| /* |
| * Copyright (C) 2015 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * This file contains the Broadcom Northstar Plus (NSP) GPIO driver that |
| * supports the chipCommonA GPIO controller. Basic PINCONF such as bias, |
| * pull up/down, slew and drive strength are also supported in this driver. |
| * |
| * Pins from the chipCommonA GPIO can be individually muxed to GPIO function, |
| * through the interaction with the NSP IOMUX controller. |
| */ |
| |
| #include <linux/gpio/driver.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/slab.h> |
| |
| #include "../pinctrl-utils.h" |
| |
| #define NSP_CHIP_A_INT_STATUS 0x00 |
| #define NSP_CHIP_A_INT_MASK 0x04 |
| #define NSP_GPIO_DATA_IN 0x40 |
| #define NSP_GPIO_DATA_OUT 0x44 |
| #define NSP_GPIO_OUT_EN 0x48 |
| #define NSP_GPIO_INT_POLARITY 0x50 |
| #define NSP_GPIO_INT_MASK 0x54 |
| #define NSP_GPIO_EVENT 0x58 |
| #define NSP_GPIO_EVENT_INT_MASK 0x5c |
| #define NSP_GPIO_EVENT_INT_POLARITY 0x64 |
| #define NSP_CHIP_A_GPIO_INT_BIT 0x01 |
| |
| /* I/O parameters offset for chipcommon A GPIO */ |
| #define NSP_GPIO_DRV_CTRL 0x00 |
| #define NSP_GPIO_HYSTERESIS_EN 0x10 |
| #define NSP_GPIO_SLEW_RATE_EN 0x14 |
| #define NSP_PULL_UP_EN 0x18 |
| #define NSP_PULL_DOWN_EN 0x1c |
| #define GPIO_DRV_STRENGTH_BITS 0x03 |
| |
| /* |
| * nsp GPIO core |
| * |
| * @dev: pointer to device |
| * @base: I/O register base for nsp GPIO controller |
| * @io_ctrl: I/O register base for PINCONF support outside the GPIO block |
| * @gc: GPIO chip |
| * @pctl: pointer to pinctrl_dev |
| * @pctldesc: pinctrl descriptor |
| * @irq_domain: pointer to irq domain |
| * @lock: lock to protect access to I/O registers |
| */ |
| struct nsp_gpio { |
| struct device *dev; |
| void __iomem *base; |
| void __iomem *io_ctrl; |
| struct gpio_chip gc; |
| struct pinctrl_dev *pctl; |
| struct pinctrl_desc pctldesc; |
| struct irq_domain *irq_domain; |
| spinlock_t lock; |
| }; |
| |
| enum base_type { |
| REG, |
| IO_CTRL |
| }; |
| |
| /* |
| * Mapping from PINCONF pins to GPIO pins is 1-to-1 |
| */ |
| static inline unsigned nsp_pin_to_gpio(unsigned pin) |
| { |
| return pin; |
| } |
| |
| /* |
| * nsp_set_bit - set or clear one bit (corresponding to the GPIO pin) in a |
| * nsp GPIO register |
| * |
| * @nsp_gpio: nsp GPIO device |
| * @base_type: reg base to modify |
| * @reg: register offset |
| * @gpio: GPIO pin |
| * @set: set or clear |
| */ |
| static inline void nsp_set_bit(struct nsp_gpio *chip, enum base_type address, |
| unsigned int reg, unsigned gpio, bool set) |
| { |
| u32 val; |
| void __iomem *base_address; |
| |
| if (address == IO_CTRL) |
| base_address = chip->io_ctrl; |
| else |
| base_address = chip->base; |
| |
| val = readl(base_address + reg); |
| if (set) |
| val |= BIT(gpio); |
| else |
| val &= ~BIT(gpio); |
| |
| writel(val, base_address + reg); |
| } |
| |
| /* |
| * nsp_get_bit - get one bit (corresponding to the GPIO pin) in a |
| * nsp GPIO register |
| */ |
| static inline bool nsp_get_bit(struct nsp_gpio *chip, enum base_type address, |
| unsigned int reg, unsigned gpio) |
| { |
| if (address == IO_CTRL) |
| return !!(readl(chip->io_ctrl + reg) & BIT(gpio)); |
| else |
| return !!(readl(chip->base + reg) & BIT(gpio)); |
| } |
| |
| static irqreturn_t nsp_gpio_irq_handler(int irq, void *data) |
| { |
| struct nsp_gpio *chip = (struct nsp_gpio *)data; |
| struct gpio_chip gc = chip->gc; |
| int bit; |
| unsigned long int_bits = 0; |
| u32 int_status; |
| |
| /* go through the entire GPIOs and handle all interrupts */ |
| int_status = readl(chip->base + NSP_CHIP_A_INT_STATUS); |
| if (int_status & NSP_CHIP_A_GPIO_INT_BIT) { |
| unsigned int event, level; |
| |
| /* Get level and edge interrupts */ |
| event = readl(chip->base + NSP_GPIO_EVENT_INT_MASK) & |
| readl(chip->base + NSP_GPIO_EVENT); |
| level = readl(chip->base + NSP_GPIO_DATA_IN) ^ |
| readl(chip->base + NSP_GPIO_INT_POLARITY); |
