| /* |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| */ |
| |
| /* |
| * entry.S contains the system-call and fault low-level handling routines. |
| * This also contains the timer-interrupt handler, as well as all interrupts |
| * and faults that can result in a task-switch. |
| * |
| * NOTE: This code handles signal-recognition, which happens every time |
| * after a timer-interrupt and after each system call. |
| * |
| * I changed all the .align's to 4 (16 byte alignment), as that's faster |
| * on a 486. |
| * |
| * Stack layout in 'syscall_exit': |
| * ptrace needs to have all regs on the stack. |
| * if the order here is changed, it needs to be |
| * updated in fork.c:copy_process, signal.c:do_signal, |
| * ptrace.c and ptrace.h |
| * |
| * 0(%esp) - %ebx |
| * 4(%esp) - %ecx |
| * 8(%esp) - %edx |
| * C(%esp) - %esi |
| * 10(%esp) - %edi |
| * 14(%esp) - %ebp |
| * 18(%esp) - %eax |
| * 1C(%esp) - %ds |
| * 20(%esp) - %es |
| * 24(%esp) - %fs |
| * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS |
| * 2C(%esp) - orig_eax |
| * 30(%esp) - %eip |
| * 34(%esp) - %cs |
| * 38(%esp) - %eflags |
| * 3C(%esp) - %oldesp |
| * 40(%esp) - %oldss |
| * |
| * "current" is in register %ebx during any slow entries. |
| */ |
| |
| #include <linux/linkage.h> |
| #include <asm/thread_info.h> |
| #include <asm/irqflags.h> |
| #include <asm/errno.h> |
| #include <asm/segment.h> |
| #include <asm/smp.h> |
| #include <asm/page_types.h> |
| #include <asm/percpu.h> |
| #include <asm/dwarf2.h> |
| #include <asm/processor-flags.h> |
| #include <asm/ftrace.h> |
| #include <asm/irq_vectors.h> |
| |
| /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ |
| #include <linux/elf-em.h> |
| #define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) |
| #define __AUDIT_ARCH_LE 0x40000000 |
| |
| #ifndef CONFIG_AUDITSYSCALL |
| #define sysenter_audit syscall_trace_entry |
| #define sysexit_audit syscall_exit_work |
| #endif |
| |
| /* |
| * We use macros for low-level operations which need to be overridden |
| * for paravirtualization. The following will never clobber any registers: |
| * INTERRUPT_RETURN (aka. "iret") |
| * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax") |
| * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit"). |
| * |
| * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must |
| * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY). |
| * Allowing a register to be clobbered can shrink the paravirt replacement |
| * enough to patch inline, increasing performance. |
| */ |
| |
| #define nr_syscalls ((syscall_table_size)/4) |
| |
| #ifdef CONFIG_PREEMPT |
| #define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF |
| #else |
| #define preempt_stop(clobbers) |
| #define resume_kernel restore_all |
| #endif |
| |
| .macro TRACE_IRQS_IRET |
| #ifdef CONFIG_TRACE_IRQFLAGS |
| testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off? |
| jz 1f |
| TRACE_IRQS_ON |
| 1: |
| #endif |
| .endm |
| |
| #ifdef CONFIG_VM86 |
| #define resume_userspace_sig check_userspace |
| #else |
| #define resume_userspace_sig resume_userspace |
| #endif |
| |
| /* |
| * User gs save/restore |
| * |
| * %gs is used for userland TLS and kernel only uses it for stack |
| * canary which is required to be at %gs:20 by gcc. Read the comment |
| * at the top of stackprotector.h for more info. |
| * |
| * Local labels 98 and 99 are used. |
| */ |
| #ifdef CONFIG_X86_32_LAZY_GS |
| |
| /* unfortunately push/pop can't be no-op */ |
| .macro PUSH_GS |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| .endm |
| .macro POP_GS pop=0 |
| addl $(4 + \pop), %esp |
| CFI_ADJUST_CFA_OFFSET -(4 + \pop) |
| .endm |
| .macro POP_GS_EX |
| .endm |
| |
| /* all the rest are no-op */ |
| .macro PTGS_TO_GS |
| .endm |
| .macro PTGS_TO_GS_EX |
| .endm |
| .macro GS_TO_REG reg |
| .endm |
| .macro REG_TO_PTGS reg |
| .endm |
| .macro SET_KERNEL_GS reg |
| .endm |
| |
| #else /* CONFIG_X86_32_LAZY_GS */ |
| |
| .macro PUSH_GS |
| pushl %gs |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET gs, 0*/ |
| .endm |
| |
| .macro POP_GS pop=0 |
| 98: popl %gs |
| CFI_ADJUST_CFA_OFFSET -4 |
| /*CFI_RESTORE gs*/ |
| .if \pop <> 0 |
| add $\pop, %esp |
| CFI_ADJUST_CFA_OFFSET -\pop |
| .endif |
| .endm |
| .macro POP_GS_EX |
| .pushsection .fixup, "ax" |
| 99: movl $0, (%esp) |
| jmp 98b |
| .section __ex_table, "a" |
| .align 4 |
| .long 98b, 99b |
| .popsection |
| .endm |
| |
| .macro PTGS_TO_GS |
| 98: mov PT_GS(%esp), %gs |
| .endm |
| .macro PTGS_TO_GS_EX |
| .pushsection .fixup, "ax" |
| 99: movl $0, PT_GS(%esp) |
| jmp 98b |
| .section __ex_table, "a" |
| .align 4 |
