| /* |
| * linux/arch/m32r/kernel/setup_mappi.c |
| * |
| * Setup routines for Renesas MAPPI Board |
| * |
| * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, |
| * Hitoshi Yamamoto |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| |
| #include <asm/system.h> |
| #include <asm/m32r.h> |
| #include <asm/io.h> |
| |
| #define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) |
| |
| #ifndef CONFIG_SMP |
| typedef struct { |
| unsigned long icucr; /* ICU Control Register */ |
| } icu_data_t; |
| #endif /* CONFIG_SMP */ |
| |
| icu_data_t icu_data[NR_IRQS]; |
| |
| static void disable_mappi_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; |
| outl(data, port); |
| } |
| |
| static void enable_mappi_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; |
| outl(data, port); |
| } |
| |
| static void mask_and_ack_mappi(unsigned int irq) |
| { |
| disable_mappi_irq(irq); |
| } |
| |
| static void end_mappi_irq(unsigned int irq) |
| { |
| enable_mappi_irq(irq); |
| } |
| |
| static unsigned int startup_mappi_irq(unsigned int irq) |
| { |
| enable_mappi_irq(irq); |
| return (0); |
| } |
| |
| static void shutdown_mappi_irq(unsigned int irq) |
| { |
| unsigned long port; |
| |
| port = irq2port(irq); |
| outl(M32R_ICUCR_ILEVEL7, port); |
| } |
| |
| static struct hw_interrupt_type mappi_irq_type = |
| { |
| .typename = "MAPPI-IRQ", |
| .startup = startup_mappi_irq, |
| .shutdown = shutdown_mappi_irq, |
| .enable = enable_mappi_irq, |
| .disable = disable_mappi_irq, |
| .ack = mask_and_ack_mappi, |
| .end = end_mappi_irq |
| }; |
| |
| void __init init_IRQ(void) |
| { |
| static int once = 0; |
| |
| if (once) |
| return; |
| else |
| once++; |
| |
| #ifdef CONFIG_NE2000 |
| /* INT0 : LAN controller (RTL8019AS) */ |
| irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_INT0].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_INT0].action = 0; |
| irq_desc[M32R_IRQ_INT0].depth = 1; |
| icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; |
| disable_mappi_irq(M32R_IRQ_INT0); |
| #endif /* CONFIG_M32R_NE2000 */ |
| |
| /* MFT2 : system timer */ |
| irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_MFT2].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_MFT2].action = 0; |
| irq_desc[M32R_IRQ_MFT2].depth = 1; |
| icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; |
| disable_mappi_irq(M32R_IRQ_MFT2); |
| |
| #ifdef CONFIG_SERIAL_M32R_SIO |
| /* SIO0_R : uart receive data */ |
| irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO0_R].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_SIO0_R].action = 0; |
| irq_desc[M32R_IRQ_SIO0_R].depth = 1; |
| icu_data[M32R_IRQ_SIO0_R].icucr = 0; |
| disable_mappi_irq(M32R_IRQ_SIO0_R); |
| |
| /* SIO0_S : uart send data */ |
| irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO0_S].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_SIO0_S].action = 0; |
| irq_desc[M32R_IRQ_SIO0_S].depth = 1; |
| icu_data[M32R_IRQ_SIO0_S].icucr = 0; |
| disable_mappi_irq(M32R_IRQ_SIO0_S); |
| |
| /* SIO1_R : uart receive data */ |
| irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO1_R].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_SIO1_R].action = 0; |
| irq_desc[M32R_IRQ_SIO1_R].depth = 1; |
| icu_data[M32R_IRQ_SIO1_R].icucr = 0; |
| disable_mappi_irq(M32R_IRQ_SIO1_R); |
| |
| /* SIO1_S : uart send data */ |
| irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_SIO1_S].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_SIO1_S].action = 0; |
| irq_desc[M32R_IRQ_SIO1_S].depth = 1; |
| icu_data[M32R_IRQ_SIO1_S].icucr = 0; |
| disable_mappi_irq(M32R_IRQ_SIO1_S); |
| #endif /* CONFIG_SERIAL_M32R_SIO */ |
| |
| #if defined(CONFIG_M32R_PCC) |
| /* INT1 : pccard0 interrupt */ |
| irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_INT1].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_INT1].action = 0; |
| irq_desc[M32R_IRQ_INT1].depth = 1; |
| icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; |
| disable_mappi_irq(M32R_IRQ_INT1); |
| |
| /* INT2 : pccard1 interrupt */ |
| irq_desc[M32R_IRQ_INT2].status = IRQ_DISABLED; |
| irq_desc[M32R_IRQ_INT2].handler = &mappi_irq_type; |
| irq_desc[M32R_IRQ_INT2].action = 0; |
| irq_desc[M32R_IRQ_INT2].depth = 1; |
| icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; |
| disable_mappi_irq(M32R_IRQ_INT2); |
| #endif /* CONFIG_M32RPCC */ |
| } |