| /* |
| * Copyright (C) 2015 Mans Rullgard <mans@mansr.com> |
| * |
| * Mostly rewritten, based on driver from Sigma Designs. Original |
| * copyright notice below. |
| * |
| * |
| * Driver for tangox SMP864x/SMP865x/SMP867x/SMP868x builtin Ethernet Mac. |
| * |
| * Copyright (C) 2005 Maxime Bizon <mbizon@freebox.fr> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/etherdevice.h> |
| #include <linux/delay.h> |
| #include <linux/ethtool.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_device.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/phy.h> |
| #include <linux/cache.h> |
| #include <linux/jiffies.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <asm/barrier.h> |
| |
| #include "nb8800.h" |
| |
| static void nb8800_tx_done(struct net_device *dev); |
| static int nb8800_dma_stop(struct net_device *dev); |
| |
| static inline u8 nb8800_readb(struct nb8800_priv *priv, int reg) |
| { |
| return readb_relaxed(priv->base + reg); |
| } |
| |
| static inline u32 nb8800_readl(struct nb8800_priv *priv, int reg) |
| { |
| return readl_relaxed(priv->base + reg); |
| } |
| |
| static inline void nb8800_writeb(struct nb8800_priv *priv, int reg, u8 val) |
| { |
| writeb_relaxed(val, priv->base + reg); |
| } |
| |
| static inline void nb8800_writew(struct nb8800_priv *priv, int reg, u16 val) |
| { |
| writew_relaxed(val, priv->base + reg); |
| } |
| |
| static inline void nb8800_writel(struct nb8800_priv *priv, int reg, u32 val) |
| { |
| writel_relaxed(val, priv->base + reg); |
| } |
| |
| static inline void nb8800_maskb(struct nb8800_priv *priv, int reg, |
| u32 mask, u32 val) |
| { |
| u32 old = nb8800_readb(priv, reg); |
| u32 new = (old & ~mask) | (val & mask); |
| |
| if (new != old) |
| nb8800_writeb(priv, reg, new); |
| } |
| |
| static inline void nb8800_maskl(struct nb8800_priv *priv, int reg, |
| u32 mask, u32 val) |
| { |
| u32 old = nb8800_readl(priv, reg); |
| u32 new = (old & ~mask) | (val & mask); |
| |
| if (new != old) |
| nb8800_writel(priv, reg, new); |
| } |
| |
| static inline void nb8800_modb(struct nb8800_priv *priv, int reg, u8 bits, |
| bool set) |
| { |
| nb8800_maskb(priv, reg, bits, set ? bits : 0); |
| } |
| |
| static inline void nb8800_setb(struct nb8800_priv *priv, int reg, u8 bits) |
| { |
| nb8800_maskb(priv, reg, bits, bits); |
| } |
| |
| static inline void nb8800_clearb(struct nb8800_priv *priv, int reg, u8 bits) |
| { |
| nb8800_maskb(priv, reg, bits, 0); |
| } |
| |
| static inline void nb8800_modl(struct nb8800_priv *priv, int reg, u32 bits, |
| bool set) |
| { |
| nb8800_maskl(priv, reg, bits, set ? bits : 0); |
| } |
| |
| static inline void nb8800_setl(struct nb8800_priv *priv, int reg, u32 bits) |
| { |
| nb8800_maskl(priv, reg, bits, bits); |
| } |
| |
| static inline void nb8800_clearl(struct nb8800_priv *priv, int reg, u32 bits) |
| { |
| nb8800_maskl(priv, reg, bits, 0); |
| } |
| |
| static int nb8800_mdio_wait(struct mii_bus *bus) |
| { |
| struct nb8800_priv *priv = bus->priv; |
| u32 val; |
| |
| return readl_poll_timeout_atomic(priv->base + NB8800_MDIO_CMD, |
| val, !(val & MDIO_CMD_GO), 1, 1000); |
| } |
| |
| static int nb8800_mdio_cmd(struct mii_bus *bus, u32 cmd) |
| { |
| struct nb8800_priv *priv = bus->priv; |
| int err; |
| |
| err = nb8800_mdio_wait(bus); |
| if (err) |
| return err; |
| |
| nb8800_writel(priv, NB8800_MDIO_CMD, cmd); |
| udelay(10); |
| nb8800_writel(priv, NB8800_MDIO_CMD, cmd | MDIO_CMD_GO); |
| |
| return nb8800_mdio_wait(bus); |
| } |
| |
| static int nb8800_mdio_read(struct mii_bus *bus, int phy_id, int reg) |
| { |
| struct nb8800_priv *priv = bus->priv; |
| u32 val; |
| int err; |
| |
| err = nb8800_mdio_cmd(bus, MDIO_CMD_ADDR(phy_id) | MDIO_CMD_REG(reg)); |
| if (err) |
| return err; |
| |
| val = nb8800_readl(priv, NB8800_MDIO_STS); |
| if (val & MDIO_STS_ERR) |
| return 0xffff; |
| |
| return val & 0xffff; |
| } |
| |
| static int nb8800_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val) |
| { |
| u32 cmd = MDIO_CMD_ADDR(phy_id) | MDIO_CMD_REG(reg) | |
| MDIO_CMD_DATA(val) | MDIO_CMD_WR; |
| |
| return nb8800_mdio_cmd(bus, cmd); |
| } |
| |
| static void nb8800_mac_tx(struct net_device *dev, bool enable) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| |
| while (nb8800_readl(priv, NB8800_TXC_CR) & TCR_EN) |
| cpu_relax(); |
| |
| nb8800_modb(priv, NB8800_TX_CTL1, TX_EN, enable); |
| } |
| |
| static void nb8800_mac_rx(struct net_device *dev, bool enable) |
| { |
| nb8800_modb(netdev_priv(dev), NB8800_RX_CTL, RX_EN, enable); |
| } |
| |
| static void nb8800_mac_af(struct net_device *dev, bool enable) |
| { |
| nb8800_modb(netdev_priv(dev), NB8800_RX_CTL, RX_AF_EN, enable); |
| } |
| |
| static void nb8800_start_rx(struct net_device *dev) |
| { |
| nb8800_setl(netdev_priv(dev), NB8800_RXC_CR, RCR_EN); |
