Gitiles
Code Review Sign In
LeafOS / LeafOS-Devices / android_kernel_samsung_gta4xl / 307f2fb95e9b96b3577916e73d92e104f8f26494 / . / drivers / media / usb / em28xx / em28xx-cards.c
blob: 83bfbe4c980fdad90b23b952f739f038ef12bc3f [file] [log] [blame]
/*
em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
video capture devices
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
Markus Rechberger <mrechberger@gmail.com>
Mauro Carvalho Chehab <mchehab@infradead.org>
Sascha Sommer <saschasommer@freenet.de>
Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/usb.h>
#include <media/tuner.h>
#include <media/msp3400.h>
#include <media/saa7115.h>
#include <media/tvp5150.h>
#include <media/tvaudio.h>
#include <media/i2c-addr.h>
#include <media/tveeprom.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
#include "em28xx.h"
#define DRIVER_NAME "em28xx"
static int tuner = -1;
module_param(tuner, int, 0444);
MODULE_PARM_DESC(tuner, "tuner type");
static unsigned int disable_ir;
module_param(disable_ir, int, 0444);
MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
static unsigned int disable_usb_speed_check;
module_param(disable_usb_speed_check, int, 0444);
MODULE_PARM_DESC(disable_usb_speed_check,
"override min bandwidth requirement of 480M bps");
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
static int usb_xfer_mode = -1;
module_param(usb_xfer_mode, int, 0444);
MODULE_PARM_DESC(usb_xfer_mode,
"USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
static unsigned long em28xx_devused;
struct em28xx_hash_table {
unsigned long hash;
unsigned int model;
unsigned int tuner;
};
static void em28xx_pre_card_setup(struct em28xx *dev);
/*
* Reset sequences for analog/digital modes
*/
/* Reset for the most [analog] boards */
static struct em28xx_reg_seq default_analog[] = {
{EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq default_digital[] = {
{EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 analog */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
{EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
{0x05, 0xff, 0x10, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
{EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0x0f, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
{ -1, -1, -1, -1},
};
/* Board Hauppauge WinTV HVR 900 (R2) digital */
static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
{EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x0c, 0x0f, 10},
{ -1, -1, -1, -1},
};
/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
{EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
/* Board - EM2870 Kworld 355u
Analog - No input analog */
/* Board - EM2882 Kworld 315U digital */
static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM28XX_R08_GPIO, 0xfe, 0xff, 10},
{EM2880_R04_GPO, 0x04, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
{EM28XX_R08_GPIO, 0x7e, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
{EM2880_R04_GPO, 0x08, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq kworld_330u_analog[] = {
{EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq kworld_330u_digital[] = {
{EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
/* Evga inDtube
GPIO0 - Enable digital power (s5h1409) - low to enable
GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
GPIO4 - xc3028 reset
GOP3 - s5h1409 reset
*/
static struct em28xx_reg_seq evga_indtube_analog[] = {
{EM28XX_R08_GPIO, 0x79, 0xff, 60},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq evga_indtube_digital[] = {
{EM28XX_R08_GPIO, 0x7a, 0xff, 1},
{EM2880_R04_GPO, 0x04, 0xff, 10},
{EM2880_R04_GPO, 0x0c, 0xff, 1},
{ -1, -1, -1, -1},
};
/*
* KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
* EM_GPIO_0 - currently unknown
* EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
* EM_GPIO_2 - currently unknown
* EM_GPIO_3 - currently unknown
* EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
* EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
* EM_GPIO_6 - currently unknown
* EM_GPIO_7 - currently unknown
*/
static struct em28xx_reg_seq kworld_a340_digital[] = {
{EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Pinnacle Hybrid Pro eb1a:2881 */
static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
{EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
{EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
{EM2880_R04_GPO, 0x0c, 0xff, 1},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
{EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x00, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
{EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
/* eb1a:2868 Reddo DVB-C USB TV Box
GPIO4 - CU1216L NIM
Other GPIOs seems to be don't care. */
static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
{EM28XX_R08_GPIO, 0xfe, 0xff, 10},
{EM28XX_R08_GPIO, 0xde, 0xff, 10},
{EM28XX_R08_GPIO, 0xfe, 0xff, 10},
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM28XX_R08_GPIO, 0x7f, 0xff, 10},
{EM28XX_R08_GPIO, 0x6f, 0xff, 10},
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{-1, -1, -1, -1},
};
/* Callback for the most boards */
static struct em28xx_reg_seq default_tuner_gpio[] = {
{EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
{EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
{EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
{ -1, -1, -1, -1},
};
/* Mute/unmute */
static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
{EM28XX_R08_GPIO, 5, 7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
{EM28XX_R08_GPIO, 4, 7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq compro_mute_gpio[] = {
{EM28XX_R08_GPIO, 6, 7, 10},
{ -1, -1, -1, -1},
};
/* Terratec AV350 */
static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
{EM28XX_R08_GPIO, 0xff, 0x7f, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq silvercrest_reg_seq[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM28XX_R08_GPIO, 0x01, 0xf7, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq vc211a_enable[] = {
{EM28XX_R08_GPIO, 0xff, 0x07, 10},
{EM28XX_R08_GPIO, 0xff, 0x0f, 10},