| .long 98b, 99b |
| .popsection |
| .endm |
| |
| .macro GS_TO_REG reg |
| movl %gs, \reg |
| /*CFI_REGISTER gs, \reg*/ |
| .endm |
| .macro REG_TO_PTGS reg |
| movl \reg, PT_GS(%esp) |
| /*CFI_REL_OFFSET gs, PT_GS*/ |
| .endm |
| .macro SET_KERNEL_GS reg |
| movl $(__KERNEL_STACK_CANARY), \reg |
| movl \reg, %gs |
| .endm |
| |
| #endif /* CONFIG_X86_32_LAZY_GS */ |
| |
| .macro SAVE_ALL |
| cld |
| PUSH_GS |
| pushl %fs |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET fs, 0;*/ |
| pushl %es |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET es, 0;*/ |
| pushl %ds |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET ds, 0;*/ |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET eax, 0 |
| pushl %ebp |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET ebp, 0 |
| pushl %edi |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET edi, 0 |
| pushl %esi |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET esi, 0 |
| pushl %edx |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET edx, 0 |
| pushl %ecx |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET ecx, 0 |
| pushl %ebx |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET ebx, 0 |
| movl $(__USER_DS), %edx |
| movl %edx, %ds |
| movl %edx, %es |
| movl $(__KERNEL_PERCPU), %edx |
| movl %edx, %fs |
| SET_KERNEL_GS %edx |
| .endm |
| |
| .macro RESTORE_INT_REGS |
| popl %ebx |
| CFI_ADJUST_CFA_OFFSET -4 |
| CFI_RESTORE ebx |
| popl %ecx |
| CFI_ADJUST_CFA_OFFSET -4 |
| CFI_RESTORE ecx |
| popl %edx |
| CFI_ADJUST_CFA_OFFSET -4 |
| CFI_RESTORE edx |
| popl %esi |
| CFI_ADJUST_CFA_OFFSET -4 |
| CFI_RESTORE esi |
| popl %edi |
| CFI_ADJUST_CFA_OFFSET -4 |
| CFI_RESTORE edi |
| popl %ebp |
| CFI_ADJUST_CFA_OFFSET -4 |
| CFI_RESTORE ebp |
| popl %eax |
| CFI_ADJUST_CFA_OFFSET -4 |
| CFI_RESTORE eax |
| .endm |
| |
| .macro RESTORE_REGS pop=0 |
| RESTORE_INT_REGS |
| 1: popl %ds |
| CFI_ADJUST_CFA_OFFSET -4 |
| /*CFI_RESTORE ds;*/ |
| 2: popl %es |
| CFI_ADJUST_CFA_OFFSET -4 |
| /*CFI_RESTORE es;*/ |
| 3: popl %fs |
| CFI_ADJUST_CFA_OFFSET -4 |
| /*CFI_RESTORE fs;*/ |
| POP_GS \pop |
| .pushsection .fixup, "ax" |
| 4: movl $0, (%esp) |
| jmp 1b |
| 5: movl $0, (%esp) |
| jmp 2b |
| 6: movl $0, (%esp) |
| jmp 3b |
| .section __ex_table, "a" |
| .align 4 |
| .long 1b, 4b |
| .long 2b, 5b |
| .long 3b, 6b |
| .popsection |
| POP_GS_EX |
| .endm |
| |
| .macro RING0_INT_FRAME |
| CFI_STARTPROC simple |
| CFI_SIGNAL_FRAME |
| CFI_DEF_CFA esp, 3*4 |
| /*CFI_OFFSET cs, -2*4;*/ |
| CFI_OFFSET eip, -3*4 |
| .endm |
| |
| .macro RING0_EC_FRAME |
| CFI_STARTPROC simple |
| CFI_SIGNAL_FRAME |
| CFI_DEF_CFA esp, 4*4 |
| /*CFI_OFFSET cs, -2*4;*/ |
| CFI_OFFSET eip, -3*4 |
| .endm |
| |
| .macro RING0_PTREGS_FRAME |
| CFI_STARTPROC simple |
| CFI_SIGNAL_FRAME |
| CFI_DEF_CFA esp, PT_OLDESP-PT_EBX |
| /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/ |
| CFI_OFFSET eip, PT_EIP-PT_OLDESP |
| /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/ |
| /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/ |
| CFI_OFFSET eax, PT_EAX-PT_OLDESP |
| CFI_OFFSET ebp, PT_EBP-PT_OLDESP |
| CFI_OFFSET edi, PT_EDI-PT_OLDESP |
| CFI_OFFSET esi, PT_ESI-PT_OLDESP |
| CFI_OFFSET edx, PT_EDX-PT_OLDESP |
| CFI_OFFSET ecx, PT_ECX-PT_OLDESP |
| CFI_OFFSET ebx, PT_EBX-PT_OLDESP |
| .endm |
| |
| ENTRY(ret_from_fork) |
| CFI_STARTPROC |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| call schedule_tail |
| GET_THREAD_INFO(%ebp) |
| popl %eax |
| CFI_ADJUST_CFA_OFFSET -4 |
| pushl $0x0202 # Reset kernel eflags |
| CFI_ADJUST_CFA_OFFSET 4 |
| popfl |
| CFI_ADJUST_CFA_OFFSET -4 |
| jmp syscall_exit |
| CFI_ENDPROC |
| END(ret_from_fork) |
| |
| /* |
| * Return to user mode is not as complex as all this looks, |
| * but we want the default path for a system call return to |
| * go as quickly as possible which is why some of this is |
| * less clear than it otherwise should be. |
| */ |
| |
| # userspace resumption stub bypassing syscall exit tracing |
| ALIGN |
| RING0_PTREGS_FRAME |
| ret_from_exception: |
| preempt_stop(CLBR_ANY) |
| ret_from_intr: |
| GET_THREAD_INFO(%ebp) |
| check_userspace: |
| movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS |
| movb PT_CS(%esp), %al |
| andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax |
| cmpl $USER_RPL, %eax |
| jb resume_kernel # not returning to v8086 or userspace |
| |
| ENTRY(resume_userspace) |
| LOCKDEP_SYS_EXIT |
| DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt |
| # setting need_resched or sigpending |
| # between sampling and the iret |
| TRACE_IRQS_OFF |
| movl TI_flags(%ebp), %ecx |
