| /* |
| * gdb-low.S contains the low-level trap handler for the GDB stub. |
| * |
| * Copyright (C) 1995 Andreas Busse |
| */ |
| #include <linux/config.h> |
| #include <linux/sys.h> |
| |
| #include <asm/asm.h> |
| #include <asm/errno.h> |
| #include <asm/mipsregs.h> |
| #include <asm/regdef.h> |
| #include <asm/stackframe.h> |
| #include <asm/gdb-stub.h> |
| |
| #ifdef CONFIG_32BIT |
| #define DMFC0 mfc0 |
| #define DMTC0 mtc0 |
| #define LDC1 lwc1 |
| #define SDC1 lwc1 |
| #endif |
| #ifdef CONFIG_64BIT |
| #define DMFC0 dmfc0 |
| #define DMTC0 dmtc0 |
| #define LDC1 ldc1 |
| #define SDC1 ldc1 |
| #endif |
| |
| /* |
| * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed) |
| * part is used to store registers and passed to exception handler. |
| * The upper part is reserved for "call func" feature where gdb client |
| * saves some of the regs, setups call frame and passes args. |
| * |
| * A trace shows about 200 bytes are used to store about half of all regs. |
| * The rest should be big enough for frame setup and passing args. |
| */ |
| |
| /* |
| * The low level trap handler |
| */ |
| .align 5 |
| NESTED(trap_low, GDB_FR_SIZE, sp) |
| .set noat |
| .set noreorder |
| |
| mfc0 k0, CP0_STATUS |
| sll k0, 3 /* extract cu0 bit */ |
| bltz k0, 1f |
| move k1, sp |
| |
| /* |
| * Called from user mode, go somewhere else. |
| */ |
| mfc0 k0, CP0_CAUSE |
| andi k0, k0, 0x7c |
| #ifdef CONFIG_64BIT |
| dsll k0, k0, 1 |
| #endif |
| PTR_L k1, saved_vectors(k0) |
| jr k1 |
| nop |
| 1: |
| move k0, sp |
| PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above |
| LONG_S k0, GDB_FR_REG29(sp) |
| LONG_S $2, GDB_FR_REG2(sp) |
| |
| /* |
| * First save the CP0 and special registers |
| */ |
| |
| mfc0 v0, CP0_STATUS |
| LONG_S v0, GDB_FR_STATUS(sp) |
| mfc0 v0, CP0_CAUSE |
| LONG_S v0, GDB_FR_CAUSE(sp) |
| DMFC0 v0, CP0_EPC |
| LONG_S v0, GDB_FR_EPC(sp) |
| DMFC0 v0, CP0_BADVADDR |
| LONG_S v0, GDB_FR_BADVADDR(sp) |
| mfhi v0 |
| LONG_S v0, GDB_FR_HI(sp) |
| mflo v0 |
| LONG_S v0, GDB_FR_LO(sp) |
| |
| /* |
| * Now the integer registers |
| */ |
| |
| LONG_S zero, GDB_FR_REG0(sp) /* I know... */ |
| LONG_S $1, GDB_FR_REG1(sp) |
| /* v0 already saved */ |
| LONG_S $3, GDB_FR_REG3(sp) |
| LONG_S $4, GDB_FR_REG4(sp) |
| LONG_S $5, GDB_FR_REG5(sp) |
| LONG_S $6, GDB_FR_REG6(sp) |
| LONG_S $7, GDB_FR_REG7(sp) |
| LONG_S $8, GDB_FR_REG8(sp) |
| LONG_S $9, GDB_FR_REG9(sp) |
| LONG_S $10, GDB_FR_REG10(sp) |
| LONG_S $11, GDB_FR_REG11(sp) |