{EM28XX_R08_GPIO, 0xff, 0x0b, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq dikom_dk300_digital[] = {
{EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
{EM2880_R04_GPO, 0x08, 0xff, 10},
{ -1, -1, -1, -1},
};
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq leadership_digital[] = {
{EM2874_R80_GPIO, 0x70, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq leadership_reset[] = {
{EM2874_R80_GPIO, 0xf0, 0xff, 10},
{EM2874_R80_GPIO, 0xb0, 0xff, 10},
{EM2874_R80_GPIO, 0xf0, 0xff, 10},
{ -1, -1, -1, -1},
};
/* 2013:024f PCTV nanoStick T2 290e
* GPIO_6 - demod reset
* GPIO_7 - LED
*/
static struct em28xx_reg_seq pctv_290e[] = {
{EM2874_R80_GPIO, 0x00, 0xff, 80},
{EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
{-1, -1, -1, -1},
};
#if 0
static struct em28xx_reg_seq terratec_h5_gpio[] = {
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{EM2874_R80_GPIO, 0xf6, 0xff, 100},
{EM2874_R80_GPIO, 0xf2, 0xff, 50},
{EM2874_R80_GPIO, 0xf6, 0xff, 50},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq terratec_h5_digital[] = {
{EM2874_R80_GPIO, 0xf6, 0xff, 10},
{EM2874_R80_GPIO, 0xe6, 0xff, 100},
{EM2874_R80_GPIO, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
/* 2013:024f PCTV DVB-S2 Stick 460e
* GPIO_0 - POWER_ON
* GPIO_1 - BOOST
* GPIO_2 - VUV_LNB (red LED)
* GPIO_3 - EXT_12V
* GPIO_4 - INT_DEM (DEMOD GPIO_0)
* GPIO_5 - INT_LNB
* GPIO_6 - RESET_DEM
* GPIO_7 - LED (green LED)
*/
static struct em28xx_reg_seq pctv_460e[] = {
{EM2874_R80_GPIO, 0x01, 0xff, 50},
{0x0d, 0xff, 0xff, 50},
{EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
{0x0d, 0x42, 0xff, 50},
{EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
{EM2874_R80_GPIO, 0xff, 0xff, 10},
{EM2874_R80_GPIO, 0xfd, 0xff, 10}, /* xc5000 reset */
{EM2874_R80_GPIO, 0xf9, 0xff, 35},
{EM2874_R80_GPIO, 0xfd, 0xff, 10},
{EM2874_R80_GPIO, 0xff, 0xff, 10},
{EM2874_R80_GPIO, 0xfe, 0xff, 10},
{EM2874_R80_GPIO, 0xbe, 0xff, 10},
{EM2874_R80_GPIO, 0xfe, 0xff, 20},
{ -1, -1, -1, -1},
};
#if 0
static struct em28xx_reg_seq hauppauge_930c_gpio[] = {
{EM2874_R80_GPIO, 0x6f, 0xff, 10},
{EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */
{EM2874_R80_GPIO, 0x6f, 0xff, 10},
{EM2874_R80_GPIO, 0x4f, 0xff, 10},
{ -1, -1, -1, -1},
};
static struct em28xx_reg_seq hauppauge_930c_digital[] = {
{EM2874_R80_GPIO, 0xf6, 0xff, 10},
{EM2874_R80_GPIO, 0xe6, 0xff, 100},
{EM2874_R80_GPIO, 0xa6, 0xff, 10},
{ -1, -1, -1, -1},
};
#endif
/* 1b80:e425 MaxMedia UB425-TC
* GPIO_6 - demod reset, 0=active
* GPIO_7 - LED, 0=active
*/
static struct em28xx_reg_seq maxmedia_ub425_tc[] = {
{EM2874_R80_GPIO, 0x83, 0xff, 100},
{EM2874_R80_GPIO, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
{-1, -1, -1, -1},
};
/* 2304:0242 PCTV QuatroStick (510e)
* GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active
* GPIO_6: demod reset, 0=active
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_510e[] = {
{EM2874_R80_GPIO, 0x10, 0xff, 100},
{EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
{EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
{ -1, -1, -1, -1},
};
/* 2013:0251 PCTV QuatroStick nano (520e)
* GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active
* GPIO_6: demod reset, 0=active
* GPIO_7: LED, 1=active
*/
static struct em28xx_reg_seq pctv_520e[] = {
{EM2874_R80_GPIO, 0x10, 0xff, 100},
{EM2874_R80_GPIO, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
{EM2874_R80_GPIO, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
{EM2874_R80_GPIO, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
{ -1, -1, -1, -1},
};
/*
* Board definitions
*/
struct em28xx_board em28xx_boards[] = {
[EM2750_BOARD_UNKNOWN] = {
.name = "EM2710/EM2750/EM2751 webcam grabber",
.xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = silvercrest_reg_seq,
} },
},
[EM2800_BOARD_UNKNOWN] = {
.name = "Unknown EM2800 video grabber",
.is_em2800 = 1,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_UNKNOWN] = {
.name = "Unknown EM2750/28xx video grabber",
.tuner_type = TUNER_ABSENT,
.is_webcam = 1, /* To enable sensor probe */
},
[EM2750_BOARD_DLCW_130] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "Huaqi DLCW-130",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2820_BOARD_KWORLD_PVRTV2800RF] = {
.name = "Kworld PVR TV 2800 RF",
.tuner_type = TUNER_TEMIC_PAL,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_GADMEI_TVR200] = {
.name = "Gadmei TVR200",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_TERRATEC_CINERGY_250] = {
.name = "Terratec Cinergy 250 USB",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.has_ir_i2c = 1,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_USB_2] = {
.name = "Pinnacle PCTV USB 2",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.has_ir_i2c = 1,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
.name = "Hauppauge WinTV USB 2",
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
.decoder = EM28XX_TVP5150,
.has_msp34xx = 1,
.has_ir_i2c = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = MSP_INPUT_DEFAULT,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
} },
},
[EM2820_BOARD_DLINK_USB_TV] = {
.name = "D-Link DUB-T210 TV Tuner",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
.name = "Hercules Smart TV USB 2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
.name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_GADMEI_UTV310] = {
.name = "Gadmei UTV310",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
.name = "Leadtek Winfast USB II Deluxe",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.has_ir_i2c = 1,
.tvaudio_addr = 0x58,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT2_ACTIVE |
TDA9887_QSS,
.decoder = EM28XX_SAA711X,
.adecoder = EM28XX_TVAUDIO,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE4,
.amux = EM28XX_AMUX_AUX,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE5,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
.radio = {
.type = EM28XX_RADIO,
.amux = EM28XX_AMUX_AUX,
}
},
[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