| andl $_TIF_WORK_MASK, %ecx # is there any work to be done on |
| # int/exception return? |
| jne work_pending |
| jmp restore_all |
| END(ret_from_exception) |
| |
| #ifdef CONFIG_PREEMPT |
| ENTRY(resume_kernel) |
| DISABLE_INTERRUPTS(CLBR_ANY) |
| cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ? |
| jnz restore_all |
| need_resched: |
| movl TI_flags(%ebp), %ecx # need_resched set ? |
| testb $_TIF_NEED_RESCHED, %cl |
| jz restore_all |
| testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off (exception path) ? |
| jz restore_all |
| call preempt_schedule_irq |
| jmp need_resched |
| END(resume_kernel) |
| #endif |
| CFI_ENDPROC |
| |
| /* SYSENTER_RETURN points to after the "sysenter" instruction in |
| the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ |
| |
| # sysenter call handler stub |
| ENTRY(ia32_sysenter_target) |
| CFI_STARTPROC simple |
| CFI_SIGNAL_FRAME |
| CFI_DEF_CFA esp, 0 |
| CFI_REGISTER esp, ebp |
| movl TSS_sysenter_sp0(%esp),%esp |
| sysenter_past_esp: |
| /* |
| * Interrupts are disabled here, but we can't trace it until |
| * enough kernel state to call TRACE_IRQS_OFF can be called - but |
| * we immediately enable interrupts at that point anyway. |
| */ |
| pushl $(__USER_DS) |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET ss, 0*/ |
| pushl %ebp |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET esp, 0 |
| pushfl |
| orl $X86_EFLAGS_IF, (%esp) |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $(__USER_CS) |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET cs, 0*/ |
| /* |
| * Push current_thread_info()->sysenter_return to the stack. |
| * A tiny bit of offset fixup is necessary - 4*4 means the 4 words |
| * pushed above; +8 corresponds to copy_thread's esp0 setting. |
| */ |
| pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp) |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET eip, 0 |
| |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| ENABLE_INTERRUPTS(CLBR_NONE) |
| |
| /* |
| * Load the potential sixth argument from user stack. |
| * Careful about security. |
| */ |
| cmpl $__PAGE_OFFSET-3,%ebp |
| jae syscall_fault |
| 1: movl (%ebp),%ebp |
| movl %ebp,PT_EBP(%esp) |
| .section __ex_table,"a" |
| .align 4 |
| .long 1b,syscall_fault |
| .previous |
| |
| GET_THREAD_INFO(%ebp) |
| |
| testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) |
| jnz sysenter_audit |
| sysenter_do_call: |
| cmpl $(nr_syscalls), %eax |
| jae syscall_badsys |
| call *sys_call_table(,%eax,4) |
| movl %eax,PT_EAX(%esp) |
| LOCKDEP_SYS_EXIT |
| DISABLE_INTERRUPTS(CLBR_ANY) |
| TRACE_IRQS_OFF |
| movl TI_flags(%ebp), %ecx |
| testl $_TIF_ALLWORK_MASK, %ecx |
| jne sysexit_audit |
| sysenter_exit: |
| /* if something modifies registers it must also disable sysexit */ |
| movl PT_EIP(%esp), %edx |
| movl PT_OLDESP(%esp), %ecx |
| xorl %ebp,%ebp |
| TRACE_IRQS_ON |
| 1: mov PT_FS(%esp), %fs |
| PTGS_TO_GS |
| ENABLE_INTERRUPTS_SYSEXIT |
| |
| #ifdef CONFIG_AUDITSYSCALL |
| sysenter_audit: |
| testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) |
| jnz syscall_trace_entry |
| addl $4,%esp |
| CFI_ADJUST_CFA_OFFSET -4 |
| /* %esi already in 8(%esp) 6th arg: 4th syscall arg */ |
| /* %edx already in 4(%esp) 5th arg: 3rd syscall arg */ |
| /* %ecx already in 0(%esp) 4th arg: 2nd syscall arg */ |
| movl %ebx,%ecx /* 3rd arg: 1st syscall arg */ |
| movl %eax,%edx /* 2nd arg: syscall number */ |
| movl $AUDIT_ARCH_I386,%eax /* 1st arg: audit arch */ |
| call audit_syscall_entry |
| pushl %ebx |
| CFI_ADJUST_CFA_OFFSET 4 |
| movl PT_EAX(%esp),%eax /* reload syscall number */ |
| jmp sysenter_do_call |
| |
| sysexit_audit: |
| testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx |
| jne syscall_exit_work |
| TRACE_IRQS_ON |
| ENABLE_INTERRUPTS(CLBR_ANY) |
| movl %eax,%edx /* second arg, syscall return value */ |
| cmpl $0,%eax /* is it < 0? */ |
| setl %al /* 1 if so, 0 if not */ |
| movzbl %al,%eax /* zero-extend that */ |
| inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ |
| call audit_syscall_exit |
| DISABLE_INTERRUPTS(CLBR_ANY) |
| TRACE_IRQS_OFF |
| movl TI_flags(%ebp), %ecx |
| testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx |
| jne syscall_exit_work |
| movl PT_EAX(%esp),%eax /* reload syscall return value */ |
| jmp sysenter_exit |
| #endif |
| |
| CFI_ENDPROC |
| .pushsection .fixup,"ax" |
| 2: movl $0,PT_FS(%esp) |
| jmp 1b |
| .section __ex_table,"a" |
| .align 4 |
| .long 1b,2b |
| .popsection |
| PTGS_TO_GS_EX |
| ENDPROC(ia32_sysenter_target) |
| |
| # system call handler stub |
| ENTRY(system_call) |
| RING0_INT_FRAME # can't unwind into user space anyway |