| } |
| |
| static int nb8800_alloc_rx(struct net_device *dev, unsigned int i, bool napi) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct nb8800_rx_desc *rxd = &priv->rx_descs[i]; |
| struct nb8800_rx_buf *rxb = &priv->rx_bufs[i]; |
| int size = L1_CACHE_ALIGN(RX_BUF_SIZE); |
| dma_addr_t dma_addr; |
| struct page *page; |
| unsigned long offset; |
| void *data; |
| |
| data = napi ? napi_alloc_frag(size) : netdev_alloc_frag(size); |
| if (!data) |
| return -ENOMEM; |
| |
| page = virt_to_head_page(data); |
| offset = data - page_address(page); |
| |
| dma_addr = dma_map_page(&dev->dev, page, offset, RX_BUF_SIZE, |
| DMA_FROM_DEVICE); |
| |
| if (dma_mapping_error(&dev->dev, dma_addr)) { |
| skb_free_frag(data); |
| return -ENOMEM; |
| } |
| |
| rxb->page = page; |
| rxb->offset = offset; |
| rxd->desc.s_addr = dma_addr; |
| |
| return 0; |
| } |
| |
| static void nb8800_receive(struct net_device *dev, unsigned int i, |
| unsigned int len) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct nb8800_rx_desc *rxd = &priv->rx_descs[i]; |
| struct page *page = priv->rx_bufs[i].page; |
| int offset = priv->rx_bufs[i].offset; |
| void *data = page_address(page) + offset; |
| dma_addr_t dma = rxd->desc.s_addr; |
| struct sk_buff *skb; |
| unsigned int size; |
| int err; |
| |
| size = len <= RX_COPYBREAK ? len : RX_COPYHDR; |
| |
| skb = napi_alloc_skb(&priv->napi, size); |
| if (!skb) { |
| netdev_err(dev, "rx skb allocation failed\n"); |
| dev->stats.rx_dropped++; |
| return; |
| } |
| |
| if (len <= RX_COPYBREAK) { |
| dma_sync_single_for_cpu(&dev->dev, dma, len, DMA_FROM_DEVICE); |
| memcpy(skb_put(skb, len), data, len); |
| dma_sync_single_for_device(&dev->dev, dma, len, |
| DMA_FROM_DEVICE); |
| } else { |
| err = nb8800_alloc_rx(dev, i, true); |
| if (err) { |
| netdev_err(dev, "rx buffer allocation failed\n"); |
| dev->stats.rx_dropped++; |
| return; |
| } |
| |
| dma_unmap_page(&dev->dev, dma, RX_BUF_SIZE, DMA_FROM_DEVICE); |
| memcpy(skb_put(skb, RX_COPYHDR), data, RX_COPYHDR); |
| skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, |
| offset + RX_COPYHDR, len - RX_COPYHDR, |
| RX_BUF_SIZE); |
| } |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| napi_gro_receive(&priv->napi, skb); |
| } |
| |
| static void nb8800_rx_error(struct net_device *dev, u32 report) |
| { |
| if (report & RX_LENGTH_ERR) |
| dev->stats.rx_length_errors++; |
| |
| if (report & RX_FCS_ERR) |
| dev->stats.rx_crc_errors++; |
| |
| if (report & RX_FIFO_OVERRUN) |
| dev->stats.rx_fifo_errors++; |
| |
| if (report & RX_ALIGNMENT_ERROR) |
| dev->stats.rx_frame_errors++; |
| |
| dev->stats.rx_errors++; |
| } |
| |
| static int nb8800_poll(struct napi_struct *napi, int budget) |
| { |
| struct net_device *dev = napi->dev; |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct nb8800_rx_desc *rxd; |
| unsigned int last = priv->rx_eoc; |
| unsigned int next; |
| int work = 0; |
| |
| nb8800_tx_done(dev); |
| |
| again: |
| do { |
| struct nb8800_rx_buf *rxb; |
| unsigned int len; |
| |
| next = (last + 1) % RX_DESC_COUNT; |
| |
| rxb = &priv->rx_bufs[next]; |
| rxd = &priv->rx_descs[next]; |
| |
| if (!rxd->report) |
| break; |
| |
| len = RX_BYTES_TRANSFERRED(rxd->report); |
| |
| if (IS_RX_ERROR(rxd->report)) |
| nb8800_rx_error(dev, rxd->report); |
| else |
| nb8800_receive(dev, next, len); |
| |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += len; |
| |
| if (rxd->report & RX_MULTICAST_PKT) |
| dev->stats.multicast++; |
| |
| rxd->report = 0; |
| last = next; |
| work++; |
| } while (work < budget); |
| |
| if (work) { |
| priv->rx_descs[last].desc.config |= DESC_EOC; |
| wmb(); /* ensure new EOC is written before clearing old */ |
| priv->rx_descs[priv->rx_eoc].desc.config &= ~DESC_EOC; |
| priv->rx_eoc = last; |
| nb8800_start_rx(dev); |
| } |
| |
| if (work < budget) { |
| nb8800_writel(priv, NB8800_RX_ITR, priv->rx_itr_irq); |
| |
| /* If a packet arrived after we last checked but |
| * before writing RX_ITR, the interrupt will be |
| * delayed, so we retrieve it now. |
| */ |
| if (priv->rx_descs[next].report) |
| goto again; |
| |
| napi_complete_done(napi, work); |
| } |
| |
| return work; |
| } |
| |
| static void __nb8800_tx_dma_start(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct nb8800_tx_buf *txb; |
| u32 txc_cr; |
| |
| txb = &priv->tx_bufs[priv->tx_queue]; |
| if (!txb->ready) |
| return; |
| |
| txc_cr = nb8800_readl(priv, NB8800_TXC_CR); |
| if (txc_cr & TCR_EN) |
| return; |
| |
| nb8800_writel(priv, NB8800_TX_DESC_ADDR, txb->dma_desc); |
| wmb(); /* ensure desc addr is written before starting DMA */ |
| nb8800_writel(priv, NB8800_TXC_CR, txc_cr | TCR_EN); |
| |
| priv->tx_queue = (priv->tx_queue + txb->chain_len) % TX_DESC_COUNT; |
| } |
| |
