| /* |
| * Atmel maXTouch Touchscreen driver |
| * |
| * Copyright (C) 2010 Samsung Electronics Co.Ltd |
| * Copyright (C) 2011-2014 Atmel Corporation |
| * Copyright (C) 2012 Google, Inc. |
| * |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/atmel_mxt_ts.h> |
| #include <linux/input/mt.h> |
| #include <linux/interrupt.h> |
| #include <linux/of.h> |
| #include <linux/slab.h> |
| |
| /* Version */ |
| #define MXT_VER_20 20 |
| #define MXT_VER_21 21 |
| #define MXT_VER_22 22 |
| |
| /* Firmware files */ |
| #define MXT_FW_NAME "maxtouch.fw" |
| #define MXT_CFG_NAME "maxtouch.cfg" |
| #define MXT_CFG_MAGIC "OBP_RAW V1" |
| |
| /* Registers */ |
| #define MXT_INFO 0x00 |
| #define MXT_FAMILY_ID 0x00 |
| #define MXT_VARIANT_ID 0x01 |
| #define MXT_VERSION 0x02 |
| #define MXT_BUILD 0x03 |
| #define MXT_MATRIX_X_SIZE 0x04 |
| #define MXT_MATRIX_Y_SIZE 0x05 |
| #define MXT_OBJECT_NUM 0x06 |
| #define MXT_OBJECT_START 0x07 |
| |
| #define MXT_OBJECT_SIZE 6 |
| #define MXT_INFO_CHECKSUM_SIZE 3 |
| #define MXT_MAX_BLOCK_WRITE 256 |
| |
| /* Object types */ |
| #define MXT_DEBUG_DIAGNOSTIC_T37 37 |
| #define MXT_GEN_MESSAGE_T5 5 |
| #define MXT_GEN_COMMAND_T6 6 |
| #define MXT_GEN_POWER_T7 7 |
| #define MXT_GEN_ACQUIRE_T8 8 |
| #define MXT_GEN_DATASOURCE_T53 53 |
| #define MXT_TOUCH_MULTI_T9 9 |
| #define MXT_TOUCH_KEYARRAY_T15 15 |
| #define MXT_TOUCH_PROXIMITY_T23 23 |
| #define MXT_TOUCH_PROXKEY_T52 52 |
| #define MXT_PROCI_GRIPFACE_T20 20 |
| #define MXT_PROCG_NOISE_T22 22 |
| #define MXT_PROCI_ONETOUCH_T24 24 |
| #define MXT_PROCI_TWOTOUCH_T27 27 |
| #define MXT_PROCI_GRIP_T40 40 |
| #define MXT_PROCI_PALM_T41 41 |
| #define MXT_PROCI_TOUCHSUPPRESSION_T42 42 |
| #define MXT_PROCI_STYLUS_T47 47 |
| #define MXT_PROCG_NOISESUPPRESSION_T48 48 |
| #define MXT_SPT_COMMSCONFIG_T18 18 |
| #define MXT_SPT_GPIOPWM_T19 19 |
| #define MXT_SPT_SELFTEST_T25 25 |
| #define MXT_SPT_CTECONFIG_T28 28 |
| #define MXT_SPT_USERDATA_T38 38 |
| #define MXT_SPT_DIGITIZER_T43 43 |
| #define MXT_SPT_MESSAGECOUNT_T44 44 |
| #define MXT_SPT_CTECONFIG_T46 46 |
| |
| /* MXT_GEN_MESSAGE_T5 object */ |
| #define MXT_RPTID_NOMSG 0xff |
| |
| /* MXT_GEN_COMMAND_T6 field */ |
| #define MXT_COMMAND_RESET 0 |
| #define MXT_COMMAND_BACKUPNV 1 |
| #define MXT_COMMAND_CALIBRATE 2 |
| #define MXT_COMMAND_REPORTALL 3 |
| #define MXT_COMMAND_DIAGNOSTIC 5 |
| |
| /* Define for T6 status byte */ |
| #define MXT_T6_STATUS_RESET (1 << 7) |
| #define MXT_T6_STATUS_OFL (1 << 6) |
| #define MXT_T6_STATUS_SIGERR (1 << 5) |
| #define MXT_T6_STATUS_CAL (1 << 4) |
| #define MXT_T6_STATUS_CFGERR (1 << 3) |
| #define MXT_T6_STATUS_COMSERR (1 << 2) |
| |
| /* MXT_GEN_POWER_T7 field */ |
| #define MXT_POWER_IDLEACQINT 0 |
| #define MXT_POWER_ACTVACQINT 1 |
| #define MXT_POWER_ACTV2IDLETO 2 |
| |
| /* MXT_GEN_ACQUIRE_T8 field */ |
| #define MXT_ACQUIRE_CHRGTIME 0 |
| #define MXT_ACQUIRE_TCHDRIFT 2 |
| #define MXT_ACQUIRE_DRIFTST 3 |
| #define MXT_ACQUIRE_TCHAUTOCAL 4 |
| #define MXT_ACQUIRE_SYNC 5 |
| #define MXT_ACQUIRE_ATCHCALST 6 |
| #define MXT_ACQUIRE_ATCHCALSTHR 7 |
| |
| /* MXT_TOUCH_MULTI_T9 field */ |
| #define MXT_TOUCH_CTRL 0 |
| #define MXT_T9_ORIENT 9 |
| #define MXT_T9_RANGE 18 |
| |
| /* MXT_TOUCH_MULTI_T9 status */ |
| #define MXT_T9_UNGRIP (1 << 0) |
| #define MXT_T9_SUPPRESS (1 << 1) |
| #define MXT_T9_AMP (1 << 2) |
| #define MXT_T9_VECTOR (1 << 3) |
| #define MXT_T9_MOVE (1 << 4) |
| #define MXT_T9_RELEASE (1 << 5) |
| #define MXT_T9_PRESS (1 << 6) |
| #define MXT_T9_DETECT (1 << 7) |
| |
| struct t9_range { |
| u16 x; |
| u16 y; |
| } __packed; |
| |
| /* MXT_TOUCH_MULTI_T9 orient */ |
| #define MXT_T9_ORIENT_SWITCH (1 << 0) |
| |
| /* MXT_PROCI_GRIPFACE_T20 field */ |
| #define MXT_GRIPFACE_CTRL 0 |
| #define MXT_GRIPFACE_XLOGRIP 1 |
| #define MXT_GRIPFACE_XHIGRIP 2 |
| #define MXT_GRIPFACE_YLOGRIP 3 |
| #define MXT_GRIPFACE_YHIGRIP 4 |
| #define MXT_GRIPFACE_MAXTCHS 5 |
| #define MXT_GRIPFACE_SZTHR1 7 |
| #define MXT_GRIPFACE_SZTHR2 8 |
| #define MXT_GRIPFACE_SHPTHR1 9 |
| #define MXT_GRIPFACE_SHPTHR2 10 |
| #define MXT_GRIPFACE_SUPEXTTO 11 |
| |
| /* MXT_PROCI_NOISE field */ |
| #define MXT_NOISE_CTRL 0 |
| #define MXT_NOISE_OUTFLEN 1 |
| #define MXT_NOISE_GCAFUL_LSB 3 |
| #define MXT_NOISE_GCAFUL_MSB 4 |
| #define MXT_NOISE_GCAFLL_LSB 5 |
| #define MXT_NOISE_GCAFLL_MSB 6 |
| #define MXT_NOISE_ACTVGCAFVALID 7 |
| #define MXT_NOISE_NOISETHR 8 |
| #define MXT_NOISE_FREQHOPSCALE 10 |
| #define MXT_NOISE_FREQ0 11 |
| #define MXT_NOISE_FREQ1 12 |
| #define MXT_NOISE_FREQ2 13 |
| #define MXT_NOISE_FREQ3 14 |
| #define MXT_NOISE_FREQ4 15 |
| #define MXT_NOISE_IDLEGCAFVALID 16 |
| |
| /* MXT_SPT_COMMSCONFIG_T18 */ |
| #define MXT_COMMS_CTRL 0 |
| #define MXT_COMMS_CMD 1 |
| |
| /* MXT_SPT_CTECONFIG_T28 field */ |
| #define MXT_CTE_CTRL 0 |
| #define MXT_CTE_CMD 1 |
| #define MXT_CTE_MODE 2 |
| #define MXT_CTE_IDLEGCAFDEPTH 3 |
| #define MXT_CTE_ACTVGCAFDEPTH 4 |
| #define MXT_CTE_VOLTAGE 5 |
| |
| #define MXT_VOLTAGE_DEFAULT 2700000 |
| #define MXT_VOLTAGE_STEP 10000 |
| |
| /* Define for MXT_GEN_COMMAND_T6 */ |
| #define MXT_BOOT_VALUE 0xa5 |
| #define MXT_RESET_VALUE 0x01 |
| #define MXT_BACKUP_VALUE 0x55 |
| |
| /* Delay times */ |
| #define MXT_BACKUP_TIME 50 /* msec */ |
| #define MXT_RESET_TIME 200 /* msec */ |
| #define MXT_RESET_TIMEOUT 3000 /* msec */ |
| #define MXT_CRC_TIMEOUT 1000 /* msec */ |
| #define MXT_FW_RESET_TIME 3000 /* msec */ |
| #define MXT_FW_CHG_TIMEOUT 300 /* msec */ |
| |
| /* Command to unlock bootloader */ |
| #define MXT_UNLOCK_CMD_MSB 0xaa |
| #define MXT_UNLOCK_CMD_LSB 0xdc |
| |
| /* Bootloader mode status */ |
| #define MXT_WAITING_BOOTLOAD_CMD 0xc0 /* valid 7 6 bit only */ |
| #define MXT_WAITING_FRAME_DATA 0x80 /* valid 7 6 bit only */ |
| #define MXT_FRAME_CRC_CHECK 0x02 |
| #define MXT_FRAME_CRC_FAIL 0x03 |
| #define MXT_FRAME_CRC_PASS 0x04 |
| #define MXT_APP_CRC_FAIL 0x40 /* valid 7 8 bit only */ |
| #define MXT_BOOT_STATUS_MASK 0x3f |
| #define MXT_BOOT_EXTENDED_ID (1 << 5) |
| #define MXT_BOOT_ID_MASK 0x1f |
| |
| /* Touchscreen absolute values */ |
| #define MXT_MAX_AREA 0xff |
| |
| #define MXT_PIXELS_PER_MM 20 |
| |
| struct mxt_info { |
| u8 family_id; |
| u8 variant_id; |
| u8 version; |
| u8 build; |
| u8 matrix_xsize; |
| u8 matrix_ysize; |
| u8 object_num; |
| }; |
| |
| struct mxt_object { |
| u8 type; |
| u16 start_address; |
| u8 size_minus_one; |
| u8 instances_minus_one; |
| u8 num_report_ids; |
| } __packed; |
| |
| /* Each client has this additional data */ |
| struct mxt_data { |
| struct i2c_client *client; |
| struct input_dev *input_dev; |
| char phys[64]; /* device physical location */ |
| const struct mxt_platform_data *pdata; |
| struct mxt_object *object_table; |
| struct mxt_info info; |
| unsigned int irq; |
| unsigned int max_x; |
| unsigned int max_y; |
| bool in_bootloader; |
| u16 mem_size; |
| u8 max_reportid; |
| u32 config_crc; |
| u32 info_crc; |
| u8 bootloader_addr; |
| u8 *msg_buf; |
| u8 t6_status; |
| bool update_input; |
| u8 last_message_count; |
| u8 num_touchids; |
| |
| /* Cached parameters from object table */ |
| u16 T5_address; |
| u8 T5_msg_size; |
| u8 T6_reportid; |
| u16 T6_address; |
| u16 T7_address; |
