| |
| /* |
| * Linux device driver for PCI based Prism54 |
| * |
| * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> |
| * |
| * Based on the islsm (softmac prism54) driver, which is: |
| * Copyright 2004-2006 Jean-Baptiste Note <jean-baptiste.note@m4x.org>, et al. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/firmware.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| #include <linux/completion.h> |
| #include <net/mac80211.h> |
| |
| #include "p54.h" |
| #include "p54pci.h" |
| |
| MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); |
| MODULE_DESCRIPTION("Prism54 PCI wireless driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("prism54pci"); |
| |
| static struct pci_device_id p54p_table[] __devinitdata = { |
| /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ |
| { PCI_DEVICE(0x1260, 0x3890) }, |
| /* 3COM 3CRWE154G72 Wireless LAN adapter */ |
| { PCI_DEVICE(0x10b7, 0x6001) }, |
| /* Intersil PRISM Indigo Wireless LAN adapter */ |
| { PCI_DEVICE(0x1260, 0x3877) }, |
| /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */ |
| { PCI_DEVICE(0x1260, 0x3886) }, |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, p54p_table); |
| |
| static int p54p_upload_firmware(struct ieee80211_hw *dev) |
| { |
| struct p54p_priv *priv = dev->priv; |
| const struct firmware *fw_entry = NULL; |
| __le32 reg; |
| int err; |
| u32 *data; |
| u32 remains, left, device_addr; |
| |
| P54P_WRITE(int_enable, 0); |
| P54P_READ(int_enable); |
| udelay(10); |
| |
| reg = P54P_READ(ctrl_stat); |
| reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT); |
| P54P_WRITE(ctrl_stat, reg); |
| P54P_READ(ctrl_stat); |
| udelay(10); |
| |
| reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); |
| P54P_WRITE(ctrl_stat, reg); |
| wmb(); |
| udelay(10); |
| |
| reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| P54P_WRITE(ctrl_stat, reg); |
| wmb(); |
| |
| mdelay(50); |
| |
| err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev); |
| if (err) { |
| printk(KERN_ERR "%s (prism54pci): cannot find firmware " |
| "(isl3886)\n", pci_name(priv->pdev)); |
| return err; |
| } |
| |
| p54_parse_firmware(dev, fw_entry); |
| |
| data = (u32 *) fw_entry->data; |
| remains = fw_entry->size; |
| device_addr = ISL38XX_DEV_FIRMWARE_ADDR; |
| while (remains) { |
| u32 i = 0; |
| left = min((u32)0x1000, remains); |
| P54P_WRITE(direct_mem_base, cpu_to_le32(device_addr)); |
| P54P_READ(int_enable); |
| |
| device_addr += 0x1000; |
| while (i < left) { |
| P54P_WRITE(direct_mem_win[i], *data++); |
| i += sizeof(u32); |
| } |
| |
| remains -= left; |
| P54P_READ(int_enable); |
| } |
| |
| release_firmware(fw_entry); |
| |
| reg = P54P_READ(ctrl_stat); |
| reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN); |
| reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT); |
| P54P_WRITE(ctrl_stat, reg); |
| P54P_READ(ctrl_stat); |
| udelay(10); |
| |
| reg |= cpu_to_le32(ISL38XX_CTRL_STAT_RESET); |
| P54P_WRITE(ctrl_stat, reg); |
| wmb(); |
| udelay(10); |
| |
| reg &= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET); |
| P54P_WRITE(ctrl_stat, reg); |
| wmb(); |
| udelay(10); |
| |
| return 0; |
| } |
| |
| static irqreturn_t p54p_simple_interrupt(int irq, void *dev_id) |
| { |
| struct p54p_priv *priv = (struct p54p_priv *) dev_id; |
| __le32 reg; |
| |
| reg = P54P_READ(int_ident); |
| P54P_WRITE(int_ack, reg); |
| |
| if (reg & P54P_READ(int_enable)) |
| complete(&priv->boot_comp); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int p54p_read_eeprom(struct ieee80211_hw *dev) |
| { |
| struct p54p_priv *priv = dev->priv; |
| int err; |
| struct p54_control_hdr *hdr; |
| void *eeprom; |