| static void nb8800_tx_dma_start(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| |
| spin_lock_irq(&priv->tx_lock); |
| __nb8800_tx_dma_start(dev); |
| spin_unlock_irq(&priv->tx_lock); |
| } |
| |
| static void nb8800_tx_dma_start_irq(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| |
| spin_lock(&priv->tx_lock); |
| __nb8800_tx_dma_start(dev); |
| spin_unlock(&priv->tx_lock); |
| } |
| |
| static int nb8800_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct nb8800_tx_desc *txd; |
| struct nb8800_tx_buf *txb; |
| struct nb8800_dma_desc *desc; |
| dma_addr_t dma_addr; |
| unsigned int dma_len; |
| unsigned int align; |
| unsigned int next; |
| |
| if (atomic_read(&priv->tx_free) <= NB8800_DESC_LOW) { |
| netif_stop_queue(dev); |
| return NETDEV_TX_BUSY; |
| } |
| |
| align = (8 - (uintptr_t)skb->data) & 7; |
| |
| dma_len = skb->len - align; |
| dma_addr = dma_map_single(&dev->dev, skb->data + align, |
| dma_len, DMA_TO_DEVICE); |
| |
| if (dma_mapping_error(&dev->dev, dma_addr)) { |
| netdev_err(dev, "tx dma mapping error\n"); |
| kfree_skb(skb); |
| dev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| if (atomic_dec_return(&priv->tx_free) <= NB8800_DESC_LOW) { |
| netif_stop_queue(dev); |
| skb->xmit_more = 0; |
| } |
| |
| next = priv->tx_next; |
| txb = &priv->tx_bufs[next]; |
| txd = &priv->tx_descs[next]; |
| desc = &txd->desc[0]; |
| |
| next = (next + 1) % TX_DESC_COUNT; |
| |
| if (align) { |
| memcpy(txd->buf, skb->data, align); |
| |
| desc->s_addr = |
| txb->dma_desc + offsetof(struct nb8800_tx_desc, buf); |
| desc->n_addr = txb->dma_desc + sizeof(txd->desc[0]); |
| desc->config = DESC_BTS(2) | DESC_DS | align; |
| |
| desc++; |
| } |
| |
| desc->s_addr = dma_addr; |
| desc->n_addr = priv->tx_bufs[next].dma_desc; |
| desc->config = DESC_BTS(2) | DESC_DS | DESC_EOF | dma_len; |
| |
| if (!skb->xmit_more) |
| desc->config |= DESC_EOC; |
| |
| txb->skb = skb; |
| txb->dma_addr = dma_addr; |
| txb->dma_len = dma_len; |
| |
| if (!priv->tx_chain) { |
| txb->chain_len = 1; |
| priv->tx_chain = txb; |
| } else { |
| priv->tx_chain->chain_len++; |
| } |
| |
| netdev_sent_queue(dev, skb->len); |
| |
| priv->tx_next = next; |
| |
| if (!skb->xmit_more) { |
| smp_wmb(); |
| priv->tx_chain->ready = true; |
| priv->tx_chain = NULL; |
| nb8800_tx_dma_start(dev); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void nb8800_tx_error(struct net_device *dev, u32 report) |
| { |
| if (report & TX_LATE_COLLISION) |
| dev->stats.collisions++; |
| |
| if (report & TX_PACKET_DROPPED) |
| dev->stats.tx_dropped++; |
| |
| if (report & TX_FIFO_UNDERRUN) |
| dev->stats.tx_fifo_errors++; |
| |
| dev->stats.tx_errors++; |
| } |
| |
| static void nb8800_tx_done(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| unsigned int limit = priv->tx_next; |
| unsigned int done = priv->tx_done; |
| unsigned int packets = 0; |
| unsigned int len = 0; |
| |
| while (done != limit) { |
| struct nb8800_tx_desc *txd = &priv->tx_descs[done]; |
| struct nb8800_tx_buf *txb = &priv->tx_bufs[done]; |
| struct sk_buff *skb; |
| |
| if (!txd->report) |
| break; |
| |
| skb = txb->skb; |
| len += skb->len; |
| |
| dma_unmap_single(&dev->dev, txb->dma_addr, txb->dma_len, |
| DMA_TO_DEVICE); |
| |
| if (IS_TX_ERROR(txd->report)) { |
| nb8800_tx_error(dev, txd->report); |
| kfree_skb(skb); |
| } else { |
| consume_skb(skb); |
| } |
| |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += TX_BYTES_TRANSFERRED(txd->report); |
| dev->stats.collisions += TX_EARLY_COLLISIONS(txd->report); |
| |
| txb->skb = NULL; |
| txb->ready = false; |
| txd->report = 0; |
| |
| done = (done + 1) % TX_DESC_COUNT; |
| packets++; |
| } |
| |
| if (packets) { |
| smp_mb__before_atomic(); |
| atomic_add(packets, &priv->tx_free); |
| netdev_completed_queue(dev, packets, len); |
| netif_wake_queue(dev); |
| priv->tx_done = done; |
| } |
| } |
| |
| static irqreturn_t nb8800_irq(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct nb8800_priv *priv = netdev_priv(dev); |
| irqreturn_t ret = IRQ_NONE; |
| u32 val; |
| |
| /* tx interrupt */ |
| val = nb8800_readl(priv, NB8800_TXC_SR); |
| if (val) { |
| nb8800_writel(priv, NB8800_TXC_SR, val); |
| |
| if (val & TSR_DI) |
| nb8800_tx_dma_start_irq(dev); |
| |
| if (val & TSR_TI) |
| napi_schedule_irqoff(&priv->napi); |
| |
| if (unlikely(val & TSR_DE)) |
| netdev_err(dev, "TX DMA error\n"); |
| |
| /* should never happen with automatic status retrieval */ |
| if (unlikely(val & TSR_TO)) |
| netdev_err(dev, "TX Status FIFO overflow\n"); |
| |
| ret = IRQ_HANDLED; |
| } |
| |
| /* rx interrupt */ |
| val = nb8800_readl(priv, NB8800_RXC_SR); |
| if (val) { |
| nb8800_writel(priv, NB8800_RXC_SR, val); |
| |
| if (likely(val & (RSR_RI | RSR_DI))) { |
| nb8800_writel(priv, NB8800_RX_ITR, priv->rx_itr_poll); |