| pushl %eax # save orig_eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| GET_THREAD_INFO(%ebp) |
| # system call tracing in operation / emulation |
| testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) |
| jnz syscall_trace_entry |
| cmpl $(nr_syscalls), %eax |
| jae syscall_badsys |
| syscall_call: |
| call *sys_call_table(,%eax,4) |
| movl %eax,PT_EAX(%esp) # store the return value |
| syscall_exit: |
| LOCKDEP_SYS_EXIT |
| DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt |
| # setting need_resched or sigpending |
| # between sampling and the iret |
| TRACE_IRQS_OFF |
| movl TI_flags(%ebp), %ecx |
| testl $_TIF_ALLWORK_MASK, %ecx # current->work |
| jne syscall_exit_work |
| |
| restore_all: |
| TRACE_IRQS_IRET |
| restore_all_notrace: |
| movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS |
| # Warning: PT_OLDSS(%esp) contains the wrong/random values if we |
| # are returning to the kernel. |
| # See comments in process.c:copy_thread() for details. |
| movb PT_OLDSS(%esp), %ah |
| movb PT_CS(%esp), %al |
| andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax |
| cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax |
| CFI_REMEMBER_STATE |
| je ldt_ss # returning to user-space with LDT SS |
| restore_nocheck: |
| RESTORE_REGS 4 # skip orig_eax/error_code |
| CFI_ADJUST_CFA_OFFSET -4 |
| irq_return: |
| INTERRUPT_RETURN |
| .section .fixup,"ax" |
| ENTRY(iret_exc) |
| pushl $0 # no error code |
| pushl $do_iret_error |
| jmp error_code |
| .previous |
| .section __ex_table,"a" |
| .align 4 |
| .long irq_return,iret_exc |
| .previous |
| |
| CFI_RESTORE_STATE |
| ldt_ss: |
| larl PT_OLDSS(%esp), %eax |
| jnz restore_nocheck |
| testl $0x00400000, %eax # returning to 32bit stack? |
| jnz restore_nocheck # allright, normal return |
| |
| #ifdef CONFIG_PARAVIRT |
| /* |
| * The kernel can't run on a non-flat stack if paravirt mode |
| * is active. Rather than try to fixup the high bits of |
| * ESP, bypass this code entirely. This may break DOSemu |
| * and/or Wine support in a paravirt VM, although the option |
| * is still available to implement the setting of the high |
| * 16-bits in the INTERRUPT_RETURN paravirt-op. |
| */ |
| cmpl $0, pv_info+PARAVIRT_enabled |
| jne restore_nocheck |
| #endif |
| |
| /* |
| * Setup and switch to ESPFIX stack |
| * |
| * We're returning to userspace with a 16 bit stack. The CPU will not |
| * restore the high word of ESP for us on executing iret... This is an |
| * "official" bug of all the x86-compatible CPUs, which we can work |
| * around to make dosemu and wine happy. We do this by preloading the |
| * high word of ESP with the high word of the userspace ESP while |
| * compensating for the offset by changing to the ESPFIX segment with |
| * a base address that matches for the difference. |
| */ |
| mov %esp, %edx /* load kernel esp */ |
| mov PT_OLDESP(%esp), %eax /* load userspace esp */ |
| mov %dx, %ax /* eax: new kernel esp */ |
| sub %eax, %edx /* offset (low word is 0) */ |
| PER_CPU(gdt_page, %ebx) |
| shr $16, %edx |
| mov %dl, GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx) /* bits 16..23 */ |
| mov %dh, GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx) /* bits 24..31 */ |
| pushl $__ESPFIX_SS |
| CFI_ADJUST_CFA_OFFSET 4 |
| push %eax /* new kernel esp */ |
| CFI_ADJUST_CFA_OFFSET 4 |
| /* Disable interrupts, but do not irqtrace this section: we |
| * will soon execute iret and the tracer was already set to |
| * the irqstate after the iret */ |
| DISABLE_INTERRUPTS(CLBR_EAX) |
| lss (%esp), %esp /* switch to espfix segment */ |
| CFI_ADJUST_CFA_OFFSET -8 |
| jmp restore_nocheck |
| CFI_ENDPROC |
| ENDPROC(system_call) |
| |
| # perform work that needs to be done immediately before resumption |
| ALIGN |
| RING0_PTREGS_FRAME # can't unwind into user space anyway |
| work_pending: |
| testb $_TIF_NEED_RESCHED, %cl |
| jz work_notifysig |
| work_resched: |
| call schedule |
| LOCKDEP_SYS_EXIT |
| DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt |
| # setting need_resched or sigpending |
| # between sampling and the iret |
| TRACE_IRQS_OFF |
| movl TI_flags(%ebp), %ecx |
| andl $_TIF_WORK_MASK, %ecx # is there any work to be done other |
| # than syscall tracing? |
| jz restore_all |
| testb $_TIF_NEED_RESCHED, %cl |
| jnz work_resched |
| |
| work_notifysig: # deal with pending signals and |
| # notify-resume requests |
| #ifdef CONFIG_VM86 |
| testl $X86_EFLAGS_VM, PT_EFLAGS(%esp) |
| movl %esp, %eax |
| jne work_notifysig_v86 # returning to kernel-space or |
| # vm86-space |
| xorl %edx, %edx |
| call do_notify_resume |
| jmp resume_userspace_sig |
| |
| ALIGN |
