| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2004-2007 Cavium Networks |
| */ |
| #include <linux/console.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial.h> |
| #include <linux/serial_8250.h> |
| #include <linux/serial_reg.h> |
| #include <linux/tty.h> |
| #include <linux/irq.h> |
| |
| #include <asm/time.h> |
| |
| #include <asm/octeon/octeon.h> |
| |
| #define DEBUG_UART 1 |
| |
| unsigned int octeon_serial_in(struct uart_port *up, int offset) |
| { |
| int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3))); |
| if (offset == UART_IIR && (rv & 0xf) == 7) { |
| /* Busy interrupt, read the USR (39) and try again. */ |
| cvmx_read_csr((uint64_t)(up->membase + (39 << 3))); |
| rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3))); |
| } |
| return rv; |
| } |
| |
| void octeon_serial_out(struct uart_port *up, int offset, int value) |
| { |
| /* |
| * If bits 6 or 7 of the OCTEON UART's LCR are set, it quits |
| * working. |
| */ |
| if (offset == UART_LCR) |
| value &= 0x9f; |
| cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value); |
| } |
| |
| static int __devinit octeon_serial_probe(struct platform_device *pdev) |
| { |
| int irq, res; |
| struct resource *res_mem; |
| struct uart_8250_port up; |
| |
| /* All adaptors have an irq. */ |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| memset(&up, 0, sizeof(up)); |
| |
| up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; |
| up.port.type = PORT_OCTEON; |
| up.port.iotype = UPIO_MEM; |
| up.port.regshift = 3; |
| up.port.dev = &pdev->dev; |
| |
| if (octeon_is_simulation()) |
| /* Make simulator output fast*/ |
| up.port.uartclk = 115200 * 16; |
| else |
| up.port.uartclk = octeon_get_io_clock_rate(); |
| |
| up.port.serial_in = octeon_serial_in; |
| up.port.serial_out = octeon_serial_out; |
| up.port.irq = irq; |
| |
| res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res_mem == NULL) { |
| dev_err(&pdev->dev, "found no memory resource\n"); |
| return -ENXIO; |
| } |
| up.port.mapbase = res_mem->start; |
| up.port.membase = ioremap(res_mem->start, resource_size(res_mem)); |
| |
| res = serial8250_register_8250_port(&up); |
| |
| return res >= 0 ? 0 : res; |
| } |
| |
| static struct of_device_id octeon_serial_match[] = { |
| { |
| .compatible = "cavium,octeon-3860-uart", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, octeon_serial_match); |
| |
| static struct platform_driver octeon_serial_driver = { |
| .probe = octeon_serial_probe, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "octeon_serial", |
| .of_match_table = octeon_serial_match, |
| }, |
| }; |
| |
| static int __init octeon_serial_init(void) |
| { |
| return platform_driver_register(&octeon_serial_driver); |
| } |
| late_initcall(octeon_serial_init); |