| level &= readl(chip->base + NSP_GPIO_INT_MASK); |
| int_bits = level | event; |
| |
| for_each_set_bit(bit, &int_bits, gc.ngpio) { |
| /* |
| * Clear the interrupt before invoking the |
| * handler, so we do not leave any window |
| */ |
| writel(BIT(bit), chip->base + NSP_GPIO_EVENT); |
| generic_handle_irq( |
| irq_linear_revmap(chip->irq_domain, bit)); |
| } |
| } |
| |
| return int_bits ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| static void nsp_gpio_irq_ack(struct irq_data *d) |
| { |
| struct nsp_gpio *chip = irq_data_get_irq_chip_data(d); |
| unsigned gpio = d->hwirq; |
| u32 val = BIT(gpio); |
| u32 trigger_type; |
| |
| trigger_type = irq_get_trigger_type(d->irq); |
| if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) |
| nsp_set_bit(chip, REG, NSP_GPIO_EVENT, gpio, val); |
| } |
| |
| /* |
| * nsp_gpio_irq_set_mask - mask/unmask a GPIO interrupt |
| * |
| * @d: IRQ chip data |
| * @unmask: mask/unmask GPIO interrupt |
| */ |
| static void nsp_gpio_irq_set_mask(struct irq_data *d, bool unmask) |
| { |
| struct nsp_gpio *chip = irq_data_get_irq_chip_data(d); |
| unsigned gpio = d->hwirq; |
| u32 trigger_type; |
| |
| trigger_type = irq_get_trigger_type(d->irq); |
| if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) |
| nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_MASK, gpio, unmask); |
| else |
| nsp_set_bit(chip, REG, NSP_GPIO_INT_MASK, gpio, unmask); |
| } |
| |
| static void nsp_gpio_irq_mask(struct irq_data *d) |
| { |
| struct nsp_gpio *chip = irq_data_get_irq_chip_data(d); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| nsp_gpio_irq_set_mask(d, false); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| } |
| |
| static void nsp_gpio_irq_unmask(struct irq_data *d) |
| { |
| struct nsp_gpio *chip = irq_data_get_irq_chip_data(d); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| nsp_gpio_irq_set_mask(d, true); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| } |
| |
| static int nsp_gpio_irq_set_type(struct irq_data *d, unsigned int type) |
| { |
| struct nsp_gpio *chip = irq_data_get_irq_chip_data(d); |
| unsigned gpio = d->hwirq; |
| bool level_low; |
| bool falling; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| falling = nsp_get_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio); |
| level_low = nsp_get_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio); |
| |
| switch (type & IRQ_TYPE_SENSE_MASK) { |
| case IRQ_TYPE_EDGE_RISING: |
| falling = false; |
| break; |
| |
| case IRQ_TYPE_EDGE_FALLING: |
| falling = true; |
| break; |
| |
| case IRQ_TYPE_LEVEL_HIGH: |
| level_low = false; |
| break; |
| |
| case IRQ_TYPE_LEVEL_LOW: |
| level_low = true; |
| break; |
| |
| default: |
| dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n", |
| type); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| return -EINVAL; |
| } |
| |
| nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio, falling); |
| nsp_set_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio, level_low); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| dev_dbg(chip->dev, "gpio:%u level_low:%s falling:%s\n", gpio, |
| level_low ? "true" : "false", falling ? "true" : "false"); |
| return 0; |
| } |
| |
| static struct irq_chip nsp_gpio_irq_chip = { |
| .name = "gpio-a", |
| .irq_enable = nsp_gpio_irq_unmask, |
| .irq_disable = nsp_gpio_irq_mask, |
| .irq_ack = nsp_gpio_irq_ack, |
| .irq_mask = nsp_gpio_irq_mask, |
| .irq_unmask = nsp_gpio_irq_unmask, |
| .irq_set_type = nsp_gpio_irq_set_type, |
| }; |
| |
| /* |
| * Request the nsp IOMUX pinmux controller to mux individual pins to GPIO |
| */ |
| static int nsp_gpio_request(struct gpio_chip *gc, unsigned offset) |
| { |
| unsigned gpio = gc->base + offset; |
| |
| return pinctrl_request_gpio(gpio); |
| } |
| |
| static void nsp_gpio_free(struct gpio_chip *gc, unsigned offset) |
| { |