| work_notifysig_v86: |
| pushl %ecx # save ti_flags for do_notify_resume |
| CFI_ADJUST_CFA_OFFSET 4 |
| call save_v86_state # %eax contains pt_regs pointer |
| popl %ecx |
| CFI_ADJUST_CFA_OFFSET -4 |
| movl %eax, %esp |
| #else |
| movl %esp, %eax |
| #endif |
| xorl %edx, %edx |
| call do_notify_resume |
| jmp resume_userspace_sig |
| END(work_pending) |
| |
| # perform syscall exit tracing |
| ALIGN |
| syscall_trace_entry: |
| movl $-ENOSYS,PT_EAX(%esp) |
| movl %esp, %eax |
| call syscall_trace_enter |
| /* What it returned is what we'll actually use. */ |
| cmpl $(nr_syscalls), %eax |
| jnae syscall_call |
| jmp syscall_exit |
| END(syscall_trace_entry) |
| |
| # perform syscall exit tracing |
| ALIGN |
| syscall_exit_work: |
| testl $_TIF_WORK_SYSCALL_EXIT, %ecx |
| jz work_pending |
| TRACE_IRQS_ON |
| ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call |
| # schedule() instead |
| movl %esp, %eax |
| call syscall_trace_leave |
| jmp resume_userspace |
| END(syscall_exit_work) |
| CFI_ENDPROC |
| |
| RING0_INT_FRAME # can't unwind into user space anyway |
| syscall_fault: |
| GET_THREAD_INFO(%ebp) |
| movl $-EFAULT,PT_EAX(%esp) |
| jmp resume_userspace |
| END(syscall_fault) |
| |
| syscall_badsys: |
| movl $-ENOSYS,PT_EAX(%esp) |
| jmp resume_userspace |
| END(syscall_badsys) |
| CFI_ENDPROC |
| |
| /* |
| * System calls that need a pt_regs pointer. |
| */ |
| #define PTREGSCALL(name) \ |
| ALIGN; \ |
| ptregs_##name: \ |
| leal 4(%esp),%eax; \ |
| jmp sys_##name; |
| |
| PTREGSCALL(iopl) |
| PTREGSCALL(fork) |
| PTREGSCALL(clone) |
| PTREGSCALL(vfork) |
| PTREGSCALL(execve) |
| PTREGSCALL(sigaltstack) |
| PTREGSCALL(sigreturn) |
| PTREGSCALL(rt_sigreturn) |
| PTREGSCALL(vm86) |
| PTREGSCALL(vm86old) |
| |
| .macro FIXUP_ESPFIX_STACK |
| /* |
| * Switch back for ESPFIX stack to the normal zerobased stack |
| * |
| * We can't call C functions using the ESPFIX stack. This code reads |
| * the high word of the segment base from the GDT and swiches to the |
| * normal stack and adjusts ESP with the matching offset. |
| */ |
| /* fixup the stack */ |
| PER_CPU(gdt_page, %ebx) |
| mov GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx), %al /* bits 16..23 */ |
| mov GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx), %ah /* bits 24..31 */ |
| shl $16, %eax |
| addl %esp, %eax /* the adjusted stack pointer */ |
| pushl $__KERNEL_DS |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| lss (%esp), %esp /* switch to the normal stack segment */ |
| CFI_ADJUST_CFA_OFFSET -8 |
| .endm |
| .macro UNWIND_ESPFIX_STACK |
| movl %ss, %eax |
| /* see if on espfix stack */ |
| cmpw $__ESPFIX_SS, %ax |
| jne 27f |
| movl $__KERNEL_DS, %eax |
| movl %eax, %ds |
| movl %eax, %es |
| /* switch to normal stack */ |
| FIXUP_ESPFIX_STACK |
| 27: |
| .endm |
| |
| /* |
| * Build the entry stubs and pointer table with some assembler magic. |
| * We pack 7 stubs into a single 32-byte chunk, which will fit in a |
| * single cache line on all modern x86 implementations. |
| */ |
| .section .init.rodata,"a" |
| ENTRY(interrupt) |
| .text |
| .p2align 5 |
| .p2align CONFIG_X86_L1_CACHE_SHIFT |
| ENTRY(irq_entries_start) |
| RING0_INT_FRAME |
| vector=FIRST_EXTERNAL_VECTOR |
| .rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7 |
| .balign 32 |
| .rept 7 |
| .if vector < NR_VECTORS |
| .if vector <> FIRST_EXTERNAL_VECTOR |
| CFI_ADJUST_CFA_OFFSET -4 |
| .endif |
| 1: pushl $(~vector+0x80) /* Note: always in signed byte range */ |
| CFI_ADJUST_CFA_OFFSET 4 |
| .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6 |
| jmp 2f |
| .endif |
| .previous |
| .long 1b |
| .text |
| vector=vector+1 |
| .endif |
| .endr |
| 2: jmp common_interrupt |
| .endr |
| END(irq_entries_start) |
| |
| .previous |
| END(interrupt) |
| .previous |
| |
| /* |
| * the CPU automatically disables interrupts when executing an IRQ vector, |
| * so IRQ-flags tracing has to follow that: |
| */ |
| .p2align CONFIG_X86_L1_CACHE_SHIFT |
| common_interrupt: |
| addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */ |
| SAVE_ALL |
| TRACE_IRQS_OFF |
| movl %esp,%eax |
| call do_IRQ |
| jmp ret_from_intr |
| ENDPROC(common_interrupt) |
| CFI_ENDPROC |
| |
| #define BUILD_INTERRUPT3(name, nr, fn) \ |
| ENTRY(name) \ |
| RING0_INT_FRAME; \ |
| pushl $~(nr); \ |
| CFI_ADJUST_CFA_OFFSET 4; \ |
| SAVE_ALL; \ |
| TRACE_IRQS_OFF \ |
| movl %esp,%eax; \ |
| call fn; \ |
| jmp ret_from_intr; \ |
| CFI_ENDPROC; \ |
| ENDPROC(name) |
| |
| #define BUILD_INTERRUPT(name, nr) BUILD_INTERRUPT3(name, nr, smp_##name) |
| |
| /* The include is where all of the SMP etc. interrupts come from */ |
