| /* |
| * Toshiba TMIO NAND flash controller driver |
| * |
| * Slightly murky pre-git history of the driver: |
| * |
| * Copyright (c) Ian Molton 2004, 2005, 2008 |
| * Original work, independent of sharps code. Included hardware ECC support. |
| * Hard ECC did not work for writes in the early revisions. |
| * Copyright (c) Dirk Opfer 2005. |
| * Modifications developed from sharps code but |
| * NOT containing any, ported onto Ians base. |
| * Copyright (c) Chris Humbert 2005 |
| * Copyright (c) Dmitry Baryshkov 2008 |
| * Minor fixes |
| * |
| * Parts copyright Sebastian Carlier |
| * |
| * This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| */ |
| |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/tmio.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/rawnand.h> |
| #include <linux/mtd/nand_ecc.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/slab.h> |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| /* |
| * NAND Flash Host Controller Configuration Register |
| */ |
| #define CCR_COMMAND 0x04 /* w Command */ |
| #define CCR_BASE 0x10 /* l NAND Flash Control Reg Base Addr */ |
| #define CCR_INTP 0x3d /* b Interrupt Pin */ |
| #define CCR_INTE 0x48 /* b Interrupt Enable */ |
| #define CCR_EC 0x4a /* b Event Control */ |
| #define CCR_ICC 0x4c /* b Internal Clock Control */ |
| #define CCR_ECCC 0x5b /* b ECC Control */ |
| #define CCR_NFTC 0x60 /* b NAND Flash Transaction Control */ |
| #define CCR_NFM 0x61 /* b NAND Flash Monitor */ |
| #define CCR_NFPSC 0x62 /* b NAND Flash Power Supply Control */ |
| #define CCR_NFDC 0x63 /* b NAND Flash Detect Control */ |
| |
| /* |
| * NAND Flash Control Register |
| */ |
| #define FCR_DATA 0x00 /* bwl Data Register */ |
| #define FCR_MODE 0x04 /* b Mode Register */ |
| #define FCR_STATUS 0x05 /* b Status Register */ |
| #define FCR_ISR 0x06 /* b Interrupt Status Register */ |
| #define FCR_IMR 0x07 /* b Interrupt Mask Register */ |
| |
| /* FCR_MODE Register Command List */ |
| #define FCR_MODE_DATA 0x94 /* Data Data_Mode */ |
| #define FCR_MODE_COMMAND 0x95 /* Data Command_Mode */ |
| #define FCR_MODE_ADDRESS 0x96 /* Data Address_Mode */ |
| |
| #define FCR_MODE_HWECC_CALC 0xB4 /* HW-ECC Data */ |
| #define FCR_MODE_HWECC_RESULT 0xD4 /* HW-ECC Calc result Read_Mode */ |
| #define FCR_MODE_HWECC_RESET 0xF4 /* HW-ECC Reset */ |
| |
| #define FCR_MODE_POWER_ON 0x0C /* Power Supply ON to SSFDC card */ |
| #define FCR_MODE_POWER_OFF 0x08 /* Power Supply OFF to SSFDC card */ |
| |
| #define FCR_MODE_LED_OFF 0x00 /* LED OFF */ |
| #define FCR_MODE_LED_ON 0x04 /* LED ON */ |
| |
| #define FCR_MODE_EJECT_ON 0x68 /* Ejection events active */ |
| #define FCR_MODE_EJECT_OFF 0x08 /* Ejection events ignored */ |
| |
| #define FCR_MODE_LOCK 0x6C /* Lock_Mode. Eject Switch Invalid */ |
| #define FCR_MODE_UNLOCK 0x0C /* UnLock_Mode. Eject Switch is valid */ |
| |
| #define FCR_MODE_CONTROLLER_ID 0x40 /* Controller ID Read */ |
| #define FCR_MODE_STANDBY 0x00 /* SSFDC card Changes Standby State */ |
| |
| #define FCR_MODE_WE 0x80 |
| #define FCR_MODE_ECC1 0x40 |
| #define FCR_MODE_ECC0 0x20 |
| #define FCR_MODE_CE 0x10 |
| #define FCR_MODE_PCNT1 0x08 |
| #define FCR_MODE_PCNT0 0x04 |
| #define FCR_MODE_ALE 0x02 |
| #define FCR_MODE_CLE 0x01 |
| |
| #define FCR_STATUS_BUSY 0x80 |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| struct tmio_nand { |
| struct nand_chip chip; |
| |
| struct platform_device *dev; |
| |
| void __iomem *ccr; |
| void __iomem *fcr; |
| unsigned long fcr_base; |
| |
| unsigned int irq; |
| |
| /* for tmio_nand_read_byte */ |
| u8 read; |
| unsigned read_good:1; |
| }; |
| |
