tools/power/x86/turbostat/turbostat.8 - LeafOS-Devices/android_kernel_samsung_gta4xl - Gitiles

 .TH TURBOSTAT 8
 .SH NAME
 turbostat \- Report processor frequency and idle statistics
 .SH SYNOPSIS
 .ft B
 .B turbostat
 .RB [ Options ]
 .RB command
 .br
 .B turbostat
 .RB [ Options ]
 .RB [ "\--interval seconds" ]
 .SH DESCRIPTION
 \fBturbostat \fP reports processor topology, frequency,
 idle power-state statistics, temperature and power on X86 processors.
 There are two ways to invoke turbostat.
 The first method is to supply a
 \fBcommand\fP, which is forked and statistics are printed
 upon its completion.
 The second method is to omit the command,
 and turbostat displays statistics every 5 seconds.
 The 5-second interval can be changed using the --interval option.
 .PP
 Some information is not available on older processors.
 .SS Options
 Options can be specified with a single or double '-', and only as much of the option
 name as necessary to disambiguate it from others is necessary.  Note that options are case-sensitive.
 .PP
 \fB--add attributes\fP add column with counter having specified 'attributes'.  The 'location' attribute is required, all others are optional.
 .nf
 	location: {\fBmsrDDD\fP | \fBmsr0xXXX\fP}
 		msrDDD is a decimal offset, eg. msr16
 		msr0xXXX is a hex offset, eg. msr0x10

 	scope: {\fBcpu\fP | \fBcore\fP | \fBpackage\fP}
 		sample and print the counter for every cpu, core, or package.
 		default: cpu

 	size: {\fBu32\fP | \fBu64\fP }
 		MSRs are read as 64-bits, u32 truncates the displayed value to 32-bits.
 		default: u64

 	format: {\fBraw\fP | \fBdelta\fP | \fBpercent\fP}
 		'raw' shows the MSR contents in hex.
 		'delta' shows the difference in values during the measurement interval.
 		'percent' shows the delta as a percentage of the cycles elapsed.
 		default: delta
 .fi
 .PP
 \fB--Dump\fP displays the raw counter values.
 .PP
 \fB--debug\fP displays additional system configuration information.  Invoking this parameter
 more than once may also enable internal turbostat debug information.
 .PP
 \fB--interval seconds\fP overrides the default 5.0 second measurement interval.
 .PP
 \fB--out output_file\fP turbostat output is written to the specified output_file.
 The file is truncated if it already exists, and it is created if it does not exist.
 .PP
 \fB--help\fP displays usage for the most common parameters.
 .PP
 \fB--Joules\fP displays energy in Joules, rather than dividing Joules by time to print power in Watts.
 .PP
 \fB--Package\fP limits output to the system summary plus the 1st thread in each Package.
 .PP
 \fB--processor\fP limits output to the system summary plus the 1st thread in each processor of each package.  Ie. it skips hyper-threaded siblings.
 .PP
 \fB--Summary\fP limits output to a 1-line System Summary for each interval.
 .PP
 \fB--TCC temperature\fP sets the Thermal Control Circuit temperature for systems which do not export that value.  This is used for making sense of the Digital Thermal Sensor outputs, as they return degrees Celsius below the TCC activation temperature.
 .PP
 \fB--version\fP displays the version.
 .PP
 The \fBcommand\fP parameter forks \fBcommand\fP, and upon its exit,
 displays the statistics gathered since it was forked.
 .PP
 .SH DEFAULT FIELD DESCRIPTIONS
 .nf
 \fBCPU\fP Linux CPU (logical processor) number.  Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together.
 \fBAVG_MHz\fP number of cycles executed divided by time elapsed.
 \fBBusy%\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
 \fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
 \fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
 .fi
 .PP
 .SH DEBUG FIELD DESCRIPTIONS
 .nf
 \fBPackage\fP processor package number.
 \fBCore\fP processor core number.
 Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).
 \fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
 \fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
 \fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
 \fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
 \fBPkgWatt\fP Watts consumed by the whole package.
 \fBCorWatt\fP Watts consumed by the core part of the package.
 \fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
 \fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
 \fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
 \fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
 .fi
 .PP
 .SH PERIODIC EXAMPLE
 Without any parameters, turbostat displays statistics ever 5 seconds.
 Periodic output goes to stdout, by default, unless --out is used to specify an output file.
 The 5-second interval can be changed with th "-i sec" option.
 Or a command may be specified as in "FORK EXAMPLE" below.
 .nf
 [root@hsw]# ./turbostat
      CPU Avg_MHz   Busy% Bzy_MHz TSC_MHz
        -     488   12.51    3898    3498
        0       0    0.01    3885    3498
        4    3897   99.99    3898    3498
        1       0    0.00    3861    3498
        5       0    0.00    3882    3498
        2       1    0.02    3894    3498
        6       2    0.06    3898    3498
        3       0    0.00    3849    3498
        7       0    0.00    3877    3498

