |
| |
| I915_WRITE(reg, tmp); |
| POSTING_READ(reg); |
| I915_WRITE(reg, tmp | BLM_PWM_ENABLE); |
| |
| if (HAS_PCH_SPLIT(dev)) { |
| tmp = I915_READ(BLC_PWM_PCH_CTL1); |
| tmp |= BLM_PCH_PWM_ENABLE; |
| tmp &= ~BLM_PCH_OVERRIDE_ENABLE; |
| I915_WRITE(BLC_PWM_PCH_CTL1, tmp); |
| } |
| } |
| |
| set_level: |
| /* Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1. |
| * BLC_PWM_CPU_CTL may be cleared to zero automatically when these |
| * registers are set. |
| */ |
| dev_priv->backlight_enabled = true; |
| intel_panel_actually_set_backlight(dev, dev_priv->backlight_level); |
| } |
| |
| static void intel_panel_init_backlight(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| dev_priv->backlight_level = intel_panel_get_backlight(dev); |
| dev_priv->backlight_enabled = dev_priv->backlight_level != 0; |
| } |
| |
| enum drm_connector_status |
| intel_panel_detect(struct drm_device *dev) |
| { |
| #if 0 |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| #endif |
| |
| if (i915_panel_ignore_lid) |
| return i915_panel_ignore_lid > 0 ? |
| connector_status_connected : |
| connector_status_disconnected; |
| |
| /* opregion lid state on HP 2540p is wrong at boot up, |
| * appears to be either the BIOS or Linux ACPI fault */ |
| #if 0 |
| /* Assume that the BIOS does not lie through the OpRegion... */ |
| if (dev_priv->opregion.lid_state) |
| return ioread32(dev_priv->opregion.lid_state) & 0x1 ? |
| connector_status_connected : |
| connector_status_disconnected; |
| #endif |
| |
| return connector_status_unknown; |
| } |
| |
| #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE |
| static int intel_panel_update_status(struct backlight_device *bd) |
| { |
| struct drm_device *dev = bl_get_data(bd); |
| intel_panel_set_backlight(dev, bd->props.brightness); |
| return 0; |
| } |
| |
| static int intel_panel_get_brightness(struct backlight_device *bd) |
| { |
| struct drm_device *dev = bl_get_data(bd); |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| return dev_priv->backlight_level; |
| } |
| |
| static const struct backlight_ops intel_panel_bl_ops = { |
| .update_status = intel_panel_update_status, |
| .get_brightness = intel_panel_get_brightness, |
| }; |
| |
| int intel_panel_setup_backlight(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct backlight_properties props; |
| struct drm_connector *connector; |
| |
| intel_panel_init_backlight(dev); |
| |
| if (dev_priv->int_lvds_connector) |
| connector = dev_priv->int_lvds_connector; |
| else if (dev_priv->int_edp_connector) |
| connector = dev_priv->int_edp_connector; |
| else |
| return -ENODEV; |
| |
| memset(&props, 0, sizeof(props)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = _intel_panel_get_max_backlight(dev); |
| if (props.max_brightness == 0) { |
| DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n"); |
| return -ENODEV; |
| } |
| dev_priv->backlight = |
| backlight_device_register("intel_backlight", |
| &connector->kdev, dev, |
| &intel_panel_bl_ops, &props); |
| |
| if (IS_ERR(dev_priv->backlight)) { |
| DRM_ERROR("Failed to register backlight: %ld\n", |
| PTR_ERR(dev_priv->backlight)); |
| dev_priv->backlight = NULL; |
| return -ENODEV; |
| } |
| dev_priv->backlight->props.brightness = intel_panel_get_backlight(dev); |
| return 0; |
| } |
| |
| void intel_panel_destroy_backlight(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| if (dev_priv->backlight) |
| backlight_device_unregister(dev_priv->backlight); |
| } |
| #else |
| int intel_panel_setup_backlight(struct drm_device *dev) |
| { |
| intel_panel_init_backlight(dev); |
| return 0; |
| } |
| |
| void intel_panel_destroy_backlight(struct drm_device *dev) |
| { |
| return; |
| } |
| #endif |