| static inline struct tmio_nand *mtd_to_tmio(struct mtd_info *mtd) |
| { |
| return container_of(mtd_to_nand(mtd), struct tmio_nand, chip); |
| } |
| |
| |
| /*--------------------------------------------------------------------------*/ |
| |
| static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd, |
| unsigned int ctrl) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| struct nand_chip *chip = mtd_to_nand(mtd); |
| |
| if (ctrl & NAND_CTRL_CHANGE) { |
| u8 mode; |
| |
| if (ctrl & NAND_NCE) { |
| mode = FCR_MODE_DATA; |
| |
| if (ctrl & NAND_CLE) |
| mode |= FCR_MODE_CLE; |
| else |
| mode &= ~FCR_MODE_CLE; |
| |
| if (ctrl & NAND_ALE) |
| mode |= FCR_MODE_ALE; |
| else |
| mode &= ~FCR_MODE_ALE; |
| } else { |
| mode = FCR_MODE_STANDBY; |
| } |
| |
| tmio_iowrite8(mode, tmio->fcr + FCR_MODE); |
| tmio->read_good = 0; |
| } |
| |
| if (cmd != NAND_CMD_NONE) |
| tmio_iowrite8(cmd, chip->IO_ADDR_W); |
| } |
| |
| static int tmio_nand_dev_ready(struct mtd_info *mtd) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| |
| return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY); |
| } |
| |
| static irqreturn_t tmio_irq(int irq, void *__tmio) |
| { |
| struct tmio_nand *tmio = __tmio; |
| struct nand_chip *nand_chip = &tmio->chip; |
| |
| /* disable RDYREQ interrupt */ |
| tmio_iowrite8(0x00, tmio->fcr + FCR_IMR); |
| |
| if (unlikely(!waitqueue_active(&nand_chip->controller->wq))) |
| dev_warn(&tmio->dev->dev, "spurious interrupt\n"); |
| |
| wake_up(&nand_chip->controller->wq); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB. |
| *This interrupt is normally disabled, but for long operations like |
| *erase and write, we enable it to wake us up. The irq handler |
| *disables the interrupt. |
| */ |
| static int |
| tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| long timeout; |
| |
| /* enable RDYREQ interrupt */ |
| tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR); |
| tmio_iowrite8(0x81, tmio->fcr + FCR_IMR); |
| |
| timeout = wait_event_timeout(nand_chip->controller->wq, |
| tmio_nand_dev_ready(mtd), |
| msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20)); |
| |
| if (unlikely(!tmio_nand_dev_ready(mtd))) { |
| tmio_iowrite8(0x00, tmio->fcr + FCR_IMR); |
| dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n", |
| nand_chip->state == FL_ERASING ? "erase" : "program", |
| nand_chip->state == FL_ERASING ? 400 : 20); |
| |
| } else if (unlikely(!timeout)) { |
| tmio_iowrite8(0x00, tmio->fcr + FCR_IMR); |
| dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n"); |
| } |
| |
| nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); |
| return nand_chip->read_byte(mtd); |
| } |
| |
| /* |
| *The TMIO controller combines two 8-bit data bytes into one 16-bit |
| *word. This function separates them so nand_base.c works as expected, |
| *especially its NAND_CMD_READID routines. |
| * |
| *To prevent stale data from being read, tmio_nand_hwcontrol() clears |
| *tmio->read_good. |
| */ |
| static u_char tmio_nand_read_byte(struct mtd_info *mtd) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| unsigned int data; |
| |
| if (tmio->read_good--) |
| return tmio->read; |
| |
| data = tmio_ioread16(tmio->fcr + FCR_DATA); |
| tmio->read = data >> 8; |
| return data; |
| } |
| |
| /* |
| *The TMIO controller converts an 8-bit NAND interface to a 16-bit |
| *bus interface, so all data reads and writes must be 16-bit wide. |
| *Thus, we implement 16-bit versions of the read, write, and verify |
| *buffer functions. |
| */ |
| static void |
| tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| |
| tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1); |
| } |
| |