 .fi
 .SH DEBUG EXAMPLE
 The "--debug" option prints additional system information before measurements:

 The first row of statistics is a summary for the entire system.
 For residency % columns, the summary is a weighted average.
 For Temperature columns, the summary is the column maximum.
 For Watts columns, the summary is a system total.
 Subsequent rows show per-CPU statistics.
 .nf
 turbostat version 4.1 10-Feb, 2015 - Len Brown <lenb@kernel.org>
 CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3)
 CPUID(6): APERF, DTS, PTM, EPB
 RAPL: 3121 sec. Joule Counter Range, at 84 Watts
 cpu0: MSR_NHM_PLATFORM_INFO: 0x80838f3012300
 8 * 100 = 800 MHz max efficiency
 35 * 100 = 3500 MHz TSC frequency
 cpu0: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
 cpu0: MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0)
 cpu0: MSR_TURBO_RATIO_LIMIT: 0x25262727
 37 * 100 = 3700 MHz max turbo 4 active cores
 38 * 100 = 3800 MHz max turbo 3 active cores
 39 * 100 = 3900 MHz max turbo 2 active cores
 39 * 100 = 3900 MHz max turbo 1 active cores
 cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
 cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Auto-HWP, Amps, MultiCoreTurbo, Transitions, )
 cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x00000000 (Active: ) (Logged: )
 cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d000000 (Active: ) (Logged: Amps, PkgPwrL1, PkgPwrL2, )
 cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
 cpu0: MSR_PKG_POWER_INFO: 0x000002a0 (84 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
 cpu0: MSR_PKG_POWER_LIMIT: 0x428348001a82a0 (UNlocked)
 cpu0: PKG Limit #1: ENabled (84.000000 Watts, 8.000000 sec, clamp DISabled)
 cpu0: PKG Limit #2: ENabled (105.000000 Watts, 0.002441* sec, clamp DISabled)
 cpu0: MSR_PP0_POLICY: 0
 cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
 cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
 cpu0: MSR_PP1_POLICY: 0
 cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
 cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
 cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C)
 cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88340800 (48 C)
 cpu0: MSR_IA32_THERM_STATUS: 0x88340000 (48 C +/- 1)
 cpu1: MSR_IA32_THERM_STATUS: 0x88440000 (32 C +/- 1)
 cpu2: MSR_IA32_THERM_STATUS: 0x88450000 (31 C +/- 1)
 cpu3: MSR_IA32_THERM_STATUS: 0x88490000 (27 C +/- 1)
     Core     CPU Avg_MHz   Busy% Bzy_MHz TSC_MHz     SMI  CPU%c1  CPU%c3  CPU%c6  CPU%c7 CoreTmp  PkgTmp PkgWatt CorWatt GFXWatt
        -       -     493   12.64    3898    3498       0   12.64    0.00    0.00   74.72      47      47   21.62   13.74    0.00
        0       0       4    0.11    3894    3498       0   99.89    0.00    0.00    0.00      47      47   21.62   13.74    0.00
        0       4    3897   99.98    3898    3498       0    0.02
        1       1       7    0.17    3887    3498       0    0.04    0.00    0.00   99.79      32
        1       5       0    0.00    3885    3498       0    0.21
        2       2      29    0.76    3895    3498       0    0.10    0.01    0.01   99.13      32
        2       6       2    0.06    3896    3498       0    0.80
        3       3       1    0.02    3832    3498       0    0.03    0.00    0.00   99.95      28
        3       7       0    0.00    3879    3498       0    0.04
 ^C

