| /****************************************************************************** |
| * |
| * Module Name: evregion - ACPI address_space (op_region) handler dispatch |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2008, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include "accommon.h" |
| #include "acevents.h" |
| #include "acnamesp.h" |
| #include "acinterp.h" |
| |
| #define _COMPONENT ACPI_EVENTS |
| ACPI_MODULE_NAME("evregion") |
| |
| /* Local prototypes */ |
| static acpi_status |
| acpi_ev_reg_run(acpi_handle obj_handle, |
| u32 level, void *context, void **return_value); |
| |
| static acpi_status |
| acpi_ev_install_handler(acpi_handle obj_handle, |
| u32 level, void *context, void **return_value); |
| |
| /* These are the address spaces that will get default handlers */ |
| |
| #define ACPI_NUM_DEFAULT_SPACES 4 |
| |
| static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = { |
| ACPI_ADR_SPACE_SYSTEM_MEMORY, |
| ACPI_ADR_SPACE_SYSTEM_IO, |
| ACPI_ADR_SPACE_PCI_CONFIG, |
| ACPI_ADR_SPACE_DATA_TABLE |
| }; |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_install_region_handlers |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Installs the core subsystem default address space handlers. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_ev_install_region_handlers(void) |
| { |
| acpi_status status; |
| u32 i; |
| |
| ACPI_FUNCTION_TRACE(ev_install_region_handlers); |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* |
| * All address spaces (PCI Config, EC, SMBus) are scope dependent and |
| * registration must occur for a specific device. |
| * |
| * In the case of the system memory and IO address spaces there is |
| * currently no device associated with the address space. For these we |
| * use the root. |
| * |
| * We install the default PCI config space handler at the root so that |
| * this space is immediately available even though the we have not |
| * enumerated all the PCI Root Buses yet. This is to conform to the ACPI |
| * specification which states that the PCI config space must be always |
| * available -- even though we are nowhere near ready to find the PCI root |
| * buses at this point. |
| * |
| * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler |
| * has already been installed (via acpi_install_address_space_handler). |
| * Similar for AE_SAME_HANDLER. |
| */ |
| for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { |
| status = acpi_ev_install_space_handler(acpi_gbl_root_node, |
| acpi_gbl_default_address_spaces |
| [i], |
| ACPI_DEFAULT_HANDLER, |
| NULL, NULL); |
| switch (status) { |
| case AE_OK: |
| case AE_SAME_HANDLER: |
| case AE_ALREADY_EXISTS: |
| |
| /* These exceptions are all OK */ |
| |
| status = AE_OK; |
| break; |
| |
| default: |
| |
| goto unlock_and_exit; |
| } |
| } |
| |
| unlock_and_exit: |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_initialize_op_regions |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Execute _REG methods for all Operation Regions that have |
| * an installed default region handler. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_ev_initialize_op_regions(void) |
| { |
| acpi_status status; |
| u32 i; |
| |
| ACPI_FUNCTION_TRACE(ev_initialize_op_regions); |
| |
| status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Run the _REG methods for op_regions in each default address space */ |
| |
| for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) { |
| /* |
| * TBD: Make sure handler is the DEFAULT handler, otherwise |
| * _REG will have already been run. |
| */ |
| status = acpi_ev_execute_reg_methods(acpi_gbl_root_node, |
| acpi_gbl_default_address_spaces |
| [i]); |
| } |
| |
| (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_execute_reg_method |
| * |
| * PARAMETERS: region_obj - Region object |
| * Function - Passed to _REG: On (1) or Off (0) |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Execute _REG method for a region |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) |
