| #ifndef __RFKILL_H |
| #define __RFKILL_H |
| |
| /* |
| * Copyright (C) 2006 - 2007 Ivo van Doorn |
| * Copyright (C) 2007 Dmitry Torokhov |
| * Copyright 2009 Johannes Berg <johannes@sipsolutions.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the |
| * Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/types.h> |
| |
| /* define userspace visible states */ |
| #define RFKILL_STATE_SOFT_BLOCKED 0 |
| #define RFKILL_STATE_UNBLOCKED 1 |
| #define RFKILL_STATE_HARD_BLOCKED 2 |
| |
| /** |
| * enum rfkill_type - type of rfkill switch. |
| * |
| * @RFKILL_TYPE_ALL: toggles all switches (userspace only) |
| * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. |
| * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. |
| * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. |
| * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. |
| * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. |
| * @NUM_RFKILL_TYPES: number of defined rfkill types |
| */ |
| enum rfkill_type { |
| RFKILL_TYPE_ALL = 0, |
| RFKILL_TYPE_WLAN, |
| RFKILL_TYPE_BLUETOOTH, |
| RFKILL_TYPE_UWB, |
| RFKILL_TYPE_WIMAX, |
| RFKILL_TYPE_WWAN, |
| NUM_RFKILL_TYPES, |
| }; |
| |
| /** |
| * enum rfkill_operation - operation types |
| * @RFKILL_OP_ADD: a device was added |
| * @RFKILL_OP_DEL: a device was removed |
| * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device |
| * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) |
| */ |
| enum rfkill_operation { |
| RFKILL_OP_ADD = 0, |
| RFKILL_OP_DEL, |
| RFKILL_OP_CHANGE, |
| RFKILL_OP_CHANGE_ALL, |
| }; |
| |
| /** |
| * struct rfkill_event - events for userspace on /dev/rfkill |
| * @idx: index of dev rfkill |
| * @type: type of the rfkill struct |
| * @op: operation code |
| * @hard: hard state (0/1) |
| * @soft: soft state (0/1) |
| * |
| * Structure used for userspace communication on /dev/rfkill, |
| * used for events from the kernel and control to the kernel. |
| */ |
| struct rfkill_event { |
| __u32 idx; |
| __u8 type; |
| __u8 op; |
| __u8 soft, hard; |
| } __packed; |
| |
| /* ioctl for turning off rfkill-input (if present) */ |
| #define RFKILL_IOC_MAGIC 'R' |
| #define RFKILL_IOC_NOINPUT 1 |
| #define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) |
| |
| /* and that's all userspace gets */ |
| #ifdef __KERNEL__ |
| /* don't allow anyone to use these in the kernel */ |
| enum rfkill_user_states { |
| RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, |
| RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, |
| RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, |
| }; |
| #undef RFKILL_STATE_SOFT_BLOCKED |
| #undef RFKILL_STATE_UNBLOCKED |
| #undef RFKILL_STATE_HARD_BLOCKED |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/mutex.h> |
| #include <linux/device.h> |
| #include <linux/leds.h> |
| #include <linux/err.h> |
| |
| /* this is opaque */ |
| struct rfkill; |
| |
| /** |
| * struct rfkill_ops - rfkill driver methods |
| * |
| * @poll: poll the rfkill block state(s) -- only assign this method |
| * when you need polling. When called, simply call one of the |
| * rfkill_set{,_hw,_sw}_state family of functions. If the hw |
| * is getting unblocked you need to take into account the return |
| * value of those functions to make sure the software block is |
| * properly used. |
| * @query: query the rfkill block state(s) and call exactly one of the |
| * rfkill_set{,_hw,_sw}_state family of functions. Assign this |
| * method if input events can cause hardware state changes to make |
| * the rfkill core query your driver before setting a requested |
| * block. |
| * @set_block: turn the transmitter on (blocked == false) or off |
| * (blocked == true) -- ignore and return 0 when hard blocked. |
| * This callback must be assigned. |
| */ |
| struct rfkill_ops { |
| void (*poll)(struct rfkill *rfkill, void *data); |
| void (*query)(struct rfkill *rfkill, void *data); |
| int (*set_block)(void *data, bool blocked); |
| }; |
| |
| #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) |
| /** |
| * rfkill_alloc - allocate rfkill structure |
| * @name: name of the struct -- the string is not copied internally |
| * @parent: device that has rf switch on it |
| * @type: type of the switch (RFKILL_TYPE_*) |
| * @ops: rfkill methods |
| * @ops_data: data passed to each method |
| * |
| * This function should be called by the transmitter driver to allocate an |
| * rfkill structure. Returns %NULL on failure. |
| */ |
| struct rfkill * __must_check rfkill_alloc(const char *name, |
| struct device *parent, |
| const enum rfkill_type type, |
| const struct rfkill_ops *ops, |
| void *ops_data); |
| |
| /** |
| * rfkill_register - Register a rfkill structure. |
| * @rfkill: rfkill structure to be registered |
| * |
| * This function should be called by the transmitter driver to register |
| * the rfkill structure. Before calling this function the driver needs |
| * to be ready to service method calls from rfkill. |
| * |
| * If the software blocked state is not set before registration, |
| * set_block will be called to initialize it to a default value. |
| * |
| * If the hardware blocked state is not set before registration, |
| * it is assumed to be unblocked. |
| */ |
| int __must_check rfkill_register(struct rfkill *rfkill); |
| |
| /** |
| * rfkill_pause_polling(struct rfkill *rfkill) |
| * |
| * Pause polling -- say transmitter is off for other reasons. |
| * NOTE: not necessary for suspend/resume -- in that case the |