 .fi
 The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
 available at the minimum package voltage.  The \fBTSC frequency\fP is the base
 frequency of the processor -- this should match the brand string
 in /proc/cpuinfo.  This base frequency
 should be sustainable on all CPUs indefinitely, given nominal power and cooling.
 The remaining rows show what maximum turbo frequency is possible
 depending on the number of idle cores.  Note that not all information is
 available on all processors.
 .PP
 The --debug option adds additional columns to the measurement ouput, including CPU idle power-state residency processor temperature sensor readinds.
 See the field definitions above.
 .SH FORK EXAMPLE
 If turbostat is invoked with a command, it will fork that command
 and output the statistics gathered after the command exits.
 In this case, turbostat output goes to stderr, by default.
 Output can instead be saved to a file using the --out option.
 eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
 until ^C while the other CPUs are mostly idle:

 .nf
 root@hsw: turbostat cat /dev/zero > /dev/null
 ^C
      CPU Avg_MHz   Busy% Bzy_MHz TSC_MHz
        -     482   12.51    3854    3498
        0       0    0.01    1960    3498
        4       0    0.00    2128    3498
        1       0    0.00    3003    3498
        5    3854   99.98    3855    3498
        2       0    0.01    3504    3498
        6       3    0.08    3884    3498
        3       0    0.00    2553    3498
        7       0    0.00    2126    3498
 10.783983 sec

 .fi
 Above the cycle soaker drives cpu5 up its 3.9 GHz turbo limit.
 The first row shows the average MHz and Busy% across all the processors in the system.

 Note that the Avg_MHz column reflects the total number of cycles executed
 divided by the measurement interval.  If the Busy% column is 100%,
 then the processor was running at that speed the entire interval.
 The Avg_MHz multiplied by the Busy% results in the Bzy_MHz --
 which is the average frequency while the processor was executing --
 not including any non-busy idle time.

 .SH NOTES

 .B "turbostat "
 must be run as root.
 Alternatively, non-root users can be enabled to run turbostat this way:

 # setcap cap_sys_rawio=ep ./turbostat

 # chmod +r /dev/cpu/*/msr

 .B "turbostat "
 reads hardware counters, but doesn't write them.
 So it will not interfere with the OS or other programs, including
 multiple invocations of itself.

 \fBturbostat \fP
 may work poorly on Linux-2.6.20 through 2.6.29,
 as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF MSRs
 in those kernels.

 AVG_MHz = APERF_delta/measurement_interval.  This is the actual
 number of elapsed cycles divided by the entire sample interval --
 including idle time.  Note that this calculation is resilient
 to systems lacking a non-stop TSC.

 TSC_MHz = TSC_delta/measurement_interval.
 On a system with an invariant TSC, this value will be constant
 and will closely match the base frequency value shown
 in the brand string in /proc/cpuinfo.  On a system where
 the TSC stops in idle, TSC_MHz will drop
 below the processor's base frequency.

 Busy% = MPERF_delta/TSC_delta

 Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval

 Note that these calculations depend on TSC_delta, so they
 are not reliable during intervals when TSC_MHz is not running at the base frequency.

 Turbostat data collection is not atomic.
 Extremely short measurement intervals (much less than 1 second),
 or system activity that prevents turbostat from being able
 to run on all CPUS to quickly collect data, will result in
 inconsistent results.

 The APERF, MPERF MSRs are defined to count non-halted cycles.
 Although it is not guaranteed by the architecture, turbostat assumes
 that they count at TSC rate, which is true on all processors tested to date.

