| /* |
| * File: portdrv_pci.c |
| * Purpose: PCI Express Port Bus Driver |
| * |
| * Copyright (C) 2004 Intel |
| * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/pm.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/init.h> |
| #include <linux/pcieport_if.h> |
| #include <linux/aer.h> |
| #include <linux/dmi.h> |
| #include <linux/pci-aspm.h> |
| |
| #include "portdrv.h" |
| #include "aer/aerdrv.h" |
| |
| /* |
| * Version Information |
| */ |
| #define DRIVER_VERSION "v1.0" |
| #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" |
| #define DRIVER_DESC "PCIe Port Bus Driver" |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| /* If this switch is set, PCIe port native services should not be enabled. */ |
| bool pcie_ports_disabled; |
| |
| /* |
| * If this switch is set, ACPI _OSC will be used to determine whether or not to |
| * enable PCIe port native services. |
| */ |
| bool pcie_ports_auto = true; |
| |
| static int __init pcie_port_setup(char *str) |
| { |
| if (!strncmp(str, "compat", 6)) { |
| pcie_ports_disabled = true; |
| } else if (!strncmp(str, "native", 6)) { |
| pcie_ports_disabled = false; |
| pcie_ports_auto = false; |
| } else if (!strncmp(str, "auto", 4)) { |
| pcie_ports_disabled = false; |
| pcie_ports_auto = true; |
| } |
| |
| return 1; |
| } |
| __setup("pcie_ports=", pcie_port_setup); |
| |
| /* global data */ |
| |
| /** |
| * pcie_clear_root_pme_status - Clear root port PME interrupt status. |
| * @dev: PCIe root port or event collector. |
| */ |
| void pcie_clear_root_pme_status(struct pci_dev *dev) |
| { |
| pcie_capability_set_dword(dev, PCI_EXP_RTSTA, PCI_EXP_RTSTA_PME); |
| } |
| |
| static int pcie_portdrv_restore_config(struct pci_dev *dev) |
| { |
| int retval; |
| |
| retval = pci_enable_device(dev); |
| if (retval) |
| return retval; |
| pci_set_master(dev); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int pcie_port_resume_noirq(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| |
| /* |
| * Some BIOSes forget to clear Root PME Status bits after system wakeup |
| * which breaks ACPI-based runtime wakeup on PCI Express, so clear those |
| * bits now just in case (shouldn't hurt). |
| */ |
| if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) |
| pcie_clear_root_pme_status(pdev); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_RUNTIME |
| struct d3cold_info { |
| bool no_d3cold; |
| unsigned int d3cold_delay; |
| }; |
| |
| static int pci_dev_d3cold_info(struct pci_dev *pdev, void *data) |
| { |
| struct d3cold_info *info = data; |
| |
| info->d3cold_delay = max_t(unsigned int, pdev->d3cold_delay, |
| info->d3cold_delay); |
| if (pdev->no_d3cold) |
| info->no_d3cold = true; |
| return 0; |
| } |
| |
| static int pcie_port_runtime_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct d3cold_info d3cold_info = { |
| .no_d3cold = false, |
| .d3cold_delay = PCI_PM_D3_WAIT, |
| }; |
| |
| /* |
| * If any subordinate device disable D3cold, we should not put |
| * the port into D3cold. The D3cold delay of port should be |
| * the max of that of all subordinate devices. |
| */ |
| pci_walk_bus(pdev->subordinate, pci_dev_d3cold_info, &d3cold_info); |
| pdev->no_d3cold = d3cold_info.no_d3cold; |
| pdev->d3cold_delay = d3cold_info.d3cold_delay; |
| return 0; |
| } |
| |
| static int pcie_port_runtime_resume(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static int pci_dev_pme_poll(struct pci_dev *pdev, void *data) |
| { |
| bool *pme_poll = data; |
| |
| if (pdev->pme_poll) |
| *pme_poll = true; |
| return 0; |
| } |
| |
| static int pcie_port_runtime_idle(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| bool pme_poll = false; |
| |
| /* |
| * If any subordinate device needs pme poll, we should keep |
| * the port in D0, because we need port in D0 to poll it. |
| */ |
| pci_walk_bus(pdev->subordinate, pci_dev_pme_poll, &pme_poll); |
| /* Delay for a short while to prevent too frequent suspend/resume */ |
| if (!pme_poll) |
| pm_schedule_suspend(dev, 10); |
| return -EBUSY; |
| } |
| #else |
| #define pcie_port_runtime_suspend NULL |
| #define pcie_port_runtime_resume NULL |
| #define pcie_port_runtime_idle NULL |