| #include <asm/entry_arch.h> |
| |
| ENTRY(coprocessor_error) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_coprocessor_error |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(coprocessor_error) |
| |
| ENTRY(simd_coprocessor_error) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_simd_coprocessor_error |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(simd_coprocessor_error) |
| |
| ENTRY(device_not_available) |
| RING0_INT_FRAME |
| pushl $-1 # mark this as an int |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_device_not_available |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(device_not_available) |
| |
| #ifdef CONFIG_PARAVIRT |
| ENTRY(native_iret) |
| iret |
| .section __ex_table,"a" |
| .align 4 |
| .long native_iret, iret_exc |
| .previous |
| END(native_iret) |
| |
| ENTRY(native_irq_enable_sysexit) |
| sti |
| sysexit |
| END(native_irq_enable_sysexit) |
| #endif |
| |
| ENTRY(overflow) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_overflow |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(overflow) |
| |
| ENTRY(bounds) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_bounds |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(bounds) |
| |
| ENTRY(invalid_op) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_invalid_op |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(invalid_op) |
| |
| ENTRY(coprocessor_segment_overrun) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_coprocessor_segment_overrun |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(coprocessor_segment_overrun) |
| |
| ENTRY(invalid_TSS) |
| RING0_EC_FRAME |
| pushl $do_invalid_TSS |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(invalid_TSS) |
| |
| ENTRY(segment_not_present) |
| RING0_EC_FRAME |
| pushl $do_segment_not_present |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(segment_not_present) |
| |
| ENTRY(stack_segment) |
| RING0_EC_FRAME |
| pushl $do_stack_segment |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(stack_segment) |
| |
| ENTRY(alignment_check) |
| RING0_EC_FRAME |
| pushl $do_alignment_check |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(alignment_check) |
| |
| ENTRY(divide_error) |
| RING0_INT_FRAME |
| pushl $0 # no error code |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_divide_error |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(divide_error) |
| |
| #ifdef CONFIG_X86_MCE |
| ENTRY(machine_check) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl machine_check_vector |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(machine_check) |
| #endif |
| |
| ENTRY(spurious_interrupt_bug) |
| RING0_INT_FRAME |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $do_spurious_interrupt_bug |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(spurious_interrupt_bug) |
| |
| ENTRY(kernel_thread_helper) |
| pushl $0 # fake return address for unwinder |
| CFI_STARTPROC |
| movl %edx,%eax |
| push %edx |
| CFI_ADJUST_CFA_OFFSET 4 |
| call *%ebx |
| push %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| call do_exit |
| ud2 # padding for call trace |
| CFI_ENDPROC |
| ENDPROC(kernel_thread_helper) |
| |
| #ifdef CONFIG_XEN |
| /* Xen doesn't set %esp to be precisely what the normal sysenter |
| entrypoint expects, so fix it up before using the normal path. */ |
| ENTRY(xen_sysenter_target) |
| RING0_INT_FRAME |
| addl $5*4, %esp /* remove xen-provided frame */ |
| CFI_ADJUST_CFA_OFFSET -5*4 |
| jmp sysenter_past_esp |
| CFI_ENDPROC |
| |
| ENTRY(xen_hypervisor_callback) |
| CFI_STARTPROC |
| pushl $0 |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| TRACE_IRQS_OFF |
| |
| /* Check to see if we got the event in the critical |
| region in xen_iret_direct, after we've reenabled |
| events and checked for pending events. This simulates |
| iret instruction's behaviour where it delivers a |
| pending interrupt when enabling interrupts. */ |
| movl PT_EIP(%esp),%eax |
| cmpl $xen_iret_start_crit,%eax |
| jb 1f |
| cmpl $xen_iret_end_crit,%eax |
| jae 1f |
| |
| jmp xen_iret_crit_fixup |
| |
| ENTRY(xen_do_upcall) |
| 1: mov %esp, %eax |
| call xen_evtchn_do_upcall |
| jmp ret_from_intr |
| CFI_ENDPROC |
| ENDPROC(xen_hypervisor_callback) |
| |
| # Hypervisor uses this for application faults while it executes. |
| # We get here for two reasons: |
| # 1. Fault while reloading DS, ES, FS or GS |
| # 2. Fault while executing IRET |
| # Category 1 we fix up by reattempting the load, and zeroing the segment |
| # register if the load fails. |
| # Category 2 we fix up by jumping to do_iret_error. We cannot use the |