 .SH REFERENCES
 Volume 3B: System Programming Guide"
 http://www.intel.com/products/processor/manuals/

 .SH FILES
 .ta
 .nf
 /dev/cpu/*/msr
 .fi

 .SH "SEE ALSO"
 msr(4), vmstat(8)
 .PP
 .SH AUTHOR
 .nf
 Written by Len Brown <len.brown@intel.com>
	.TH TURBOSTAT 8
	.SH NAME
	turbostat \- Report processor frequency and idle statistics
	.SH SYNOPSIS
	.ft B
	.B turbostat
	.RB [ Options ]
	.RB command
	.br
	.B turbostat
	.RB [ Options ]
	.RB [ "\--interval seconds" ]
	.SH DESCRIPTION
	\fBturbostat \fP reports processor topology, frequency,
	idle power-state statistics, temperature and power on X86 processors.
	There are two ways to invoke turbostat.
	The first method is to supply a
	\fBcommand\fP, which is forked and statistics are printed
	upon its completion.
	The second method is to omit the command,
	and turbostat displays statistics every 5 seconds.
	The 5-second interval can be changed using the --interval option.
	.PP
	Some information is not available on older processors.
	.SS Options
	Options can be specified with a single or double '-', and only as much of the option
	name as necessary to disambiguate it from others is necessary. Note that options are case-sensitive.
	.PP
	\fB--add attributes\fP add column with counter having specified 'attributes'. The 'location' attribute is required, all others are optional.
	.nf
	location: {\fBmsrDDD\fP \| \fBmsr0xXXX\fP}
	msrDDD is a decimal offset, eg. msr16
	msr0xXXX is a hex offset, eg. msr0x10

	scope: {\fBcpu\fP \| \fBcore\fP \| \fBpackage\fP}
	sample and print the counter for every cpu, core, or package.
	default: cpu

	size: {\fBu32\fP \| \fBu64\fP }
	MSRs are read as 64-bits, u32 truncates the displayed value to 32-bits.
	default: u64

	format: {\fBraw\fP \| \fBdelta\fP \| \fBpercent\fP}
	'raw' shows the MSR contents in hex.
	'delta' shows the difference in values during the measurement interval.
	'percent' shows the delta as a percentage of the cycles elapsed.
	default: delta
	.fi
	.PP
	\fB--Dump\fP displays the raw counter values.
	.PP
	\fB--debug\fP displays additional system configuration information. Invoking this parameter
	more than once may also enable internal turbostat debug information.
	.PP
	\fB--interval seconds\fP overrides the default 5.0 second measurement interval.
	.PP
	\fB--out output_file\fP turbostat output is written to the specified output_file.
	The file is truncated if it already exists, and it is created if it does not exist.
	.PP
	\fB--help\fP displays usage for the most common parameters.
	.PP
	\fB--Joules\fP displays energy in Joules, rather than dividing Joules by time to print power in Watts.
	.PP
	\fB--Package\fP limits output to the system summary plus the 1st thread in each Package.
	.PP
	\fB--processor\fP limits output to the system summary plus the 1st thread in each processor of each package. Ie. it skips hyper-threaded siblings.
	.PP
	\fB--Summary\fP limits output to a 1-line System Summary for each interval.
	.PP
	\fB--TCC temperature\fP sets the Thermal Control Circuit temperature for systems which do not export that value. This is used for making sense of the Digital Thermal Sensor outputs, as they return degrees Celsius below the TCC activation temperature.
	.PP
	\fB--version\fP displays the version.
	.PP
	The \fBcommand\fP parameter forks \fBcommand\fP, and upon its exit,
	displays the statistics gathered since it was forked.
	.PP
	.SH DEFAULT FIELD DESCRIPTIONS
	.nf
	\fBCPU\fP Linux CPU (logical processor) number. Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together.
	\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
	\fBBusy%\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
	\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
	\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
	.fi
	.PP
	.SH DEBUG FIELD DESCRIPTIONS
	.nf
	\fBPackage\fP processor package number.
	\fBCore\fP processor core number.
	Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT).
	\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
	\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
	\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
	\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
	\fBPkgWatt\fP Watts consumed by the whole package.
	\fBCorWatt\fP Watts consumed by the core part of the package.
	\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
	\fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
	\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
	\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
	.fi
	.PP
	.SH PERIODIC EXAMPLE
	Without any parameters, turbostat displays statistics ever 5 seconds.
	Periodic output goes to stdout, by default, unless --out is used to specify an output file.
	The 5-second interval can be changed with th "-i sec" option.
	Or a command may be specified as in "FORK EXAMPLE" below.
	.nf
	[root@hsw]# ./turbostat
	CPU Avg_MHz Busy% Bzy_MHz TSC_MHz
	- 488 12.51 3898 3498
	0 0 0.01 3885 3498
	4 3897 99.99 3898 3498
	1 0 0.00 3861 3498
	5 0 0.00 3882 3498
	2 1 0.02 3894 3498
	6 2 0.06 3898 3498
	3 0 0.00 3849 3498
	7 0 0.00 3877 3498