| #endif |
| |
| static const struct dev_pm_ops pcie_portdrv_pm_ops = { |
| .suspend = pcie_port_device_suspend, |
| .resume = pcie_port_device_resume, |
| .freeze = pcie_port_device_suspend, |
| .thaw = pcie_port_device_resume, |
| .poweroff = pcie_port_device_suspend, |
| .restore = pcie_port_device_resume, |
| .resume_noirq = pcie_port_resume_noirq, |
| .runtime_suspend = pcie_port_runtime_suspend, |
| .runtime_resume = pcie_port_runtime_resume, |
| .runtime_idle = pcie_port_runtime_idle, |
| }; |
| |
| #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) |
| |
| #else /* !PM */ |
| |
| #define PCIE_PORTDRV_PM_OPS NULL |
| #endif /* !PM */ |
| |
| /* |
| * PCIe port runtime suspend is broken for some chipsets, so use a |
| * black list to disable runtime PM for these chipsets. |
| */ |
| static const struct pci_device_id port_runtime_pm_black_list[] = { |
| { /* end: all zeroes */ } |
| }; |
| |
| /* |
| * pcie_portdrv_probe - Probe PCI-Express port devices |
| * @dev: PCI-Express port device being probed |
| * |
| * If detected invokes the pcie_port_device_register() method for |
| * this port device. |
| * |
| */ |
| static int pcie_portdrv_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| int status; |
| |
| if (!pci_is_pcie(dev) || |
| ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) && |
| (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) && |
| (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))) |
| return -ENODEV; |
| |
| if (!dev->irq && dev->pin) { |
| dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; " |
| "check vendor BIOS\n", dev->vendor, dev->device); |
| } |
| status = pcie_port_device_register(dev); |
| if (status) |
| return status; |
| |
| pci_save_state(dev); |
| /* |
| * D3cold may not work properly on some PCIe port, so disable |
| * it by default. |
| */ |
| dev->d3cold_allowed = false; |
| if (!pci_match_id(port_runtime_pm_black_list, dev)) |
| pm_runtime_put_noidle(&dev->dev); |
| |
| return 0; |
| } |
| |
| static void pcie_portdrv_remove(struct pci_dev *dev) |
| { |
| if (!pci_match_id(port_runtime_pm_black_list, dev)) |
| pm_runtime_get_noresume(&dev->dev); |
| pcie_port_device_remove(dev); |
| pci_disable_device(dev); |
| } |
| |
| static int error_detected_iter(struct device *device, void *data) |
| { |
| struct pcie_device *pcie_device; |
| struct pcie_port_service_driver *driver; |
| struct aer_broadcast_data *result_data; |
| pci_ers_result_t status; |
| |
| result_data = (struct aer_broadcast_data *) data; |
| |
| if (device->bus == &pcie_port_bus_type && device->driver) { |
| driver = to_service_driver(device->driver); |
| if (!driver || |
| !driver->err_handler || |
| !driver->err_handler->error_detected) |
| return 0; |
| |
| pcie_device = to_pcie_device(device); |
| |
| /* Forward error detected message to service drivers */ |
| status = driver->err_handler->error_detected( |
| pcie_device->port, |
| result_data->state); |
| result_data->result = |
| merge_result(result_data->result, status); |
| } |
| |
| return 0; |
| } |
| |
| static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev, |
| enum pci_channel_state error) |
| { |
| struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER}; |
| int ret; |
| |
| /* can not fail */ |
| ret = device_for_each_child(&dev->dev, &data, error_detected_iter); |
| |
| return data.result; |
| } |
| |
| static int mmio_enabled_iter(struct device *device, void *data) |
| { |
| struct pcie_device *pcie_device; |
| struct pcie_port_service_driver *driver; |
| pci_ers_result_t status, *result; |
| |
| result = (pci_ers_result_t *) data; |
| |
| if (device->bus == &pcie_port_bus_type && device->driver) { |
| driver = to_service_driver(device->driver); |
| if (driver && |
| driver->err_handler && |
| driver->err_handler->mmio_enabled) { |
| pcie_device = to_pcie_device(device); |
| |
| /* Forward error message to service drivers */ |
| status = driver->err_handler->mmio_enabled( |
| pcie_device->port); |
| *result = merge_result(*result, status); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static pci_ers_result_t pcie_portdrv_mmio_enabled(struct pci_dev *dev) |
| { |
| pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; |
| int retval; |
| |
| /* get true return value from &status */ |
| retval = device_for_each_child(&dev->dev, &status, mmio_enabled_iter); |
| return status; |
| } |
| |
| static int slot_reset_iter(struct device *device, void *data) |
| { |
| struct pcie_device *pcie_device; |
| struct pcie_port_service_driver *driver; |
| pci_ers_result_t status, *result; |
| |
| result = (pci_ers_result_t *) data; |
| |
| if (device->bus == &pcie_port_bus_type && device->driver) { |
| driver = to_service_driver(device->driver); |
| if (driver && |
| driver->err_handler && |
| driver->err_handler->slot_reset) { |
| pcie_device = to_pcie_device(device); |
| |
| /* Forward error message to service drivers */ |
| status = driver->err_handler->slot_reset( |
| pcie_device->port); |
| *result = merge_result(*result, status); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev) |
| { |
| pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; |
| int retval; |
| |
| /* If fatal, restore cfg space for possible link reset at upstream */ |
| if (dev->error_state == pci_channel_io_frozen) { |
| dev->state_saved = true; |
| pci_restore_state(dev); |
| pcie_portdrv_restore_config(dev); |
| pci_enable_pcie_error_reporting(dev); |
| } |
| |
| /* get true return value from &status */ |
| retval = device_for_each_child(&dev->dev, &status, slot_reset_iter); |
| |
| return status; |
| } |
| |
| static int resume_iter(struct device *device, void *data) |
| { |
| struct pcie_device *pcie_device; |
| struct pcie_port_service_driver *driver; |
| |
| if (device->bus == &pcie_port_bus_type && device->driver) { |
| driver = to_service_driver(device->driver); |
| if (driver && |
| driver->err_handler && |
| driver->err_handler->resume) { |
| pcie_device = to_pcie_device(device); |
| |
| /* Forward error message to service drivers */ |
| driver->err_handler->resume(pcie_device->port); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void pcie_portdrv_err_resume(struct pci_dev *dev) |
| { |
| int retval; |
| /* nothing to do with error value, if it ever happens */ |
| retval = device_for_each_child(&dev->dev, NULL, resume_iter); |
| } |
| |
| /* |
| * LINUX Device Driver Model |
| */ |
| static const struct pci_device_id port_pci_ids[] = { { |
| /* handle any PCI-Express port */ |
| PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0), |
| }, { /* end: all zeroes */ } |
| }; |
| MODULE_DEVICE_TABLE(pci, port_pci_ids); |
| |
| static const struct pci_error_handlers pcie_portdrv_err_handler = { |
| .error_detected = pcie_portdrv_error_detected, |
| .mmio_enabled = pcie_portdrv_mmio_enabled, |
| .slot_reset = pcie_portdrv_slot_reset, |
| .resume = pcie_portdrv_err_resume, |
| }; |
| |
| static struct pci_driver pcie_portdriver = { |
| .name = "pcieport", |
| .id_table = &port_pci_ids[0], |
| |
| .probe = pcie_portdrv_probe, |
| .remove = pcie_portdrv_remove, |
| |
| .err_handler = &pcie_portdrv_err_handler, |
| |
| .driver.pm = PCIE_PORTDRV_PM_OPS, |
| }; |
| |
| static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d) |
| { |
| pr_notice("%s detected: will not use MSI for PCIe PME signaling\n", |
| d->ident); |
| pcie_pme_disable_msi(); |
| return 0; |
| } |
| |
| static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = { |
| /* |
| * Boxes that should not use MSI for PCIe PME signaling. |
| */ |
| { |
| .callback = dmi_pcie_pme_disable_msi, |
| .ident = "MSI Wind U-100", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, |
| "MICRO-STAR INTERNATIONAL CO., LTD"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "U-100"), |
| }, |
| }, |
| {} |
| }; |
| |
| static int __init pcie_portdrv_init(void) |
| { |
| int retval; |
| |
| if (pcie_ports_disabled) |
| return pci_register_driver(&pcie_portdriver); |
| |
| dmi_check_system(pcie_portdrv_dmi_table); |
| |
| retval = pcie_port_bus_register(); |
| if (retval) { |
| printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval); |
| goto out; |
| } |
| retval = pci_register_driver(&pcie_portdriver); |
| if (retval) |
| pcie_port_bus_unregister(); |
| out: |
| return retval; |
| } |
| |
| module_init(pcie_portdrv_init); |