| napi_schedule_irqoff(&priv->napi); |
| } |
| |
| if (unlikely(val & RSR_DE)) |
| netdev_err(dev, "RX DMA error\n"); |
| |
| /* should never happen with automatic status retrieval */ |
| if (unlikely(val & RSR_RO)) |
| netdev_err(dev, "RX Status FIFO overflow\n"); |
| |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| static void nb8800_mac_config(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| bool gigabit = priv->speed == SPEED_1000; |
| u32 mac_mode_mask = RGMII_MODE | HALF_DUPLEX | GMAC_MODE; |
| u32 mac_mode = 0; |
| u32 slot_time; |
| u32 phy_clk; |
| u32 ict; |
| |
| if (!priv->duplex) |
| mac_mode |= HALF_DUPLEX; |
| |
| if (gigabit) { |
| if (priv->phy_mode == PHY_INTERFACE_MODE_RGMII) |
| mac_mode |= RGMII_MODE; |
| |
| mac_mode |= GMAC_MODE; |
| phy_clk = 125000000; |
| |
| /* Should be 512 but register is only 8 bits */ |
| slot_time = 255; |
| } else { |
| phy_clk = 25000000; |
| slot_time = 128; |
| } |
| |
| ict = DIV_ROUND_UP(phy_clk, clk_get_rate(priv->clk)); |
| |
| nb8800_writeb(priv, NB8800_IC_THRESHOLD, ict); |
| nb8800_writeb(priv, NB8800_SLOT_TIME, slot_time); |
| nb8800_maskb(priv, NB8800_MAC_MODE, mac_mode_mask, mac_mode); |
| } |
| |
| static void nb8800_pause_config(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| u32 rxcr; |
| |
| if (priv->pause_aneg) { |
| if (!phydev || !phydev->link) |
| return; |
| |
| priv->pause_rx = phydev->pause; |
| priv->pause_tx = phydev->pause ^ phydev->asym_pause; |
| } |
| |
| nb8800_modb(priv, NB8800_RX_CTL, RX_PAUSE_EN, priv->pause_rx); |
| |
| rxcr = nb8800_readl(priv, NB8800_RXC_CR); |
| if (!!(rxcr & RCR_FL) == priv->pause_tx) |
| return; |
| |
| if (netif_running(dev)) { |
| napi_disable(&priv->napi); |
| netif_tx_lock_bh(dev); |
| nb8800_dma_stop(dev); |
| nb8800_modl(priv, NB8800_RXC_CR, RCR_FL, priv->pause_tx); |
| nb8800_start_rx(dev); |
| netif_tx_unlock_bh(dev); |
| napi_enable(&priv->napi); |
| } else { |
| nb8800_modl(priv, NB8800_RXC_CR, RCR_FL, priv->pause_tx); |
| } |
| } |
| |
| static void nb8800_link_reconfigure(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| int change = 0; |
| |
| if (phydev->link) { |
| if (phydev->speed != priv->speed) { |
| priv->speed = phydev->speed; |
| change = 1; |
| } |
| |
| if (phydev->duplex != priv->duplex) { |
| priv->duplex = phydev->duplex; |
| change = 1; |
| } |
| |
| if (change) |
| nb8800_mac_config(dev); |
| |
| nb8800_pause_config(dev); |
| } |
| |
| if (phydev->link != priv->link) { |
| priv->link = phydev->link; |
| change = 1; |
| } |
| |
| if (change) |
| phy_print_status(phydev); |
| } |
| |
| static void nb8800_update_mac_addr(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| int i; |
| |
| for (i = 0; i < ETH_ALEN; i++) |
| nb8800_writeb(priv, NB8800_SRC_ADDR(i), dev->dev_addr[i]); |
| |
| for (i = 0; i < ETH_ALEN; i++) |
| nb8800_writeb(priv, NB8800_UC_ADDR(i), dev->dev_addr[i]); |
| } |
| |
| static int nb8800_set_mac_address(struct net_device *dev, void *addr) |
| { |
| struct sockaddr *sock = addr; |
| |
| if (netif_running(dev)) |
| return -EBUSY; |
| |
| ether_addr_copy(dev->dev_addr, sock->sa_data); |
| nb8800_update_mac_addr(dev); |
| |
| return 0; |
| } |
| |
| static void nb8800_mc_init(struct net_device *dev, int val) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| |
| nb8800_writeb(priv, NB8800_MC_INIT, val); |
| readb_poll_timeout_atomic(priv->base + NB8800_MC_INIT, val, !val, |
| 1, 1000); |
| } |
| |
| static void nb8800_set_rx_mode(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct netdev_hw_addr *ha; |
| int i; |
| |
| if (dev->flags & (IFF_PROMISC | IFF_ALLMULTI)) { |
| nb8800_mac_af(dev, false); |
| return; |
| } |
| |
| nb8800_mac_af(dev, true); |
| nb8800_mc_init(dev, 0); |
| |
| netdev_for_each_mc_addr(ha, dev) { |
| for (i = 0; i < ETH_ALEN; i++) |
| nb8800_writeb(priv, NB8800_MC_ADDR(i), ha->addr[i]); |
| |
| nb8800_mc_init(dev, 0xff); |
| } |
| } |
| |
| #define RX_DESC_SIZE (RX_DESC_COUNT * sizeof(struct nb8800_rx_desc)) |
| #define TX_DESC_SIZE (TX_DESC_COUNT * sizeof(struct nb8800_tx_desc)) |
| |
| static void nb8800_dma_free(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| unsigned int i; |
| |
| if (priv->rx_bufs) { |
| for (i = 0; i < RX_DESC_COUNT; i++) |
| if (priv->rx_bufs[i].page) |
| put_page(priv->rx_bufs[i].page); |
| |
| kfree(priv->rx_bufs); |
| priv->rx_bufs = NULL; |
| } |
| |
| if (priv->tx_bufs) { |
| for (i = 0; i < TX_DESC_COUNT; i++) |
| kfree_skb(priv->tx_bufs[i].skb); |
| |
| kfree(priv->tx_bufs); |
| priv->tx_bufs = NULL; |
| } |
| |
| if (priv->rx_descs) { |
| dma_free_coherent(dev->dev.parent, RX_DESC_SIZE, priv->rx_descs, |
| priv->rx_desc_dma); |
| priv->rx_descs = NULL; |
| } |
| |
| if (priv->tx_descs) { |
| dma_free_coherent(dev->dev.parent, TX_DESC_SIZE, priv->tx_descs, |