| { |
| struct acpi_evaluate_info *info; |
| union acpi_operand_object *args[3]; |
| union acpi_operand_object *region_obj2; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(ev_execute_reg_method); |
| |
| region_obj2 = acpi_ns_get_secondary_object(region_obj); |
| if (!region_obj2) { |
| return_ACPI_STATUS(AE_NOT_EXIST); |
| } |
| |
| if (region_obj2->extra.method_REG == NULL) { |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* Allocate and initialize the evaluation information block */ |
| |
| info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); |
| if (!info) { |
| return_ACPI_STATUS(AE_NO_MEMORY); |
| } |
| |
| info->prefix_node = region_obj2->extra.method_REG; |
| info->pathname = NULL; |
| info->parameters = args; |
| info->flags = ACPI_IGNORE_RETURN_VALUE; |
| |
| /* |
| * The _REG method has two arguments: |
| * |
| * Arg0 - Integer: |
| * Operation region space ID Same value as region_obj->Region.space_id |
| * |
| * Arg1 - Integer: |
| * connection status 1 for connecting the handler, 0 for disconnecting |
| * the handler (Passed as a parameter) |
| */ |
| args[0] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); |
| if (!args[0]) { |
| status = AE_NO_MEMORY; |
| goto cleanup1; |
| } |
| |
| args[1] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); |
| if (!args[1]) { |
| status = AE_NO_MEMORY; |
| goto cleanup2; |
| } |
| |
| /* Setup the parameter objects */ |
| |
| args[0]->integer.value = region_obj->region.space_id; |
| args[1]->integer.value = function; |
| args[2] = NULL; |
| |
| /* Execute the method, no return value */ |
| |
| ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname |
| (ACPI_TYPE_METHOD, info->prefix_node, NULL)); |
| |
| status = acpi_ns_evaluate(info); |
| acpi_ut_remove_reference(args[1]); |
| |
| cleanup2: |
| acpi_ut_remove_reference(args[0]); |
| |
| cleanup1: |
| ACPI_FREE(info); |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_address_space_dispatch |
| * |
| * PARAMETERS: region_obj - Internal region object |
| * Function - Read or Write operation |
| * Address - Where in the space to read or write |
| * bit_width - Field width in bits (8, 16, 32, or 64) |
| * Value - Pointer to in or out value, must be |
| * full 64-bit acpi_integer |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Dispatch an address space or operation region access to |
| * a previously installed handler. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, |
| u32 function, |
| acpi_physical_address address, |
| u32 bit_width, acpi_integer * value) |
| { |
| acpi_status status; |
| acpi_adr_space_handler handler; |
| acpi_adr_space_setup region_setup; |
| union acpi_operand_object *handler_desc; |
| union acpi_operand_object *region_obj2; |
| void *region_context = NULL; |
| |
| ACPI_FUNCTION_TRACE(ev_address_space_dispatch); |
| |
| region_obj2 = acpi_ns_get_secondary_object(region_obj); |
| if (!region_obj2) { |
| return_ACPI_STATUS(AE_NOT_EXIST); |
| } |
| |
| /* Ensure that there is a handler associated with this region */ |
| |
| handler_desc = region_obj->region.handler; |
| if (!handler_desc) { |
| ACPI_ERROR((AE_INFO, |
| "No handler for Region [%4.4s] (%p) [%s]", |
| acpi_ut_get_node_name(region_obj->region.node), |
| region_obj, |
| acpi_ut_get_region_name(region_obj->region. |
| space_id))); |
| |
| return_ACPI_STATUS(AE_NOT_EXIST); |
| } |
| |
| /* |
| * It may be the case that the region has never been initialized. |
| * Some types of regions require special init code |
| */ |
| if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { |
| |
| /* This region has not been initialized yet, do it */ |
| |
| region_setup = handler_desc->address_space.setup; |
| if (!region_setup) { |
| |
| /* No initialization routine, exit with error */ |
| |
| ACPI_ERROR((AE_INFO, |
| "No init routine for region(%p) [%s]", |
| region_obj, |
| acpi_ut_get_region_name(region_obj->region. |
| space_id))); |