| LONG_S $12, GDB_FR_REG12(sp) |
| LONG_S $13, GDB_FR_REG13(sp) |
| LONG_S $14, GDB_FR_REG14(sp) |
| LONG_S $15, GDB_FR_REG15(sp) |
| LONG_S $16, GDB_FR_REG16(sp) |
| LONG_S $17, GDB_FR_REG17(sp) |
| LONG_S $18, GDB_FR_REG18(sp) |
| LONG_S $19, GDB_FR_REG19(sp) |
| LONG_S $20, GDB_FR_REG20(sp) |
| LONG_S $21, GDB_FR_REG21(sp) |
| LONG_S $22, GDB_FR_REG22(sp) |
| LONG_S $23, GDB_FR_REG23(sp) |
| LONG_S $24, GDB_FR_REG24(sp) |
| LONG_S $25, GDB_FR_REG25(sp) |
| LONG_S $26, GDB_FR_REG26(sp) |
| LONG_S $27, GDB_FR_REG27(sp) |
| LONG_S $28, GDB_FR_REG28(sp) |
| /* sp already saved */ |
| LONG_S $30, GDB_FR_REG30(sp) |
| LONG_S $31, GDB_FR_REG31(sp) |
| |
| CLI /* disable interrupts */ |
| |
| /* |
| * Followed by the floating point registers |
| */ |
| mfc0 v0, CP0_STATUS /* FPU enabled? */ |
| srl v0, v0, 16 |
| andi v0, v0, (ST0_CU1 >> 16) |
| |
| beqz v0,2f /* disabled, skip */ |
| nop |
| |
| SDC1 $0, GDB_FR_FPR0(sp) |
| SDC1 $1, GDB_FR_FPR1(sp) |
| SDC1 $2, GDB_FR_FPR2(sp) |
| SDC1 $3, GDB_FR_FPR3(sp) |
| SDC1 $4, GDB_FR_FPR4(sp) |
| SDC1 $5, GDB_FR_FPR5(sp) |
| SDC1 $6, GDB_FR_FPR6(sp) |
| SDC1 $7, GDB_FR_FPR7(sp) |
| SDC1 $8, GDB_FR_FPR8(sp) |
| SDC1 $9, GDB_FR_FPR9(sp) |
| SDC1 $10, GDB_FR_FPR10(sp) |
| SDC1 $11, GDB_FR_FPR11(sp) |
| SDC1 $12, GDB_FR_FPR12(sp) |
| SDC1 $13, GDB_FR_FPR13(sp) |
| SDC1 $14, GDB_FR_FPR14(sp) |
| SDC1 $15, GDB_FR_FPR15(sp) |
| SDC1 $16, GDB_FR_FPR16(sp) |
| SDC1 $17, GDB_FR_FPR17(sp) |
| SDC1 $18, GDB_FR_FPR18(sp) |
| SDC1 $19, GDB_FR_FPR19(sp) |
| SDC1 $20, GDB_FR_FPR20(sp) |
| SDC1 $21, GDB_FR_FPR21(sp) |
| SDC1 $22, GDB_FR_FPR22(sp) |
| SDC1 $23, GDB_FR_FPR23(sp) |
| SDC1 $24, GDB_FR_FPR24(sp) |
| SDC1 $25, GDB_FR_FPR25(sp) |
| SDC1 $26, GDB_FR_FPR26(sp) |
| SDC1 $27, GDB_FR_FPR27(sp) |
| SDC1 $28, GDB_FR_FPR28(sp) |
| SDC1 $29, GDB_FR_FPR29(sp) |
| SDC1 $30, GDB_FR_FPR30(sp) |
| SDC1 $31, GDB_FR_FPR31(sp) |
| |
| /* |
| * FPU control registers |
| */ |
| |
| cfc1 v0, CP1_STATUS |
| LONG_S v0, GDB_FR_FSR(sp) |
| cfc1 v0, CP1_REVISION |
| LONG_S v0, GDB_FR_FIR(sp) |
| |
| /* |
| * Current stack frame ptr |
| */ |
| |
| 2: |
| LONG_S sp, GDB_FR_FRP(sp) |
| |
| /* |
| * CP0 registers (R4000/R4400 unused registers skipped) |
| */ |
| |
| mfc0 v0, CP0_INDEX |
| LONG_S v0, GDB_FR_CP0_INDEX(sp) |
| mfc0 v0, CP0_RANDOM |
| LONG_S v0, GDB_FR_CP0_RANDOM(sp) |
| DMFC0 v0, CP0_ENTRYLO0 |
| LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp) |
| DMFC0 v0, CP0_ENTRYLO1 |
| LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp) |
| DMFC0 v0, CP0_CONTEXT |
| LONG_S v0, GDB_FR_CP0_CONTEXT(sp) |
| mfc0 v0, CP0_PAGEMASK |
| LONG_S v0, GDB_FR_CP0_PAGEMASK(sp) |
| mfc0 v0, CP0_WIRED |
| LONG_S v0, GDB_FR_CP0_WIRED(sp) |
| DMFC0 v0, CP0_ENTRYHI |
| LONG_S v0, GDB_FR_CP0_ENTRYHI(sp) |
| mfc0 v0, CP0_PRID |
| LONG_S v0, GDB_FR_CP0_PRID(sp) |
| |
| .set at |
| |
| /* |
| * Continue with the higher level handler |
| */ |
| |
| move a0,sp |
| |
| jal handle_exception |
| nop |
| |
| /* |
| * Restore all writable registers, in reverse order |
| */ |
| |
| .set noat |
| |
| LONG_L v0, GDB_FR_CP0_ENTRYHI(sp) |
| LONG_L v1, GDB_FR_CP0_WIRED(sp) |
| DMTC0 v0, CP0_ENTRYHI |
| mtc0 v1, CP0_WIRED |
| LONG_L v0, GDB_FR_CP0_PAGEMASK(sp) |
| LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp) |
| mtc0 v0, CP0_PAGEMASK |
| DMTC0 v1, CP0_ENTRYLO1 |
| LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp) |
| LONG_L v1, GDB_FR_CP0_INDEX(sp) |
| DMTC0 v0, CP0_ENTRYLO0 |
| LONG_L v0, GDB_FR_CP0_CONTEXT(sp) |
| mtc0 v1, CP0_INDEX |
| DMTC0 v0, CP0_CONTEXT |
| |
| |
| /* |
| * Next, the floating point registers |
| */ |
| mfc0 v0, CP0_STATUS /* check if the FPU is enabled */ |
| srl v0, v0, 16 |
| andi v0, v0, (ST0_CU1 >> 16) |
| |
| beqz v0, 3f /* disabled, skip */ |
| nop |
| |
| LDC1 $31, GDB_FR_FPR31(sp) |
| LDC1 $30, GDB_FR_FPR30(sp) |
| LDC1 $29, GDB_FR_FPR29(sp) |
| LDC1 $28, GDB_FR_FPR28(sp) |
| LDC1 $27, GDB_FR_FPR27(sp) |
| LDC1 $26, GDB_FR_FPR26(sp) |
| LDC1 $25, GDB_FR_FPR25(sp) |
| LDC1 $24, GDB_FR_FPR24(sp) |
| LDC1 $23, GDB_FR_FPR23(sp) |
| LDC1 $22, GDB_FR_FPR22(sp) |
| LDC1 $21, GDB_FR_FPR21(sp) |
| LDC1 $20, GDB_FR_FPR20(sp) |
| LDC1 $19, GDB_FR_FPR19(sp) |
| LDC1 $18, GDB_FR_FPR18(sp) |
| LDC1 $17, GDB_FR_FPR17(sp) |
| LDC1 $16, GDB_FR_FPR16(sp) |
| LDC1 $15, GDB_FR_FPR15(sp) |
| LDC1 $14, GDB_FR_FPR14(sp) |
| LDC1 $13, GDB_FR_FPR13(sp) |
| LDC1 $12, GDB_FR_FPR12(sp) |
| LDC1 $11, GDB_FR_FPR11(sp) |
| LDC1 $10, GDB_FR_FPR10(sp) |
| LDC1 $9, GDB_FR_FPR9(sp) |
| LDC1 $8, GDB_FR_FPR8(sp) |
| LDC1 $7, GDB_FR_FPR7(sp) |
| LDC1 $6, GDB_FR_FPR6(sp) |
| LDC1 $5, GDB_FR_FPR5(sp) |
| LDC1 $4, GDB_FR_FPR4(sp) |
| LDC1 $3, GDB_FR_FPR3(sp) |
| LDC1 $2, GDB_FR_FPR2(sp) |
| LDC1 $1, GDB_FR_FPR1(sp) |
| LDC1 $0, GDB_FR_FPR0(sp) |
| |
| /* |
| * Now the CP0 and integer registers |
| */ |
| |
| 3: |
| #ifdef CONFIG_MIPS_MT_SMTC |
| /* Read-modify write of Status must be atomic */ |
| mfc0 t2, CP0_TCSTATUS |