| priv->tx_desc_dma); |
| priv->tx_descs = NULL; |
| } |
| } |
| |
| static void nb8800_dma_reset(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct nb8800_rx_desc *rxd; |
| struct nb8800_tx_desc *txd; |
| unsigned int i; |
| |
| for (i = 0; i < RX_DESC_COUNT; i++) { |
| dma_addr_t rx_dma = priv->rx_desc_dma + i * sizeof(*rxd); |
| |
| rxd = &priv->rx_descs[i]; |
| rxd->desc.n_addr = rx_dma + sizeof(*rxd); |
| rxd->desc.r_addr = |
| rx_dma + offsetof(struct nb8800_rx_desc, report); |
| rxd->desc.config = priv->rx_dma_config; |
| rxd->report = 0; |
| } |
| |
| rxd->desc.n_addr = priv->rx_desc_dma; |
| rxd->desc.config |= DESC_EOC; |
| |
| priv->rx_eoc = RX_DESC_COUNT - 1; |
| |
| for (i = 0; i < TX_DESC_COUNT; i++) { |
| struct nb8800_tx_buf *txb = &priv->tx_bufs[i]; |
| dma_addr_t r_dma = txb->dma_desc + |
| offsetof(struct nb8800_tx_desc, report); |
| |
| txd = &priv->tx_descs[i]; |
| txd->desc[0].r_addr = r_dma; |
| txd->desc[1].r_addr = r_dma; |
| txd->report = 0; |
| } |
| |
| priv->tx_next = 0; |
| priv->tx_queue = 0; |
| priv->tx_done = 0; |
| atomic_set(&priv->tx_free, TX_DESC_COUNT); |
| |
| nb8800_writel(priv, NB8800_RX_DESC_ADDR, priv->rx_desc_dma); |
| |
| wmb(); /* ensure all setup is written before starting */ |
| } |
| |
| static int nb8800_dma_init(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| unsigned int n_rx = RX_DESC_COUNT; |
| unsigned int n_tx = TX_DESC_COUNT; |
| unsigned int i; |
| int err; |
| |
| priv->rx_descs = dma_alloc_coherent(dev->dev.parent, RX_DESC_SIZE, |
| &priv->rx_desc_dma, GFP_KERNEL); |
| if (!priv->rx_descs) |
| goto err_out; |
| |
| priv->rx_bufs = kcalloc(n_rx, sizeof(*priv->rx_bufs), GFP_KERNEL); |
| if (!priv->rx_bufs) |
| goto err_out; |
| |
| for (i = 0; i < n_rx; i++) { |
| err = nb8800_alloc_rx(dev, i, false); |
| if (err) |
| goto err_out; |
| } |
| |
| priv->tx_descs = dma_alloc_coherent(dev->dev.parent, TX_DESC_SIZE, |
| &priv->tx_desc_dma, GFP_KERNEL); |
| if (!priv->tx_descs) |
| goto err_out; |
| |
| priv->tx_bufs = kcalloc(n_tx, sizeof(*priv->tx_bufs), GFP_KERNEL); |
| if (!priv->tx_bufs) |
| goto err_out; |
| |
| for (i = 0; i < n_tx; i++) |
| priv->tx_bufs[i].dma_desc = |
| priv->tx_desc_dma + i * sizeof(struct nb8800_tx_desc); |
| |
| nb8800_dma_reset(dev); |
| |
| return 0; |
| |
| err_out: |
| nb8800_dma_free(dev); |
| |
| return -ENOMEM; |
| } |
| |
| static int nb8800_dma_stop(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct nb8800_tx_buf *txb = &priv->tx_bufs[0]; |
| struct nb8800_tx_desc *txd = &priv->tx_descs[0]; |
| int retry = 5; |
| u32 txcr; |
| u32 rxcr; |
| int err; |
| unsigned int i; |
| |
| /* wait for tx to finish */ |
| err = readl_poll_timeout_atomic(priv->base + NB8800_TXC_CR, txcr, |
| !(txcr & TCR_EN) && |
| priv->tx_done == priv->tx_next, |
| 1000, 1000000); |
| if (err) |
| return err; |
| |
| /* The rx DMA only stops if it reaches the end of chain. |
| * To make this happen, we set the EOC flag on all rx |
| * descriptors, put the device in loopback mode, and send |
| * a few dummy frames. The interrupt handler will ignore |
| * these since NAPI is disabled and no real frames are in |
| * the tx queue. |
| */ |
| |
| for (i = 0; i < RX_DESC_COUNT; i++) |
| priv->rx_descs[i].desc.config |= DESC_EOC; |
| |
| txd->desc[0].s_addr = |
| txb->dma_desc + offsetof(struct nb8800_tx_desc, buf); |
| txd->desc[0].config = DESC_BTS(2) | DESC_DS | DESC_EOF | DESC_EOC | 8; |
| memset(txd->buf, 0, sizeof(txd->buf)); |
| |
| nb8800_mac_af(dev, false); |
| nb8800_setb(priv, NB8800_MAC_MODE, LOOPBACK_EN); |
| |
| do { |
| nb8800_writel(priv, NB8800_TX_DESC_ADDR, txb->dma_desc); |
| wmb(); |
| nb8800_writel(priv, NB8800_TXC_CR, txcr | TCR_EN); |
| |
| err = readl_poll_timeout_atomic(priv->base + NB8800_RXC_CR, |
| rxcr, !(rxcr & RCR_EN), |
| 1000, 100000); |
| } while (err && --retry); |
| |
| nb8800_mac_af(dev, true); |
| nb8800_clearb(priv, NB8800_MAC_MODE, LOOPBACK_EN); |
| nb8800_dma_reset(dev); |
| |
| return retry ? 0 : -ETIMEDOUT; |
| } |
| |
| static void nb8800_pause_adv(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| u32 adv = 0; |
| |
| if (!phydev) |
| return; |
| |
| if (priv->pause_rx) |
| adv |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; |
| if (priv->pause_tx) |
| adv ^= ADVERTISED_Asym_Pause; |
| |
| phydev->supported |= adv; |
| phydev->advertising |= adv; |
| } |
| |
| static int nb8800_open(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct phy_device *phydev; |
| int err; |
| |
| /* clear any pending interrupts */ |
| nb8800_writel(priv, NB8800_RXC_SR, 0xf); |
| nb8800_writel(priv, NB8800_TXC_SR, 0xf); |
| |
| err = nb8800_dma_init(dev); |
| if (err) |
| return err; |
| |
| err = request_irq(dev->irq, nb8800_irq, 0, dev_name(&dev->dev), dev); |
| if (err) |
| goto err_free_dma; |
| |
