| /* |
| * w1-gpio - GPIO w1 bus master driver |
| * |
| * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/w1-gpio.h> |
| #include <linux/gpio.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_gpio.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| |
| #include "../w1.h" |
| #include "../w1_int.h" |
| |
| static void w1_gpio_write_bit_dir(void *data, u8 bit) |
| { |
| struct w1_gpio_platform_data *pdata = data; |
| |
| if (bit) |
| gpio_direction_input(pdata->pin); |
| else |
| gpio_direction_output(pdata->pin, 0); |
| } |
| |
| static void w1_gpio_write_bit_val(void *data, u8 bit) |
| { |
| struct w1_gpio_platform_data *pdata = data; |
| |
| gpio_set_value(pdata->pin, bit); |
| } |
| |
| static u8 w1_gpio_read_bit(void *data) |
| { |
| struct w1_gpio_platform_data *pdata = data; |
| |
| return gpio_get_value(pdata->pin) ? 1 : 0; |
| } |
| |
| #if defined(CONFIG_OF) |
| static struct of_device_id w1_gpio_dt_ids[] = { |
| { .compatible = "w1-gpio" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids); |
| #endif |
| |
| static int w1_gpio_probe_dt(struct platform_device *pdev) |
| { |
| struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; |
| struct device_node *np = pdev->dev.of_node; |
| int gpio; |
| |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| if (of_get_property(np, "linux,open-drain", NULL)) |
| pdata->is_open_drain = 1; |
| |
| gpio = of_get_gpio(np, 0); |
| if (gpio < 0) |
| return gpio; |
| pdata->pin = gpio; |
| |
| pdata->ext_pullup_enable_pin = of_get_gpio(np, 1); |
| pdev->dev.platform_data = pdata; |
| |
| return 0; |
| } |
| |
| static int w1_gpio_probe(struct platform_device *pdev) |
| { |
| struct w1_bus_master *master; |
| struct w1_gpio_platform_data *pdata; |
| int err; |
| |
| if (of_have_populated_dt()) { |
| err = w1_gpio_probe_dt(pdev); |
| if (err < 0) { |
| dev_err(&pdev->dev, "Failed to parse DT\n"); |
| return err; |
| } |
| } |
| |
| pdata = pdev->dev.platform_data; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "No configuration data\n"); |
| return -ENXIO; |
| } |
| |
| master = devm_kzalloc(&pdev->dev, sizeof(struct w1_bus_master), |
| GFP_KERNEL); |
| if (!master) { |
| dev_err(&pdev->dev, "Out of memory\n"); |
| return -ENOMEM; |
| } |
| |
| err = devm_gpio_request(&pdev->dev, pdata->pin, "w1"); |
| if (err) { |
| dev_err(&pdev->dev, "gpio_request (pin) failed\n"); |
| return err; |
| } |
| |
| if (gpio_is_valid(pdata->ext_pullup_enable_pin)) { |
| err = devm_gpio_request_one(&pdev->dev, |
| pdata->ext_pullup_enable_pin, GPIOF_INIT_LOW, |
| "w1 pullup"); |
| if (err < 0) { |
| dev_err(&pdev->dev, "gpio_request_one " |
| "(ext_pullup_enable_pin) failed\n"); |
| return err; |
| } |
| } |
| |
| master->data = pdata; |
| master->read_bit = w1_gpio_read_bit; |
| |
| if (pdata->is_open_drain) { |
| gpio_direction_output(pdata->pin, 1); |
| master->write_bit = w1_gpio_write_bit_val; |
| } else { |
| gpio_direction_input(pdata->pin); |
| master->write_bit = w1_gpio_write_bit_dir; |
| } |
| |
| err = w1_add_master_device(master); |
| if (err) { |
| dev_err(&pdev->dev, "w1_add_master device failed\n"); |
| return err; |
| } |
| |
| if (pdata->enable_external_pullup) |
| pdata->enable_external_pullup(1); |
| |
| if (gpio_is_valid(pdata->ext_pullup_enable_pin)) |
| gpio_set_value(pdata->ext_pullup_enable_pin, 1); |
| |
| platform_set_drvdata(pdev, master); |
| |
| return 0; |
| } |
| |
| static int w1_gpio_remove(struct platform_device *pdev) |
| { |
| struct w1_bus_master *master = platform_get_drvdata(pdev); |
| struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; |
| |
| if (pdata->enable_external_pullup) |
| pdata->enable_external_pullup(0); |
| |
| if (gpio_is_valid(pdata->ext_pullup_enable_pin)) |
| gpio_set_value(pdata->ext_pullup_enable_pin, 0); |
| |
| w1_remove_master_device(master); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int w1_gpio_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; |
| |
| if (pdata->enable_external_pullup) |
| pdata->enable_external_pullup(0); |
| |
| return 0; |
| } |
| |
| static int w1_gpio_resume(struct platform_device *pdev) |
| { |
| struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; |
| |
| if (pdata->enable_external_pullup) |
| pdata->enable_external_pullup(1); |
| |
| return 0; |
| } |
| |
| #else |
| #define w1_gpio_suspend NULL |
| #define w1_gpio_resume NULL |
| #endif |
| |
| static struct platform_driver w1_gpio_driver = { |
| .driver = { |
| .name = "w1-gpio", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(w1_gpio_dt_ids), |
| }, |
| .probe = w1_gpio_probe, |
| .remove = w1_gpio_remove, |
| .suspend = w1_gpio_suspend, |
| .resume = w1_gpio_resume, |
| }; |
| |
| module_platform_driver(w1_gpio_driver); |
| |
| MODULE_DESCRIPTION("GPIO w1 bus master driver"); |
| MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>"); |
| MODULE_LICENSE("GPL"); |