| return_ACPI_STATUS(AE_NOT_EXIST); |
| } |
| |
| /* |
| * We must exit the interpreter because the region setup will |
| * potentially execute control methods (for example, the _REG method |
| * for this region) |
| */ |
| acpi_ex_exit_interpreter(); |
| |
| status = region_setup(region_obj, ACPI_REGION_ACTIVATE, |
| handler_desc->address_space.context, |
| ®ion_context); |
| |
| /* Re-enter the interpreter */ |
| |
| acpi_ex_enter_interpreter(); |
| |
| /* Check for failure of the Region Setup */ |
| |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "During region initialization: [%s]", |
| acpi_ut_get_region_name(region_obj-> |
| region. |
| space_id))); |
| return_ACPI_STATUS(status); |
| } |
| |
| /* Region initialization may have been completed by region_setup */ |
| |
| if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) { |
| region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE; |
| |
| if (region_obj2->extra.region_context) { |
| |
| /* The handler for this region was already installed */ |
| |
| ACPI_FREE(region_context); |
| } else { |
| /* |
| * Save the returned context for use in all accesses to |
| * this particular region |
| */ |
| region_obj2->extra.region_context = |
| region_context; |
| } |
| } |
| } |
| |
| /* We have everything we need, we can invoke the address space handler */ |
| |
| handler = handler_desc->address_space.handler; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, |
| "Handler %p (@%p) Address %8.8X%8.8X [%s]\n", |
| ®ion_obj->region.handler->address_space, handler, |
| ACPI_FORMAT_NATIVE_UINT(address), |
| acpi_ut_get_region_name(region_obj->region. |
| space_id))); |
| |
| if (!(handler_desc->address_space.handler_flags & |
| ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) { |
| /* |
| * For handlers other than the default (supplied) handlers, we must |
| * exit the interpreter because the handler *might* block -- we don't |
| * know what it will do, so we can't hold the lock on the intepreter. |
| */ |
| acpi_ex_exit_interpreter(); |
| } |
| |
| /* Call the handler */ |
| |
| status = handler(function, address, bit_width, value, |
| handler_desc->address_space.context, |
| region_obj2->extra.region_context); |
| |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]", |
| acpi_ut_get_region_name(region_obj->region. |
| space_id))); |
| } |
| |
| if (!(handler_desc->address_space.handler_flags & |
| ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) { |
| /* |
| * We just returned from a non-default handler, we must re-enter the |
| * interpreter |
| */ |
| acpi_ex_enter_interpreter(); |
| } |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_detach_region |
| * |
| * PARAMETERS: region_obj - Region Object |
| * acpi_ns_is_locked - Namespace Region Already Locked? |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Break the association between the handler and the region |
| * this is a two way association. |
| * |
| ******************************************************************************/ |
| |
| void |
| acpi_ev_detach_region(union acpi_operand_object *region_obj, |
| u8 acpi_ns_is_locked) |
| { |
| union acpi_operand_object *handler_obj; |
| union acpi_operand_object *obj_desc; |
| union acpi_operand_object **last_obj_ptr; |
| acpi_adr_space_setup region_setup; |
| void **region_context; |
| union acpi_operand_object *region_obj2; |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(ev_detach_region); |
| |
| region_obj2 = acpi_ns_get_secondary_object(region_obj); |
| if (!region_obj2) { |
| return_VOID; |
| } |
| region_context = ®ion_obj2->extra.region_context; |
| |
| /* Get the address handler from the region object */ |
| |
| handler_obj = region_obj->region.handler; |
| if (!handler_obj) { |
| |
| /* This region has no handler, all done */ |
| |
| return_VOID; |
| } |
| |
| /* Find this region in the handler's list */ |
| |
| obj_desc = handler_obj->address_space.region_list; |