| u8 T9_reportid_min; |
| u8 T9_reportid_max; |
| u8 T19_reportid; |
| u16 T44_address; |
| |
| /* for fw update in bootloader */ |
| struct completion bl_completion; |
| |
| /* for reset handling */ |
| struct completion reset_completion; |
| |
| /* for config update handling */ |
| struct completion crc_completion; |
| }; |
| |
| static size_t mxt_obj_size(const struct mxt_object *obj) |
| { |
| return obj->size_minus_one + 1; |
| } |
| |
| static size_t mxt_obj_instances(const struct mxt_object *obj) |
| { |
| return obj->instances_minus_one + 1; |
| } |
| |
| static bool mxt_object_readable(unsigned int type) |
| { |
| switch (type) { |
| case MXT_GEN_COMMAND_T6: |
| case MXT_GEN_POWER_T7: |
| case MXT_GEN_ACQUIRE_T8: |
| case MXT_GEN_DATASOURCE_T53: |
| case MXT_TOUCH_MULTI_T9: |
| case MXT_TOUCH_KEYARRAY_T15: |
| case MXT_TOUCH_PROXIMITY_T23: |
| case MXT_TOUCH_PROXKEY_T52: |
| case MXT_PROCI_GRIPFACE_T20: |
| case MXT_PROCG_NOISE_T22: |
| case MXT_PROCI_ONETOUCH_T24: |
| case MXT_PROCI_TWOTOUCH_T27: |
| case MXT_PROCI_GRIP_T40: |
| case MXT_PROCI_PALM_T41: |
| case MXT_PROCI_TOUCHSUPPRESSION_T42: |
| case MXT_PROCI_STYLUS_T47: |
| case MXT_PROCG_NOISESUPPRESSION_T48: |
| case MXT_SPT_COMMSCONFIG_T18: |
| case MXT_SPT_GPIOPWM_T19: |
| case MXT_SPT_SELFTEST_T25: |
| case MXT_SPT_CTECONFIG_T28: |
| case MXT_SPT_USERDATA_T38: |
| case MXT_SPT_DIGITIZER_T43: |
| case MXT_SPT_CTECONFIG_T46: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static void mxt_dump_message(struct mxt_data *data, u8 *message) |
| { |
| dev_dbg(&data->client->dev, "message: %*ph\n", |
| data->T5_msg_size, message); |
| } |
| |
| static int mxt_wait_for_completion(struct mxt_data *data, |
| struct completion *comp, |
| unsigned int timeout_ms) |
| { |
| struct device *dev = &data->client->dev; |
| unsigned long timeout = msecs_to_jiffies(timeout_ms); |
| long ret; |
| |
| ret = wait_for_completion_interruptible_timeout(comp, timeout); |
| if (ret < 0) { |
| return ret; |
| } else if (ret == 0) { |
| dev_err(dev, "Wait for completion timed out.\n"); |
| return -ETIMEDOUT; |
| } |
| return 0; |
| } |
| |
| static int mxt_bootloader_read(struct mxt_data *data, |
| u8 *val, unsigned int count) |
| { |
| int ret; |
| struct i2c_msg msg; |
| |
| msg.addr = data->bootloader_addr; |
| msg.flags = data->client->flags & I2C_M_TEN; |
| msg.flags |= I2C_M_RD; |
| msg.len = count; |
| msg.buf = val; |
| |
| ret = i2c_transfer(data->client->adapter, &msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| ret = ret < 0 ? ret : -EIO; |
| dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n", |
| __func__, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int mxt_bootloader_write(struct mxt_data *data, |
| const u8 * const val, unsigned int count) |
| { |
| int ret; |
| struct i2c_msg msg; |
| |
| msg.addr = data->bootloader_addr; |
| msg.flags = data->client->flags & I2C_M_TEN; |
| msg.len = count; |
| msg.buf = (u8 *)val; |
| |
| ret = i2c_transfer(data->client->adapter, &msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| ret = ret < 0 ? ret : -EIO; |
| dev_err(&data->client->dev, "%s: i2c send failed (%d)\n", |
| __func__, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry) |
| { |
| u8 appmode = data->client->addr; |
| u8 bootloader; |
| |
| switch (appmode) { |
| case 0x4a: |
| case 0x4b: |
| /* Chips after 1664S use different scheme */ |
| if (retry || data->info.family_id >= 0xa2) { |
| bootloader = appmode - 0x24; |
| break; |
| } |
| /* Fall through for normal case */ |
| case 0x4c: |
| case 0x4d: |
| case 0x5a: |
| case 0x5b: |
| bootloader = appmode - 0x26; |
| break; |
| |
| default: |
| dev_err(&data->client->dev, |
| "Appmode i2c address 0x%02x not found\n", |
| appmode); |
| return -EINVAL; |
| } |
| |
| data->bootloader_addr = bootloader; |
| return 0; |
| } |
| |
| static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address) |
| { |
| struct device *dev = &data->client->dev; |
| int error; |
| u8 val; |
| bool crc_failure; |
| |
| error = mxt_lookup_bootloader_address(data, alt_address); |
| if (error) |
| return error; |
| |
| error = mxt_bootloader_read(data, &val, 1); |
| if (error) |
| return error; |
| |
| /* Check app crc fail mode */ |
| crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL; |
| |
| dev_err(dev, "Detected bootloader, status:%02X%s\n", |
| val, crc_failure ? ", APP_CRC_FAIL" : ""); |
| |
| return 0; |
| } |
| |
| static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val) |
| { |
| struct device *dev = &data->client->dev; |
| u8 buf[3]; |
| |
| if (val & MXT_BOOT_EXTENDED_ID) { |
| if (mxt_bootloader_read(data, &buf[0], 3) != 0) { |
| dev_err(dev, "%s: i2c failure\n", __func__); |
| return val; |
| } |
| |
| dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]); |
| |
| return buf[0]; |
| } else { |
| dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK); |
| |
| return val; |
| } |
| } |
| |
| static int mxt_check_bootloader(struct mxt_data *data, unsigned int state, |
| bool wait) |
| { |
| struct device *dev = &data->client->dev; |
| u8 val; |
| int ret; |
| |
| recheck: |
| if (wait) { |
| /* |
| * In application update mode, the interrupt |
| * line signals state transitions. We must wait for the |
| * CHG assertion before reading the status byte. |
| * Once the status byte has been read, the line is deasserted. |
| */ |
| ret = mxt_wait_for_completion(data, &data->bl_completion, |
| MXT_FW_CHG_TIMEOUT); |
| if (ret) { |
| /* |
| * TODO: handle -ERESTARTSYS better by terminating |
| * fw update process before returning to userspace |
| * by writing length 0x000 to device (iff we are in |
| * WAITING_FRAME_DATA state). |
| */ |
| dev_err(dev, "Update wait error %d\n", ret); |
| return ret; |
| } |
| } |
| |
| ret = mxt_bootloader_read(data, &val, 1); |
| if (ret) |
| return ret; |
| |
| if (state == MXT_WAITING_BOOTLOAD_CMD) |
| val = mxt_get_bootloader_version(data, val); |
| |
| switch (state) { |
| case MXT_WAITING_BOOTLOAD_CMD: |
| case MXT_WAITING_FRAME_DATA: |
| case MXT_APP_CRC_FAIL: |
| val &= ~MXT_BOOT_STATUS_MASK; |
| break; |
| case MXT_FRAME_CRC_PASS: |
| if (val == MXT_FRAME_CRC_CHECK) { |
| goto recheck; |
| } else if (val == MXT_FRAME_CRC_FAIL) { |
| dev_err(dev, "Bootloader CRC fail\n"); |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (val != state) { |
| dev_err(dev, "Invalid bootloader state %02X != %02X\n", |
| val, state); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock) |
| { |
| int ret; |
| u8 buf[2]; |
| |
| if (unlock) { |
| buf[0] = MXT_UNLOCK_CMD_LSB; |
| buf[1] = MXT_UNLOCK_CMD_MSB; |
| } else { |
| buf[0] = 0x01; |
| buf[1] = 0x01; |
| } |
| |
| ret = mxt_bootloader_write(data, buf, 2); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int __mxt_read_reg(struct i2c_client *client, |
| u16 reg, u16 len, void *val) |
| { |
| struct i2c_msg xfer[2]; |
| u8 buf[2]; |
| int ret; |
| |
| buf[0] = reg & 0xff; |
| buf[1] = (reg >> 8) & 0xff; |
| |
| /* Write register */ |
| xfer[0].addr = client->addr; |
| xfer[0].flags = 0; |
| xfer[0].len = 2; |
| xfer[0].buf = buf; |
| |
| /* Read data */ |
| xfer[1].addr = client->addr; |
| xfer[1].flags = I2C_M_RD; |
| xfer[1].len = len; |
| xfer[1].buf = val; |