| unsigned gpio = gc->base + offset; |
| |
| pinctrl_free_gpio(gpio); |
| } |
| |
| static int nsp_gpio_direction_input(struct gpio_chip *gc, unsigned gpio) |
| { |
| struct nsp_gpio *chip = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, false); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| dev_dbg(chip->dev, "gpio:%u set input\n", gpio); |
| return 0; |
| } |
| |
| static int nsp_gpio_direction_output(struct gpio_chip *gc, unsigned gpio, |
| int val) |
| { |
| struct nsp_gpio *chip = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, true); |
| nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val)); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val); |
| return 0; |
| } |
| |
| static void nsp_gpio_set(struct gpio_chip *gc, unsigned gpio, int val) |
| { |
| struct nsp_gpio *chip = gpiochip_get_data(gc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val)); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val); |
| } |
| |
| static int nsp_gpio_get(struct gpio_chip *gc, unsigned gpio) |
| { |
| struct nsp_gpio *chip = gpiochip_get_data(gc); |
| |
| return !!(readl(chip->base + NSP_GPIO_DATA_IN) & BIT(gpio)); |
| } |
| |
| static int nsp_gpio_to_irq(struct gpio_chip *gc, unsigned offset) |
| { |
| struct nsp_gpio *chip = gpiochip_get_data(gc); |
| |
| return irq_linear_revmap(chip->irq_domain, offset); |
| } |
| |
| static int nsp_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| return 1; |
| } |
| |
| /* |
| * Only one group: "gpio_grp", since this local pinctrl device only performs |
| * GPIO specific PINCONF configurations |
| */ |
| static const char *nsp_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned selector) |
| { |
| return "gpio_grp"; |
| } |
| |
| static const struct pinctrl_ops nsp_pctrl_ops = { |
| .get_groups_count = nsp_get_groups_count, |
| .get_group_name = nsp_get_group_name, |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, |
| .dt_free_map = pinctrl_utils_dt_free_map, |
| }; |
| |
| static int nsp_gpio_set_slew(struct nsp_gpio *chip, unsigned gpio, u16 slew) |
| { |
| if (slew) |
| nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, true); |
| else |
| nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, false); |
| |
| return 0; |
| } |
| |
| static int nsp_gpio_set_pull(struct nsp_gpio *chip, unsigned gpio, |
| bool pull_up, bool pull_down) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| nsp_set_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio, pull_down); |
| nsp_set_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio, pull_up); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| dev_dbg(chip->dev, "gpio:%u set pullup:%d pulldown: %d\n", |
| gpio, pull_up, pull_down); |
| return 0; |
| } |
| |
| static void nsp_gpio_get_pull(struct nsp_gpio *chip, unsigned gpio, |
| bool *pull_up, bool *pull_down) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| *pull_up = nsp_get_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio); |
| *pull_down = nsp_get_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio); |
| spin_unlock_irqrestore(&chip->lock, flags); |
| } |
| |
| static int nsp_gpio_set_strength(struct nsp_gpio *chip, unsigned gpio, |
| u16 strength) |
| { |
| u32 offset, shift, i; |
| u32 val; |
| unsigned long flags; |
| |
| /* make sure drive strength is supported */ |
| if (strength < 2 || strength > 16 || (strength % 2)) |
| return -ENOTSUPP; |
| |
| shift = gpio; |
| offset = NSP_GPIO_DRV_CTRL; |
| dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio, |
| strength); |
| spin_lock_irqsave(&chip->lock, flags); |
| strength = (strength / 2) - 1; |
| for (i = GPIO_DRV_STRENGTH_BITS; i > 0; i--) { |
| val = readl(chip->io_ctrl + offset); |
| val &= ~BIT(shift); |
| val |= ((strength >> (i-1)) & 0x1) << shift; |
| writel(val, chip->io_ctrl + offset); |
| offset += 4; |
| } |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| return 0; |