| last_obj_ptr = &handler_obj->address_space.region_list; |
| |
| while (obj_desc) { |
| |
| /* Is this the correct Region? */ |
| |
| if (obj_desc == region_obj) { |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, |
| "Removing Region %p from address handler %p\n", |
| region_obj, handler_obj)); |
| |
| /* This is it, remove it from the handler's list */ |
| |
| *last_obj_ptr = obj_desc->region.next; |
| obj_desc->region.next = NULL; /* Must clear field */ |
| |
| if (acpi_ns_is_locked) { |
| status = |
| acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return_VOID; |
| } |
| } |
| |
| /* Now stop region accesses by executing the _REG method */ |
| |
| status = acpi_ev_execute_reg_method(region_obj, 0); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "from region _REG, [%s]", |
| acpi_ut_get_region_name |
| (region_obj->region.space_id))); |
| } |
| |
| if (acpi_ns_is_locked) { |
| status = |
| acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE(status)) { |
| return_VOID; |
| } |
| } |
| |
| /* |
| * If the region has been activated, call the setup handler with |
| * the deactivate notification |
| */ |
| if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) { |
| region_setup = handler_obj->address_space.setup; |
| status = |
| region_setup(region_obj, |
| ACPI_REGION_DEACTIVATE, |
| handler_obj->address_space. |
| context, region_context); |
| |
| /* Init routine may fail, Just ignore errors */ |
| |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "from region handler - deactivate, [%s]", |
| acpi_ut_get_region_name |
| (region_obj->region. |
| space_id))); |
| } |
| |
| region_obj->region.flags &= |
| ~(AOPOBJ_SETUP_COMPLETE); |
| } |
| |
| /* |
| * Remove handler reference in the region |
| * |
| * NOTE: this doesn't mean that the region goes away, the region |
| * is just inaccessible as indicated to the _REG method |
| * |
| * If the region is on the handler's list, this must be the |
| * region's handler |
| */ |
| region_obj->region.handler = NULL; |
| acpi_ut_remove_reference(handler_obj); |
| |
| return_VOID; |
| } |
| |
| /* Walk the linked list of handlers */ |
| |
| last_obj_ptr = &obj_desc->region.next; |
| obj_desc = obj_desc->region.next; |
| } |
| |
| /* If we get here, the region was not in the handler's region list */ |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, |
| "Cannot remove region %p from address handler %p\n", |
| region_obj, handler_obj)); |
| |
| return_VOID; |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_attach_region |
| * |
| * PARAMETERS: handler_obj - Handler Object |
| * region_obj - Region Object |
| * acpi_ns_is_locked - Namespace Region Already Locked? |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Create the association between the handler and the region |
| * this is a two way association. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ev_attach_region(union acpi_operand_object *handler_obj, |
| union acpi_operand_object *region_obj, |
| u8 acpi_ns_is_locked) |
| { |
| |
| ACPI_FUNCTION_TRACE(ev_attach_region); |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, |
| "Adding Region [%4.4s] %p to address handler %p [%s]\n", |
| acpi_ut_get_node_name(region_obj->region.node), |
| region_obj, handler_obj, |
| acpi_ut_get_region_name(region_obj->region. |
| space_id))); |
| |
| /* Link this region to the front of the handler's list */ |
| |
| region_obj->region.next = handler_obj->address_space.region_list; |
| handler_obj->address_space.region_list = region_obj; |
| |
| /* Install the region's handler */ |
| |
| if (region_obj->region.handler) { |
| return_ACPI_STATUS(AE_ALREADY_EXISTS); |
| } |
| |
| region_obj->region.handler = handler_obj; |
| acpi_ut_add_reference(handler_obj); |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_install_handler |
| * |
| * PARAMETERS: walk_namespace callback |
| * |
| * DESCRIPTION: This routine installs an address handler into objects that are |
| * of type Region or Device. |