| * core stops polling anyway |
| */ |
| void rfkill_pause_polling(struct rfkill *rfkill); |
| |
| /** |
| * rfkill_resume_polling(struct rfkill *rfkill) |
| * |
| * Pause polling -- say transmitter is off for other reasons. |
| * NOTE: not necessary for suspend/resume -- in that case the |
| * core stops polling anyway |
| */ |
| void rfkill_resume_polling(struct rfkill *rfkill); |
| |
| |
| /** |
| * rfkill_unregister - Unregister a rfkill structure. |
| * @rfkill: rfkill structure to be unregistered |
| * |
| * This function should be called by the network driver during device |
| * teardown to destroy rfkill structure. Until it returns, the driver |
| * needs to be able to service method calls. |
| */ |
| void rfkill_unregister(struct rfkill *rfkill); |
| |
| /** |
| * rfkill_destroy - free rfkill structure |
| * @rfkill: rfkill structure to be destroyed |
| * |
| * Destroys the rfkill structure. |
| */ |
| void rfkill_destroy(struct rfkill *rfkill); |
| |
| /** |
| * rfkill_set_hw_state - Set the internal rfkill hardware block state |
| * @rfkill: pointer to the rfkill class to modify. |
| * @state: the current hardware block state to set |
| * |
| * rfkill drivers that get events when the hard-blocked state changes |
| * use this function to notify the rfkill core (and through that also |
| * userspace) of the current state. They should also use this after |
| * resume if the state could have changed. |
| * |
| * You need not (but may) call this function if poll_state is assigned. |
| * |
| * This function can be called in any context, even from within rfkill |
| * callbacks. |
| * |
| * The function returns the combined block state (true if transmitter |
| * should be blocked) so that drivers need not keep track of the soft |
| * block state -- which they might not be able to. |
| */ |
| bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); |
| |
| /** |
| * rfkill_set_sw_state - Set the internal rfkill software block state |
| * @rfkill: pointer to the rfkill class to modify. |
| * @state: the current software block state to set |
| * |
| * rfkill drivers that get events when the soft-blocked state changes |
| * (yes, some platforms directly act on input but allow changing again) |
| * use this function to notify the rfkill core (and through that also |
| * userspace) of the current state. It is not necessary to notify on |
| * resume; since hibernation can always change the soft-blocked state, |
| * the rfkill core will unconditionally restore the previous state. |
| * |
| * This function can be called in any context, even from within rfkill |
| * callbacks. |
| * |
| * The function returns the combined block state (true if transmitter |
| * should be blocked). |
| */ |
| bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); |
| |
| /** |
| * rfkill_set_states - Set the internal rfkill block states |
| * @rfkill: pointer to the rfkill class to modify. |
| * @sw: the current software block state to set |
| * @hw: the current hardware block state to set |
| * |
| * This function can be called in any context, even from within rfkill |
| * callbacks. |
| */ |
| void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); |
| |
| /** |
| * rfkill_blocked - query rfkill block |
| * |
| * @rfkill: rfkill struct to query |
| */ |
| bool rfkill_blocked(struct rfkill *rfkill); |
| #else /* !RFKILL */ |
| static inline struct rfkill * __must_check |
| rfkill_alloc(const char *name, |
| struct device *parent, |
| const enum rfkill_type type, |
| const struct rfkill_ops *ops, |
| void *ops_data) |
| { |
| return ERR_PTR(-ENODEV); |
| } |
| |
| static inline int __must_check rfkill_register(struct rfkill *rfkill) |
| { |
| if (rfkill == ERR_PTR(-ENODEV)) |
| return 0; |
| return -EINVAL; |
| } |
| |
| static inline void rfkill_pause_polling(struct rfkill *rfkill) |
| { |
| } |
| |
| static inline void rfkill_resume_polling(struct rfkill *rfkill) |
| { |
| } |
| |
| static inline void rfkill_unregister(struct rfkill *rfkill) |
| { |
| } |
| |
| static inline void rfkill_destroy(struct rfkill *rfkill) |
| { |
| } |
| |
| static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) |
| { |
| return blocked; |
| } |
| |
| static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) |
| { |
| return blocked; |
| } |
| |
| static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) |
| { |
| } |
| |
| static inline bool rfkill_blocked(struct rfkill *rfkill) |
| { |
| return false; |
| } |
| #endif /* RFKILL || RFKILL_MODULE */ |
| |
| |
| #ifdef CONFIG_RFKILL_LEDS |
| /** |
| * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED. |
| * This function might return a NULL pointer if registering of the |
| * LED trigger failed. Use this as "default_trigger" for the LED. |
| */ |
| const char *rfkill_get_led_trigger_name(struct rfkill *rfkill); |
| |
| /** |
| * rfkill_set_led_trigger_name -- set the LED trigger name |
| * @rfkill: rfkill struct |
| * @name: LED trigger name |
| * |
| * This function sets the LED trigger name of the radio LED |
| * trigger that rfkill creates. It is optional, but if called |
| * must be called before rfkill_register() to be effective. |
| */ |
| void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name); |
| #else |
| static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) |
| { |
| return NULL; |
| } |
| |
| static inline void |
| rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) |
| { |
| } |
| #endif |
| |
| #endif /* __KERNEL__ */ |
| |
| #endif /* RFKILL_H */ |