| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "msm8916.dtsi" |
| #include "pm8916.dtsi" |
| #include "apq8016-sbc-soc-pins.dtsi" |
| #include "apq8016-sbc-pmic-pins.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/sound/apq8016-lpass.h> |
| |
| / { |
| aliases { |
| serial0 = &blsp1_uart2; |
| serial1 = &blsp1_uart1; |
| usid0 = &pm8916_0; |
| i2c0 = &blsp_i2c2; |
| i2c1 = &blsp_i2c6; |
| i2c3 = &blsp_i2c4; |
| spi0 = &blsp_spi5; |
| spi1 = &blsp_spi3; |
| }; |
| |
| chosen { |
| stdout-path = "serial0"; |
| }; |
| |
| reserved-memory { |
| ramoops@bff00000{ |
| compatible = "ramoops"; |
| reg = <0x0 0xbff00000 0x0 0x100000>; |
| |
| record-size = <0x20000>; |
| console-size = <0x20000>; |
| ftrace-size = <0x20000>; |
| }; |
| }; |
| |
| soc { |
| dma@7884000 { |
| status = "okay"; |
| }; |
| |
| serial@78af000 { |
| label = "LS-UART0"; |
| status = "okay"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&blsp1_uart1_default>; |
| pinctrl-1 = <&blsp1_uart1_sleep>; |
| }; |
| |
| serial@78b0000 { |
| label = "LS-UART1"; |
| status = "okay"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&blsp1_uart2_default>; |
| pinctrl-1 = <&blsp1_uart2_sleep>; |
| }; |
| |
| i2c@78b6000 { |
| /* On Low speed expansion */ |
| label = "LS-I2C0"; |
| status = "okay"; |
| }; |
| |
| i2c@78b8000 { |
| /* On High speed expansion */ |
| label = "HS-I2C2"; |
| status = "okay"; |
| |
| adv_bridge: bridge@39 { |
| status = "okay"; |
| |
| compatible = "adi,adv7533"; |
| reg = <0x39>; |
| |
| interrupt-parent = <&msmgpio>; |
| interrupts = <31 2>; |
| |
| adi,dsi-lanes = <4>; |
| clocks = <&rpmcc RPM_SMD_BB_CLK2>; |
| clock-names = "cec"; |
| |
| pd-gpios = <&msmgpio 32 0>; |
| |
| avdd-supply = <&pm8916_l6>; |
| v1p2-supply = <&pm8916_l6>; |
| v3p3-supply = <&pm8916_l17>; |
| |
| pinctrl-names = "default","sleep"; |
| pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; |
| pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; |
| #sound-dai-cells = <1>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| adv7533_in: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| adv7533_out: endpoint { |
| remote-endpoint = <&hdmi_con>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| i2c@78ba000 { |
| /* On Low speed expansion */ |
| label = "LS-I2C1"; |
| status = "okay"; |
| }; |
| |
| spi@78b7000 { |
| /* On High speed expansion */ |
| label = "HS-SPI1"; |
| status = "okay"; |
| }; |
| |
| spi@78b9000 { |
| /* On Low speed expansion */ |
| label = "LS-SPI0"; |
| status = "okay"; |
| }; |
| |
| leds { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&msmgpio_leds>, |
| <&pm8916_gpios_leds>, |
| <&pm8916_mpps_leds>; |
| |
| compatible = "gpio-leds"; |
| |
| led@1 { |
| label = "apq8016-sbc:green:user1"; |
| gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| default-state = "off"; |
| }; |
| |
| led@2 { |
| label = "apq8016-sbc:green:user2"; |
| gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "mmc0"; |
| default-state = "off"; |
| }; |
| |
| led@3 { |
| label = "apq8016-sbc:green:user3"; |
| gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "mmc1"; |
| default-state = "off"; |
| }; |
| |
| led@4 { |
| label = "apq8016-sbc:green:user4"; |
| gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "none"; |
| default-state = "off"; |
| }; |
| |
| led@5 { |
| label = "apq8016-sbc:yellow:wlan"; |
| gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "phy0tx"; |
| default-state = "off"; |
| }; |
| |
| led@6 { |
| label = "apq8016-sbc:blue:bt"; |
| gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "bluetooth-power"; |
| default-state = "off"; |
| }; |
| }; |
| |
| sdhci@07824000 { |
| vmmc-supply = <&pm8916_l8>; |
| vqmmc-supply = <&pm8916_l5>; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; |
| status = "okay"; |
| }; |
| |
| sdhci@07864000 { |
| vmmc-supply = <&pm8916_l11>; |
| vqmmc-supply = <&pm8916_l12>; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
| |
| cd-gpios = <&msmgpio 38 0x1>; |
| status = "okay"; |
| }; |
| |
| usb@78d9000 { |
| extcon = <&usb_id>; |
| status = "okay"; |
| adp-disable; |
| hnp-disable; |
| srp-disable; |
| dr_mode = "host"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_sw_sel_pm>; |
| ulpi { |
| phy { |
| v1p8-supply = <&pm8916_l7>; |
| v3p3-supply = <&pm8916_l13>; |
| extcon = <&usb_id>; |
| }; |
| }; |
| }; |
| |
| lpass@07708000 { |
| status = "okay"; |
| }; |
| |
| mdss@1a00000 { |
| status = "okay"; |
| |
| mdp@1a01000 { |
| status = "okay"; |