| } |
| |
| static int nsp_gpio_get_strength(struct nsp_gpio *chip, unsigned gpio, |
| u16 *strength) |
| { |
| unsigned int offset, shift; |
| u32 val; |
| unsigned long flags; |
| int i; |
| |
| offset = NSP_GPIO_DRV_CTRL; |
| shift = gpio; |
| |
| spin_lock_irqsave(&chip->lock, flags); |
| *strength = 0; |
| for (i = (GPIO_DRV_STRENGTH_BITS - 1); i >= 0; i--) { |
| val = readl(chip->io_ctrl + offset) & BIT(shift); |
| val >>= shift; |
| *strength += (val << i); |
| offset += 4; |
| } |
| |
| /* convert to mA */ |
| *strength = (*strength + 1) * 2; |
| spin_unlock_irqrestore(&chip->lock, flags); |
| |
| return 0; |
| } |
| |
| int nsp_pin_config_group_get(struct pinctrl_dev *pctldev, unsigned selector, |
| unsigned long *config) |
| { |
| return 0; |
| } |
| |
| int nsp_pin_config_group_set(struct pinctrl_dev *pctldev, unsigned selector, |
| unsigned long *configs, unsigned num_configs) |
| { |
| return 0; |
| } |
| |
| static int nsp_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, |
| unsigned long *config) |
| { |
| struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| unsigned int gpio; |
| u16 arg = 0; |
| bool pull_up, pull_down; |
| int ret; |
| |
| gpio = nsp_pin_to_gpio(pin); |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down); |
| if ((pull_up == false) && (pull_down == false)) |
| return 0; |
| else |
| return -EINVAL; |
| |
| case PIN_CONFIG_BIAS_PULL_UP: |
| nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down); |
| if (pull_up) |
| return 0; |
| else |
| return -EINVAL; |
| |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down); |
| if (pull_down) |
| return 0; |
| else |
| return -EINVAL; |
| |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| ret = nsp_gpio_get_strength(chip, gpio, &arg); |
| if (ret) |
| return ret; |
| *config = pinconf_to_config_packed(param, arg); |
| return 0; |
| |
| default: |
| return -ENOTSUPP; |
| } |
| } |
| |
| static int nsp_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, |
| unsigned long *configs, unsigned num_configs) |
| { |
| struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param; |
| u16 arg; |
| unsigned int i, gpio; |
| int ret = -ENOTSUPP; |
| |
| gpio = nsp_pin_to_gpio(pin); |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| ret = nsp_gpio_set_pull(chip, gpio, false, false); |
| if (ret < 0) |
| goto out; |
| break; |
| |
| case PIN_CONFIG_BIAS_PULL_UP: |
| ret = nsp_gpio_set_pull(chip, gpio, true, false); |
| if (ret < 0) |
| goto out; |
| break; |
| |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| ret = nsp_gpio_set_pull(chip, gpio, false, true); |
| if (ret < 0) |
| goto out; |
| break; |
| |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| ret = nsp_gpio_set_strength(chip, gpio, arg); |
| if (ret < 0) |
| goto out; |
| break; |
| |
| case PIN_CONFIG_SLEW_RATE: |
| ret = nsp_gpio_set_slew(chip, gpio, arg); |
| if (ret < 0) |
| goto out; |
| break; |
| |
| default: |
| dev_err(chip->dev, "invalid configuration\n"); |
| return -ENOTSUPP; |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static const struct pinconf_ops nsp_pconf_ops = { |
| .is_generic = true, |
| .pin_config_get = nsp_pin_config_get, |
| .pin_config_set = nsp_pin_config_set, |
| .pin_config_group_get = nsp_pin_config_group_get, |
| .pin_config_group_set = nsp_pin_config_group_set, |
| }; |
| |
| /* |
| * NSP GPIO controller supports some PINCONF related configurations such as |
| * pull up, pull down, slew and drive strength, when the pin is configured |
| * to GPIO. |
| * |
| * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the |
| * local GPIO pins |
| */ |
| static int nsp_gpio_register_pinconf(struct nsp_gpio *chip) |
| { |
| struct pinctrl_desc *pctldesc = &chip->pctldesc; |
| struct pinctrl_pin_desc *pins; |
| struct gpio_chip *gc = &chip->gc; |
| int i; |
| |
| pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL); |