| dma_addr_t rx_mapping, tx_mapping; |
| u16 alen; |
| |
| init_completion(&priv->boot_comp); |
| err = request_irq(priv->pdev->irq, &p54p_simple_interrupt, |
| IRQF_SHARED, "prism54pci", priv); |
| if (err) { |
| printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n", |
| pci_name(priv->pdev)); |
| return err; |
| } |
| |
| eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL); |
| if (!eeprom) { |
| printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n", |
| pci_name(priv->pdev)); |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| memset(priv->ring_control, 0, sizeof(*priv->ring_control)); |
| P54P_WRITE(ring_control_base, priv->ring_control_dma); |
| P54P_READ(ring_control_base); |
| udelay(10); |
| |
| P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); |
| P54P_READ(int_enable); |
| udelay(10); |
| |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); |
| |
| if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { |
| printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n", |
| pci_name(priv->pdev)); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); |
| P54P_READ(int_enable); |
| |
| hdr = eeprom + 0x2010; |
| p54_fill_eeprom_readback(hdr); |
| hdr->req_id = cpu_to_le32(priv->common.rx_start); |
| |
| rx_mapping = pci_map_single(priv->pdev, eeprom, |
| 0x2010, PCI_DMA_FROMDEVICE); |
| tx_mapping = pci_map_single(priv->pdev, (void *)hdr, |
| EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); |
| |
| priv->ring_control->rx_mgmt[0].host_addr = cpu_to_le32(rx_mapping); |
| priv->ring_control->rx_mgmt[0].len = cpu_to_le16(0x2010); |
| priv->ring_control->tx_data[0].host_addr = cpu_to_le32(tx_mapping); |
| priv->ring_control->tx_data[0].device_addr = hdr->req_id; |
| priv->ring_control->tx_data[0].len = cpu_to_le16(EEPROM_READBACK_LEN); |
| |
| priv->ring_control->host_idx[2] = cpu_to_le32(1); |
| priv->ring_control->host_idx[1] = cpu_to_le32(1); |
| |
| wmb(); |
| mdelay(100); |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); |
| |
| wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); |
| wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ); |
| |
| pci_unmap_single(priv->pdev, tx_mapping, |
| EEPROM_READBACK_LEN, PCI_DMA_TODEVICE); |
| pci_unmap_single(priv->pdev, rx_mapping, |
| 0x2010, PCI_DMA_FROMDEVICE); |
| |
| alen = le16_to_cpu(priv->ring_control->rx_mgmt[0].len); |
| if (le32_to_cpu(priv->ring_control->device_idx[2]) != 1 || |
| alen < 0x10) { |
| printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n", |
| pci_name(priv->pdev)); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| p54_parse_eeprom(dev, (u8 *)eeprom + 0x10, alen - 0x10); |
| |
| out: |
| kfree(eeprom); |
| P54P_WRITE(int_enable, 0); |
| P54P_READ(int_enable); |
| udelay(10); |
| free_irq(priv->pdev->irq, priv); |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); |
| return err; |
| } |
| |
| static void p54p_refill_rx_ring(struct ieee80211_hw *dev) |
| { |
| struct p54p_priv *priv = dev->priv; |
| u32 limit, host_idx, idx; |
| |
| host_idx = le32_to_cpu(priv->ring_control->host_idx[0]); |
| limit = host_idx; |
| limit -= le32_to_cpu(priv->ring_control->device_idx[0]); |
| limit = ARRAY_SIZE(priv->ring_control->rx_data) - limit; |
| |
| idx = host_idx % ARRAY_SIZE(priv->ring_control->rx_data); |
| while (limit-- > 1) { |
| struct p54p_desc *desc = &priv->ring_control->rx_data[idx]; |
| |
| if (!desc->host_addr) { |
| struct sk_buff *skb; |
| dma_addr_t mapping; |
| skb = dev_alloc_skb(MAX_RX_SIZE); |
| if (!skb) |
| break; |
| |
| mapping = pci_map_single(priv->pdev, |
| skb_tail_pointer(skb), |
| MAX_RX_SIZE, |
| PCI_DMA_FROMDEVICE); |
| desc->host_addr = cpu_to_le32(mapping); |