	.fi
	.SH DEBUG EXAMPLE
	The "--debug" option prints additional system information before measurements:

	The first row of statistics is a summary for the entire system.
	For residency % columns, the summary is a weighted average.
	For Temperature columns, the summary is the column maximum.
	For Watts columns, the summary is a system total.
	Subsequent rows show per-CPU statistics.
	.nf
	turbostat version 4.1 10-Feb, 2015 - Len Brown <lenb@kernel.org>
	CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3)
	CPUID(6): APERF, DTS, PTM, EPB
	RAPL: 3121 sec. Joule Counter Range, at 84 Watts
	cpu0: MSR_NHM_PLATFORM_INFO: 0x80838f3012300
	8 * 100 = 800 MHz max efficiency
	35 * 100 = 3500 MHz TSC frequency
	cpu0: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
	cpu0: MSR_NHM_SNB_PKG_CST_CFG_CTL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0)
	cpu0: MSR_TURBO_RATIO_LIMIT: 0x25262727
	37 * 100 = 3700 MHz max turbo 4 active cores
	38 * 100 = 3800 MHz max turbo 3 active cores
	39 * 100 = 3900 MHz max turbo 2 active cores
	39 * 100 = 3900 MHz max turbo 1 active cores
	cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
	cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Auto-HWP, Amps, MultiCoreTurbo, Transitions, )
	cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x00000000 (Active: ) (Logged: )
	cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d000000 (Active: ) (Logged: Amps, PkgPwrL1, PkgPwrL2, )
	cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
	cpu0: MSR_PKG_POWER_INFO: 0x000002a0 (84 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
	cpu0: MSR_PKG_POWER_LIMIT: 0x428348001a82a0 (UNlocked)
	cpu0: PKG Limit #1: ENabled (84.000000 Watts, 8.000000 sec, clamp DISabled)
	cpu0: PKG Limit #2: ENabled (105.000000 Watts, 0.002441* sec, clamp DISabled)
	cpu0: MSR_PP0_POLICY: 0
	cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
	cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
	cpu0: MSR_PP1_POLICY: 0
	cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
	cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
	cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C)
	cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x88340800 (48 C)
	cpu0: MSR_IA32_THERM_STATUS: 0x88340000 (48 C +/- 1)
	cpu1: MSR_IA32_THERM_STATUS: 0x88440000 (32 C +/- 1)
	cpu2: MSR_IA32_THERM_STATUS: 0x88450000 (31 C +/- 1)
	cpu3: MSR_IA32_THERM_STATUS: 0x88490000 (27 C +/- 1)
	Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp PkgWatt CorWatt GFXWatt
	- - 493 12.64 3898 3498 0 12.64 0.00 0.00 74.72 47 47 21.62 13.74 0.00
	0 0 4 0.11 3894 3498 0 99.89 0.00 0.00 0.00 47 47 21.62 13.74 0.00
	0 4 3897 99.98 3898 3498 0 0.02
	1 1 7 0.17 3887 3498 0 0.04 0.00 0.00 99.79 32
	1 5 0 0.00 3885 3498 0 0.21
	2 2 29 0.76 3895 3498 0 0.10 0.01 0.01 99.13 32
	2 6 2 0.06 3896 3498 0 0.80
	3 3 1 0.02 3832 3498 0 0.03 0.00 0.00 99.95 28
	3 7 0 0.00 3879 3498 0 0.04
	^C

