| /* |
| * drivers/mtd/nand/orion_nand.c |
| * |
| * NAND support for Marvell Orion SoC platforms |
| * |
| * Tzachi Perelstein <tzachi@marvell.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/rawnand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <asm/sizes.h> |
| #include <linux/platform_data/mtd-orion_nand.h> |
| |
| struct orion_nand_info { |
| struct nand_chip chip; |
| struct clk *clk; |
| }; |
| |
| static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) |
| { |
| struct nand_chip *nc = mtd_to_nand(mtd); |
| struct orion_nand_data *board = nand_get_controller_data(nc); |
| u32 offs; |
| |
| if (cmd == NAND_CMD_NONE) |
| return; |
| |
| if (ctrl & NAND_CLE) |
| offs = (1 << board->cle); |
| else if (ctrl & NAND_ALE) |
| offs = (1 << board->ale); |
| else |
| return; |
| |
| if (nc->options & NAND_BUSWIDTH_16) |
| offs <<= 1; |
| |
| writeb(cmd, nc->IO_ADDR_W + offs); |
| } |
| |
| static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) |
| { |
| struct nand_chip *chip = mtd_to_nand(mtd); |
| void __iomem *io_base = chip->IO_ADDR_R; |
| #if __LINUX_ARM_ARCH__ >= 5 |
| uint64_t *buf64; |
| #endif |
| int i = 0; |
| |
| while (len && (unsigned long)buf & 7) { |
| *buf++ = readb(io_base); |
| len--; |
| } |
| #if __LINUX_ARM_ARCH__ >= 5 |
| buf64 = (uint64_t *)buf; |
| while (i < len/8) { |
| /* |
| * Since GCC has no proper constraint (PR 43518) |
| * force x variable to r2/r3 registers as ldrd instruction |
| * requires first register to be even. |
| */ |
| register uint64_t x asm ("r2"); |
| |
| asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base)); |
| buf64[i++] = x; |
| } |
| i *= 8; |
| #else |
| readsl(io_base, buf, len/4); |
| i = len / 4 * 4; |
| #endif |
| while (i < len) |
| buf[i++] = readb(io_base); |
| } |
| |
| static int __init orion_nand_probe(struct platform_device *pdev) |
| { |
| struct orion_nand_info *info; |
| struct mtd_info *mtd; |
| struct nand_chip *nc; |
| struct orion_nand_data *board; |
| struct resource *res; |
| void __iomem *io_base; |
| int ret = 0; |
| u32 val = 0; |
| |
| info = devm_kzalloc(&pdev->dev, |
| sizeof(struct orion_nand_info), |
| GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| nc = &info->chip; |
| mtd = nand_to_mtd(nc); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| io_base = devm_ioremap_resource(&pdev->dev, res); |
| |
| if (IS_ERR(io_base)) |
| return PTR_ERR(io_base); |
| |
| if (pdev->dev.of_node) { |
| board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data), |
| GFP_KERNEL); |
| if (!board) |
| return -ENOMEM; |
| if (!of_property_read_u32(pdev->dev.of_node, "cle", &val)) |
| board->cle = (u8)val; |
| else |
| board->cle = 0; |
| if (!of_property_read_u32(pdev->dev.of_node, "ale", &val)) |
| board->ale = (u8)val; |
| else |
| board->ale = 1; |
| if (!of_property_read_u32(pdev->dev.of_node, |
| "bank-width", &val)) |
| board->width = (u8)val * 8; |
| else |
| board->width = 8; |
| if (!of_property_read_u32(pdev->dev.of_node, |
| "chip-delay", &val)) |
| board->chip_delay = (u8)val; |
| } else { |
| board = dev_get_platdata(&pdev->dev); |
| } |
| |
| mtd->dev.parent = &pdev->dev; |
| |
| nand_set_controller_data(nc, board); |
| nand_set_flash_node(nc, pdev->dev.of_node); |
| nc->IO_ADDR_R = nc->IO_ADDR_W = io_base; |
| nc->cmd_ctrl = orion_nand_cmd_ctrl; |
| nc->read_buf = orion_nand_read_buf; |
| nc->ecc.mode = NAND_ECC_SOFT; |
| nc->ecc.algo = NAND_ECC_HAMMING; |
| |
| if (board->chip_delay) |
| nc->chip_delay = board->chip_delay; |
| |
| WARN(board->width > 16, |
| "%d bit bus width out of range", |
| board->width); |
| |
| if (board->width == 16) |
| nc->options |= NAND_BUSWIDTH_16; |
| |
| if (board->dev_ready) |
| nc->dev_ready = board->dev_ready; |
| |
| platform_set_drvdata(pdev, info); |
| |
| /* Not all platforms can gate the clock, so it is not |
| an error if the clock does not exists. */ |
| info->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(info->clk)) { |
| ret = PTR_ERR(info->clk); |
| if (ret == -ENOENT) { |
| info->clk = NULL; |
| } else { |
| dev_err(&pdev->dev, "failed to get clock!\n"); |
| return ret; |
| } |
| } |
| |
| ret = clk_prepare_enable(info->clk); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to prepare clock!\n"); |
| return ret; |
| } |
| |
| ret = nand_scan(mtd, 1); |
| if (ret) |
| goto no_dev; |
| |
| mtd->name = "orion_nand"; |
| ret = mtd_device_register(mtd, board->parts, board->nr_parts); |
| if (ret) { |
| nand_cleanup(nc); |
| goto no_dev; |
| } |
| |
| return 0; |
| |
| no_dev: |
| clk_disable_unprepare(info->clk); |
| return ret; |
| } |
| |
| static int orion_nand_remove(struct platform_device *pdev) |
| { |
| struct orion_nand_info *info = platform_get_drvdata(pdev); |
| struct nand_chip *chip = &info->chip; |
| |
| nand_release(chip); |
| |
| clk_disable_unprepare(info->clk); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id orion_nand_of_match_table[] = { |
| { .compatible = "marvell,orion-nand", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, orion_nand_of_match_table); |
| #endif |
| |
| static struct platform_driver orion_nand_driver = { |
| .remove = orion_nand_remove, |
| .driver = { |
| .name = "orion_nand", |
| .of_match_table = of_match_ptr(orion_nand_of_match_table), |
| }, |
| }; |
| |
| module_platform_driver_probe(orion_nand_driver, orion_nand_probe); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Tzachi Perelstein"); |
| MODULE_DESCRIPTION("NAND glue for Orion platforms"); |
| MODULE_ALIAS("platform:orion_nand"); |