| desc->device_addr = 0; // FIXME: necessary? |
| desc->len = cpu_to_le16(MAX_RX_SIZE); |
| desc->flags = 0; |
| priv->rx_buf[idx] = skb; |
| } |
| |
| idx++; |
| host_idx++; |
| idx %= ARRAY_SIZE(priv->ring_control->rx_data); |
| } |
| |
| wmb(); |
| priv->ring_control->host_idx[0] = cpu_to_le32(host_idx); |
| } |
| |
| static irqreturn_t p54p_interrupt(int irq, void *dev_id) |
| { |
| struct ieee80211_hw *dev = dev_id; |
| struct p54p_priv *priv = dev->priv; |
| __le32 reg; |
| |
| spin_lock(&priv->lock); |
| reg = P54P_READ(int_ident); |
| if (unlikely(reg == 0xFFFFFFFF)) { |
| spin_unlock(&priv->lock); |
| return IRQ_HANDLED; |
| } |
| |
| P54P_WRITE(int_ack, reg); |
| |
| reg &= P54P_READ(int_enable); |
| |
| if (reg & cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)) { |
| struct p54p_desc *desc; |
| u32 idx, i; |
| i = priv->tx_idx; |
| i %= ARRAY_SIZE(priv->ring_control->tx_data); |
| priv->tx_idx = idx = le32_to_cpu(priv->ring_control->device_idx[1]); |
| idx %= ARRAY_SIZE(priv->ring_control->tx_data); |
| |
| while (i != idx) { |
| desc = &priv->ring_control->tx_data[i]; |
| if (priv->tx_buf[i]) { |
| kfree(priv->tx_buf[i]); |
| priv->tx_buf[i] = NULL; |
| } |
| |
| pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), |
| le16_to_cpu(desc->len), PCI_DMA_TODEVICE); |
| |
| desc->host_addr = 0; |
| desc->device_addr = 0; |
| desc->len = 0; |
| desc->flags = 0; |
| |
| i++; |
| i %= ARRAY_SIZE(priv->ring_control->tx_data); |
| } |
| |
| i = priv->rx_idx; |
| i %= ARRAY_SIZE(priv->ring_control->rx_data); |
| priv->rx_idx = idx = le32_to_cpu(priv->ring_control->device_idx[0]); |
| idx %= ARRAY_SIZE(priv->ring_control->rx_data); |
| while (i != idx) { |
| u16 len; |
| struct sk_buff *skb; |
| desc = &priv->ring_control->rx_data[i]; |
| len = le16_to_cpu(desc->len); |
| skb = priv->rx_buf[i]; |
| |
| skb_put(skb, len); |
| |
| if (p54_rx(dev, skb)) { |
| pci_unmap_single(priv->pdev, |
| le32_to_cpu(desc->host_addr), |
| MAX_RX_SIZE, PCI_DMA_FROMDEVICE); |
| |
| priv->rx_buf[i] = NULL; |
| desc->host_addr = 0; |
| } else { |
| skb_trim(skb, 0); |
| desc->len = cpu_to_le16(MAX_RX_SIZE); |
| } |
| |
| i++; |
| i %= ARRAY_SIZE(priv->ring_control->rx_data); |
| } |
| |
| p54p_refill_rx_ring(dev); |
| |
| wmb(); |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); |
| } else if (reg & cpu_to_le32(ISL38XX_INT_IDENT_INIT)) |
| complete(&priv->boot_comp); |
| |
| spin_unlock(&priv->lock); |
| |
| return reg ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data, |
| size_t len, int free_on_tx) |
| { |
| struct p54p_priv *priv = dev->priv; |
| unsigned long flags; |
| struct p54p_desc *desc; |
| dma_addr_t mapping; |
| u32 device_idx, idx, i; |
| |
| spin_lock_irqsave(&priv->lock, flags); |
| |
| device_idx = le32_to_cpu(priv->ring_control->device_idx[1]); |
| idx = le32_to_cpu(priv->ring_control->host_idx[1]); |
| i = idx % ARRAY_SIZE(priv->ring_control->tx_data); |
| |
| mapping = pci_map_single(priv->pdev, data, len, PCI_DMA_TODEVICE); |
| desc = &priv->ring_control->tx_data[i]; |
| desc->host_addr = cpu_to_le32(mapping); |
| desc->device_addr = data->req_id; |
| desc->len = cpu_to_le16(len); |
| desc->flags = 0; |
| |
| wmb(); |
| priv->ring_control->host_idx[1] = cpu_to_le32(idx + 1); |
| |
| if (free_on_tx) |
| priv->tx_buf[i] = data; |
| |
| spin_unlock_irqrestore(&priv->lock, flags); |
| |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); |
| P54P_READ(dev_int); |
| |
| /* FIXME: unlikely to happen because the device usually runs out of |
| memory before we fill the ring up, but we can make it impossible */ |
| if (idx - device_idx > ARRAY_SIZE(priv->ring_control->tx_data) - 2) |
| printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy)); |
| } |
| |
| static int p54p_open(struct ieee80211_hw *dev) |
| { |
| struct p54p_priv *priv = dev->priv; |
| int err; |
| |
| init_completion(&priv->boot_comp); |
| err = request_irq(priv->pdev->irq, &p54p_interrupt, |
| IRQF_SHARED, "prism54pci", dev); |
| if (err) { |
| printk(KERN_ERR "%s: failed to register IRQ handler\n", |
| wiphy_name(dev->wiphy)); |
| return err; |
| } |
| |
| memset(priv->ring_control, 0, sizeof(*priv->ring_control)); |
| priv->rx_idx = priv->tx_idx = 0; |
| p54p_refill_rx_ring(dev); |
| |
| p54p_upload_firmware(dev); |
| |
| P54P_WRITE(ring_control_base, priv->ring_control_dma); |
| P54P_READ(ring_control_base); |
| wmb(); |
| udelay(10); |
| |
| P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT)); |
| P54P_READ(int_enable); |
| wmb(); |
| udelay(10); |
| |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); |
| P54P_READ(dev_int); |
| |
| if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) { |
| printk(KERN_ERR "%s: Cannot boot firmware!\n", |
| wiphy_name(dev->wiphy)); |
| free_irq(priv->pdev->irq, dev); |
| return -ETIMEDOUT; |
| } |
| |
| P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE)); |
| P54P_READ(int_enable); |
| wmb(); |
| udelay(10); |
| |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); |
| P54P_READ(dev_int); |
| wmb(); |
| udelay(10); |
| |
| return 0; |
| } |
| |
| static void p54p_stop(struct ieee80211_hw *dev) |
| { |
| struct p54p_priv *priv = dev->priv; |
| unsigned int i; |
| struct p54p_desc *desc; |
| |
| P54P_WRITE(int_enable, 0); |
| P54P_READ(int_enable); |
| udelay(10); |
| |
| free_irq(priv->pdev->irq, dev); |
| |
| P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET)); |
| |
| for (i = 0; i < ARRAY_SIZE(priv->rx_buf); i++) { |
| desc = &priv->ring_control->rx_data[i]; |
| if (desc->host_addr) |
| pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), |
| MAX_RX_SIZE, PCI_DMA_FROMDEVICE); |
| kfree_skb(priv->rx_buf[i]); |
| priv->rx_buf[i] = NULL; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(priv->tx_buf); i++) { |
| desc = &priv->ring_control->tx_data[i]; |
| if (desc->host_addr) |
| pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr), |
| le16_to_cpu(desc->len), PCI_DMA_TODEVICE); |
| |
| kfree(priv->tx_buf[i]); |
| priv->tx_buf[i] = NULL; |
| } |
| |
| memset(priv->ring_control, 0, sizeof(*priv->ring_control)); |
| } |
| |
| static int __devinit p54p_probe(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct p54p_priv *priv; |
| struct ieee80211_hw *dev; |
| unsigned long mem_addr, mem_len; |
| int err; |
| DECLARE_MAC_BUF(mac); |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| printk(KERN_ERR "%s (prism54pci): Cannot enable new PCI device\n", |
| pci_name(pdev)); |
| return err; |
| } |
| |
| mem_addr = pci_resource_start(pdev, 0); |
| mem_len = pci_resource_len(pdev, 0); |
| if (mem_len < sizeof(struct p54p_csr)) { |
| printk(KERN_ERR "%s (prism54pci): Too short PCI resources\n", |
| pci_name(pdev)); |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| err = pci_request_regions(pdev, "prism54pci"); |
| if (err) { |
| printk(KERN_ERR "%s (prism54pci): Cannot obtain PCI resources\n", |
| pci_name(pdev)); |
| return err; |
| } |
| |
| if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || |
| pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) { |
| printk(KERN_ERR "%s (prism54pci): No suitable DMA available\n", |
| pci_name(pdev)); |
| goto err_free_reg; |
| } |
| |
| pci_set_master(pdev); |
| pci_try_set_mwi(pdev); |
| |
| pci_write_config_byte(pdev, 0x40, 0); |
| pci_write_config_byte(pdev, 0x41, 0); |
| |
| dev = p54_init_common(sizeof(*priv)); |
