| /* |
| * Generic helpers for smp ipi calls |
| * |
| * (C) Jens Axboe <jens.axboe@oracle.com> 2008 |
| */ |
| #include <linux/rcupdate.h> |
| #include <linux/rculist.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/percpu.h> |
| #include <linux/init.h> |
| #include <linux/gfp.h> |
| #include <linux/smp.h> |
| #include <linux/cpu.h> |
| |
| static struct { |
| struct list_head queue; |
| raw_spinlock_t lock; |
| } call_function __cacheline_aligned_in_smp = |
| { |
| .queue = LIST_HEAD_INIT(call_function.queue), |
| .lock = __RAW_SPIN_LOCK_UNLOCKED(call_function.lock), |
| }; |
| |
| enum { |
| CSD_FLAG_LOCK = 0x01, |
| }; |
| |
| struct call_function_data { |
| struct call_single_data csd; |
| atomic_t refs; |
| cpumask_var_t cpumask; |
| }; |
| |
| static DEFINE_PER_CPU_SHARED_ALIGNED(struct call_function_data, cfd_data); |
| |
| struct call_single_queue { |
| struct list_head list; |
| raw_spinlock_t lock; |
| }; |
| |
| static DEFINE_PER_CPU_SHARED_ALIGNED(struct call_single_queue, call_single_queue); |
| |
| static int |
| hotplug_cfd(struct notifier_block *nfb, unsigned long action, void *hcpu) |
| { |
| long cpu = (long)hcpu; |
| struct call_function_data *cfd = &per_cpu(cfd_data, cpu); |
| |
| switch (action) { |
| case CPU_UP_PREPARE: |
| case CPU_UP_PREPARE_FROZEN: |
| if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL, |
| cpu_to_node(cpu))) |
| return notifier_from_errno(-ENOMEM); |
| break; |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| case CPU_UP_CANCELED: |
| case CPU_UP_CANCELED_FROZEN: |
| |
| case CPU_DEAD: |
| case CPU_DEAD_FROZEN: |
| free_cpumask_var(cfd->cpumask); |
| break; |
| #endif |
| }; |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block __cpuinitdata hotplug_cfd_notifier = { |
| .notifier_call = hotplug_cfd, |
| }; |
| |
| static int __cpuinit init_call_single_data(void) |
| { |
| void *cpu = (void *)(long)smp_processor_id(); |
| int i; |
| |
| for_each_possible_cpu(i) { |
| struct call_single_queue *q = &per_cpu(call_single_queue, i); |
| |
| raw_spin_lock_init(&q->lock); |
| INIT_LIST_HEAD(&q->list); |
| } |
| |
| hotplug_cfd(&hotplug_cfd_notifier, CPU_UP_PREPARE, cpu); |
| register_cpu_notifier(&hotplug_cfd_notifier); |
| |
| return 0; |
| } |
| early_initcall(init_call_single_data); |
| |
| /* |
| * csd_lock/csd_unlock used to serialize access to per-cpu csd resources |
| * |
| * For non-synchronous ipi calls the csd can still be in use by the |
| * previous function call. For multi-cpu calls its even more interesting |
| * as we'll have to ensure no other cpu is observing our csd. |
| */ |
| static void csd_lock_wait(struct call_single_data *data) |
| { |
| while (data->flags & CSD_FLAG_LOCK) |
| cpu_relax(); |
| } |
| |
| static void csd_lock(struct call_single_data *data) |
| { |
| csd_lock_wait(data); |
| data->flags = CSD_FLAG_LOCK; |
| |
| /* |
| * prevent CPU from reordering the above assignment |
| * to ->flags with any subsequent assignments to other |
| * fields of the specified call_single_data structure: |
| */ |
| smp_mb(); |
| } |
| |
| static void csd_unlock(struct call_single_data *data) |
| { |
| WARN_ON(!(data->flags & CSD_FLAG_LOCK)); |
| |
| /* |
| * ensure we're all done before releasing data: |
| */ |
| smp_mb(); |
| |
| data->flags &= ~CSD_FLAG_LOCK; |
| } |
| |
| /* |
| * Insert a previously allocated call_single_data element |
| * for execution on the given CPU. data must already have |
| * ->func, ->info, and ->flags set. |
| */ |
| static |
| void generic_exec_single(int cpu, struct call_single_data *data, int wait) |
| { |
| struct call_single_queue *dst = &per_cpu(call_single_queue, cpu); |
| unsigned long flags; |
| int ipi; |
| |
| raw_spin_lock_irqsave(&dst->lock, flags); |
| ipi = list_empty(&dst->list); |
| list_add_tail(&data->list, &dst->list); |
| raw_spin_unlock_irqrestore(&dst->lock, flags); |