.name = "Videology 20K14XUSB USB2.0",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2820_BOARD_SILVERCREST_WEBCAM] = {
.name = "Silvercrest Webcam 1.3mpix",
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = silvercrest_reg_seq,
} },
},
[EM2821_BOARD_SUPERCOMP_USB_2] = {
.name = "Supercomp USB 2.0 TV",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2821_BOARD_USBGEAR_VD204] = {
.name = "Usbgear VD204v9",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_NETGMBH_CAM] = {
/* Beijing Huaqi Information Digital Technology Co., Ltd */
.name = "NetGMBH Cam",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2860_BOARD_TYPHOON_DVD_MAKER] = {
.name = "Typhoon DVD Maker",
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_GADMEI_UTV330] = {
.name = "Gadmei UTV330",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_GADMEI_UTV330PLUS] = {
.name = "Gadmei UTV330+",
.tuner_type = TUNER_TNF_5335MF,
.tda9887_conf = TDA9887_PRESENT,
.ir_codes = RC_MAP_GADMEI_RM008Z,
.decoder = EM28XX_SAA711X,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Cinergy A Hybrid XS",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2861_BOARD_KWORLD_PVRTV_300U] = {
.name = "KWorld PVRTV 300U",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
.name = "Yakumo MovieMixer",
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
.name = "EM2860/TVP5150 Reference Design",
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2861_BOARD_PLEXTOR_PX_TV100U] = {
.name = "Plextor ConvertX PX-TV100U",
.tuner_type = TUNER_TNF_5335MF,
.xclk = EM28XX_XCLK_I2S_MSB_TIMING |
EM28XX_XCLK_FREQUENCY_12MHZ,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
.has_msp34xx = 1,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
} },
},
/* Those boards with em2870 are DVB Only*/
[EM2870_BOARD_TERRATEC_XS] = {
.name = "Terratec Cinergy T XS",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
},
[EM2870_BOARD_TERRATEC_XS_MT2060] = {
.name = "Terratec Cinergy T XS (MT2060)",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* MT2060 */
},
[EM2870_BOARD_KWORLD_350U] = {
.name = "Kworld 350 U DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
},
[EM2870_BOARD_KWORLD_355U] = {
.name = "Kworld 355 U DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = default_tuner_gpio,
.has_dvb = 1,
.dvb_gpio = default_digital,
},
[EM2870_BOARD_PINNACLE_PCTV_DVB] = {
.name = "Pinnacle PCTV DVB-T",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* MT2060 */
/* djh - I have serious doubts this is right... */
.xclk = EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_10MHZ,
},
[EM2870_BOARD_COMPRO_VIDEOMATE] = {
.name = "Compro, VideoMate U3",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_ABSENT, /* MT2060 */
},
[EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
.name = "Terratec Hybrid XS Secam",
.has_msp34xx = 1,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = terratec_cinergy_USB_XS_FR_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_cinergy_USB_XS_FR_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_cinergy_USB_XS_FR_analog,
} },
},
[EM2884_BOARD_TERRATEC_H5] = {
.name = "Terratec Cinergy H5",
.has_dvb = 1,
#if 0
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x41,
.dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
.tuner_gpio = terratec_h5_gpio,
#else
.tuner_type = TUNER_ABSENT,
#endif
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
.name = "Hauppauge WinTV HVR 930C",
.has_dvb = 1,
#if 0 /* FIXME: Add analog support */
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x41,
.dvb_gpio = hauppauge_930c_digital,
.tuner_gpio = hauppauge_930c_gpio,
#else
.tuner_type = TUNER_ABSENT,
#endif
.ir_codes = RC_MAP_HAUPPAUGE,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
.name = "C3 Tech Digital Duo HDTV/SDTV USB",
.has_dvb = 1,
/* FIXME: Add analog support - need a saa7136 driver */
.tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
.ir_codes = RC_MAP_EMPTY,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
.dvb_gpio = c3tech_digital_duo_digital,
},
[EM2884_BOARD_CINERGY_HTC_STICK] = {
.name = "Terratec Cinergy HTC Stick",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
.name = "Hauppauge WinTV HVR 900",
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
.name = "Hauppauge WinTV HVR 900 (R2)",
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
.name = "Hauppauge WinTV HVR 850",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
.name = "Hauppauge WinTV HVR 950",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_HAUPPAUGE,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
.name = "Pinnacle PCTV HD Pro Stick",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
.name = "AMD ATI TV Wonder HD 600",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Hybrid XS",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = default_digital,
.ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
/* maybe there's a reason behind it why Terratec sells the Hybrid XS
as Prodigy XS with a different PID, let's keep it separated for now
maybe we'll need it lateron */
[EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
.name = "Terratec Prodigy XS",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2820_BOARD_MSI_VOX_USB_2] = {
.name = "MSI VOX USB 2.0",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE,
.max_range_640_480 = 1,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE4,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_TERRATEC_CINERGY_200] = {
.name = "Terratec Cinergy 200 USB",
.is_em2800 = 1,
.has_ir_i2c = 1,
.tuner_type = TUNER_LG_TALN,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_GRABBEEX_USB2800] = {
.name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
.is_em2800 = 1,
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* capture only board */
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_VC211A] = {
.name = "Actionmaster/LinXcel/Digitus VC211A",
.is_em2800 = 1,
.tuner_type = TUNER_ABSENT, /* Capture-only board */
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = vc211a_enable,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = vc211a_enable,