| static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| |
| tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1); |
| } |
| |
| static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| |
| tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE); |
| tmio_ioread8(tmio->fcr + FCR_DATA); /* dummy read */ |
| tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE); |
| } |
| |
| static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, |
| u_char *ecc_code) |
| { |
| struct tmio_nand *tmio = mtd_to_tmio(mtd); |
| unsigned int ecc; |
| |
| tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE); |
| |
| ecc = tmio_ioread16(tmio->fcr + FCR_DATA); |
| ecc_code[1] = ecc; /* 000-255 LP7-0 */ |
| ecc_code[0] = ecc >> 8; /* 000-255 LP15-8 */ |
| ecc = tmio_ioread16(tmio->fcr + FCR_DATA); |
| ecc_code[2] = ecc; /* 000-255 CP5-0,11b */ |
| ecc_code[4] = ecc >> 8; /* 256-511 LP7-0 */ |
| ecc = tmio_ioread16(tmio->fcr + FCR_DATA); |
| ecc_code[3] = ecc; /* 256-511 LP15-8 */ |
| ecc_code[5] = ecc >> 8; /* 256-511 CP5-0,11b */ |
| |
| tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE); |
| return 0; |
| } |
| |
| static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf, |
| unsigned char *read_ecc, unsigned char *calc_ecc) |
| { |
| int r0, r1; |
| |
| /* assume ecc.size = 512 and ecc.bytes = 6 */ |
| r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256); |
| if (r0 < 0) |
| return r0; |
| r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256); |
| if (r1 < 0) |
| return r1; |
| return r0 + r1; |
| } |
| |
| static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio) |
| { |
| const struct mfd_cell *cell = mfd_get_cell(dev); |
| int ret; |
| |
| if (cell->enable) { |
| ret = cell->enable(dev); |
| if (ret) |
| return ret; |
| } |
| |
| /* (4Ch) CLKRUN Enable 1st spcrunc */ |
| tmio_iowrite8(0x81, tmio->ccr + CCR_ICC); |
| |
| /* (10h)BaseAddress 0x1000 spba.spba2 */ |
| tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE); |
| tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2); |
| |
| /* (04h)Command Register I/O spcmd */ |
| tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND); |
| |
| /* (62h) Power Supply Control ssmpwc */ |
| /* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */ |
| tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC); |
| |
| /* (63h) Detect Control ssmdtc */ |
| tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC); |
| |
| /* Interrupt status register clear sintst */ |
| tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR); |
| |
| /* After power supply, Media are reset smode */ |
| tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE); |
| tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE); |
| tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA); |
| |
| /* Standby Mode smode */ |
| tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE); |
| |
| mdelay(5); |
| |
| return 0; |
| } |
| |
| static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio) |
| { |
| const struct mfd_cell *cell = mfd_get_cell(dev); |
| |
| tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE); |
| if (cell->disable) |
| cell->disable(dev); |
| } |
| |
| static int tmio_probe(struct platform_device *dev) |
| { |
| struct tmio_nand_data *data = dev_get_platdata(&dev->dev); |
| struct resource *fcr = platform_get_resource(dev, |
| IORESOURCE_MEM, 0); |
| struct resource *ccr = platform_get_resource(dev, |
| IORESOURCE_MEM, 1); |
| int irq = platform_get_irq(dev, 0); |
| struct tmio_nand *tmio; |
| struct mtd_info *mtd; |
| struct nand_chip *nand_chip; |
| int retval; |
| |
| if (data == NULL) |