| |
| ret = i2c_transfer(client->adapter, xfer, 2); |
| if (ret == 2) { |
| ret = 0; |
| } else { |
| if (ret >= 0) |
| ret = -EIO; |
| dev_err(&client->dev, "%s: i2c transfer failed (%d)\n", |
| __func__, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len, |
| const void *val) |
| { |
| u8 *buf; |
| size_t count; |
| int ret; |
| |
| count = len + 2; |
| buf = kmalloc(count, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| buf[0] = reg & 0xff; |
| buf[1] = (reg >> 8) & 0xff; |
| memcpy(&buf[2], val, len); |
| |
| ret = i2c_master_send(client, buf, count); |
| if (ret == count) { |
| ret = 0; |
| } else { |
| if (ret >= 0) |
| ret = -EIO; |
| dev_err(&client->dev, "%s: i2c send failed (%d)\n", |
| __func__, ret); |
| } |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val) |
| { |
| return __mxt_write_reg(client, reg, 1, &val); |
| } |
| |
| static struct mxt_object * |
| mxt_get_object(struct mxt_data *data, u8 type) |
| { |
| struct mxt_object *object; |
| int i; |
| |
| for (i = 0; i < data->info.object_num; i++) { |
| object = data->object_table + i; |
| if (object->type == type) |
| return object; |
| } |
| |
| dev_warn(&data->client->dev, "Invalid object type T%u\n", type); |
| return NULL; |
| } |
| |
| static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg) |
| { |
| struct device *dev = &data->client->dev; |
| u8 status = msg[1]; |
| u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16); |
| |
| complete(&data->crc_completion); |
| |
| if (crc != data->config_crc) { |
| data->config_crc = crc; |
| dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc); |
| } |
| |
| /* Detect reset */ |
| if (status & MXT_T6_STATUS_RESET) |
| complete(&data->reset_completion); |
| |
| /* Output debug if status has changed */ |
| if (status != data->t6_status) |
| dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n", |
| status, |
| status == 0 ? " OK" : "", |
| status & MXT_T6_STATUS_RESET ? " RESET" : "", |
| status & MXT_T6_STATUS_OFL ? " OFL" : "", |
| status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "", |
| status & MXT_T6_STATUS_CAL ? " CAL" : "", |
| status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "", |
| status & MXT_T6_STATUS_COMSERR ? " COMSERR" : ""); |
| |
| /* Save current status */ |
| data->t6_status = status; |
| } |
| |
| static int mxt_write_object(struct mxt_data *data, |
| u8 type, u8 offset, u8 val) |
| { |
| struct mxt_object *object; |
| u16 reg; |
| |
| object = mxt_get_object(data, type); |
| if (!object || offset >= mxt_obj_size(object)) |
| return -EINVAL; |
| |
| reg = object->start_address; |
| return mxt_write_reg(data->client, reg + offset, val); |
| } |
| |
| static void mxt_input_button(struct mxt_data *data, u8 *message) |
| { |
| struct input_dev *input = data->input_dev; |
| const struct mxt_platform_data *pdata = data->pdata; |
| bool button; |
| int i; |
| |
| /* Active-low switch */ |
| for (i = 0; i < pdata->t19_num_keys; i++) { |
| if (pdata->t19_keymap[i] == KEY_RESERVED) |
| continue; |
| button = !(message[1] & (1 << i)); |
| input_report_key(input, pdata->t19_keymap[i], button); |
| } |
| } |
| |
| static void mxt_input_sync(struct mxt_data *data) |
| { |
| input_mt_report_pointer_emulation(data->input_dev, |
| data->pdata->t19_num_keys); |
| input_sync(data->input_dev); |
| } |
| |
| static void mxt_proc_t9_message(struct mxt_data *data, u8 *message) |
| { |
| struct device *dev = &data->client->dev; |
| struct input_dev *input_dev = data->input_dev; |
| int id; |
| u8 status; |
| int x; |
| int y; |
| int area; |
| int amplitude; |
| |
| id = message[0] - data->T9_reportid_min; |
| status = message[1]; |
| x = (message[2] << 4) | ((message[4] >> 4) & 0xf); |
| y = (message[3] << 4) | ((message[4] & 0xf)); |
| |
| /* Handle 10/12 bit switching */ |
| if (data->max_x < 1024) |
| x >>= 2; |
| if (data->max_y < 1024) |
| y >>= 2; |
| |
| area = message[5]; |
| amplitude = message[6]; |
| |
| dev_dbg(dev, |
| "[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n", |
| id, |
| (status & MXT_T9_DETECT) ? 'D' : '.', |
| (status & MXT_T9_PRESS) ? 'P' : '.', |
| (status & MXT_T9_RELEASE) ? 'R' : '.', |
| (status & MXT_T9_MOVE) ? 'M' : '.', |
| (status & MXT_T9_VECTOR) ? 'V' : '.', |
| (status & MXT_T9_AMP) ? 'A' : '.', |
| (status & MXT_T9_SUPPRESS) ? 'S' : '.', |
| (status & MXT_T9_UNGRIP) ? 'U' : '.', |
| x, y, area, amplitude); |
| |
| input_mt_slot(input_dev, id); |
| |
| if (status & MXT_T9_DETECT) { |
| /* |
| * Multiple bits may be set if the host is slow to read |
| * the status messages, indicating all the events that |
| * have happened. |
| */ |
| if (status & MXT_T9_RELEASE) { |
| input_mt_report_slot_state(input_dev, |
| MT_TOOL_FINGER, 0); |
| mxt_input_sync(data); |
| } |
| |
| /* Touch active */ |
| input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1); |
| input_report_abs(input_dev, ABS_MT_POSITION_X, x); |
| input_report_abs(input_dev, ABS_MT_POSITION_Y, y); |
| input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude); |
| input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area); |
| } else { |
| /* Touch no longer active, close out slot */ |
| input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0); |
| } |
| |
| data->update_input = true; |
| } |
| |
| static int mxt_proc_message(struct mxt_data *data, u8 *message) |
| { |
| u8 report_id = message[0]; |
| |
| if (report_id == MXT_RPTID_NOMSG) |
| return 0; |
| |
| if (report_id == data->T6_reportid) { |
| mxt_proc_t6_messages(data, message); |
| } else if (!data->input_dev) { |
| /* |
| * Do not report events if input device |
| * is not yet registered. |
| */ |
| mxt_dump_message(data, message); |
| } else if (report_id >= data->T9_reportid_min |
| && report_id <= data->T9_reportid_max) { |
| mxt_proc_t9_message(data, message); |
| } else if (report_id == data->T19_reportid) { |
| mxt_input_button(data, message); |
| data->update_input = true; |
| } else { |
| mxt_dump_message(data, message); |
| } |
| |
| return 1; |
| } |
| |
| static int mxt_read_and_process_messages(struct mxt_data *data, u8 count) |
| { |
| struct device *dev = &data->client->dev; |
| int ret; |
| int i; |
| u8 num_valid = 0; |
| |
| /* Safety check for msg_buf */ |
| if (count > data->max_reportid) |
| return -EINVAL; |
| |
| /* Process remaining messages if necessary */ |
| ret = __mxt_read_reg(data->client, data->T5_address, |
| data->T5_msg_size * count, data->msg_buf); |
| if (ret) { |
| dev_err(dev, "Failed to read %u messages (%d)\n", count, ret); |
| return ret; |
| } |
| |
| for (i = 0; i < count; i++) { |
| ret = mxt_proc_message(data, |
| data->msg_buf + data->T5_msg_size * i); |
| |
| if (ret == 1) |
| num_valid++; |
| } |
| |
| /* return number of messages read */ |
| return num_valid; |
| } |
| |
| static irqreturn_t mxt_process_messages_t44(struct mxt_data *data) |
| { |
| struct device *dev = &data->client->dev; |
| int ret; |
| u8 count, num_left; |
| |
| /* Read T44 and T5 together */ |
| ret = __mxt_read_reg(data->client, data->T44_address, |
| data->T5_msg_size + 1, data->msg_buf); |
| if (ret) { |
| dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret); |
| return IRQ_NONE; |
| } |