} },
},
[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
.name = "Leadtek Winfast USB II",
.is_em2800 = 1,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_KWORLD_USB2800] = {
.name = "Kworld USB2800",
.is_em2800 = 1,
.tuner_type = TUNER_PHILIPS_FCV1236D,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PINNACLE_DVC_90] = {
.name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
"/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
.tuner_type = TUNER_ABSENT, /* capture only board */
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2800_BOARD_VGEAR_POCKETTV] = {
.name = "V-Gear PocketTV",
.is_em2800 = 1,
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
.name = "Pixelview PlayTV Box 4 USB 2.0",
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
.aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
.name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
.has_snapshot_button = 1,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
.aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
.name = "EM2860/SAA711X Reference Design",
.has_snapshot_button = 1,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
} },
},
[EM2874_BOARD_LEADERSHIP_ISDBT] = {
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ,
.xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
.name = "EM2874 Leadership ISDBT",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = leadership_reset,
.dvb_gpio = leadership_digital,
.has_dvb = 1,
},
[EM2880_BOARD_MSI_DIGIVOX_AD] = {
.name = "MSI DigiVox A/D",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
} },
},
[EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
.name = "MSI DigiVox A/D II",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
} },
},
[EM2880_BOARD_KWORLD_DVB_305U] = {
.name = "KWorld DVB-T 305U",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2880_BOARD_KWORLD_DVB_310U] = {
.name = "KWorld DVB-T 310U",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.has_dvb = 1,
.dvb_gpio = default_digital,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, { /* S-video has not been tested yet */
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
[EM2882_BOARD_KWORLD_ATSC_315U] = {
.name = "KWorld ATSC 315U HDTV TV Box",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_THOMSON_DTT761X,
.tuner_gpio = em2882_kworld_315u_tuner_gpio,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.has_dvb = 1,
.dvb_gpio = em2882_kworld_315u_digital,
.ir_codes = RC_MAP_KWORLD_315U,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
/* Analog mode - still not ready */
/*.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2882_kworld_315u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2882_kworld_315u_analog1,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2882_kworld_315u_analog1,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
} }, */
},
[EM2880_BOARD_EMPIRE_DUAL_TV] = {
.name = "Empire dual TV",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.has_dvb = 1,
.dvb_gpio = default_digital,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
[EM2881_BOARD_DNT_DA2_HYBRID] = {
.name = "DNT DA2 Hybrid",
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
} },
},
[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
.name = "Pinnacle Hybrid Pro",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = pinnacle_hybrid_pro_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
} },
},
[EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
.name = "Pinnacle Hybrid Pro (330e)",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2882_BOARD_KWORLD_VS_DVBT] = {
.name = "Kworld VS-DVB-T 323UR",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = kworld_330u_digital,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
.ir_codes = RC_MAP_KWORLD_315U,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
.ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
} },
},
[EM2882_BOARD_DIKOM_DK300] = {
.name = "Dikom DK300",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = dikom_dk300_digital,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
} },
},
[EM2883_BOARD_KWORLD_HYBRID_330U] = {
.name = "Kworld PlusTV HD Hybrid 330",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = kworld_330u_digital,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_EEPROM_ON_BOARD |
EM28XX_I2C_EEPROM_KEY_VALID,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = kworld_330u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = kworld_330u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = kworld_330u_analog,
} },
},
[EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
.name = "Compro VideoMate ForYou/Stereo",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.tvaudio_addr = 0xb0,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
.adecoder = EM28XX_TVAUDIO,
.mute_gpio = compro_mute_gpio,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = compro_unmute_tv_gpio,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = compro_unmute_svid_gpio,
} },
},
[EM2860_BOARD_KAIOMY_TVNPC_U2] = {
.name = "Kaiomy TVnPC U2",
.vchannels = 3,
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
.mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.tuner_gpio = default_tuner_gpio,
.ir_codes = RC_MAP_KAIOMY,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
} },
.radio = {
.type = EM28XX_RADIO,
.amux = EM28XX_AMUX_LINE_IN,
}
},
[EM2860_BOARD_EASYCAP] = {
.name = "Easy Cap Capture DC-60",
.vchannels = 2,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2820_BOARD_IODATA_GVMVP_SZ] = {
.name = "IO-DATA GV-MVP/SZ",
.tuner_type = TUNER_PHILIPS_FM1236_MK3,
.tuner_gpio = default_tuner_gpio,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, { /* Composite has not been tested yet */
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_VIDEO,
}, { /* S-video has not been tested yet */
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_VIDEO,
} },
},
[EM2860_BOARD_TERRATEC_GRABBY] = {
.name = "Terratec Grabby",