| |
| /* |
| * The list addition should be visible before sending the IPI |
| * handler locks the list to pull the entry off it because of |
| * normal cache coherency rules implied by spinlocks. |
| * |
| * If IPIs can go out of order to the cache coherency protocol |
| * in an architecture, sufficient synchronisation should be added |
| * to arch code to make it appear to obey cache coherency WRT |
| * locking and barrier primitives. Generic code isn't really |
| * equipped to do the right thing... |
| */ |
| if (ipi) |
| arch_send_call_function_single_ipi(cpu); |
| |
| if (wait) |
| csd_lock_wait(data); |
| } |
| |
| /* |
| * Invoked by arch to handle an IPI for call function. Must be called with |
| * interrupts disabled. |
| */ |
| void generic_smp_call_function_interrupt(void) |
| { |
| struct call_function_data *data; |
| int cpu = smp_processor_id(); |
| |
| /* |
| * Shouldn't receive this interrupt on a cpu that is not yet online. |
| */ |
| WARN_ON_ONCE(!cpu_online(cpu)); |
| |
| /* |
| * Ensure entry is visible on call_function_queue after we have |
| * entered the IPI. See comment in smp_call_function_many. |
| * If we don't have this, then we may miss an entry on the list |
| * and never get another IPI to process it. |
| */ |
| smp_mb(); |
| |
| /* |
| * It's ok to use list_for_each_rcu() here even though we may |
| * delete 'pos', since list_del_rcu() doesn't clear ->next |
| */ |
| list_for_each_entry_rcu(data, &call_function.queue, csd.list) { |
| int refs; |
| |
| if (!cpumask_test_and_clear_cpu(cpu, data->cpumask)) |
| continue; |
| |
| data->csd.func(data->csd.info); |
| |
| refs = atomic_dec_return(&data->refs); |
| WARN_ON(refs < 0); |
| if (!refs) { |
| raw_spin_lock(&call_function.lock); |
| list_del_rcu(&data->csd.list); |
| raw_spin_unlock(&call_function.lock); |
| } |
| |
| if (refs) |
| continue; |
| |
| csd_unlock(&data->csd); |
| } |
| |
| } |
| |
| /* |
| * Invoked by arch to handle an IPI for call function single. Must be |
| * called from the arch with interrupts disabled. |
| */ |
| void generic_smp_call_function_single_interrupt(void) |
| { |
| struct call_single_queue *q = &__get_cpu_var(call_single_queue); |
| unsigned int data_flags; |
| LIST_HEAD(list); |
| |
| /* |
| * Shouldn't receive this interrupt on a cpu that is not yet online. |
| */ |
| WARN_ON_ONCE(!cpu_online(smp_processor_id())); |
| |
| raw_spin_lock(&q->lock); |
| list_replace_init(&q->list, &list); |
| raw_spin_unlock(&q->lock); |
| |
| while (!list_empty(&list)) { |
| struct call_single_data *data; |
| |
| data = list_entry(list.next, struct call_single_data, list); |
| list_del(&data->list); |
| |
| /* |
| * 'data' can be invalid after this call if flags == 0 |
| * (when called through generic_exec_single()), |
| * so save them away before making the call: |
| */ |
| data_flags = data->flags; |
| |
| data->func(data->info); |
| |
| /* |
| * Unlocked CSDs are valid through generic_exec_single(): |
| */ |
| if (data_flags & CSD_FLAG_LOCK) |
| csd_unlock(data); |
| } |
| } |
| |
| static DEFINE_PER_CPU_SHARED_ALIGNED(struct call_single_data, csd_data); |
| |
| /* |
| * smp_call_function_single - Run a function on a specific CPU |
| * @func: The function to run. This must be fast and non-blocking. |
| * @info: An arbitrary pointer to pass to the function. |
| * @wait: If true, wait until function has completed on other CPUs. |
| * |
| * Returns 0 on success, else a negative status code. |
| */ |
| int smp_call_function_single(int cpu, smp_call_func_t func, void *info, |
| int wait) |
| { |
| struct call_single_data d = { |
| .flags = 0, |
| }; |
| unsigned long flags; |
| int this_cpu; |
| int err = 0; |
| |
| /* |
| * prevent preemption and reschedule on another processor, |
| * as well as CPU removal |
| */ |
| this_cpu = get_cpu(); |
| |
| /* |
| * Can deadlock when called with interrupts disabled. |