| * |
| * If the Object is a Device, and the device has a handler of |
| * the same type then the search is terminated in that branch. |
| * |
| * This is because the existing handler is closer in proximity |
| * to any more regions than the one we are trying to install. |
| * |
| ******************************************************************************/ |
| |
| static acpi_status |
| acpi_ev_install_handler(acpi_handle obj_handle, |
| u32 level, void *context, void **return_value) |
| { |
| union acpi_operand_object *handler_obj; |
| union acpi_operand_object *next_handler_obj; |
| union acpi_operand_object *obj_desc; |
| struct acpi_namespace_node *node; |
| acpi_status status; |
| |
| ACPI_FUNCTION_NAME(ev_install_handler); |
| |
| handler_obj = (union acpi_operand_object *)context; |
| |
| /* Parameter validation */ |
| |
| if (!handler_obj) { |
| return (AE_OK); |
| } |
| |
| /* Convert and validate the device handle */ |
| |
| node = acpi_ns_map_handle_to_node(obj_handle); |
| if (!node) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * We only care about regions and objects that are allowed to have |
| * address space handlers |
| */ |
| if ((node->type != ACPI_TYPE_DEVICE) && |
| (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { |
| return (AE_OK); |
| } |
| |
| /* Check for an existing internal object */ |
| |
| obj_desc = acpi_ns_get_attached_object(node); |
| if (!obj_desc) { |
| |
| /* No object, just exit */ |
| |
| return (AE_OK); |
| } |
| |
| /* Devices are handled different than regions */ |
| |
| if (obj_desc->common.type == ACPI_TYPE_DEVICE) { |
| |
| /* Check if this Device already has a handler for this address space */ |
| |
| next_handler_obj = obj_desc->device.handler; |
| while (next_handler_obj) { |
| |
| /* Found a handler, is it for the same address space? */ |
| |
| if (next_handler_obj->address_space.space_id == |
| handler_obj->address_space.space_id) { |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, |
| "Found handler for region [%s] in device %p(%p) handler %p\n", |
| acpi_ut_get_region_name |
| (handler_obj->address_space. |
| space_id), obj_desc, |
| next_handler_obj, |
| handler_obj)); |
| |
| /* |
| * Since the object we found it on was a device, then it |
| * means that someone has already installed a handler for |
| * the branch of the namespace from this device on. Just |
| * bail out telling the walk routine to not traverse this |
| * branch. This preserves the scoping rule for handlers. |
| */ |
| return (AE_CTRL_DEPTH); |
| } |
| |
| /* Walk the linked list of handlers attached to this device */ |
| |
| next_handler_obj = next_handler_obj->address_space.next; |
| } |
| |
| /* |
| * As long as the device didn't have a handler for this space we |
| * don't care about it. We just ignore it and proceed. |
| */ |
| return (AE_OK); |
| } |
| |
| /* Object is a Region */ |
| |
| if (obj_desc->region.space_id != handler_obj->address_space.space_id) { |
| |
| /* This region is for a different address space, just ignore it */ |
| |
| return (AE_OK); |
| } |
| |
| /* |
| * Now we have a region and it is for the handler's address space type. |
| * |
| * First disconnect region for any previous handler (if any) |
| */ |
| acpi_ev_detach_region(obj_desc, FALSE); |
| |
| /* Connect the region to the new handler */ |
| |
| status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE); |
| return (status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_install_space_handler |
| * |
| * PARAMETERS: Node - Namespace node for the device |
| * space_id - The address space ID |
| * Handler - Address of the handler |
| * Setup - Address of the setup function |
| * Context - Value passed to the handler on each access |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Install a handler for all op_regions of a given space_id. |
| * Assumes namespace is locked |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ev_install_space_handler(struct acpi_namespace_node * node, |