.vchannels = 2,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2860_BOARD_TERRATEC_AV350] = {
.name = "Terratec AV350",
.vchannels = 2,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_TVP5150,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.mute_gpio = terratec_av350_mute_gpio,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AUDIO_SRC_LINE,
.gpio = terratec_av350_unmute_gpio,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AUDIO_SRC_LINE,
.gpio = terratec_av350_unmute_gpio,
} },
},
[EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
.name = "Elgato Video Capture",
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
[EM2882_BOARD_EVGA_INDTUBE] = {
.name = "Evga inDtube",
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
.decoder = EM28XX_TVP5150,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = evga_indtube_digital,
.ir_codes = RC_MAP_EVGA_INDTUBE,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = evga_indtube_analog,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = evga_indtube_analog,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = evga_indtube_analog,
} },
},
/* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
Infineon TUA6034) */
[EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
.name = "Reddo DVB-C USB TV Box",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = reddo_dvb_c_usb_box,
.has_dvb = 1,
},
/* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
* initially as the KWorld PlusTV 340U, then as the UB435-Q.
* Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
[EM2870_BOARD_KWORLD_A340] = {
.name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
.tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
.has_dvb = 1,
.dvb_gpio = kworld_a340_digital,
.tuner_gpio = default_tuner_gpio,
},
/* 2013:024f PCTV nanoStick T2 290e.
* Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
[EM28174_BOARD_PCTV_290E] = {
.name = "PCTV nanoStick T2 290e",
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_290e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
/* 2013:024f PCTV DVB-S2 Stick 460e
* Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
[EM28174_BOARD_PCTV_460E] = {
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
.name = "PCTV DVB-S2 Stick (460e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_460e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
/* eb1a:5006 Honestech VIDBOX NW03
* Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */
[EM2860_BOARD_HT_VIDBOX_NW03] = {
.name = "Honestech Vidbox NW03",
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */
.amux = EM28XX_AMUX_LINE_IN,
} },
},
/* 1b80:e425 MaxMedia UB425-TC
* Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */
[EM2874_BOARD_MAXMEDIA_UB425_TC] = {
.name = "MaxMedia UB425-TC",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = maxmedia_ub425_tc,
.has_dvb = 1,
.ir_codes = RC_MAP_REDDO,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/* 2304:0242 PCTV QuatroStick (510e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
[EM2884_BOARD_PCTV_510E] = {
.name = "PCTV QuatroStick (510e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_510e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/* 2013:0251 PCTV QuatroStick nano (520e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */
[EM2884_BOARD_PCTV_520E] = {
.name = "PCTV QuatroStick nano (520e)",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_520e,
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
[EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
.name = "Terratec Cinergy HTC USB XS",
.has_dvb = 1,
.ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
.tuner_type = TUNER_ABSENT,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
/* table of devices that work with this driver */
struct usb_device_id em28xx_id_table[] = {
{ USB_DEVICE(0xeb1a, 0x2750),
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2751),
.driver_info = EM2750_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2800),
.driver_info = EM2800_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2710),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2820),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2821),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2860),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2861),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2862),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2863),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2870),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2881),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2883),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2868),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2875),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0xe300),
.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
{ USB_DEVICE(0xeb1a, 0xe303),
.driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
{ USB_DEVICE(0xeb1a, 0xe305),
.driver_info = EM2880_BOARD_KWORLD_DVB_305U },
{ USB_DEVICE(0xeb1a, 0xe310),
.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
{ USB_DEVICE(0xeb1a, 0xa313),
.driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
{ USB_DEVICE(0xeb1a, 0xa316),
.driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
{ USB_DEVICE(0xeb1a, 0xe320),
.driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
{ USB_DEVICE(0xeb1a, 0xe323),
.driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
{ USB_DEVICE(0xeb1a, 0xe350),
.driver_info = EM2870_BOARD_KWORLD_350U },
{ USB_DEVICE(0xeb1a, 0xe355),
.driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0xeb1a, 0x2801),
.driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
{ USB_DEVICE(0xeb1a, 0xe357),
.driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0xeb1a, 0xe359),
.driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0x1b80, 0xe302),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
{ USB_DEVICE(0x1b80, 0xe304),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
{ USB_DEVICE(0x0ccd, 0x0036),
.driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