| # normal Linux return path in this case because if we use the IRET hypercall |
| # to pop the stack frame we end up in an infinite loop of failsafe callbacks. |
| # We distinguish between categories by maintaining a status value in EAX. |
| ENTRY(xen_failsafe_callback) |
| CFI_STARTPROC |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| movl $1,%eax |
| 1: mov 4(%esp),%ds |
| 2: mov 8(%esp),%es |
| 3: mov 12(%esp),%fs |
| 4: mov 16(%esp),%gs |
| testl %eax,%eax |
| popl %eax |
| CFI_ADJUST_CFA_OFFSET -4 |
| lea 16(%esp),%esp |
| CFI_ADJUST_CFA_OFFSET -16 |
| jz 5f |
| addl $16,%esp |
| jmp iret_exc # EAX != 0 => Category 2 (Bad IRET) |
| 5: pushl $0 # EAX == 0 => Category 1 (Bad segment) |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| jmp ret_from_exception |
| CFI_ENDPROC |
| |
| .section .fixup,"ax" |
| 6: xorl %eax,%eax |
| movl %eax,4(%esp) |
| jmp 1b |
| 7: xorl %eax,%eax |
| movl %eax,8(%esp) |
| jmp 2b |
| 8: xorl %eax,%eax |
| movl %eax,12(%esp) |
| jmp 3b |
| 9: xorl %eax,%eax |
| movl %eax,16(%esp) |
| jmp 4b |
| .previous |
| .section __ex_table,"a" |
| .align 4 |
| .long 1b,6b |
| .long 2b,7b |
| .long 3b,8b |
| .long 4b,9b |
| .previous |
| ENDPROC(xen_failsafe_callback) |
| |
| #endif /* CONFIG_XEN */ |
| |
| #ifdef CONFIG_FUNCTION_TRACER |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| |
| ENTRY(mcount) |
| ret |
| END(mcount) |
| |
| ENTRY(ftrace_caller) |
| cmpl $0, function_trace_stop |
| jne ftrace_stub |
| |
| pushl %eax |
| pushl %ecx |
| pushl %edx |
| movl 0xc(%esp), %eax |
| movl 0x4(%ebp), %edx |
| subl $MCOUNT_INSN_SIZE, %eax |
| |
| .globl ftrace_call |
| ftrace_call: |
| call ftrace_stub |
| |
| popl %edx |
| popl %ecx |
| popl %eax |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| .globl ftrace_graph_call |
| ftrace_graph_call: |
| jmp ftrace_stub |
| #endif |
| |
| .globl ftrace_stub |
| ftrace_stub: |
| ret |
| END(ftrace_caller) |
| |
| #else /* ! CONFIG_DYNAMIC_FTRACE */ |
| |
| ENTRY(mcount) |
| cmpl $0, function_trace_stop |
| jne ftrace_stub |
| |
| cmpl $ftrace_stub, ftrace_trace_function |
| jnz trace |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| cmpl $ftrace_stub, ftrace_graph_return |
| jnz ftrace_graph_caller |
| |
| cmpl $ftrace_graph_entry_stub, ftrace_graph_entry |
| jnz ftrace_graph_caller |
| #endif |
| .globl ftrace_stub |
| ftrace_stub: |
| ret |
| |
| /* taken from glibc */ |
| trace: |
| pushl %eax |
| pushl %ecx |
| pushl %edx |
| movl 0xc(%esp), %eax |
| movl 0x4(%ebp), %edx |
| subl $MCOUNT_INSN_SIZE, %eax |
| |
| call *ftrace_trace_function |
| |
| popl %edx |
| popl %ecx |
| popl %eax |
| jmp ftrace_stub |
| END(mcount) |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| #endif /* CONFIG_FUNCTION_TRACER */ |
| |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| ENTRY(ftrace_graph_caller) |
| cmpl $0, function_trace_stop |
| jne ftrace_stub |
| |
| pushl %eax |
| pushl %ecx |
| pushl %edx |
| movl 0xc(%esp), %edx |
| lea 0x4(%ebp), %eax |
| movl (%ebp), %ecx |
| subl $MCOUNT_INSN_SIZE, %edx |
| call prepare_ftrace_return |
| popl %edx |
| popl %ecx |
| popl %eax |
| ret |
| END(ftrace_graph_caller) |
| |
| .globl return_to_handler |
| return_to_handler: |
| pushl %eax |
| pushl %edx |
| movl %ebp, %eax |
| call ftrace_return_to_handler |
| movl %eax, %ecx |
| popl %edx |
| popl %eax |
| jmp *%ecx |
| #endif |
| |
| .section .rodata,"a" |
| #include "syscall_table_32.S" |
| |
| syscall_table_size=(.-sys_call_table) |
| |
| /* |
| * Some functions should be protected against kprobes |
| */ |
| .pushsection .kprobes.text, "ax" |
| |
| ENTRY(page_fault) |
| RING0_EC_FRAME |
| pushl $do_page_fault |
| CFI_ADJUST_CFA_OFFSET 4 |
| ALIGN |
| error_code: |
| /* the function address is in %gs's slot on the stack */ |
| pushl %fs |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET fs, 0*/ |
| pushl %es |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET es, 0*/ |
| pushl %ds |
| CFI_ADJUST_CFA_OFFSET 4 |
| /*CFI_REL_OFFSET ds, 0*/ |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET eax, 0 |
| pushl %ebp |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET ebp, 0 |
| pushl %edi |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET edi, 0 |
| pushl %esi |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET esi, 0 |
| pushl %edx |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET edx, 0 |
| pushl %ecx |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET ecx, 0 |
| pushl %ebx |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET ebx, 0 |
| cld |
| movl $(__KERNEL_PERCPU), %ecx |
| movl %ecx, %fs |
| UNWIND_ESPFIX_STACK |
| GS_TO_REG %ecx |