| acpi_adr_space_type space_id, |
| acpi_adr_space_handler handler, |
| acpi_adr_space_setup setup, void *context) |
| { |
| union acpi_operand_object *obj_desc; |
| union acpi_operand_object *handler_obj; |
| acpi_status status; |
| acpi_object_type type; |
| u8 flags = 0; |
| |
| ACPI_FUNCTION_TRACE(ev_install_space_handler); |
| |
| /* |
| * This registration is valid for only the types below and the root. This |
| * is where the default handlers get placed. |
| */ |
| if ((node->type != ACPI_TYPE_DEVICE) && |
| (node->type != ACPI_TYPE_PROCESSOR) && |
| (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) { |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| |
| if (handler == ACPI_DEFAULT_HANDLER) { |
| flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED; |
| |
| switch (space_id) { |
| case ACPI_ADR_SPACE_SYSTEM_MEMORY: |
| handler = acpi_ex_system_memory_space_handler; |
| setup = acpi_ev_system_memory_region_setup; |
| break; |
| |
| case ACPI_ADR_SPACE_SYSTEM_IO: |
| handler = acpi_ex_system_io_space_handler; |
| setup = acpi_ev_io_space_region_setup; |
| break; |
| |
| case ACPI_ADR_SPACE_PCI_CONFIG: |
| handler = acpi_ex_pci_config_space_handler; |
| setup = acpi_ev_pci_config_region_setup; |
| break; |
| |
| case ACPI_ADR_SPACE_CMOS: |
| handler = acpi_ex_cmos_space_handler; |
| setup = acpi_ev_cmos_region_setup; |
| break; |
| |
| case ACPI_ADR_SPACE_PCI_BAR_TARGET: |
| handler = acpi_ex_pci_bar_space_handler; |
| setup = acpi_ev_pci_bar_region_setup; |
| break; |
| |
| case ACPI_ADR_SPACE_DATA_TABLE: |
| handler = acpi_ex_data_table_space_handler; |
| setup = NULL; |
| break; |
| |
| default: |
| status = AE_BAD_PARAMETER; |
| goto unlock_and_exit; |
| } |
| } |
| |
| /* If the caller hasn't specified a setup routine, use the default */ |
| |
| if (!setup) { |
| setup = acpi_ev_default_region_setup; |
| } |
| |
| /* Check for an existing internal object */ |
| |
| obj_desc = acpi_ns_get_attached_object(node); |
| if (obj_desc) { |
| /* |
| * The attached device object already exists. Make sure the handler |
| * is not already installed. |
| */ |
| handler_obj = obj_desc->device.handler; |
| |
| /* Walk the handler list for this device */ |
| |
| while (handler_obj) { |
| |
| /* Same space_id indicates a handler already installed */ |
| |
| if (handler_obj->address_space.space_id == space_id) { |
| if (handler_obj->address_space.handler == |
| handler) { |
| /* |
| * It is (relatively) OK to attempt to install the SAME |
| * handler twice. This can easily happen with the |
| * PCI_Config space. |
| */ |
| status = AE_SAME_HANDLER; |
| goto unlock_and_exit; |
| } else { |
| /* A handler is already installed */ |
| |
| status = AE_ALREADY_EXISTS; |
| } |
| goto unlock_and_exit; |
| } |
| |
| /* Walk the linked list of handlers */ |
| |
| handler_obj = handler_obj->address_space.next; |
| } |
| } else { |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, |
| "Creating object on Device %p while installing handler\n", |
| node)); |
| |
| /* obj_desc does not exist, create one */ |
| |
| if (node->type == ACPI_TYPE_ANY) { |
| type = ACPI_TYPE_DEVICE; |
| } else { |
| type = node->type; |
| } |
| |
| obj_desc = acpi_ut_create_internal_object(type); |
| if (!obj_desc) { |
| status = AE_NO_MEMORY; |
| goto unlock_and_exit; |
| } |
| |
| /* Init new descriptor */ |
| |
| obj_desc->common.type = (u8) type; |
| |
| /* Attach the new object to the Node */ |
| |
| status = acpi_ns_attach_object(node, obj_desc, type); |
| |
| /* Remove local reference to the object */ |
| |
| acpi_ut_remove_reference(obj_desc); |
| |
| if (ACPI_FAILURE(status)) { |
| goto unlock_and_exit; |
| } |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, |
| "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n", |
| acpi_ut_get_region_name(space_id), space_id, |
| acpi_ut_get_node_name(node), node, obj_desc)); |
| |
| /* |
| * Install the handler |
| * |