	.fi
	The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
	available at the minimum package voltage. The \fBTSC frequency\fP is the base
	frequency of the processor -- this should match the brand string
	in /proc/cpuinfo. This base frequency
	should be sustainable on all CPUs indefinitely, given nominal power and cooling.
	The remaining rows show what maximum turbo frequency is possible
	depending on the number of idle cores. Note that not all information is
	available on all processors.
	.PP
	The --debug option adds additional columns to the measurement ouput, including CPU idle power-state residency processor temperature sensor readinds.
	See the field definitions above.
	.SH FORK EXAMPLE
	If turbostat is invoked with a command, it will fork that command
	and output the statistics gathered after the command exits.
	In this case, turbostat output goes to stderr, by default.
	Output can instead be saved to a file using the --out option.
	eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds
	until ^C while the other CPUs are mostly idle:

	.nf
	root@hsw: turbostat cat /dev/zero > /dev/null
	^C
	CPU Avg_MHz Busy% Bzy_MHz TSC_MHz
	- 482 12.51 3854 3498
	0 0 0.01 1960 3498
	4 0 0.00 2128 3498
	1 0 0.00 3003 3498
	5 3854 99.98 3855 3498
	2 0 0.01 3504 3498
	6 3 0.08 3884 3498
	3 0 0.00 2553 3498
	7 0 0.00 2126 3498
	10.783983 sec

	.fi
	Above the cycle soaker drives cpu5 up its 3.9 GHz turbo limit.
	The first row shows the average MHz and Busy% across all the processors in the system.

	Note that the Avg_MHz column reflects the total number of cycles executed
	divided by the measurement interval. If the Busy% column is 100%,
	then the processor was running at that speed the entire interval.
	The Avg_MHz multiplied by the Busy% results in the Bzy_MHz --
	which is the average frequency while the processor was executing --
	not including any non-busy idle time.

	.SH NOTES

	.B "turbostat "
	must be run as root.
	Alternatively, non-root users can be enabled to run turbostat this way:

	# setcap cap_sys_rawio=ep ./turbostat

	# chmod +r /dev/cpu/*/msr

	.B "turbostat "
	reads hardware counters, but doesn't write them.
	So it will not interfere with the OS or other programs, including
	multiple invocations of itself.

	\fBturbostat \fP
	may work poorly on Linux-2.6.20 through 2.6.29,
	as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF MSRs
	in those kernels.

	AVG_MHz = APERF_delta/measurement_interval. This is the actual
	number of elapsed cycles divided by the entire sample interval --
	including idle time. Note that this calculation is resilient
	to systems lacking a non-stop TSC.

	TSC_MHz = TSC_delta/measurement_interval.
	On a system with an invariant TSC, this value will be constant
	and will closely match the base frequency value shown
	in the brand string in /proc/cpuinfo. On a system where
	the TSC stops in idle, TSC_MHz will drop
	below the processor's base frequency.

	Busy% = MPERF_delta/TSC_delta

	Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval

	Note that these calculations depend on TSC_delta, so they
	are not reliable during intervals when TSC_MHz is not running at the base frequency.

	Turbostat data collection is not atomic.
	Extremely short measurement intervals (much less than 1 second),
	or system activity that prevents turbostat from being able
	to run on all CPUS to quickly collect data, will result in
	inconsistent results.

	The APERF, MPERF MSRs are defined to count non-halted cycles.
	Although it is not guaranteed by the architecture, turbostat assumes
	that they count at TSC rate, which is true on all processors tested to date.

	.SH REFERENCES
	Volume 3B: System Programming Guide"
	http://www.intel.com/products/processor/manuals/

	.SH FILES
	.ta
	.nf
	/dev/cpu/*/msr
	.fi

	.SH "SEE ALSO"
	msr(4), vmstat(8)
	.PP
	.SH AUTHOR
	.nf
	Written by Len Brown <len.brown@intel.com>