| |
| count = data->msg_buf[0]; |
| |
| if (count == 0) { |
| /* |
| * This condition is caused by the CHG line being configured |
| * in Mode 0. It results in unnecessary I2C operations but it |
| * is benign. |
| */ |
| dev_dbg(dev, "Interrupt triggered but zero messages\n"); |
| return IRQ_NONE; |
| } else if (count > data->max_reportid) { |
| dev_err(dev, "T44 count %d exceeded max report id\n", count); |
| count = data->max_reportid; |
| } |
| |
| /* Process first message */ |
| ret = mxt_proc_message(data, data->msg_buf + 1); |
| if (ret < 0) { |
| dev_warn(dev, "Unexpected invalid message\n"); |
| return IRQ_NONE; |
| } |
| |
| num_left = count - 1; |
| |
| /* Process remaining messages if necessary */ |
| if (num_left) { |
| ret = mxt_read_and_process_messages(data, num_left); |
| if (ret < 0) |
| goto end; |
| else if (ret != num_left) |
| dev_warn(dev, "Unexpected invalid message\n"); |
| } |
| |
| end: |
| if (data->update_input) { |
| mxt_input_sync(data); |
| data->update_input = false; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mxt_process_messages_until_invalid(struct mxt_data *data) |
| { |
| struct device *dev = &data->client->dev; |
| int count, read; |
| u8 tries = 2; |
| |
| count = data->max_reportid; |
| |
| /* Read messages until we force an invalid */ |
| do { |
| read = mxt_read_and_process_messages(data, count); |
| if (read < count) |
| return 0; |
| } while (--tries); |
| |
| if (data->update_input) { |
| mxt_input_sync(data); |
| data->update_input = false; |
| } |
| |
| dev_err(dev, "CHG pin isn't cleared\n"); |
| return -EBUSY; |
| } |
| |
| static irqreturn_t mxt_process_messages(struct mxt_data *data) |
| { |
| int total_handled, num_handled; |
| u8 count = data->last_message_count; |
| |
| if (count < 1 || count > data->max_reportid) |
| count = 1; |
| |
| /* include final invalid message */ |
| total_handled = mxt_read_and_process_messages(data, count + 1); |
| if (total_handled < 0) |
| return IRQ_NONE; |
| /* if there were invalid messages, then we are done */ |
| else if (total_handled <= count) |
| goto update_count; |
| |
| /* keep reading two msgs until one is invalid or reportid limit */ |
| do { |
| num_handled = mxt_read_and_process_messages(data, 2); |
| if (num_handled < 0) |
| return IRQ_NONE; |
| |
| total_handled += num_handled; |
| |
| if (num_handled < 2) |
| break; |
| } while (total_handled < data->num_touchids); |
| |
| update_count: |
| data->last_message_count = total_handled; |
| |
| if (data->update_input) { |
| mxt_input_sync(data); |
| data->update_input = false; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t mxt_interrupt(int irq, void *dev_id) |
| { |
| struct mxt_data *data = dev_id; |
| |
| if (data->in_bootloader) { |
| /* bootloader state transition completion */ |
| complete(&data->bl_completion); |
| return IRQ_HANDLED; |
| } |
| |
| if (!data->object_table) |
| return IRQ_HANDLED; |
| |
| if (data->T44_address) { |
| return mxt_process_messages_t44(data); |
| } else { |
| return mxt_process_messages(data); |
| } |
| } |
| |
| static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset, |
| u8 value, bool wait) |
| { |
| u16 reg; |
| u8 command_register; |
| int timeout_counter = 0; |
| int ret; |
| |
| reg = data->T6_address + cmd_offset; |
| |
| ret = mxt_write_reg(data->client, reg, value); |
| if (ret) |
| return ret; |
| |
| if (!wait) |
| return 0; |
| |
| do { |
| msleep(20); |
| ret = __mxt_read_reg(data->client, reg, 1, &command_register); |
| if (ret) |
| return ret; |
| } while (command_register != 0 && timeout_counter++ <= 100); |
| |
| if (timeout_counter > 100) { |
| dev_err(&data->client->dev, "Command failed!\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int mxt_soft_reset(struct mxt_data *data) |
| { |
| struct device *dev = &data->client->dev; |
| int ret = 0; |
| |
| dev_info(dev, "Resetting chip\n"); |
| |
| reinit_completion(&data->reset_completion); |
| |
| ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false); |
| if (ret) |
| return ret; |
| |
| ret = mxt_wait_for_completion(data, &data->reset_completion, |
| MXT_RESET_TIMEOUT); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value) |
| { |
| /* |
| * On failure, CRC is set to 0 and config will always be |
| * downloaded. |
| */ |
| data->config_crc = 0; |
| reinit_completion(&data->crc_completion); |
| |
| mxt_t6_command(data, cmd, value, true); |
| |
| /* |
| * Wait for crc message. On failure, CRC is set to 0 and config will |
| * always be downloaded. |
| */ |
| mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT); |
| } |
| |
| static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte) |
| { |
| static const unsigned int crcpoly = 0x80001B; |
| u32 result; |
| u32 data_word; |
| |
| data_word = (secondbyte << 8) | firstbyte; |
| result = ((*crc << 1) ^ data_word); |
| |
| if (result & 0x1000000) |
| result ^= crcpoly; |
| |
| *crc = result; |
| } |
| |
| static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off) |
| { |
| u32 crc = 0; |
| u8 *ptr = base + start_off; |
| u8 *last_val = base + end_off - 1; |
| |
| if (end_off < start_off) |
| return -EINVAL; |
| |
| while (ptr < last_val) { |
| mxt_calc_crc24(&crc, *ptr, *(ptr + 1)); |
| ptr += 2; |
| } |
| |
| /* if len is odd, fill the last byte with 0 */ |
| if (ptr == last_val) |
| mxt_calc_crc24(&crc, *ptr, 0); |
| |
| /* Mask to 24-bit */ |
| crc &= 0x00FFFFFF; |
| |
| return crc; |
| } |
| |
| static int mxt_prepare_cfg_mem(struct mxt_data *data, |
| const struct firmware *cfg, |
| unsigned int data_pos, |
| unsigned int cfg_start_ofs, |
| u8 *config_mem, |
| size_t config_mem_size) |
| { |
| struct device *dev = &data->client->dev; |
| struct mxt_object *object; |
| unsigned int type, instance, size, byte_offset; |
| int offset; |
| int ret; |
| int i; |
| u16 reg; |
| u8 val; |
| |
| while (data_pos < cfg->size) { |
| /* Read type, instance, length */ |
| ret = sscanf(cfg->data + data_pos, "%x %x %x%n", |
| &type, &instance, &size, &offset); |
| if (ret == 0) { |
| /* EOF */ |
| break; |
| } else if (ret != 3) { |
| dev_err(dev, "Bad format: failed to parse object\n"); |
| return -EINVAL; |
| } |
| data_pos += offset; |
| |
| object = mxt_get_object(data, type); |
| if (!object) { |
| /* Skip object */ |
| for (i = 0; i < size; i++) { |
| ret = sscanf(cfg->data + data_pos, "%hhx%n", |
| &val, &offset); |
| if (ret != 1) { |
| dev_err(dev, "Bad format in T%d at %d\n", |
| type, i); |
| return -EINVAL; |
| } |
| data_pos += offset; |
| } |
| continue; |
| } |
| |
| if (size > mxt_obj_size(object)) { |
| /* |
| * Either we are in fallback mode due to wrong |
| * config or config from a later fw version, |
| * or the file is corrupt or hand-edited. |
| */ |
| dev_warn(dev, "Discarding %zu byte(s) in T%u\n", |
| size - mxt_obj_size(object), type); |
| } else if (mxt_obj_size(object) > size) { |
| /* |
| * If firmware is upgraded, new bytes may be added to |
| * end of objects. It is generally forward compatible |
| * to zero these bytes - previous behaviour will be |
| * retained. However this does invalidate the CRC and |
| * will force fallback mode until the configuration is |
| * updated. We warn here but do nothing else - the |
