| /* |
| * Generate definitions needed by assembly language modules. |
| * This code generates raw asm output which is post-processed |
| * to extract and format the required data. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/signal.h> |
| #include <linux/personality.h> |
| #include <linux/kbuild.h> |
| #include <asm/ucontext.h> |
| #include <asm/processor.h> |
| #include <asm/thread_info.h> |
| #include <asm/ptrace.h> |
| #include "sigframe.h" |
| #include "mn10300-serial.h" |
| |
| void foo(void) |
| { |
| OFFSET(SIGCONTEXT_d0, sigcontext, d0); |
| OFFSET(SIGCONTEXT_d1, sigcontext, d1); |
| BLANK(); |
| |
| OFFSET(TI_task, thread_info, task); |
| OFFSET(TI_exec_domain, thread_info, exec_domain); |
| OFFSET(TI_flags, thread_info, flags); |
| OFFSET(TI_cpu, thread_info, cpu); |
| OFFSET(TI_preempt_count, thread_info, preempt_count); |
| OFFSET(TI_addr_limit, thread_info, addr_limit); |
| OFFSET(TI_restart_block, thread_info, restart_block); |
| BLANK(); |
| |
| OFFSET(REG_D0, pt_regs, d0); |
| OFFSET(REG_D1, pt_regs, d1); |
| OFFSET(REG_D2, pt_regs, d2); |
| OFFSET(REG_D3, pt_regs, d3); |
| OFFSET(REG_A0, pt_regs, a0); |
| OFFSET(REG_A1, pt_regs, a1); |
| OFFSET(REG_A2, pt_regs, a2); |
| OFFSET(REG_A3, pt_regs, a3); |
| OFFSET(REG_E0, pt_regs, e0); |
| OFFSET(REG_E1, pt_regs, e1); |
| OFFSET(REG_E2, pt_regs, e2); |
| OFFSET(REG_E3, pt_regs, e3); |
| OFFSET(REG_E4, pt_regs, e4); |
| OFFSET(REG_E5, pt_regs, e5); |
| OFFSET(REG_E6, pt_regs, e6); |
| OFFSET(REG_E7, pt_regs, e7); |
| OFFSET(REG_SP, pt_regs, sp); |
| OFFSET(REG_EPSW, pt_regs, epsw); |
| OFFSET(REG_PC, pt_regs, pc); |
| OFFSET(REG_LAR, pt_regs, lar); |
| OFFSET(REG_LIR, pt_regs, lir); |
| OFFSET(REG_MDR, pt_regs, mdr); |
| OFFSET(REG_MCVF, pt_regs, mcvf); |
| OFFSET(REG_MCRL, pt_regs, mcrl); |
| OFFSET(REG_MCRH, pt_regs, mcrh); |
| OFFSET(REG_MDRQ, pt_regs, mdrq); |
| OFFSET(REG_ORIG_D0, pt_regs, orig_d0); |
| OFFSET(REG_NEXT, pt_regs, next); |
| DEFINE(REG__END, sizeof(struct pt_regs)); |
| BLANK(); |
| |
| OFFSET(THREAD_UREGS, thread_struct, uregs); |
| OFFSET(THREAD_PC, thread_struct, pc); |
| OFFSET(THREAD_SP, thread_struct, sp); |
| OFFSET(THREAD_A3, thread_struct, a3); |
| OFFSET(THREAD_USP, thread_struct, usp); |
| OFFSET(THREAD_FRAME, thread_struct, frame); |
| #ifdef CONFIG_FPU |
| OFFSET(THREAD_FPU_FLAGS, thread_struct, fpu_flags); |
| OFFSET(THREAD_FPU_STATE, thread_struct, fpu_state); |
| DEFINE(__THREAD_USING_FPU, THREAD_USING_FPU); |
| DEFINE(__THREAD_HAS_FPU, THREAD_HAS_FPU); |
| #endif /* CONFIG_FPU */ |
| BLANK(); |
| |
| OFFSET(TASK_THREAD, task_struct, thread); |
| BLANK(); |
| |
| DEFINE(CLONE_VM_asm, CLONE_VM); |
| DEFINE(CLONE_FS_asm, CLONE_FS); |
| DEFINE(CLONE_FILES_asm, CLONE_FILES); |
| DEFINE(CLONE_SIGHAND_asm, CLONE_SIGHAND); |
| DEFINE(CLONE_UNTRACED_asm, CLONE_UNTRACED); |
| DEFINE(SIGCHLD_asm, SIGCHLD); |
| BLANK(); |
| |
| OFFSET(EXEC_DOMAIN_handler, exec_domain, handler); |
| OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext); |
| |
| DEFINE(PAGE_SIZE_asm, PAGE_SIZE); |
| |
| OFFSET(__rx_buffer, mn10300_serial_port, rx_buffer); |
| OFFSET(__rx_inp, mn10300_serial_port, rx_inp); |
| OFFSET(__rx_outp, mn10300_serial_port, rx_outp); |
| OFFSET(__uart_state, mn10300_serial_port, uart.state); |
| OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar); |
| OFFSET(__tx_break, mn10300_serial_port, tx_break); |
| OFFSET(__intr_flags, mn10300_serial_port, intr_flags); |
| OFFSET(__rx_icr, mn10300_serial_port, rx_icr); |
| OFFSET(__tx_icr, mn10300_serial_port, tx_icr); |
| OFFSET(__tm_icr, mn10300_serial_port, _tmicr); |
| OFFSET(__iobase, mn10300_serial_port, _iobase); |
| |
| DEFINE(__UART_XMIT_SIZE, UART_XMIT_SIZE); |
| OFFSET(__xmit_buffer, uart_state, xmit.buf); |
| OFFSET(__xmit_head, uart_state, xmit.head); |
| OFFSET(__xmit_tail, uart_state, xmit.tail); |
| } |