| /* Paravirtualization interfaces |
| Copyright (C) 2006 Rusty Russell IBM Corporation |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/efi.h> |
| #include <linux/bcd.h> |
| #include <linux/start_kernel.h> |
| |
| #include <asm/bug.h> |
| #include <asm/paravirt.h> |
| #include <asm/desc.h> |
| #include <asm/setup.h> |
| #include <asm/arch_hooks.h> |
| #include <asm/time.h> |
| #include <asm/irq.h> |
| #include <asm/delay.h> |
| #include <asm/fixmap.h> |
| #include <asm/apic.h> |
| #include <asm/tlbflush.h> |
| #include <asm/timer.h> |
| |
| /* nop stub */ |
| void _paravirt_nop(void) |
| { |
| } |
| |
| static void __init default_banner(void) |
| { |
| printk(KERN_INFO "Booting paravirtualized kernel on %s\n", |
| paravirt_ops.name); |
| } |
| |
| char *memory_setup(void) |
| { |
| return paravirt_ops.memory_setup(); |
| } |
| |
| /* Simple instruction patching code. */ |
| #define DEF_NATIVE(name, code) \ |
| extern const char start_##name[], end_##name[]; \ |
| asm("start_" #name ": " code "; end_" #name ":") |
| DEF_NATIVE(cli, "cli"); |
| DEF_NATIVE(sti, "sti"); |
| DEF_NATIVE(popf, "push %eax; popf"); |
| DEF_NATIVE(pushf, "pushf; pop %eax"); |
| DEF_NATIVE(pushf_cli, "pushf; pop %eax; cli"); |
| DEF_NATIVE(iret, "iret"); |
| DEF_NATIVE(sti_sysexit, "sti; sysexit"); |
| |
| static const struct native_insns |
| { |
| const char *start, *end; |
| } native_insns[] = { |
| [PARAVIRT_IRQ_DISABLE] = { start_cli, end_cli }, |
| [PARAVIRT_IRQ_ENABLE] = { start_sti, end_sti }, |
| [PARAVIRT_RESTORE_FLAGS] = { start_popf, end_popf }, |
| [PARAVIRT_SAVE_FLAGS] = { start_pushf, end_pushf }, |
| [PARAVIRT_SAVE_FLAGS_IRQ_DISABLE] = { start_pushf_cli, end_pushf_cli }, |
| [PARAVIRT_INTERRUPT_RETURN] = { start_iret, end_iret }, |
| [PARAVIRT_STI_SYSEXIT] = { start_sti_sysexit, end_sti_sysexit }, |
| }; |
| |
| static unsigned native_patch(u8 type, u16 clobbers, void *insns, unsigned len) |
| { |
| unsigned int insn_len; |
| |
| /* Don't touch it if we don't have a replacement */ |
| if (type >= ARRAY_SIZE(native_insns) || !native_insns[type].start) |
| return len; |
| |
| insn_len = native_insns[type].end - native_insns[type].start; |
| |
| /* Similarly if we can't fit replacement. */ |
| if (len < insn_len) |
| return len; |
| |
| memcpy(insns, native_insns[type].start, insn_len); |
| return insn_len; |
| } |
| |
| void init_IRQ(void) |
| { |
| paravirt_ops.init_IRQ(); |
| } |
| |
| static void native_flush_tlb(void) |
| { |
| __native_flush_tlb(); |
| } |
| |
| /* |
| * Global pages have to be flushed a bit differently. Not a real |
| * performance problem because this does not happen often. |
| */ |
| static void native_flush_tlb_global(void) |
| { |
| __native_flush_tlb_global(); |
| } |
| |
| static void native_flush_tlb_single(u32 addr) |
| { |
| __native_flush_tlb_single(addr); |
| } |
| |
| /* These are in entry.S */ |
| extern void native_iret(void); |
| extern void native_irq_enable_sysexit(void); |
| |
| static int __init print_banner(void) |
| { |
| paravirt_ops.banner(); |
| return 0; |
| } |
| core_initcall(print_banner); |
| |
| struct paravirt_ops paravirt_ops = { |
| .name = "bare hardware", |
| .paravirt_enabled = 0, |
| .kernel_rpl = 0, |
| |
| .patch = native_patch, |
| .banner = default_banner, |
| .arch_setup = paravirt_nop, |
| .memory_setup = machine_specific_memory_setup, |