| * malloc has zeroed the entire configuration. |
| */ |
| dev_warn(dev, "Zeroing %zu byte(s) in T%d\n", |
| mxt_obj_size(object) - size, type); |
| } |
| |
| if (instance >= mxt_obj_instances(object)) { |
| dev_err(dev, "Object instances exceeded!\n"); |
| return -EINVAL; |
| } |
| |
| reg = object->start_address + mxt_obj_size(object) * instance; |
| |
| for (i = 0; i < size; i++) { |
| ret = sscanf(cfg->data + data_pos, "%hhx%n", |
| &val, |
| &offset); |
| if (ret != 1) { |
| dev_err(dev, "Bad format in T%d at %d\n", |
| type, i); |
| return -EINVAL; |
| } |
| data_pos += offset; |
| |
| if (i > mxt_obj_size(object)) |
| continue; |
| |
| byte_offset = reg + i - cfg_start_ofs; |
| |
| if (byte_offset >= 0 && byte_offset < config_mem_size) { |
| *(config_mem + byte_offset) = val; |
| } else { |
| dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n", |
| reg, object->type, byte_offset); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start, |
| u8 *config_mem, size_t config_mem_size) |
| { |
| unsigned int byte_offset = 0; |
| int error; |
| |
| /* Write configuration as blocks */ |
| while (byte_offset < config_mem_size) { |
| unsigned int size = config_mem_size - byte_offset; |
| |
| if (size > MXT_MAX_BLOCK_WRITE) |
| size = MXT_MAX_BLOCK_WRITE; |
| |
| error = __mxt_write_reg(data->client, |
| cfg_start + byte_offset, |
| size, config_mem + byte_offset); |
| if (error) { |
| dev_err(&data->client->dev, |
| "Config write error, ret=%d\n", error); |
| return error; |
| } |
| |
| byte_offset += size; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mxt_update_cfg - download configuration to chip |
| * |
| * Atmel Raw Config File Format |
| * |
| * The first four lines of the raw config file contain: |
| * 1) Version |
| * 2) Chip ID Information (first 7 bytes of device memory) |
| * 3) Chip Information Block 24-bit CRC Checksum |
| * 4) Chip Configuration 24-bit CRC Checksum |
| * |
| * The rest of the file consists of one line per object instance: |
| * <TYPE> <INSTANCE> <SIZE> <CONTENTS> |
| * |
| * <TYPE> - 2-byte object type as hex |
| * <INSTANCE> - 2-byte object instance number as hex |
| * <SIZE> - 2-byte object size as hex |
| * <CONTENTS> - array of <SIZE> 1-byte hex values |
| */ |
| static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg) |
| { |
| struct device *dev = &data->client->dev; |
| struct mxt_info cfg_info; |
| int ret; |
| int offset; |
| int data_pos; |
| int i; |
| int cfg_start_ofs; |
| u32 info_crc, config_crc, calculated_crc; |
| u8 *config_mem; |
| size_t config_mem_size; |
| |
| mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1); |
| |
| if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) { |
| dev_err(dev, "Unrecognised config file\n"); |
| return -EINVAL; |
| } |
| |
| data_pos = strlen(MXT_CFG_MAGIC); |
| |
| /* Load information block and check */ |
| for (i = 0; i < sizeof(struct mxt_info); i++) { |
| ret = sscanf(cfg->data + data_pos, "%hhx%n", |
| (unsigned char *)&cfg_info + i, |
| &offset); |
| if (ret != 1) { |
| dev_err(dev, "Bad format\n"); |
| return -EINVAL; |
| } |
| |
| data_pos += offset; |
| } |
| |
| if (cfg_info.family_id != data->info.family_id) { |
| dev_err(dev, "Family ID mismatch!\n"); |
| return -EINVAL; |
| } |
| |
| if (cfg_info.variant_id != data->info.variant_id) { |
| dev_err(dev, "Variant ID mismatch!\n"); |
| return -EINVAL; |
| } |
| |
| /* Read CRCs */ |
| ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset); |
| if (ret != 1) { |
| dev_err(dev, "Bad format: failed to parse Info CRC\n"); |
| return -EINVAL; |
| } |
| data_pos += offset; |
| |
| ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset); |
| if (ret != 1) { |
| dev_err(dev, "Bad format: failed to parse Config CRC\n"); |
| return -EINVAL; |
| } |
| data_pos += offset; |
| |
| /* |
| * The Info Block CRC is calculated over mxt_info and the object |
| * table. If it does not match then we are trying to load the |
| * configuration from a different chip or firmware version, so |
| * the configuration CRC is invalid anyway. |
| */ |
| if (info_crc == data->info_crc) { |
| if (config_crc == 0 || data->config_crc == 0) { |
| dev_info(dev, "CRC zero, attempting to apply config\n"); |
| } else if (config_crc == data->config_crc) { |
| dev_dbg(dev, "Config CRC 0x%06X: OK\n", |
| data->config_crc); |
| return 0; |
| } else { |
| dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n", |
| data->config_crc, config_crc); |
| } |
| } else { |
| dev_warn(dev, |
| "Warning: Info CRC error - device=0x%06X file=0x%06X\n", |
| data->info_crc, info_crc); |
| } |
| |
| /* Malloc memory to store configuration */ |
| cfg_start_ofs = MXT_OBJECT_START + |
| data->info.object_num * sizeof(struct mxt_object) + |
| MXT_INFO_CHECKSUM_SIZE; |
| config_mem_size = data->mem_size - cfg_start_ofs; |
| config_mem = kzalloc(config_mem_size, GFP_KERNEL); |
| if (!config_mem) { |
| dev_err(dev, "Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs, |
| config_mem, config_mem_size); |
| if (ret) |
| goto release_mem; |
| |
| /* Calculate crc of the received configs (not the raw config file) */ |
| if (data->T7_address < cfg_start_ofs) { |
| dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n", |
| data->T7_address, cfg_start_ofs); |
| ret = 0; |
| goto release_mem; |
| } |
| |
| calculated_crc = mxt_calculate_crc(config_mem, |
| data->T7_address - cfg_start_ofs, |
| config_mem_size); |
| |
| if (config_crc > 0 && config_crc != calculated_crc) |
| dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n", |
| calculated_crc, config_crc); |
| |
| ret = mxt_upload_cfg_mem(data, cfg_start_ofs, |
| config_mem, config_mem_size); |
| if (ret) |
| goto release_mem; |
| |
| mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE); |
| |
| ret = mxt_soft_reset(data); |
| if (ret) |
| goto release_mem; |
| |
| dev_info(dev, "Config successfully updated\n"); |
| |
| release_mem: |
| kfree(config_mem); |
| return ret; |
| } |
| |
| static int mxt_acquire_irq(struct mxt_data *data) |
| { |
| int error; |
| |
| enable_irq(data->irq); |
| |
| error = mxt_process_messages_until_invalid(data); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| static int mxt_get_info(struct mxt_data *data) |
| { |
| struct i2c_client *client = data->client; |
| struct mxt_info *info = &data->info; |
| int error; |
| |
| /* Read 7-byte info block starting at address 0 */ |
| error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info); |
| if (error) |
| return error; |
| |
| return 0; |
| } |
| |
| static void mxt_free_input_device(struct mxt_data *data) |
| { |
| if (data->input_dev) { |
| input_unregister_device(data->input_dev); |
| data->input_dev = NULL; |
| } |
| } |
| |
| static void mxt_free_object_table(struct mxt_data *data) |
| { |
| kfree(data->object_table); |
| data->object_table = NULL; |
| kfree(data->msg_buf); |
| data->msg_buf = NULL; |
| data->T5_address = 0; |
| data->T5_msg_size = 0; |
| data->T6_reportid = 0; |
| data->T7_address = 0; |
| data->T9_reportid_min = 0; |
| data->T9_reportid_max = 0; |
| data->T19_reportid = 0; |
| data->T44_address = 0; |
| data->max_reportid = 0; |
| } |
| |
| static int mxt_get_object_table(struct mxt_data *data) |