| if (!pins) |
| return -ENOMEM; |
| for (i = 0; i < gc->ngpio; i++) { |
| pins[i].number = i; |
| pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL, |
| "gpio-%d", i); |
| if (!pins[i].name) |
| return -ENOMEM; |
| } |
| pctldesc->name = dev_name(chip->dev); |
| pctldesc->pctlops = &nsp_pctrl_ops; |
| pctldesc->pins = pins; |
| pctldesc->npins = gc->ngpio; |
| pctldesc->confops = &nsp_pconf_ops; |
| |
| chip->pctl = pinctrl_register(pctldesc, chip->dev, chip); |
| if (IS_ERR(chip->pctl)) { |
| dev_err(chip->dev, "unable to register pinctrl device\n"); |
| return PTR_ERR(chip->pctl); |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id nsp_gpio_of_match[] = { |
| {.compatible = "brcm,nsp-gpio-a",}, |
| {} |
| }; |
| |
| static int nsp_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct nsp_gpio *chip; |
| struct gpio_chip *gc; |
| u32 val, count; |
| int irq, ret; |
| |
| if (of_property_read_u32(pdev->dev.of_node, "ngpios", &val)) { |
| dev_err(&pdev->dev, "Missing ngpios OF property\n"); |
| return -ENODEV; |
| } |
| |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->dev = dev; |
| platform_set_drvdata(pdev, chip); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| chip->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(chip->base)) { |
| dev_err(dev, "unable to map I/O memory\n"); |
| return PTR_ERR(chip->base); |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| chip->io_ctrl = devm_ioremap_resource(dev, res); |
| if (IS_ERR(chip->io_ctrl)) { |
| dev_err(dev, "unable to map I/O memory\n"); |
| return PTR_ERR(chip->io_ctrl); |
| } |
| |
| spin_lock_init(&chip->lock); |
| gc = &chip->gc; |
| gc->base = -1; |
| gc->can_sleep = false; |
| gc->ngpio = val; |
| gc->label = dev_name(dev); |
| gc->parent = dev; |
| gc->of_node = dev->of_node; |
| gc->request = nsp_gpio_request; |
| gc->free = nsp_gpio_free; |
| gc->direction_input = nsp_gpio_direction_input; |
| gc->direction_output = nsp_gpio_direction_output; |
| gc->set = nsp_gpio_set; |
| gc->get = nsp_gpio_get; |
| gc->to_irq = nsp_gpio_to_irq; |
| |
| /* optional GPIO interrupt support */ |
| irq = platform_get_irq(pdev, 0); |
| if (irq > 0) { |
| /* Create irq domain so that each pin can be assigned an IRQ.*/ |
| chip->irq_domain = irq_domain_add_linear(gc->of_node, gc->ngpio, |
| &irq_domain_simple_ops, |
| chip); |
| if (!chip->irq_domain) { |
| dev_err(&pdev->dev, "Couldn't allocate IRQ domain\n"); |
| return -ENXIO; |
| } |
| |
| /* Map each gpio to an IRQ and set the handler for gpiolib. */ |
| for (count = 0; count < gc->ngpio; count++) { |
| int irq = irq_create_mapping(chip->irq_domain, count); |
| |
| irq_set_chip_and_handler(irq, &nsp_gpio_irq_chip, |
| handle_simple_irq); |
| irq_set_chip_data(irq, chip); |
| } |
| |
| /* Install ISR for this GPIO controller. */ |
| ret = devm_request_irq(&pdev->dev, irq, nsp_gpio_irq_handler, |
| IRQF_SHARED, "gpio-a", chip); |
| if (ret) { |
| dev_err(&pdev->dev, "Unable to request IRQ%d: %d\n", |
| irq, ret); |
| goto err_rm_gpiochip; |
| } |
| |
| val = readl(chip->base + NSP_CHIP_A_INT_MASK); |
| val = val | NSP_CHIP_A_GPIO_INT_BIT; |
| writel(val, (chip->base + NSP_CHIP_A_INT_MASK)); |
| } |
| |
| ret = gpiochip_add_data(gc, chip); |
| if (ret < 0) { |
| dev_err(dev, "unable to add GPIO chip\n"); |
| return ret; |
| } |
| |
| ret = nsp_gpio_register_pinconf(chip); |
| if (ret) { |
| dev_err(dev, "unable to register pinconf\n"); |
| goto err_rm_gpiochip; |
| } |
| |
| return 0; |
| |
| err_rm_gpiochip: |
| gpiochip_remove(gc); |
| |
| return ret; |
| } |
| |
| static struct platform_driver nsp_gpio_driver = { |
| .driver = { |
| .name = "nsp-gpio-a", |
| .of_match_table = nsp_gpio_of_match, |
| }, |
| .probe = nsp_gpio_probe, |
| }; |
| |
| static int __init nsp_gpio_init(void) |
| { |
| return platform_driver_probe(&nsp_gpio_driver, nsp_gpio_probe); |
| } |
| arch_initcall_sync(nsp_gpio_init); |