| nb8800_mac_rx(dev, true); |
| nb8800_mac_tx(dev, true); |
| |
| phydev = of_phy_connect(dev, priv->phy_node, |
| nb8800_link_reconfigure, 0, |
| priv->phy_mode); |
| if (!phydev) |
| goto err_free_irq; |
| |
| nb8800_pause_adv(dev); |
| |
| netdev_reset_queue(dev); |
| napi_enable(&priv->napi); |
| netif_start_queue(dev); |
| |
| nb8800_start_rx(dev); |
| phy_start(phydev); |
| |
| return 0; |
| |
| err_free_irq: |
| free_irq(dev->irq, dev); |
| err_free_dma: |
| nb8800_dma_free(dev); |
| |
| return err; |
| } |
| |
| static int nb8800_stop(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| |
| phy_stop(phydev); |
| |
| netif_stop_queue(dev); |
| napi_disable(&priv->napi); |
| |
| nb8800_dma_stop(dev); |
| nb8800_mac_rx(dev, false); |
| nb8800_mac_tx(dev, false); |
| |
| phy_disconnect(phydev); |
| |
| free_irq(dev->irq, dev); |
| |
| nb8800_dma_free(dev); |
| |
| return 0; |
| } |
| |
| static int nb8800_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| return phy_mii_ioctl(dev->phydev, rq, cmd); |
| } |
| |
| static const struct net_device_ops nb8800_netdev_ops = { |
| .ndo_open = nb8800_open, |
| .ndo_stop = nb8800_stop, |
| .ndo_start_xmit = nb8800_xmit, |
| .ndo_set_mac_address = nb8800_set_mac_address, |
| .ndo_set_rx_mode = nb8800_set_rx_mode, |
| .ndo_do_ioctl = nb8800_ioctl, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static int nb8800_nway_reset(struct net_device *dev) |
| { |
| struct phy_device *phydev = dev->phydev; |
| |
| if (!phydev) |
| return -ENODEV; |
| |
| return genphy_restart_aneg(phydev); |
| } |
| |
| static void nb8800_get_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *pp) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| |
| pp->autoneg = priv->pause_aneg; |
| pp->rx_pause = priv->pause_rx; |
| pp->tx_pause = priv->pause_tx; |
| } |
| |
| static int nb8800_set_pauseparam(struct net_device *dev, |
| struct ethtool_pauseparam *pp) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| |
| priv->pause_aneg = pp->autoneg; |
| priv->pause_rx = pp->rx_pause; |
| priv->pause_tx = pp->tx_pause; |
| |
| nb8800_pause_adv(dev); |
| |
| if (!priv->pause_aneg) |
| nb8800_pause_config(dev); |
| else if (phydev) |
| phy_start_aneg(phydev); |
| |
| return 0; |
| } |
| |
| static const char nb8800_stats_names[][ETH_GSTRING_LEN] = { |
| "rx_bytes_ok", |
| "rx_frames_ok", |
| "rx_undersize_frames", |
| "rx_fragment_frames", |
| "rx_64_byte_frames", |
| "rx_127_byte_frames", |
| "rx_255_byte_frames", |
| "rx_511_byte_frames", |
| "rx_1023_byte_frames", |
| "rx_max_size_frames", |
| "rx_oversize_frames", |
| "rx_bad_fcs_frames", |
| "rx_broadcast_frames", |
| "rx_multicast_frames", |
| "rx_control_frames", |
| "rx_pause_frames", |
| "rx_unsup_control_frames", |
| "rx_align_error_frames", |
| "rx_overrun_frames", |
| "rx_jabber_frames", |
| "rx_bytes", |
| "rx_frames", |
| |
| "tx_bytes_ok", |
| "tx_frames_ok", |
| "tx_64_byte_frames", |
| "tx_127_byte_frames", |
| "tx_255_byte_frames", |
| "tx_511_byte_frames", |
| "tx_1023_byte_frames", |
| "tx_max_size_frames", |
| "tx_oversize_frames", |
| "tx_broadcast_frames", |
| "tx_multicast_frames", |
| "tx_control_frames", |
| "tx_pause_frames", |
| "tx_underrun_frames", |
| "tx_single_collision_frames", |
| "tx_multi_collision_frames", |
| "tx_deferred_collision_frames", |
| "tx_late_collision_frames", |
| "tx_excessive_collision_frames", |
| "tx_bytes", |
| "tx_frames", |
| "tx_collisions", |
| }; |
| |
| #define NB8800_NUM_STATS ARRAY_SIZE(nb8800_stats_names) |
| |
| static int nb8800_get_sset_count(struct net_device *dev, int sset) |
| { |
| if (sset == ETH_SS_STATS) |
| return NB8800_NUM_STATS; |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static void nb8800_get_strings(struct net_device *dev, u32 sset, u8 *buf) |
| { |
| if (sset == ETH_SS_STATS) |
| memcpy(buf, &nb8800_stats_names, sizeof(nb8800_stats_names)); |
| } |
| |
| static u32 nb8800_read_stat(struct net_device *dev, int index) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| |
| nb8800_writeb(priv, NB8800_STAT_INDEX, index); |
| |
| return nb8800_readl(priv, NB8800_STAT_DATA); |
| } |
| |
| static void nb8800_get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *estats, u64 *st) |
| { |
| unsigned int i; |
| u32 rx, tx; |
| |
| for (i = 0; i < NB8800_NUM_STATS / 2; i++) { |
| rx = nb8800_read_stat(dev, i); |
| tx = nb8800_read_stat(dev, i | 0x80); |
| st[i] = rx; |
| st[i + NB8800_NUM_STATS / 2] = tx; |
| } |
| } |
| |
| static const struct ethtool_ops nb8800_ethtool_ops = { |
| .nway_reset = nb8800_nway_reset, |
| .get_link = ethtool_op_get_link, |
| .get_pauseparam = nb8800_get_pauseparam, |
| .set_pauseparam = nb8800_set_pauseparam, |
| .get_sset_count = nb8800_get_sset_count, |
| .get_strings = nb8800_get_strings, |