{ USB_DEVICE(0x0ccd, 0x004c),
.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
{ USB_DEVICE(0x0ccd, 0x004f),
.driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x005e),
.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0042),
.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
{ USB_DEVICE(0x0ccd, 0x0043),
.driver_info = EM2870_BOARD_TERRATEC_XS },
{ USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
{ USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
.driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
{ USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
.driver_info = EM2884_BOARD_TERRATEC_H5 },
{ USB_DEVICE(0x0ccd, 0x0084),
.driver_info = EM2860_BOARD_TERRATEC_AV350 },
{ USB_DEVICE(0x0ccd, 0x0096),
.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x0ccd, 0x10AF),
.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x0ccd, 0x00b2),
.driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
{ USB_DEVICE(0x0fd9, 0x0033),
.driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
{ USB_DEVICE(0x185b, 0x2870),
.driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
{ USB_DEVICE(0x185b, 0x2041),
.driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
{ USB_DEVICE(0x2040, 0x4200),
.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2040, 0x4201),
.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2040, 0x6500),
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
{ USB_DEVICE(0x2040, 0x6502),
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
{ USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x2040, 0x651f),
.driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
{ USB_DEVICE(0x0438, 0xb002),
.driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
{ USB_DEVICE(0x2001, 0xf112),
.driver_info = EM2820_BOARD_DLINK_USB_TV },
{ USB_DEVICE(0x2304, 0x0207),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x2304, 0x0208),
.driver_info = EM2820_BOARD_PINNACLE_USB_2 },
{ USB_DEVICE(0x2304, 0x021a),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x2304, 0x0226),
.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
{ USB_DEVICE(0x2304, 0x0227),
.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
{ USB_DEVICE(0x0413, 0x6023),
.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
{ USB_DEVICE(0x093b, 0xa003),
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x093b, 0xa005),
.driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
{ USB_DEVICE(0x04bb, 0x0515),
.driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
{ USB_DEVICE(0xeb1a, 0x50a6),
.driver_info = EM2860_BOARD_GADMEI_UTV330 },
{ USB_DEVICE(0x1b80, 0xa340),
.driver_info = EM2870_BOARD_KWORLD_A340 },
{ USB_DEVICE(0x2013, 0x024f),
.driver_info = EM28174_BOARD_PCTV_290E },
{ USB_DEVICE(0x2013, 0x024c),
.driver_info = EM28174_BOARD_PCTV_460E },
{ USB_DEVICE(0x2040, 0x1605),
.driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
{ USB_DEVICE(0x1b80, 0xe755),
.driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
{ USB_DEVICE(0xeb1a, 0x5006),
.driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
{ USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
.driver_info = EM2860_BOARD_EASYCAP },
{ USB_DEVICE(0x1b80, 0xe425),
.driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
{ USB_DEVICE(0x2304, 0x0242),
.driver_info = EM2884_BOARD_PCTV_510E },
{ USB_DEVICE(0x2013, 0x0251),
.driver_info = EM2884_BOARD_PCTV_520E },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
/*
* EEPROM hash table for devices with generic USB IDs
*/
static struct em28xx_hash_table em28xx_eeprom_hash[] = {
/* P/N: SA 60002070465 Tuner: TVF7533-MF */
{0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
{0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
{0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
{0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
};
/* I2C devicelist hash table for devices with generic USB IDs */
static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
{0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
{0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
};
/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
static unsigned short saa711x_addrs[] = {
0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
I2C_CLIENT_END };
static unsigned short tvp5150_addrs[] = {
0xb8 >> 1,
0xba >> 1,
I2C_CLIENT_END
};
static unsigned short msp3400_addrs[] = {
0x80 >> 1,
0x88 >> 1,
I2C_CLIENT_END
};
int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
{
struct em28xx_i2c_bus *i2c_bus = ptr;
struct em28xx *dev = i2c_bus->dev;
int rc = 0;
if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
return 0;
if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
return 0;
rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
return rc;
}
EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
static inline void em28xx_set_model(struct em28xx *dev)
{
dev->board = em28xx_boards[dev->model];
/* Those are the default values for the majority of boards
Use those values if not specified otherwise at boards entry
*/
if (!dev->board.xclk)
dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
EM28XX_XCLK_FREQUENCY_12MHZ;
if (!dev->board.i2c_speed)
dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ;
/* Should be initialized early, for I2C to work */
dev->def_i2c_bus = dev->board.def_i2c_bus;
}
/* Since em28xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs
*/
static void em28xx_pre_card_setup(struct em28xx *dev)
{
/* Set the initial XCLK and I2C clock values based on the board
definition */
em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
if (!dev->board.is_em2800)
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
msleep(50);
/* request some modules */
switch (dev->model) {
case EM2861_BOARD_PLEXTOR_PX_TV100U:
/* Sets the msp34xx I2S speed */
dev->i2s_speed = 2048000;
break;
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
msleep(10);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
msleep(10);
break;
case EM2870_BOARD_COMPRO_VIDEOMATE:
/* TODO: someone can do some cleanup here...