| dev_warn(&dev->dev, "NULL platform data!\n"); |
| |
| tmio = devm_kzalloc(&dev->dev, sizeof(*tmio), GFP_KERNEL); |
| if (!tmio) |
| return -ENOMEM; |
| |
| tmio->dev = dev; |
| |
| platform_set_drvdata(dev, tmio); |
| nand_chip = &tmio->chip; |
| mtd = nand_to_mtd(nand_chip); |
| mtd->name = "tmio-nand"; |
| mtd->dev.parent = &dev->dev; |
| |
| tmio->ccr = devm_ioremap(&dev->dev, ccr->start, resource_size(ccr)); |
| if (!tmio->ccr) |
| return -EIO; |
| |
| tmio->fcr_base = fcr->start & 0xfffff; |
| tmio->fcr = devm_ioremap(&dev->dev, fcr->start, resource_size(fcr)); |
| if (!tmio->fcr) |
| return -EIO; |
| |
| retval = tmio_hw_init(dev, tmio); |
| if (retval) |
| return retval; |
| |
| /* Set address of NAND IO lines */ |
| nand_chip->IO_ADDR_R = tmio->fcr; |
| nand_chip->IO_ADDR_W = tmio->fcr; |
| |
| /* Set address of hardware control function */ |
| nand_chip->cmd_ctrl = tmio_nand_hwcontrol; |
| nand_chip->dev_ready = tmio_nand_dev_ready; |
| nand_chip->read_byte = tmio_nand_read_byte; |
| nand_chip->write_buf = tmio_nand_write_buf; |
| nand_chip->read_buf = tmio_nand_read_buf; |
| |
| /* set eccmode using hardware ECC */ |
| nand_chip->ecc.mode = NAND_ECC_HW; |
| nand_chip->ecc.size = 512; |
| nand_chip->ecc.bytes = 6; |
| nand_chip->ecc.strength = 2; |
| nand_chip->ecc.hwctl = tmio_nand_enable_hwecc; |
| nand_chip->ecc.calculate = tmio_nand_calculate_ecc; |
| nand_chip->ecc.correct = tmio_nand_correct_data; |
| |
| if (data) |
| nand_chip->badblock_pattern = data->badblock_pattern; |
| |
| /* 15 us command delay time */ |
| nand_chip->chip_delay = 15; |
| |
| retval = devm_request_irq(&dev->dev, irq, &tmio_irq, 0, |
| dev_name(&dev->dev), tmio); |
| if (retval) { |
| dev_err(&dev->dev, "request_irq error %d\n", retval); |
| goto err_irq; |
| } |
| |
| tmio->irq = irq; |
| nand_chip->waitfunc = tmio_nand_wait; |
| |
| /* Scan to find existence of the device */ |
| retval = nand_scan(mtd, 1); |
| if (retval) |
| goto err_irq; |
| |
| /* Register the partitions */ |
| retval = mtd_device_parse_register(mtd, |
| data ? data->part_parsers : NULL, |
| NULL, |
| data ? data->partition : NULL, |
| data ? data->num_partitions : 0); |
| if (!retval) |
| return retval; |
| |
| nand_cleanup(nand_chip); |
| |
| err_irq: |
| tmio_hw_stop(dev, tmio); |
| return retval; |
| } |
| |
| static int tmio_remove(struct platform_device *dev) |
| { |
| struct tmio_nand *tmio = platform_get_drvdata(dev); |
| |
| nand_release(&tmio->chip); |
| tmio_hw_stop(dev, tmio); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int tmio_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| const struct mfd_cell *cell = mfd_get_cell(dev); |
| |
| if (cell->suspend) |
| cell->suspend(dev); |
| |
| tmio_hw_stop(dev, platform_get_drvdata(dev)); |
| return 0; |
| } |
| |
| static int tmio_resume(struct platform_device *dev) |
| { |
| const struct mfd_cell *cell = mfd_get_cell(dev); |
| |
| /* FIXME - is this required or merely another attack of the broken |
| * SHARP platform? Looks suspicious. |
| */ |
| tmio_hw_init(dev, platform_get_drvdata(dev)); |
| |
| if (cell->resume) |
| cell->resume(dev); |
| |
| return 0; |
| } |
| #else |
| #define tmio_suspend NULL |
| #define tmio_resume NULL |
| #endif |
| |
| static struct platform_driver tmio_driver = { |
| .driver.name = "tmio-nand", |
| .driver.owner = THIS_MODULE, |
| .probe = tmio_probe, |
| .remove = tmio_remove, |
| .suspend = tmio_suspend, |
| .resume = tmio_resume, |
| }; |
| |
| module_platform_driver(tmio_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov"); |
| MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller"); |
| MODULE_ALIAS("platform:tmio-nand"); |