| .get_ethtool_stats = nb8800_get_ethtool_stats, |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, |
| }; |
| |
| static int nb8800_hw_init(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| u32 val; |
| |
| val = TX_RETRY_EN | TX_PAD_EN | TX_APPEND_FCS; |
| nb8800_writeb(priv, NB8800_TX_CTL1, val); |
| |
| /* Collision retry count */ |
| nb8800_writeb(priv, NB8800_TX_CTL2, 5); |
| |
| val = RX_PAD_STRIP | RX_AF_EN; |
| nb8800_writeb(priv, NB8800_RX_CTL, val); |
| |
| /* Chosen by fair dice roll */ |
| nb8800_writeb(priv, NB8800_RANDOM_SEED, 4); |
| |
| /* TX cycles per deferral period */ |
| nb8800_writeb(priv, NB8800_TX_SDP, 12); |
| |
| /* The following three threshold values have been |
| * experimentally determined for good results. |
| */ |
| |
| /* RX/TX FIFO threshold for partial empty (64-bit entries) */ |
| nb8800_writeb(priv, NB8800_PE_THRESHOLD, 0); |
| |
| /* RX/TX FIFO threshold for partial full (64-bit entries) */ |
| nb8800_writeb(priv, NB8800_PF_THRESHOLD, 255); |
| |
| /* Buffer size for transmit (64-bit entries) */ |
| nb8800_writeb(priv, NB8800_TX_BUFSIZE, 64); |
| |
| /* Configure tx DMA */ |
| |
| val = nb8800_readl(priv, NB8800_TXC_CR); |
| val &= TCR_LE; /* keep endian setting */ |
| val |= TCR_DM; /* DMA descriptor mode */ |
| val |= TCR_RS; /* automatically store tx status */ |
| val |= TCR_DIE; /* interrupt on DMA chain completion */ |
| val |= TCR_TFI(7); /* interrupt after 7 frames transmitted */ |
| val |= TCR_BTS(2); /* 32-byte bus transaction size */ |
| nb8800_writel(priv, NB8800_TXC_CR, val); |
| |
| /* TX complete interrupt after 10 ms or 7 frames (see above) */ |
| val = clk_get_rate(priv->clk) / 100; |
| nb8800_writel(priv, NB8800_TX_ITR, val); |
| |
| /* Configure rx DMA */ |
| |
| val = nb8800_readl(priv, NB8800_RXC_CR); |
| val &= RCR_LE; /* keep endian setting */ |
| val |= RCR_DM; /* DMA descriptor mode */ |
| val |= RCR_RS; /* automatically store rx status */ |
| val |= RCR_DIE; /* interrupt at end of DMA chain */ |
| val |= RCR_RFI(7); /* interrupt after 7 frames received */ |
| val |= RCR_BTS(2); /* 32-byte bus transaction size */ |
| nb8800_writel(priv, NB8800_RXC_CR, val); |
| |
| /* The rx interrupt can fire before the DMA has completed |
| * unless a small delay is added. 50 us is hopefully enough. |
| */ |
| priv->rx_itr_irq = clk_get_rate(priv->clk) / 20000; |
| |
| /* In NAPI poll mode we want to disable interrupts, but the |
| * hardware does not permit this. Delay 10 ms instead. |
| */ |
| priv->rx_itr_poll = clk_get_rate(priv->clk) / 100; |
| |
| nb8800_writel(priv, NB8800_RX_ITR, priv->rx_itr_irq); |
| |
| priv->rx_dma_config = RX_BUF_SIZE | DESC_BTS(2) | DESC_DS | DESC_EOF; |
| |
| /* Flow control settings */ |
| |
| /* Pause time of 0.1 ms */ |
| val = 100000 / 512; |
| nb8800_writeb(priv, NB8800_PQ1, val >> 8); |
| nb8800_writeb(priv, NB8800_PQ2, val & 0xff); |
| |
| /* Auto-negotiate by default */ |
| priv->pause_aneg = true; |
| priv->pause_rx = true; |
| priv->pause_tx = true; |
| |
| nb8800_mc_init(dev, 0); |
| |
| return 0; |
| } |
| |
| static int nb8800_tangox_init(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| u32 pad_mode = PAD_MODE_MII; |
| |
| switch (priv->phy_mode) { |
| case PHY_INTERFACE_MODE_MII: |
| case PHY_INTERFACE_MODE_GMII: |
| pad_mode = PAD_MODE_MII; |
| break; |
| |
| case PHY_INTERFACE_MODE_RGMII: |
| pad_mode = PAD_MODE_RGMII; |
| break; |
| |
| case PHY_INTERFACE_MODE_RGMII_TXID: |
| pad_mode = PAD_MODE_RGMII | PAD_MODE_GTX_CLK_DELAY; |
| break; |
| |
| default: |
| dev_err(dev->dev.parent, "unsupported phy mode %s\n", |
| phy_modes(priv->phy_mode)); |
| return -EINVAL; |
| } |
| |
| nb8800_writeb(priv, NB8800_TANGOX_PAD_MODE, pad_mode); |
| |
| return 0; |
| } |
| |
| static int nb8800_tangox_reset(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| int clk_div; |
| |
| nb8800_writeb(priv, NB8800_TANGOX_RESET, 0); |
| usleep_range(1000, 10000); |
| nb8800_writeb(priv, NB8800_TANGOX_RESET, 1); |
| |
| wmb(); /* ensure reset is cleared before proceeding */ |
| |
| clk_div = DIV_ROUND_UP(clk_get_rate(priv->clk), 2 * MAX_MDC_CLOCK); |
| nb8800_writew(priv, NB8800_TANGOX_MDIO_CLKDIV, clk_div); |
| |
| return 0; |
| } |
| |
| static const struct nb8800_ops nb8800_tangox_ops = { |
| .init = nb8800_tangox_init, |
| .reset = nb8800_tangox_reset, |
| }; |
| |
| static int nb8800_tango4_init(struct net_device *dev) |
| { |
| struct nb8800_priv *priv = netdev_priv(dev); |
| int err; |
| |
| err = nb8800_tangox_init(dev); |
| if (err) |
| return err; |
| |
| /* On tango4 interrupt on DMA completion per frame works and gives |
| * better performance despite generating more rx interrupts. |
| */ |
| |
| /* Disable unnecessary interrupt on rx completion */ |
| nb8800_clearl(priv, NB8800_RXC_CR, RCR_RFI(7)); |
| |