| ori t1, t2, TCSTATUS_IXMT |
| mtc0 t1, CP0_TCSTATUS |
| andi t2, t2, TCSTATUS_IXMT |
| ehb |
| DMT 9 # dmt t1 |
| jal mips_ihb |
| nop |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| mfc0 t0, CP0_STATUS |
| ori t0, 0x1f |
| xori t0, 0x1f |
| mtc0 t0, CP0_STATUS |
| #ifdef CONFIG_MIPS_MT_SMTC |
| andi t1, t1, VPECONTROL_TE |
| beqz t1, 9f |
| nop |
| EMT # emt |
| 9: |
| mfc0 t1, CP0_TCSTATUS |
| xori t1, t1, TCSTATUS_IXMT |
| or t1, t1, t2 |
| mtc0 t1, CP0_TCSTATUS |
| ehb |
| #endif /* CONFIG_MIPS_MT_SMTC */ |
| LONG_L v0, GDB_FR_STATUS(sp) |
| LONG_L v1, GDB_FR_EPC(sp) |
| mtc0 v0, CP0_STATUS |
| DMTC0 v1, CP0_EPC |
| LONG_L v0, GDB_FR_HI(sp) |
| LONG_L v1, GDB_FR_LO(sp) |
| mthi v0 |
| mtlo v1 |
| LONG_L $31, GDB_FR_REG31(sp) |
| LONG_L $30, GDB_FR_REG30(sp) |
| LONG_L $28, GDB_FR_REG28(sp) |
| LONG_L $27, GDB_FR_REG27(sp) |
| LONG_L $26, GDB_FR_REG26(sp) |
| LONG_L $25, GDB_FR_REG25(sp) |
| LONG_L $24, GDB_FR_REG24(sp) |
| LONG_L $23, GDB_FR_REG23(sp) |
| LONG_L $22, GDB_FR_REG22(sp) |
| LONG_L $21, GDB_FR_REG21(sp) |
| LONG_L $20, GDB_FR_REG20(sp) |
| LONG_L $19, GDB_FR_REG19(sp) |
| LONG_L $18, GDB_FR_REG18(sp) |
| LONG_L $17, GDB_FR_REG17(sp) |
| LONG_L $16, GDB_FR_REG16(sp) |
| LONG_L $15, GDB_FR_REG15(sp) |
| LONG_L $14, GDB_FR_REG14(sp) |
| LONG_L $13, GDB_FR_REG13(sp) |
| LONG_L $12, GDB_FR_REG12(sp) |
| LONG_L $11, GDB_FR_REG11(sp) |
| LONG_L $10, GDB_FR_REG10(sp) |
| LONG_L $9, GDB_FR_REG9(sp) |
| LONG_L $8, GDB_FR_REG8(sp) |
| LONG_L $7, GDB_FR_REG7(sp) |
| LONG_L $6, GDB_FR_REG6(sp) |
| LONG_L $5, GDB_FR_REG5(sp) |
| LONG_L $4, GDB_FR_REG4(sp) |
| LONG_L $3, GDB_FR_REG3(sp) |
| LONG_L $2, GDB_FR_REG2(sp) |
| LONG_L $1, GDB_FR_REG1(sp) |
| #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) |
| LONG_L k0, GDB_FR_EPC(sp) |
| LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */ |
| jr k0 |
| rfe |
| #else |
| LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */ |
| |
| .set mips3 |
| eret |
| .set mips0 |
| #endif |
| .set at |
| .set reorder |
| END(trap_low) |
| |
| LEAF(kgdb_read_byte) |
| 4: lb t0, (a0) |
| sb t0, (a1) |
| li v0, 0 |
| jr ra |
| .section __ex_table,"a" |
| PTR 4b, kgdbfault |
| .previous |
| END(kgdb_read_byte) |
| |
| LEAF(kgdb_write_byte) |
| 5: sb a0, (a1) |
| li v0, 0 |
| jr ra |
| .section __ex_table,"a" |
| PTR 5b, kgdbfault |
| .previous |
| END(kgdb_write_byte) |
| |
| .type kgdbfault@function |
| .ent kgdbfault |
| |
| kgdbfault: li v0, -EFAULT |
| jr ra |
| .end kgdbfault |