| * We allow cpu's that are not yet online though, as no one else can |
| * send smp call function interrupt to this cpu and as such deadlocks |
| * can't happen. |
| */ |
| WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled() |
| && !oops_in_progress); |
| |
| if (cpu == this_cpu) { |
| local_irq_save(flags); |
| func(info); |
| local_irq_restore(flags); |
| } else { |
| if ((unsigned)cpu < nr_cpu_ids && cpu_online(cpu)) { |
| struct call_single_data *data = &d; |
| |
| if (!wait) |
| data = &__get_cpu_var(csd_data); |
| |
| csd_lock(data); |
| |
| data->func = func; |
| data->info = info; |
| generic_exec_single(cpu, data, wait); |
| } else { |
| err = -ENXIO; /* CPU not online */ |
| } |
| } |
| |
| put_cpu(); |
| |
| return err; |
| } |
| EXPORT_SYMBOL(smp_call_function_single); |
| |
| /* |
| * smp_call_function_any - Run a function on any of the given cpus |
| * @mask: The mask of cpus it can run on. |
| * @func: The function to run. This must be fast and non-blocking. |
| * @info: An arbitrary pointer to pass to the function. |
| * @wait: If true, wait until function has completed. |
| * |
| * Returns 0 on success, else a negative status code (if no cpus were online). |
| * Note that @wait will be implicitly turned on in case of allocation failures, |
| * since we fall back to on-stack allocation. |
| * |
| * Selection preference: |
| * 1) current cpu if in @mask |
| * 2) any cpu of current node if in @mask |
| * 3) any other online cpu in @mask |
| */ |
| int smp_call_function_any(const struct cpumask *mask, |
| smp_call_func_t func, void *info, int wait) |
| { |
| unsigned int cpu; |
| const struct cpumask *nodemask; |
| int ret; |
| |
| /* Try for same CPU (cheapest) */ |
| cpu = get_cpu(); |
| if (cpumask_test_cpu(cpu, mask)) |
| goto call; |
| |
| /* Try for same node. */ |
| nodemask = cpumask_of_node(cpu_to_node(cpu)); |
| for (cpu = cpumask_first_and(nodemask, mask); cpu < nr_cpu_ids; |
| cpu = cpumask_next_and(cpu, nodemask, mask)) { |
| if (cpu_online(cpu)) |
| goto call; |
| } |
| |
| /* Any online will do: smp_call_function_single handles nr_cpu_ids. */ |
| cpu = cpumask_any_and(mask, cpu_online_mask); |
| call: |
| ret = smp_call_function_single(cpu, func, info, wait); |
| put_cpu(); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(smp_call_function_any); |
| |
| /** |
| * __smp_call_function_single(): Run a function on a specific CPU |
| * @cpu: The CPU to run on. |
| * @data: Pre-allocated and setup data structure |
| * @wait: If true, wait until function has completed on specified CPU. |
| * |
| * Like smp_call_function_single(), but allow caller to pass in a |
| * pre-allocated data structure. Useful for embedding @data inside |
| * other structures, for instance. |
| */ |
| void __smp_call_function_single(int cpu, struct call_single_data *data, |
| int wait) |
| { |
| unsigned int this_cpu; |
| unsigned long flags; |
| |
| this_cpu = get_cpu(); |
| /* |
| * Can deadlock when called with interrupts disabled. |
| * We allow cpu's that are not yet online though, as no one else can |
| * send smp call function interrupt to this cpu and as such deadlocks |
| * can't happen. |
| */ |
| WARN_ON_ONCE(cpu_online(smp_processor_id()) && wait && irqs_disabled() |
| && !oops_in_progress); |
| |
| if (cpu == this_cpu) { |
| local_irq_save(flags); |
| data->func(data->info); |
| local_irq_restore(flags); |
| } else { |
| csd_lock(data); |
| generic_exec_single(cpu, data, wait); |
| } |
| put_cpu(); |
| } |
| |
| /** |
| * smp_call_function_many(): Run a function on a set of other CPUs. |
| * @mask: The set of cpus to run on (only runs on online subset). |
| * @func: The function to run. This must be fast and non-blocking. |
| * @info: An arbitrary pointer to pass to the function. |
| * @wait: If true, wait (atomically) until function has completed |