not everything's needed */
em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
msleep(10);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
msleep(10);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
mdelay(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
mdelay(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
mdelay(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
mdelay(70);
break;
case EM2870_BOARD_TERRATEC_XS_MT2060:
/* this device needs some gpio writes to get the DVB-T
demod work */
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
mdelay(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
break;
case EM2870_BOARD_PINNACLE_PCTV_DVB:
/* this device needs some gpio writes to get the
DVB-T demod work */
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
mdelay(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
mdelay(70);
break;
case EM2820_BOARD_GADMEI_UTV310:
case EM2820_BOARD_MSI_VOX_USB_2:
/* enables audio for that devices */
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
break;
case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
msleep(10);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
msleep(10);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
msleep(10);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
msleep(10);
break;
case EM2860_BOARD_KAIOMY_TVNPC_U2:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_regs(dev, 0x0d, "\x42", 1);
em28xx_write_regs(dev, 0x08, "\xfd", 1);
msleep(10);
em28xx_write_regs(dev, 0x08, "\xff", 1);
msleep(10);
em28xx_write_regs(dev, 0x08, "\x7f", 1);
msleep(10);
em28xx_write_regs(dev, 0x08, "\x6b", 1);
break;
case EM2860_BOARD_EASYCAP:
em28xx_write_regs(dev, 0x08, "\xf8", 1);
break;
case EM2820_BOARD_IODATA_GVMVP_SZ:
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
msleep(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
msleep(10);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
msleep(70);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
msleep(70);
break;
}
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
/* Unlock device */
em28xx_set_mode(dev, EM28XX_SUSPEND);
}
static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
{
memset(ctl, 0, sizeof(*ctl));
ctl->fname = XC2028_DEFAULT_FIRMWARE;
ctl->max_len = 64;
ctl->mts = em28xx_boards[dev->model].mts_firmware;
switch (dev->model) {
case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2882_BOARD_TERRATEC_HYBRID_XS:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
case EM2881_BOARD_PINNACLE_HYBRID_PRO:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
ctl->demod = XC3028_FE_DEFAULT;
break;
case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
ctl->demod = XC3028_FE_DEFAULT;
ctl->fname = XC3028L_DEFAULT_FIRMWARE;
break;
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
/* FIXME: Better to specify the needed IF */
ctl->demod = XC3028_FE_DEFAULT;
break;
case EM2883_BOARD_KWORLD_HYBRID_330U:
case EM2882_BOARD_DIKOM_DK300:
case EM2882_BOARD_KWORLD_VS_DVBT:
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC2028_DEFAULT_FIRMWARE;
break;
case EM2882_BOARD_EVGA_INDTUBE:
ctl->demod = XC3028_FE_CHINA;
ctl->fname = XC3028L_DEFAULT_FIRMWARE;
break;
default:
ctl->demod = XC3028_FE_OREN538;
}
}
static void em28xx_tuner_setup(struct em28xx *dev)
{
struct tuner_setup tun_setup;
struct v4l2_frequency f;
if (dev->tuner_type == TUNER_ABSENT)
return;
memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
tun_setup.tuner_callback = em28xx_tuner_callback;
if (dev->board.radio.type) {
tun_setup.type = dev->board.radio.type;
tun_setup.addr = dev->board.radio_addr;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
}
if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
tun_setup.type = dev->tuner_type;
tun_setup.addr = dev->tuner_addr;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
}
if (dev->tda9887_conf) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &dev->tda9887_conf;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
}
if (dev->tuner_type == TUNER_XC2028) {
struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
memset(&ctl, 0, sizeof(ctl));
em28xx_setup_xc3028(dev, &ctl);
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
}
/* configure tuner */
f.tuner = 0;
f.type = V4L2_TUNER_ANALOG_TV;
f.frequency = 9076; /* just a magic number */
dev->ctl_freq = f.frequency;
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
}
static int em28xx_hint_board(struct em28xx *dev)
{
int i;
if (dev->board.is_webcam) {
if (dev->em28xx_sensor == EM28XX_MT9V011) {
dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
} else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
dev->em28xx_sensor == EM28XX_MT9M111) {
dev->model = EM2750_BOARD_UNKNOWN;
}
/* FIXME: IMPROVE ! */
return 0;
}
/* HINT method: EEPROM
*
* This method works only for boards with eeprom.
* Uses a hash of all eeprom bytes. The hash should be
* unique for a vendor/tuner pair.
* There are a high chance that tuners for different
* video standards produce different hashes.