| if (!dev) { |
| printk(KERN_ERR "%s (prism54pci): ieee80211 alloc failed\n", |
| pci_name(pdev)); |
| err = -ENOMEM; |
| goto err_free_reg; |
| } |
| |
| priv = dev->priv; |
| priv->pdev = pdev; |
| |
| SET_IEEE80211_DEV(dev, &pdev->dev); |
| pci_set_drvdata(pdev, dev); |
| |
| priv->map = ioremap(mem_addr, mem_len); |
| if (!priv->map) { |
| printk(KERN_ERR "%s (prism54pci): Cannot map device memory\n", |
| pci_name(pdev)); |
| err = -EINVAL; // TODO: use a better error code? |
| goto err_free_dev; |
| } |
| |
| priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control), |
| &priv->ring_control_dma); |
| if (!priv->ring_control) { |
| printk(KERN_ERR "%s (prism54pci): Cannot allocate rings\n", |
| pci_name(pdev)); |
| err = -ENOMEM; |
| goto err_iounmap; |
| } |
| memset(priv->ring_control, 0, sizeof(*priv->ring_control)); |
| |
| err = p54p_upload_firmware(dev); |
| if (err) |
| goto err_free_desc; |
| |
| err = p54p_read_eeprom(dev); |
| if (err) |
| goto err_free_desc; |
| |
| priv->common.open = p54p_open; |
| priv->common.stop = p54p_stop; |
| priv->common.tx = p54p_tx; |
| |
| spin_lock_init(&priv->lock); |
| |
| err = ieee80211_register_hw(dev); |
| if (err) { |
| printk(KERN_ERR "%s (prism54pci): Cannot register netdevice\n", |
| pci_name(pdev)); |
| goto err_free_common; |
| } |
| |
| printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n", |
| wiphy_name(dev->wiphy), |
| print_mac(mac, dev->wiphy->perm_addr), |
| priv->common.version); |
| |
| return 0; |
| |
| err_free_common: |
| p54_free_common(dev); |
| |
| err_free_desc: |
| pci_free_consistent(pdev, sizeof(*priv->ring_control), |
| priv->ring_control, priv->ring_control_dma); |
| |
| err_iounmap: |
| iounmap(priv->map); |
| |
| err_free_dev: |
| pci_set_drvdata(pdev, NULL); |
| ieee80211_free_hw(dev); |
| |
| err_free_reg: |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| static void __devexit p54p_remove(struct pci_dev *pdev) |
| { |
| struct ieee80211_hw *dev = pci_get_drvdata(pdev); |
| struct p54p_priv *priv; |
| |
| if (!dev) |
| return; |
| |
| ieee80211_unregister_hw(dev); |
| priv = dev->priv; |
| pci_free_consistent(pdev, sizeof(*priv->ring_control), |
| priv->ring_control, priv->ring_control_dma); |
| p54_free_common(dev); |
| iounmap(priv->map); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| ieee80211_free_hw(dev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int p54p_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct ieee80211_hw *dev = pci_get_drvdata(pdev); |
| struct p54p_priv *priv = dev->priv; |
| |
| if (priv->common.mode != IEEE80211_IF_TYPE_MGMT) { |
| ieee80211_stop_queues(dev); |
| p54p_stop(dev); |
| } |
| |
| pci_save_state(pdev); |
| pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| return 0; |
| } |
| |
| static int p54p_resume(struct pci_dev *pdev) |
| { |
| struct ieee80211_hw *dev = pci_get_drvdata(pdev); |
| struct p54p_priv *priv = dev->priv; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| if (priv->common.mode != IEEE80211_IF_TYPE_MGMT) { |
| p54p_open(dev); |
| ieee80211_start_queues(dev); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static struct pci_driver p54p_driver = { |
| .name = "prism54pci", |
| .id_table = p54p_table, |
| .probe = p54p_probe, |
| .remove = __devexit_p(p54p_remove), |
| #ifdef CONFIG_PM |
| .suspend = p54p_suspend, |
| .resume = p54p_resume, |
| #endif /* CONFIG_PM */ |
| }; |
| |
| static int __init p54p_init(void) |
| { |
| return pci_register_driver(&p54p_driver); |
| } |
| |
| static void __exit p54p_exit(void) |
| { |
| pci_unregister_driver(&p54p_driver); |
| } |
| |
| module_init(p54p_init); |
| module_exit(p54p_exit); |