| * on other CPUs. |
| * |
| * If @wait is true, then returns once @func has returned. |
| * |
| * You must not call this function with disabled interrupts or from a |
| * hardware interrupt handler or from a bottom half handler. Preemption |
| * must be disabled when calling this function. |
| */ |
| void smp_call_function_many(const struct cpumask *mask, |
| smp_call_func_t func, void *info, bool wait) |
| { |
| struct call_function_data *data; |
| unsigned long flags; |
| int cpu, next_cpu, this_cpu = smp_processor_id(); |
| |
| /* |
| * Can deadlock when called with interrupts disabled. |
| * We allow cpu's that are not yet online though, as no one else can |
| * send smp call function interrupt to this cpu and as such deadlocks |
| * can't happen. |
| */ |
| WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled() |
| && !oops_in_progress); |
| |
| /* So, what's a CPU they want? Ignoring this one. */ |
| cpu = cpumask_first_and(mask, cpu_online_mask); |
| if (cpu == this_cpu) |
| cpu = cpumask_next_and(cpu, mask, cpu_online_mask); |
| |
| /* No online cpus? We're done. */ |
| if (cpu >= nr_cpu_ids) |
| return; |
| |
| /* Do we have another CPU which isn't us? */ |
| next_cpu = cpumask_next_and(cpu, mask, cpu_online_mask); |
| if (next_cpu == this_cpu) |
| next_cpu = cpumask_next_and(next_cpu, mask, cpu_online_mask); |
| |
| /* Fastpath: do that cpu by itself. */ |
| if (next_cpu >= nr_cpu_ids) { |
| smp_call_function_single(cpu, func, info, wait); |
| return; |
| } |
| |
| data = &__get_cpu_var(cfd_data); |
| csd_lock(&data->csd); |
| |
| data->csd.func = func; |
| data->csd.info = info; |
| cpumask_and(data->cpumask, mask, cpu_online_mask); |
| cpumask_clear_cpu(this_cpu, data->cpumask); |
| atomic_set(&data->refs, cpumask_weight(data->cpumask)); |
| |
| raw_spin_lock_irqsave(&call_function.lock, flags); |
| /* |
| * Place entry at the _HEAD_ of the list, so that any cpu still |
| * observing the entry in generic_smp_call_function_interrupt() |
| * will not miss any other list entries: |
| */ |
| list_add_rcu(&data->csd.list, &call_function.queue); |
| raw_spin_unlock_irqrestore(&call_function.lock, flags); |
| |
| /* |
| * Make the list addition visible before sending the ipi. |
| * (IPIs must obey or appear to obey normal Linux cache |
| * coherency rules -- see comment in generic_exec_single). |
| */ |
| smp_mb(); |
| |
| /* Send a message to all CPUs in the map */ |
| arch_send_call_function_ipi_mask(data->cpumask); |
| |
| /* Optionally wait for the CPUs to complete */ |
| if (wait) |
| csd_lock_wait(&data->csd); |
| } |
| EXPORT_SYMBOL(smp_call_function_many); |
| |
| /** |
| * smp_call_function(): Run a function on all other CPUs. |
| * @func: The function to run. This must be fast and non-blocking. |
| * @info: An arbitrary pointer to pass to the function. |
| * @wait: If true, wait (atomically) until function has completed |
| * on other CPUs. |
| * |
| * Returns 0. |
| * |
| * If @wait is true, then returns once @func has returned; otherwise |
| * it returns just before the target cpu calls @func. |
| * |
| * You must not call this function with disabled interrupts or from a |
| * hardware interrupt handler or from a bottom half handler. |
| */ |
| int smp_call_function(smp_call_func_t func, void *info, int wait) |
| { |
| preempt_disable(); |
| smp_call_function_many(cpu_online_mask, func, info, wait); |
| preempt_enable(); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(smp_call_function); |
| |
| void ipi_call_lock(void) |
| { |
| raw_spin_lock(&call_function.lock); |
| } |
| |
| void ipi_call_unlock(void) |
| { |
| raw_spin_unlock(&call_function.lock); |
| } |
| |
| void ipi_call_lock_irq(void) |
| { |
| raw_spin_lock_irq(&call_function.lock); |
| } |
| |
| void ipi_call_unlock_irq(void) |
| { |
| raw_spin_unlock_irq(&call_function.lock); |
| } |