| { |
| struct i2c_client *client = data->client; |
| size_t table_size; |
| struct mxt_object *object_table; |
| int error; |
| int i; |
| u8 reportid; |
| u16 end_address; |
| |
| table_size = data->info.object_num * sizeof(struct mxt_object); |
| object_table = kzalloc(table_size, GFP_KERNEL); |
| if (!object_table) { |
| dev_err(&data->client->dev, "Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| error = __mxt_read_reg(client, MXT_OBJECT_START, table_size, |
| object_table); |
| if (error) { |
| kfree(object_table); |
| return error; |
| } |
| |
| /* Valid Report IDs start counting from 1 */ |
| reportid = 1; |
| data->mem_size = 0; |
| for (i = 0; i < data->info.object_num; i++) { |
| struct mxt_object *object = object_table + i; |
| u8 min_id, max_id; |
| |
| le16_to_cpus(&object->start_address); |
| |
| if (object->num_report_ids) { |
| min_id = reportid; |
| reportid += object->num_report_ids * |
| mxt_obj_instances(object); |
| max_id = reportid - 1; |
| } else { |
| min_id = 0; |
| max_id = 0; |
| } |
| |
| dev_dbg(&data->client->dev, |
| "T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n", |
| object->type, object->start_address, |
| mxt_obj_size(object), mxt_obj_instances(object), |
| min_id, max_id); |
| |
| switch (object->type) { |
| case MXT_GEN_MESSAGE_T5: |
| if (data->info.family_id == 0x80 && |
| data->info.version < 0x20) { |
| /* |
| * On mXT224 firmware versions prior to V2.0 |
| * read and discard unused CRC byte otherwise |
| * DMA reads are misaligned. |
| */ |
| data->T5_msg_size = mxt_obj_size(object); |
| } else { |
| /* CRC not enabled, so skip last byte */ |
| data->T5_msg_size = mxt_obj_size(object) - 1; |
| } |
| data->T5_address = object->start_address; |
| break; |
| case MXT_GEN_COMMAND_T6: |
| data->T6_reportid = min_id; |
| data->T6_address = object->start_address; |
| break; |
| case MXT_GEN_POWER_T7: |
| data->T7_address = object->start_address; |
| break; |
| case MXT_TOUCH_MULTI_T9: |
| data->T9_reportid_min = min_id; |
| data->T9_reportid_max = max_id; |
| data->num_touchids = object->num_report_ids |
| * mxt_obj_instances(object); |
| break; |
| case MXT_SPT_MESSAGECOUNT_T44: |
| data->T44_address = object->start_address; |
| break; |
| case MXT_SPT_GPIOPWM_T19: |
| data->T19_reportid = min_id; |
| break; |
| } |
| |
| end_address = object->start_address |
| + mxt_obj_size(object) * mxt_obj_instances(object) - 1; |
| |
| if (end_address >= data->mem_size) |
| data->mem_size = end_address + 1; |
| } |
| |
| /* Store maximum reportid */ |
| data->max_reportid = reportid; |
| |
| /* If T44 exists, T5 position has to be directly after */ |
| if (data->T44_address && (data->T5_address != data->T44_address + 1)) { |
| dev_err(&client->dev, "Invalid T44 position\n"); |
| error = -EINVAL; |
| goto free_object_table; |
| } |
| |
| data->msg_buf = kcalloc(data->max_reportid, |
| data->T5_msg_size, GFP_KERNEL); |
| if (!data->msg_buf) { |
| dev_err(&client->dev, "Failed to allocate message buffer\n"); |
| error = -ENOMEM; |
| goto free_object_table; |
| } |
| |
| data->object_table = object_table; |
| |
| return 0; |
| |
| free_object_table: |
| mxt_free_object_table(data); |
| return error; |
| } |
| |
| static int mxt_read_t9_resolution(struct mxt_data *data) |
| { |
| struct i2c_client *client = data->client; |
| int error; |
| struct t9_range range; |
| unsigned char orient; |
| struct mxt_object *object; |
| |
| object = mxt_get_object(data, MXT_TOUCH_MULTI_T9); |
| if (!object) |
| return -EINVAL; |
| |
| error = __mxt_read_reg(client, |
| object->start_address + MXT_T9_RANGE, |
| sizeof(range), &range); |
| if (error) |
| return error; |
| |
| le16_to_cpus(&range.x); |
| le16_to_cpus(&range.y); |
| |
| error = __mxt_read_reg(client, |
| object->start_address + MXT_T9_ORIENT, |
| 1, &orient); |
| if (error) |
| return error; |
| |
| /* Handle default values */ |
| if (range.x == 0) |
| range.x = 1023; |
| |
| if (range.y == 0) |
| range.y = 1023; |
| |
| if (orient & MXT_T9_ORIENT_SWITCH) { |
| data->max_x = range.y; |
| data->max_y = range.x; |
| } else { |
| data->max_x = range.x; |
| data->max_y = range.y; |
| } |
| |
| dev_dbg(&client->dev, |
| "Touchscreen size X%uY%u\n", data->max_x, data->max_y); |
| |
| return 0; |
| } |
| |
| static int mxt_input_open(struct input_dev *dev); |
| static void mxt_input_close(struct input_dev *dev); |
| |
| static int mxt_initialize_t9_input_device(struct mxt_data *data) |
| { |
| struct device *dev = &data->client->dev; |
| const struct mxt_platform_data *pdata = data->pdata; |
| struct input_dev *input_dev; |
| int error; |
| unsigned int num_mt_slots; |
| unsigned int mt_flags = 0; |
| int i; |
| |
| error = mxt_read_t9_resolution(data); |
| if (error) |
| dev_warn(dev, "Failed to initialize T9 resolution\n"); |
| |
| input_dev = input_allocate_device(); |
| if (!input_dev) { |
| dev_err(dev, "Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| input_dev->name = "Atmel maXTouch Touchscreen"; |
| input_dev->phys = data->phys; |
| input_dev->id.bustype = BUS_I2C; |
| input_dev->dev.parent = dev; |
| input_dev->open = mxt_input_open; |
| input_dev->close = mxt_input_close; |
| |
| __set_bit(EV_ABS, input_dev->evbit); |
| __set_bit(EV_KEY, input_dev->evbit); |
| __set_bit(BTN_TOUCH, input_dev->keybit); |
| |
| if (pdata->t19_num_keys) { |
| __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); |
| |
| for (i = 0; i < pdata->t19_num_keys; i++) |
| if (pdata->t19_keymap[i] != KEY_RESERVED) |
| input_set_capability(input_dev, EV_KEY, |
| pdata->t19_keymap[i]); |
| |
| mt_flags |= INPUT_MT_POINTER; |
| |
| input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); |
| input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); |
| input_abs_set_res(input_dev, ABS_MT_POSITION_X, |
| MXT_PIXELS_PER_MM); |
| input_abs_set_res(input_dev, ABS_MT_POSITION_Y, |
| MXT_PIXELS_PER_MM); |
| |
| input_dev->name = "Atmel maXTouch Touchpad"; |
| } |
| |
| /* For single touch */ |
| input_set_abs_params(input_dev, ABS_X, |
| 0, data->max_x, 0, 0); |
| input_set_abs_params(input_dev, ABS_Y, |
| 0, data->max_y, 0, 0); |
| input_set_abs_params(input_dev, ABS_PRESSURE, |
| 0, 255, 0, 0); |
| |
| /* For multi touch */ |
| num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; |
| error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags); |
| if (error) { |
| dev_err(dev, "Error %d initialising slots\n", error); |
| goto err_free_mem; |
| } |
| |
| input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, |
| 0, MXT_MAX_AREA, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_X, |
| 0, data->max_x, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_POSITION_Y, |
| 0, data->max_y, 0, 0); |
| input_set_abs_params(input_dev, ABS_MT_PRESSURE, |
| 0, 255, 0, 0); |
| |
| input_set_drvdata(input_dev, data); |
| |
| error = input_register_device(input_dev); |
| if (error) { |
| dev_err(dev, "Error %d registering input device\n", error); |
| goto err_free_mem; |
| } |
| |
| data->input_dev = input_dev; |
| |
| return 0; |
| |
| err_free_mem: |
| input_free_device(input_dev); |
| return error; |
| } |
| |
| static int mxt_configure_objects(struct mxt_data *data, |