| * At this point there is no existing handler. Just allocate the object |
| * for the handler and link it into the list. |
| */ |
| handler_obj = |
| acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER); |
| if (!handler_obj) { |
| status = AE_NO_MEMORY; |
| goto unlock_and_exit; |
| } |
| |
| /* Init handler obj */ |
| |
| handler_obj->address_space.space_id = (u8) space_id; |
| handler_obj->address_space.handler_flags = flags; |
| handler_obj->address_space.region_list = NULL; |
| handler_obj->address_space.node = node; |
| handler_obj->address_space.handler = handler; |
| handler_obj->address_space.context = context; |
| handler_obj->address_space.setup = setup; |
| |
| /* Install at head of Device.address_space list */ |
| |
| handler_obj->address_space.next = obj_desc->device.handler; |
| |
| /* |
| * The Device object is the first reference on the handler_obj. |
| * Each region that uses the handler adds a reference. |
| */ |
| obj_desc->device.handler = handler_obj; |
| |
| /* |
| * Walk the namespace finding all of the regions this |
| * handler will manage. |
| * |
| * Start at the device and search the branch toward |
| * the leaf nodes until either the leaf is encountered or |
| * a device is detected that has an address handler of the |
| * same type. |
| * |
| * In either case, back up and search down the remainder |
| * of the branch |
| */ |
| status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, |
| ACPI_NS_WALK_UNLOCK, |
| acpi_ev_install_handler, handler_obj, |
| NULL); |
| |
| unlock_and_exit: |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_execute_reg_methods |
| * |
| * PARAMETERS: Node - Namespace node for the device |
| * space_id - The address space ID |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Run all _REG methods for the input Space ID; |
| * Note: assumes namespace is locked, or system init time. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, |
| acpi_adr_space_type space_id) |
| { |
| acpi_status status; |
| |
| ACPI_FUNCTION_TRACE(ev_execute_reg_methods); |
| |
| /* |
| * Run all _REG methods for all Operation Regions for this space ID. This |
| * is a separate walk in order to handle any interdependencies between |
| * regions and _REG methods. (i.e. handlers must be installed for all |
| * regions of this Space ID before we can run any _REG methods) |
| */ |
| status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX, |
| ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run, |
| &space_id, NULL); |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ev_reg_run |
| * |
| * PARAMETERS: walk_namespace callback |
| * |
| * DESCRIPTION: Run _REG method for region objects of the requested space_iD |
| * |
| ******************************************************************************/ |
| |
| static acpi_status |
| acpi_ev_reg_run(acpi_handle obj_handle, |
| u32 level, void *context, void **return_value) |
| { |
| union acpi_operand_object *obj_desc; |
| struct acpi_namespace_node *node; |
| acpi_adr_space_type space_id; |
| acpi_status status; |
| |
| space_id = *ACPI_CAST_PTR(acpi_adr_space_type, context); |
| |
| /* Convert and validate the device handle */ |
| |
| node = acpi_ns_map_handle_to_node(obj_handle); |
| if (!node) { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * We only care about regions.and objects that are allowed to have address |
| * space handlers |
| */ |
| if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) { |
| return (AE_OK); |
| } |
| |
| /* Check for an existing internal object */ |
| |
| obj_desc = acpi_ns_get_attached_object(node); |
| if (!obj_desc) { |
| |
| /* No object, just exit */ |
| |
| return (AE_OK); |
| } |
| |
| /* Object is a Region */ |
| |
| if (obj_desc->region.space_id != space_id) { |
| |
| /* This region is for a different address space, just ignore it */ |
| |
| return (AE_OK); |
| } |
| |
| status = acpi_ev_execute_reg_method(obj_desc, 1); |
| return (status); |
| } |