| }; |
| |
| dsi@1a98000 { |
| status = "okay"; |
| |
| vdda-supply = <&pm8916_l2>; |
| vddio-supply = <&pm8916_l6>; |
| |
| ports { |
| port@1 { |
| endpoint { |
| remote-endpoint = <&adv7533_in>; |
| data-lanes = <0 1 2 3>; |
| }; |
| }; |
| }; |
| }; |
| |
| dsi-phy@1a98300 { |
| status = "okay"; |
| |
| vddio-supply = <&pm8916_l6>; |
| }; |
| }; |
| |
| lpass_codec: codec{ |
| status = "okay"; |
| }; |
| |
| /* |
| Internal Codec |
| playback - Primary MI2S |
| capture - Ter MI2S |
| |
| External Primary: |
| playback - secondary MI2S |
| capture - Quat MI2S |
| |
| External Secondary: |
| playback - Quat MI2S |
| capture - Quat MI2S |
| |
| */ |
| |
| sound: sound { |
| compatible = "qcom,apq8016-sbc-sndcard"; |
| reg = <0x07702000 0x4>, <0x07702004 0x4>; |
| reg-names = "mic-iomux", "spkr-iomux"; |
| |
| status = "okay"; |
| pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; |
| pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; |
| pinctrl-names = "default", "sleep"; |
| qcom,model = "DB410c"; |
| qcom,audio-routing = |
| "AMIC2", "MIC BIAS Internal2", |
| "AMIC3", "MIC BIAS External1"; |
| external-dai-link@0 { |
| link-name = "ADV7533"; |
| cpu { /* QUAT */ |
| sound-dai = <&lpass MI2S_QUATERNARY>; |
| }; |
| codec { |
| sound-dai = <&adv_bridge 0>; |
| }; |
| }; |
| |
| internal-codec-playback-dai-link@0 { /* I2S - Internal codec */ |
| link-name = "WCD"; |
| cpu { /* PRIMARY */ |
| sound-dai = <&lpass MI2S_PRIMARY>; |
| }; |
| codec { |
| sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; |
| }; |
| }; |
| |
| internal-codec-capture-dai-link@0 { /* I2S - Internal codec */ |
| link-name = "WCD-Capture"; |
| cpu { /* PRIMARY */ |
| sound-dai = <&lpass MI2S_TERTIARY>; |
| }; |
| codec { |
| sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; |
| }; |
| }; |
| }; |
| |
| wcnss@a21b000 { |
| status = "okay"; |
| }; |
| }; |
| |
| usb2513 { |
| compatible = "smsc,usb3503"; |
| reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>; |
| initial-mode = <1>; |
| }; |
| |
| usb_id: usb-id { |
| compatible = "linux,extcon-usb-gpio"; |
| vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_id_default>; |
| }; |
| |
| hdmi-out { |
| compatible = "hdmi-connector"; |
| type = "a"; |
| |
| port { |
| hdmi_con: endpoint { |
| remote-endpoint = <&adv7533_out>; |
| }; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| autorepeat; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&msm_key_volp_n_default>; |
| |
| button@0 { |
| label = "Volume Up"; |
| linux,code = <KEY_VOLUMEUP>; |
| gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &wcd_codec { |
| status = "okay"; |
| clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; |
| clock-names = "mclk"; |
| }; |
| |
| &smd_rpm_regulators { |
| vdd_l1_l2_l3-supply = <&pm8916_s3>; |
| vdd_l5-supply = <&pm8916_s3>; |
| vdd_l4_l5_l6-supply = <&pm8916_s4>; |
| vdd_l7-supply = <&pm8916_s4>; |
| |
| s1 { |
| regulator-min-microvolt = <375000>; |
| regulator-max-microvolt = <1562000>; |
| }; |
| |
| s3 { |
| regulator-min-microvolt = <375000>; |
| regulator-max-microvolt = <1562000>; |
| }; |
| |
| s4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| l1 { |
| regulator-min-microvolt = <375000>; |
| regulator-max-microvolt = <1525000>; |
| }; |
| |
| l2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| l3 { |
| regulator-min-microvolt = <375000>; |
| regulator-max-microvolt = <1525000>; |
| }; |
| |
| l4 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l5 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| l7 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l8 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l9 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l10 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l11 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| regulator-allow-set-load; |
| regulator-system-load = <200000>; |
| }; |
| |
| l12 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l13 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l14 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| /** |
| * 1.8v required on LS expansion |
| * for mezzanine boards |
| */ |
| l15 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| regulator-always-on; |
| }; |
| |
| l16 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| |
| l17 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| l18 { |
| regulator-min-microvolt = <1750000>; |
| regulator-max-microvolt = <3337000>; |
| }; |
| }; |