| const struct firmware *cfg); |
| |
| static void mxt_config_cb(const struct firmware *cfg, void *ctx) |
| { |
| mxt_configure_objects(ctx, cfg); |
| release_firmware(cfg); |
| } |
| |
| static int mxt_initialize(struct mxt_data *data) |
| { |
| struct i2c_client *client = data->client; |
| int recovery_attempts = 0; |
| int error; |
| |
| while (1) { |
| error = mxt_get_info(data); |
| if (!error) |
| break; |
| |
| /* Check bootloader state */ |
| error = mxt_probe_bootloader(data, false); |
| if (error) { |
| dev_info(&client->dev, "Trying alternate bootloader address\n"); |
| error = mxt_probe_bootloader(data, true); |
| if (error) { |
| /* Chip is not in appmode or bootloader mode */ |
| return error; |
| } |
| } |
| |
| /* OK, we are in bootloader, see if we can recover */ |
| if (++recovery_attempts > 1) { |
| dev_err(&client->dev, "Could not recover from bootloader mode\n"); |
| /* |
| * We can reflash from this state, so do not |
| * abort initialization. |
| */ |
| data->in_bootloader = true; |
| return 0; |
| } |
| |
| /* Attempt to exit bootloader into app mode */ |
| mxt_send_bootloader_cmd(data, false); |
| msleep(MXT_FW_RESET_TIME); |
| } |
| |
| /* Get object table information */ |
| error = mxt_get_object_table(data); |
| if (error) { |
| dev_err(&client->dev, "Error %d reading object table\n", error); |
| return error; |
| } |
| |
| error = mxt_acquire_irq(data); |
| if (error) |
| goto err_free_object_table; |
| |
| error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME, |
| &client->dev, GFP_KERNEL, data, |
| mxt_config_cb); |
| if (error) { |
| dev_err(&client->dev, "Failed to invoke firmware loader: %d\n", |
| error); |
| goto err_free_object_table; |
| } |
| |
| return 0; |
| |
| err_free_object_table: |
| mxt_free_object_table(data); |
| return error; |
| } |
| |
| static int mxt_configure_objects(struct mxt_data *data, |
| const struct firmware *cfg) |
| { |
| struct device *dev = &data->client->dev; |
| struct mxt_info *info = &data->info; |
| int error; |
| |
| if (cfg) { |
| error = mxt_update_cfg(data, cfg); |
| if (error) |
| dev_warn(dev, "Error %d updating config\n", error); |
| } |
| |
| error = mxt_initialize_t9_input_device(data); |
| if (error) |
| return error; |
| |
| dev_info(dev, |
| "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n", |
| info->family_id, info->variant_id, info->version >> 4, |
| info->version & 0xf, info->build, info->object_num); |
| |
| return 0; |
| } |
| |
| /* Firmware Version is returned as Major.Minor.Build */ |
| static ssize_t mxt_fw_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct mxt_data *data = dev_get_drvdata(dev); |
| struct mxt_info *info = &data->info; |
| return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n", |
| info->version >> 4, info->version & 0xf, info->build); |
| } |
| |
| /* Hardware Version is returned as FamilyID.VariantID */ |
| static ssize_t mxt_hw_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct mxt_data *data = dev_get_drvdata(dev); |
| struct mxt_info *info = &data->info; |
| return scnprintf(buf, PAGE_SIZE, "%u.%u\n", |
| info->family_id, info->variant_id); |
| } |
| |
| static ssize_t mxt_show_instance(char *buf, int count, |
| struct mxt_object *object, int instance, |
| const u8 *val) |
| { |
| int i; |
| |
| if (mxt_obj_instances(object) > 1) |
| count += scnprintf(buf + count, PAGE_SIZE - count, |
| "Instance %u\n", instance); |
| |
| for (i = 0; i < mxt_obj_size(object); i++) |
| count += scnprintf(buf + count, PAGE_SIZE - count, |
| "\t[%2u]: %02x (%d)\n", i, val[i], val[i]); |
| count += scnprintf(buf + count, PAGE_SIZE - count, "\n"); |
| |
| return count; |
| } |
| |
| static ssize_t mxt_object_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct mxt_data *data = dev_get_drvdata(dev); |
| struct mxt_object *object; |
| int count = 0; |
| int i, j; |
| int error; |
| u8 *obuf; |
| |
| /* Pre-allocate buffer large enough to hold max sized object. */ |
| obuf = kmalloc(256, GFP_KERNEL); |
| if (!obuf) |
| return -ENOMEM; |
| |
| error = 0; |
| for (i = 0; i < data->info.object_num; i++) { |
| object = data->object_table + i; |
| |
| if (!mxt_object_readable(object->type)) |
| continue; |
| |
| count += scnprintf(buf + count, PAGE_SIZE - count, |
| "T%u:\n", object->type); |
| |
| for (j = 0; j < mxt_obj_instances(object); j++) { |
| u16 size = mxt_obj_size(object); |
| u16 addr = object->start_address + j * size; |
| |
| error = __mxt_read_reg(data->client, addr, size, obuf); |
| if (error) |
| goto done; |
| |
| count = mxt_show_instance(buf, count, object, j, obuf); |
| } |
| } |
| |
| done: |
| kfree(obuf); |
| return error ?: count; |
| } |
| |
| static int mxt_check_firmware_format(struct device *dev, |
| const struct firmware *fw) |
| { |
| unsigned int pos = 0; |
| char c; |
| |
| while (pos < fw->size) { |
| c = *(fw->data + pos); |
| |
| if (c < '0' || (c > '9' && c < 'A') || c > 'F') |
| return 0; |
| |
| pos++; |
| } |
| |
| /* |
| * To convert file try: |
| * xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw |
| */ |
| dev_err(dev, "Aborting: firmware file must be in binary format\n"); |
| |
| return -EINVAL; |
| } |
| |
| static int mxt_load_fw(struct device *dev, const char *fn) |
| { |
| struct mxt_data *data = dev_get_drvdata(dev); |
| const struct firmware *fw = NULL; |
| unsigned int frame_size; |
| unsigned int pos = 0; |
| unsigned int retry = 0; |
| unsigned int frame = 0; |
| int ret; |
| |
| ret = request_firmware(&fw, fn, dev); |
| if (ret) { |
| dev_err(dev, "Unable to open firmware %s\n", fn); |
| return ret; |
| } |
| |
| /* Check for incorrect enc file */ |
| ret = mxt_check_firmware_format(dev, fw); |
| if (ret) |
| goto release_firmware; |
| |
| if (!data->in_bootloader) { |
| /* Change to the bootloader mode */ |
| data->in_bootloader = true; |
| |
| ret = mxt_t6_command(data, MXT_COMMAND_RESET, |
| MXT_BOOT_VALUE, false); |
| if (ret) |
| goto release_firmware; |
| |
| msleep(MXT_RESET_TIME); |
| |
| /* Do not need to scan since we know family ID */ |
| ret = mxt_lookup_bootloader_address(data, 0); |
| if (ret) |
| goto release_firmware; |
| |
| mxt_free_input_device(data); |
| mxt_free_object_table(data); |
| } else { |
| enable_irq(data->irq); |
| } |
| |
| reinit_completion(&data->bl_completion); |
| |
| ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false); |
| if (ret) { |
| /* Bootloader may still be unlocked from previous attempt */ |
| ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false); |
| if (ret) |
| goto disable_irq; |
| } else { |
| dev_info(dev, "Unlocking bootloader\n"); |
| |
| /* Unlock bootloader */ |
| ret = mxt_send_bootloader_cmd(data, true); |
| if (ret) |
| goto disable_irq; |
| } |
| |
| while (pos < fw->size) { |
| ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true); |
| if (ret) |
| goto disable_irq; |
| |
| frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1)); |
| |
| /* Take account of CRC bytes */ |
| frame_size += 2; |
| |
| /* Write one frame to device */ |
| ret = mxt_bootloader_write(data, fw->data + pos, frame_size); |
| if (ret) |
| goto disable_irq; |
| |
| ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true); |
| if (ret) { |
