| /* |
| * MPC8272 ADS Device Tree Source |
| * |
| * Copyright 2005,2008 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "MPC8272ADS"; |
| compatible = "fsl,mpc8272ads"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8272@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| d-cache-line-size = <32>; |
| i-cache-line-size = <32>; |
| d-cache-size = <16384>; |
| i-cache-size = <16384>; |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x0>; |
| }; |
| |
| localbus@f0010100 { |
| compatible = "fsl,mpc8272-localbus", |
| "fsl,pq2-localbus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| reg = <0xf0010100 0x40>; |
| |
| ranges = <0x0 0x0 0xfe000000 0x2000000 |
| 0x1 0x0 0xf4500000 0x8000 |
| 0x3 0x0 0xf8200000 0x8000>; |
| |
| flash@0,0 { |
| compatible = "jedec-flash"; |
| reg = <0x0 0x0 0x2000000>; |
| bank-width = <4>; |
| device-width = <1>; |
| }; |
| |
| board-control@1,0 { |
| reg = <0x1 0x0 0x20>; |
| compatible = "fsl,mpc8272ads-bcsr"; |
| }; |
| |
| PCI_PIC: interrupt-controller@3,0 { |
| compatible = "fsl,mpc8272ads-pci-pic", |
| "fsl,pq2ads-pci-pic"; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| reg = <0x3 0x0 0x8>; |
| interrupt-parent = <&PIC>; |
| interrupts = <20 8>; |
| }; |
| }; |
| |
| |
| pci@f0010800 { |
| device_type = "pci"; |
| reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; |
| compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| clock-frequency = <66666666>; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x16 */ |
| 0xb000 0x0 0x0 0x1 &PCI_PIC 0 |
| 0xb000 0x0 0x0 0x2 &PCI_PIC 1 |
| 0xb000 0x0 0x0 0x3 &PCI_PIC 2 |
| 0xb000 0x0 0x0 0x4 &PCI_PIC 3 |
| |
| /* IDSEL 0x17 */ |
| 0xb800 0x0 0x0 0x1 &PCI_PIC 4 |
| 0xb800 0x0 0x0 0x2 &PCI_PIC 5 |
| 0xb800 0x0 0x0 0x3 &PCI_PIC 6 |
| 0xb800 0x0 0x0 0x4 &PCI_PIC 7 |
| |
| /* IDSEL 0x18 */ |
| 0xc000 0x0 0x0 0x1 &PCI_PIC 8 |
| 0xc000 0x0 0x0 0x2 &PCI_PIC 9 |
| 0xc000 0x0 0x0 0x3 &PCI_PIC 10 |
| 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; |
| |
| interrupt-parent = <&PIC>; |
| interrupts = <18 8>; |
| ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 |
| 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; |
| }; |
| |
| soc@f0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,mpc8272", "fsl,pq2-soc"; |
| ranges = <0x0 0xf0000000 0x53000>; |
| |
| // Temporary -- will go away once kernel uses ranges for get_immrbase(). |
| reg = <0xf0000000 0x53000>; |
| |
| cpm@119c0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; |
| reg = <0x119c0 0x30>; |
| ranges; |
| |
| muram@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x10000>; |
| |
| data@0 { |
| compatible = "fsl,cpm-muram-data"; |
| reg = <0x0 0x2000 0x9800 0x800>; |
| }; |
| }; |
| |
| brg@119f0 { |
| compatible = "fsl,mpc8272-brg", |
| "fsl,cpm2-brg", |
| "fsl,cpm-brg"; |
| reg = <0x119f0 0x10 0x115f0 0x10>; |
| }; |
| |
| serial@11a00 { |
| device_type = "serial"; |
| compatible = "fsl,mpc8272-scc-uart", |
| "fsl,cpm2-scc-uart"; |
| reg = <0x11a00 0x20 0x8000 0x100>; |
| interrupts = <40 8>; |
| interrupt-parent = <&PIC>; |
| fsl,cpm-brg = <1>; |
| fsl,cpm-command = <0x800000>; |
| }; |
| |
| serial@11a60 { |
| device_type = "serial"; |
| compatible = "fsl,mpc8272-scc-uart", |
| "fsl,cpm2-scc-uart"; |
| reg = <0x11a60 0x20 0x8300 0x100>; |
| interrupts = <43 8>; |
| interrupt-parent = <&PIC>; |
| fsl,cpm-brg = <4>; |
| fsl,cpm-command = <0xce00000>; |
| }; |
| |
| mdio@10d40 { |
| device_type = "mdio"; |
| compatible = "fsl,mpc8272ads-mdio-bitbang", |
| "fsl,mpc8272-mdio-bitbang", |
| "fsl,cpm2-mdio-bitbang"; |
| reg = <0x10d40 0x14>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| fsl,mdio-pin = <18>; |
| fsl,mdc-pin = <19>; |
| |
| PHY0: ethernet-phy@0 { |
| interrupt-parent = <&PIC>; |
| interrupts = <23 8>; |
| reg = <0x0>; |
| device_type = "ethernet-phy"; |
| }; |
| |
| PHY1: ethernet-phy@1 { |
| interrupt-parent = <&PIC>; |
| interrupts = <23 8>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| ethernet@11300 { |
| device_type = "network"; |
| compatible = "fsl,mpc8272-fcc-enet", |
| "fsl,cpm2-fcc-enet"; |
| reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <32 8>; |
| interrupt-parent = <&PIC>; |
| phy-handle = <&PHY0>; |
| linux,network-index = <0>; |
| fsl,cpm-command = <0x12000300>; |
| }; |
| |
| ethernet@11320 { |
| device_type = "network"; |
| compatible = "fsl,mpc8272-fcc-enet", |
| "fsl,cpm2-fcc-enet"; |
| reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <33 8>; |
| interrupt-parent = <&PIC>; |
| phy-handle = <&PHY1>; |
| linux,network-index = <1>; |
| fsl,cpm-command = <0x16200300>; |
| }; |
| }; |
| |
| PIC: interrupt-controller@10c00 { |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| reg = <0x10c00 0x80>; |
| compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; |
| }; |
| |
| /* May need to remove if on a part without crypto engine */ |
| crypto@30000 { |
| device_type = "crypto"; |
| model = "SEC2"; |
| compatible = "fsl,mpc8272-talitos-sec2", |
| "fsl,talitos-sec2", |
| "fsl,talitos", |
| "talitos"; |
| reg = <0x30000 0x10000>; |
| interrupts = <11 8>; |
| interrupt-parent = <&PIC>; |
| num-channels = <4>; |
| channel-fifo-len = <24>; |
| exec-units-mask = <0x7e>; |
| /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ |
| descriptor-types-mask = <0x1010ebf>; |
| }; |
| }; |
| |
| chosen { |
| linux,stdout-path = "/soc/cpm/serial@11a00"; |
| }; |
| }; |