| /* Request interrupt on descriptor DMA completion */ |
| priv->rx_dma_config |= DESC_ID; |
| |
| return 0; |
| } |
| |
| static const struct nb8800_ops nb8800_tango4_ops = { |
| .init = nb8800_tango4_init, |
| .reset = nb8800_tangox_reset, |
| }; |
| |
| static const struct of_device_id nb8800_dt_ids[] = { |
| { |
| .compatible = "aurora,nb8800", |
| }, |
| { |
| .compatible = "sigma,smp8642-ethernet", |
| .data = &nb8800_tangox_ops, |
| }, |
| { |
| .compatible = "sigma,smp8734-ethernet", |
| .data = &nb8800_tango4_ops, |
| }, |
| { } |
| }; |
| |
| static int nb8800_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| const struct nb8800_ops *ops = NULL; |
| struct nb8800_priv *priv; |
| struct resource *res; |
| struct net_device *dev; |
| struct mii_bus *bus; |
| const unsigned char *mac; |
| void __iomem *base; |
| int irq; |
| int ret; |
| |
| match = of_match_device(nb8800_dt_ids, &pdev->dev); |
| if (match) |
| ops = match->data; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq <= 0) { |
| dev_err(&pdev->dev, "No IRQ\n"); |
| return -EINVAL; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| dev_dbg(&pdev->dev, "AU-NB8800 Ethernet at %pa\n", &res->start); |
| |
| dev = alloc_etherdev(sizeof(*priv)); |
| if (!dev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, dev); |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| priv = netdev_priv(dev); |
| priv->base = base; |
| |
| priv->phy_mode = of_get_phy_mode(pdev->dev.of_node); |
| if (priv->phy_mode < 0) |
| priv->phy_mode = PHY_INTERFACE_MODE_RGMII; |
| |
| priv->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(priv->clk)) { |
| dev_err(&pdev->dev, "failed to get clock\n"); |
| ret = PTR_ERR(priv->clk); |
| goto err_free_dev; |
| } |
| |
| ret = clk_prepare_enable(priv->clk); |
| if (ret) |
| goto err_free_dev; |
| |
| spin_lock_init(&priv->tx_lock); |
| |
| if (ops && ops->reset) { |
| ret = ops->reset(dev); |
| if (ret) |
| goto err_free_dev; |
| } |
| |
| bus = devm_mdiobus_alloc(&pdev->dev); |
| if (!bus) { |
| ret = -ENOMEM; |
| goto err_disable_clk; |
| } |
| |
| bus->name = "nb8800-mii"; |
| bus->read = nb8800_mdio_read; |
| bus->write = nb8800_mdio_write; |
| bus->parent = &pdev->dev; |
| snprintf(bus->id, MII_BUS_ID_SIZE, "%lx.nb8800-mii", |
| (unsigned long)res->start); |
| bus->priv = priv; |
| |
| ret = of_mdiobus_register(bus, pdev->dev.of_node); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register MII bus\n"); |
| goto err_disable_clk; |
| } |
| |
| if (of_phy_is_fixed_link(pdev->dev.of_node)) { |
| ret = of_phy_register_fixed_link(pdev->dev.of_node); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "bad fixed-link spec\n"); |
| goto err_free_bus; |
| } |
| priv->phy_node = of_node_get(pdev->dev.of_node); |
| } |
| |
| if (!priv->phy_node) |
| priv->phy_node = of_parse_phandle(pdev->dev.of_node, |
| "phy-handle", 0); |
| |
| if (!priv->phy_node) { |
| dev_err(&pdev->dev, "no PHY specified\n"); |
| ret = -ENODEV; |
| goto err_free_bus; |
| } |
| |
| priv->mii_bus = bus; |
| |
| ret = nb8800_hw_init(dev); |
| if (ret) |
| goto err_free_bus; |
| |
| if (ops && ops->init) { |
| ret = ops->init(dev); |
| if (ret) |
| goto err_free_bus; |
| } |
| |
| dev->netdev_ops = &nb8800_netdev_ops; |
| dev->ethtool_ops = &nb8800_ethtool_ops; |
| dev->flags |= IFF_MULTICAST; |
| dev->irq = irq; |
| |
| mac = of_get_mac_address(pdev->dev.of_node); |
| if (mac) |
| ether_addr_copy(dev->dev_addr, mac); |
| |
| if (!is_valid_ether_addr(dev->dev_addr)) |
| eth_hw_addr_random(dev); |
| |
| nb8800_update_mac_addr(dev); |
| |
| netif_carrier_off(dev); |
| |
| ret = register_netdev(dev); |
| if (ret) { |
| netdev_err(dev, "failed to register netdev\n"); |
| goto err_free_dma; |
| } |
| |
| netif_napi_add(dev, &priv->napi, nb8800_poll, NAPI_POLL_WEIGHT); |
| |
| netdev_info(dev, "MAC address %pM\n", dev->dev_addr); |
| |
| return 0; |
| |
| err_free_dma: |
| nb8800_dma_free(dev); |
| err_free_bus: |
| mdiobus_unregister(bus); |
| err_disable_clk: |
| clk_disable_unprepare(priv->clk); |
| err_free_dev: |
| free_netdev(dev); |
| |
| return ret; |
| } |
| |
| static int nb8800_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct nb8800_priv *priv = netdev_priv(ndev); |
| |
| unregister_netdev(ndev); |
| |
| mdiobus_unregister(priv->mii_bus); |
| |
| clk_disable_unprepare(priv->clk); |
| |
| nb8800_dma_free(ndev); |
| free_netdev(ndev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver nb8800_driver = { |
| .driver = { |
| .name = "nb8800", |
| .of_match_table = nb8800_dt_ids, |
| }, |
| .probe = nb8800_probe, |
| .remove = nb8800_remove, |
| }; |
| |
| module_platform_driver(nb8800_driver); |
| |
| MODULE_DESCRIPTION("Aurora AU-NB8800 Ethernet driver"); |
| MODULE_AUTHOR("Mans Rullgard <mans@mansr.com>"); |
| MODULE_LICENSE("GPL"); |