| retry++; |
| |
| /* Back off by 20ms per retry */ |
| msleep(retry * 20); |
| |
| if (retry > 20) { |
| dev_err(dev, "Retry count exceeded\n"); |
| goto disable_irq; |
| } |
| } else { |
| retry = 0; |
| pos += frame_size; |
| frame++; |
| } |
| |
| if (frame % 50 == 0) |
| dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n", |
| frame, pos, fw->size); |
| } |
| |
| /* Wait for flash. */ |
| ret = mxt_wait_for_completion(data, &data->bl_completion, |
| MXT_FW_RESET_TIME); |
| if (ret) |
| goto disable_irq; |
| |
| dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos); |
| |
| /* |
| * Wait for device to reset. Some bootloader versions do not assert |
| * the CHG line after bootloading has finished, so ignore potential |
| * errors. |
| */ |
| mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME); |
| |
| data->in_bootloader = false; |
| |
| disable_irq: |
| disable_irq(data->irq); |
| release_firmware: |
| release_firmware(fw); |
| return ret; |
| } |
| |
| static ssize_t mxt_update_fw_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct mxt_data *data = dev_get_drvdata(dev); |
| int error; |
| |
| error = mxt_load_fw(dev, MXT_FW_NAME); |
| if (error) { |
| dev_err(dev, "The firmware update failed(%d)\n", error); |
| count = error; |
| } else { |
| dev_info(dev, "The firmware update succeeded\n"); |
| |
| error = mxt_initialize(data); |
| if (error) |
| return error; |
| } |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL); |
| static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL); |
| static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL); |
| static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store); |
| |
| static struct attribute *mxt_attrs[] = { |
| &dev_attr_fw_version.attr, |
| &dev_attr_hw_version.attr, |
| &dev_attr_object.attr, |
| &dev_attr_update_fw.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group mxt_attr_group = { |
| .attrs = mxt_attrs, |
| }; |
| |
| static void mxt_start(struct mxt_data *data) |
| { |
| /* Touch enable */ |
| mxt_write_object(data, |
| MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83); |
| } |
| |
| static void mxt_stop(struct mxt_data *data) |
| { |
| /* Touch disable */ |
| mxt_write_object(data, |
| MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0); |
| } |
| |
| static int mxt_input_open(struct input_dev *dev) |
| { |
| struct mxt_data *data = input_get_drvdata(dev); |
| |
| mxt_start(data); |
| |
| return 0; |
| } |
| |
| static void mxt_input_close(struct input_dev *dev) |
| { |
| struct mxt_data *data = input_get_drvdata(dev); |
| |
| mxt_stop(data); |
| } |
| |
| #ifdef CONFIG_OF |
| static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) |
| { |
| struct mxt_platform_data *pdata; |
| u32 *keymap; |
| u32 keycode; |
| int proplen, i, ret; |
| |
| if (!client->dev.of_node) |
| return ERR_PTR(-ENODEV); |
| |
| pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return ERR_PTR(-ENOMEM); |
| |
| if (of_find_property(client->dev.of_node, "linux,gpio-keymap", |
| &proplen)) { |
| pdata->t19_num_keys = proplen / sizeof(u32); |
| |
| keymap = devm_kzalloc(&client->dev, |
| pdata->t19_num_keys * sizeof(keymap[0]), |
| GFP_KERNEL); |
| if (!keymap) |
| return ERR_PTR(-ENOMEM); |
| |
| for (i = 0; i < pdata->t19_num_keys; i++) { |
| ret = of_property_read_u32_index(client->dev.of_node, |
| "linux,gpio-keymap", i, &keycode); |
| if (ret) |
| keycode = KEY_RESERVED; |
| |
| keymap[i] = keycode; |
| } |
| |
| pdata->t19_keymap = keymap; |
| } |
| |
| return pdata; |
| } |
| #else |
| static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client) |
| { |
| dev_dbg(&client->dev, "No platform data specified\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| #endif |
| |
| static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) |
| { |
| struct mxt_data *data; |
| const struct mxt_platform_data *pdata; |
| int error; |
| |
| pdata = dev_get_platdata(&client->dev); |
| if (!pdata) { |
| pdata = mxt_parse_dt(client); |
| if (IS_ERR(pdata)) |
| return PTR_ERR(pdata); |
| } |
| |
| data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL); |
| if (!data) { |
| dev_err(&client->dev, "Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0", |
| client->adapter->nr, client->addr); |
| |
| data->client = client; |
| data->pdata = pdata; |
| data->irq = client->irq; |
| i2c_set_clientdata(client, data); |
| |
| init_completion(&data->bl_completion); |
| init_completion(&data->reset_completion); |
| init_completion(&data->crc_completion); |
| |
| error = request_threaded_irq(client->irq, NULL, mxt_interrupt, |
| pdata->irqflags | IRQF_ONESHOT, |
| client->name, data); |
| if (error) { |
| dev_err(&client->dev, "Failed to register interrupt\n"); |
| goto err_free_mem; |
| } |
| |
| disable_irq(client->irq); |
| |
| error = mxt_initialize(data); |
| if (error) |
| goto err_free_irq; |
| |
| error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group); |
| if (error) { |
| dev_err(&client->dev, "Failure %d creating sysfs group\n", |
| error); |
| goto err_free_object; |
| } |
| |
| return 0; |
| |
| err_free_object: |
| mxt_free_input_device(data); |
| mxt_free_object_table(data); |
| err_free_irq: |
| free_irq(client->irq, data); |
| err_free_mem: |
| kfree(data); |
| return error; |
| } |
| |
| static int mxt_remove(struct i2c_client *client) |
| { |
| struct mxt_data *data = i2c_get_clientdata(client); |
| |
| sysfs_remove_group(&client->dev.kobj, &mxt_attr_group); |
| free_irq(data->irq, data); |
| mxt_free_input_device(data); |
| mxt_free_object_table(data); |
| kfree(data); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused mxt_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct mxt_data *data = i2c_get_clientdata(client); |
| struct input_dev *input_dev = data->input_dev; |
| |
| mutex_lock(&input_dev->mutex); |
| |
| if (input_dev->users) |
| mxt_stop(data); |
| |
| mutex_unlock(&input_dev->mutex); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused mxt_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct mxt_data *data = i2c_get_clientdata(client); |
| struct input_dev *input_dev = data->input_dev; |
| |
| mxt_soft_reset(data); |
| |
| mutex_lock(&input_dev->mutex); |
| |
| if (input_dev->users) |
| mxt_start(data); |
| |
| mutex_unlock(&input_dev->mutex); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume); |
| |
| static const struct of_device_id mxt_of_match[] = { |
| { .compatible = "atmel,maxtouch", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mxt_of_match); |
| |
| static const struct i2c_device_id mxt_id[] = { |
| { "qt602240_ts", 0 }, |
| { "atmel_mxt_ts", 0 }, |
| { "atmel_mxt_tp", 0 }, |
| { "mXT224", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mxt_id); |
| |
| static struct i2c_driver mxt_driver = { |
| .driver = { |
| .name = "atmel_mxt_ts", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(mxt_of_match), |
| .pm = &mxt_pm_ops, |
| }, |
| .probe = mxt_probe, |
| .remove = mxt_remove, |
| .id_table = mxt_id, |
| }; |
| |
| module_i2c_driver(mxt_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); |
| MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver"); |
| MODULE_LICENSE("GPL"); |