| movl PT_GS(%esp), %edi # get the function address |
| movl PT_ORIG_EAX(%esp), %edx # get the error code |
| movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart |
| REG_TO_PTGS %ecx |
| SET_KERNEL_GS %ecx |
| movl $(__USER_DS), %ecx |
| movl %ecx, %ds |
| movl %ecx, %es |
| TRACE_IRQS_OFF |
| movl %esp,%eax # pt_regs pointer |
| call *%edi |
| jmp ret_from_exception |
| CFI_ENDPROC |
| END(page_fault) |
| |
| /* |
| * Debug traps and NMI can happen at the one SYSENTER instruction |
| * that sets up the real kernel stack. Check here, since we can't |
| * allow the wrong stack to be used. |
| * |
| * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have |
| * already pushed 3 words if it hits on the sysenter instruction: |
| * eflags, cs and eip. |
| * |
| * We just load the right stack, and push the three (known) values |
| * by hand onto the new stack - while updating the return eip past |
| * the instruction that would have done it for sysenter. |
| */ |
| .macro FIX_STACK offset ok label |
| cmpw $__KERNEL_CS, 4(%esp) |
| jne \ok |
| \label: |
| movl TSS_sysenter_sp0 + \offset(%esp), %esp |
| CFI_DEF_CFA esp, 0 |
| CFI_UNDEFINED eip |
| pushfl |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $__KERNEL_CS |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl $sysenter_past_esp |
| CFI_ADJUST_CFA_OFFSET 4 |
| CFI_REL_OFFSET eip, 0 |
| .endm |
| |
| ENTRY(debug) |
| RING0_INT_FRAME |
| cmpl $ia32_sysenter_target,(%esp) |
| jne debug_stack_correct |
| FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn |
| debug_stack_correct: |
| pushl $-1 # mark this as an int |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| TRACE_IRQS_OFF |
| xorl %edx,%edx # error code 0 |
| movl %esp,%eax # pt_regs pointer |
| call do_debug |
| jmp ret_from_exception |
| CFI_ENDPROC |
| END(debug) |
| |
| /* |
| * NMI is doubly nasty. It can happen _while_ we're handling |
| * a debug fault, and the debug fault hasn't yet been able to |
| * clear up the stack. So we first check whether we got an |
| * NMI on the sysenter entry path, but after that we need to |
| * check whether we got an NMI on the debug path where the debug |
| * fault happened on the sysenter path. |
| */ |
| ENTRY(nmi) |
| RING0_INT_FRAME |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| movl %ss, %eax |
| cmpw $__ESPFIX_SS, %ax |
| popl %eax |
| CFI_ADJUST_CFA_OFFSET -4 |
| je nmi_espfix_stack |
| cmpl $ia32_sysenter_target,(%esp) |
| je nmi_stack_fixup |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| movl %esp,%eax |
| /* Do not access memory above the end of our stack page, |
| * it might not exist. |
| */ |
| andl $(THREAD_SIZE-1),%eax |
| cmpl $(THREAD_SIZE-20),%eax |
| popl %eax |
| CFI_ADJUST_CFA_OFFSET -4 |
| jae nmi_stack_correct |
| cmpl $ia32_sysenter_target,12(%esp) |
| je nmi_debug_stack_check |
| nmi_stack_correct: |
| /* We have a RING0_INT_FRAME here */ |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| xorl %edx,%edx # zero error code |
| movl %esp,%eax # pt_regs pointer |
| call do_nmi |
| jmp restore_all_notrace |
| CFI_ENDPROC |
| |
| nmi_stack_fixup: |
| RING0_INT_FRAME |
| FIX_STACK 12, nmi_stack_correct, 1 |
| jmp nmi_stack_correct |
| |
| nmi_debug_stack_check: |
| /* We have a RING0_INT_FRAME here */ |
| cmpw $__KERNEL_CS,16(%esp) |
| jne nmi_stack_correct |
| cmpl $debug,(%esp) |
| jb nmi_stack_correct |
| cmpl $debug_esp_fix_insn,(%esp) |
| ja nmi_stack_correct |
| FIX_STACK 24, nmi_stack_correct, 1 |
| jmp nmi_stack_correct |
| |
| nmi_espfix_stack: |
| /* We have a RING0_INT_FRAME here. |
| * |
| * create the pointer to lss back |
| */ |
| pushl %ss |
| CFI_ADJUST_CFA_OFFSET 4 |
| pushl %esp |
| CFI_ADJUST_CFA_OFFSET 4 |
| addl $4, (%esp) |
| /* copy the iret frame of 12 bytes */ |
| .rept 3 |
| pushl 16(%esp) |
| CFI_ADJUST_CFA_OFFSET 4 |
| .endr |
| pushl %eax |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| FIXUP_ESPFIX_STACK # %eax == %esp |
| xorl %edx,%edx # zero error code |
| call do_nmi |
| RESTORE_REGS |
| lss 12+4(%esp), %esp # back to espfix stack |
| CFI_ADJUST_CFA_OFFSET -24 |
| jmp irq_return |
| CFI_ENDPROC |
| END(nmi) |
| |
| ENTRY(int3) |
| RING0_INT_FRAME |
| pushl $-1 # mark this as an int |
| CFI_ADJUST_CFA_OFFSET 4 |
| SAVE_ALL |
| TRACE_IRQS_OFF |
| xorl %edx,%edx # zero error code |
| movl %esp,%eax # pt_regs pointer |
| call do_int3 |
| jmp ret_from_exception |
| CFI_ENDPROC |
| END(int3) |
| |
| ENTRY(general_protection) |
| RING0_EC_FRAME |
| pushl $do_general_protection |
| CFI_ADJUST_CFA_OFFSET 4 |
| jmp error_code |
| CFI_ENDPROC |
| END(general_protection) |
| |
| /* |
| * End of kprobes section |
| */ |
| .popsection |