| .get_wallclock = native_get_wallclock, |
| .set_wallclock = native_set_wallclock, |
| .time_init = hpet_time_init, |
| .init_IRQ = native_init_IRQ, |
| |
| .cpuid = native_cpuid, |
| .get_debugreg = native_get_debugreg, |
| .set_debugreg = native_set_debugreg, |
| .clts = native_clts, |
| .read_cr0 = native_read_cr0, |
| .write_cr0 = native_write_cr0, |
| .read_cr2 = native_read_cr2, |
| .write_cr2 = native_write_cr2, |
| .read_cr3 = native_read_cr3, |
| .write_cr3 = native_write_cr3, |
| .read_cr4 = native_read_cr4, |
| .read_cr4_safe = native_read_cr4_safe, |
| .write_cr4 = native_write_cr4, |
| .save_fl = native_save_fl, |
| .restore_fl = native_restore_fl, |
| .irq_disable = native_irq_disable, |
| .irq_enable = native_irq_enable, |
| .safe_halt = native_safe_halt, |
| .halt = native_halt, |
| .wbinvd = native_wbinvd, |
| .read_msr = native_read_msr_safe, |
| .write_msr = native_write_msr_safe, |
| .read_tsc = native_read_tsc, |
| .read_pmc = native_read_pmc, |
| .get_scheduled_cycles = native_read_tsc, |
| .get_cpu_khz = native_calculate_cpu_khz, |
| .load_tr_desc = native_load_tr_desc, |
| .set_ldt = native_set_ldt, |
| .load_gdt = native_load_gdt, |
| .load_idt = native_load_idt, |
| .store_gdt = native_store_gdt, |
| .store_idt = native_store_idt, |
| .store_tr = native_store_tr, |
| .load_tls = native_load_tls, |
| .write_ldt_entry = write_dt_entry, |
| .write_gdt_entry = write_dt_entry, |
| .write_idt_entry = write_dt_entry, |
| .load_esp0 = native_load_esp0, |
| |
| .set_iopl_mask = native_set_iopl_mask, |
| .io_delay = native_io_delay, |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| .apic_write = native_apic_write, |
| .apic_write_atomic = native_apic_write_atomic, |
| .apic_read = native_apic_read, |
| .setup_boot_clock = setup_boot_APIC_clock, |
| .setup_secondary_clock = setup_secondary_APIC_clock, |
| #endif |
| .set_lazy_mode = paravirt_nop, |
| |
| .flush_tlb_user = native_flush_tlb, |
| .flush_tlb_kernel = native_flush_tlb_global, |
| .flush_tlb_single = native_flush_tlb_single, |
| |
| .map_pt_hook = paravirt_nop, |
| |
| .alloc_pt = paravirt_nop, |
| .alloc_pd = paravirt_nop, |
| .alloc_pd_clone = paravirt_nop, |
| .release_pt = paravirt_nop, |
| .release_pd = paravirt_nop, |
| |
| .set_pte = native_set_pte, |
| .set_pte_at = native_set_pte_at, |
| .set_pmd = native_set_pmd, |
| .pte_update = paravirt_nop, |
| .pte_update_defer = paravirt_nop, |
| |
| .ptep_get_and_clear = native_ptep_get_and_clear, |
| |
| #ifdef CONFIG_X86_PAE |
| .set_pte_atomic = native_set_pte_atomic, |
| .set_pte_present = native_set_pte_present, |
| .set_pud = native_set_pud, |
| .pte_clear = native_pte_clear, |
| .pmd_clear = native_pmd_clear, |
| |
| .pmd_val = native_pmd_val, |
| .make_pmd = native_make_pmd, |
| #endif |
| |
| .pte_val = native_pte_val, |
| .pgd_val = native_pgd_val, |
| |
| .make_pte = native_make_pte, |
| .make_pgd = native_make_pgd, |
| |
| .irq_enable_sysexit = native_irq_enable_sysexit, |
| .iret = native_iret, |
| |
| .startup_ipi_hook = paravirt_nop, |
| }; |
| |
| /* |
| * NOTE: CONFIG_PARAVIRT is experimental and the paravirt_ops |
| * semantics are subject to change. Hence we only do this |
| * internal-only export of this, until it gets sorted out and |
| * all lowlevel CPU ops used by modules are separately exported. |
| */ |
| EXPORT_SYMBOL_GPL(paravirt_ops); |