*/
for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
if (dev->hash == em28xx_eeprom_hash[i].hash) {
dev->model = em28xx_eeprom_hash[i].model;
dev->tuner_type = em28xx_eeprom_hash[i].tuner;
em28xx_errdev("Your board has no unique USB ID.\n");
em28xx_errdev("A hint were successfully done, "
"based on eeprom hash.\n");
em28xx_errdev("This method is not 100%% failproof.\n");
em28xx_errdev("If the board were missdetected, "
"please email this log to:\n");
em28xx_errdev("\tV4L Mailing List "
" <linux-media@vger.kernel.org>\n");
em28xx_errdev("Board detected as %s\n",
em28xx_boards[dev->model].name);
return 0;
}
}
/* HINT method: I2C attached devices
*
* This method works for all boards.
* Uses a hash of i2c scanned devices.
* Devices with the same i2c attached chips will
* be considered equal.
* This method is less precise than the eeprom one.
*/
/* user did not request i2c scanning => do it now */
if (!dev->i2c_hash)
em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
dev->model = em28xx_i2c_hash[i].model;
dev->tuner_type = em28xx_i2c_hash[i].tuner;
em28xx_errdev("Your board has no unique USB ID.\n");
em28xx_errdev("A hint were successfully done, "
"based on i2c devicelist hash.\n");
em28xx_errdev("This method is not 100%% failproof.\n");
em28xx_errdev("If the board were missdetected, "
"please email this log to:\n");
em28xx_errdev("\tV4L Mailing List "
" <linux-media@vger.kernel.org>\n");
em28xx_errdev("Board detected as %s\n",
em28xx_boards[dev->model].name);
return 0;
}
}
em28xx_errdev("Your board has no unique USB ID and thus need a "
"hint to be detected.\n");
em28xx_errdev("You may try to use card=<n> insmod option to "
"workaround that.\n");
em28xx_errdev("Please send an email with this log to:\n");
em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
em28xx_errdev("Here is a list of valid choices for the card=<n>"
" insmod option:\n");
for (i = 0; i < em28xx_bcount; i++) {
em28xx_errdev(" card=%d -> %s\n",
i, em28xx_boards[i].name);
}
return -1;
}
static void em28xx_card_setup(struct em28xx *dev)
{
/*
* If the device can be a webcam, seek for a sensor.
* If sensor is not found, then it isn't a webcam.
*/
if (dev->board.is_webcam) {
if (em28xx_detect_sensor(dev) < 0)
dev->board.is_webcam = 0;
else
dev->progressive = 1;
}
switch (dev->model) {
case EM2750_BOARD_UNKNOWN:
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
/*
* The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
*
* This occurs because they share identical USB vendor and
* product IDs.
*
* What we do here is look up the EEPROM hash of the K-WORLD
* and if it is found then we decide that we do not have
* a DIGIVOX and reset the device to the K-WORLD instead.
*
* This solution is only valid if they do not share eeprom
* hash identities which has not been determined as yet.
*/
if (em28xx_hint_board(dev) < 0)
em28xx_errdev("Board not discovered\n");
else {
em28xx_set_model(dev);
em28xx_pre_card_setup(dev);
}
break;
default:
em28xx_set_model(dev);
}
em28xx_info("Identified as %s (card=%d)\n",
dev->board.name, dev->model);
dev->tuner_type = em28xx_boards[dev->model].tuner_type;
if (em28xx_boards[dev->model].tuner_addr)
dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
if (em28xx_boards[dev->model].tda9887_conf)
dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
/* request some modules */
switch (dev->model) {
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
{
struct tveeprom tv;
if (dev->eedata == NULL)
break;
#if defined(CONFIG_MODULES) && defined(MODULE)
request_module("tveeprom");
#endif
/* Call first TVeeprom */
dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1;
tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata);
dev->tuner_type = tv.tuner_type;
if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
dev->i2s_speed = 2048000;
dev->board.has_msp34xx = 1;
}
break;
}
case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, 0x0d, 0x42);
msleep(10);
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
msleep(10);
break;
case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */
em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
break;
case EM2820_BOARD_UNKNOWN:
case EM2800_BOARD_UNKNOWN:
/*
* The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
*
* This occurs because they share identical USB vendor and
* product IDs.
*
* What we do here is look up the EEPROM hash of the K-WORLD
* and if it is found then we decide that we do not have
* a DIGIVOX and reset the device to the K-WORLD instead.
*
* This solution is only valid if they do not share eeprom
* hash identities which has not been determined as yet.
*/
case EM2880_BOARD_MSI_DIGIVOX_AD:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
/* In cases where we had to use a board hint, the call to
em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
so make the call now so the analog GPIOs are set properly
before probing the i2c bus. */
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
/*
* The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
*
* This occurs because they share identical USB vendor and
* product IDs.
*
* What we do here is look up the EEPROM hash of the Dikom
* and if it is found then we decide that we do not have
* a Kworld and reset the device to the Dikom instead.
*
* This solution is only valid if they do not share eeprom
* hash identities which has not been determined as yet.
*/
case EM2882_BOARD_KWORLD_VS_DVBT:
if (!em28xx_hint_board(dev))
em28xx_set_model(dev);
/* In cases where we had to use a board hint, the call to
em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
so make the call now so the analog GPIOs are set properly
before probing the i2c bus. */
em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
}
if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
em28xx_errdev("\n\n");
em28xx_errdev("The support for this board weren't "
"valid yet.\n");
em28xx_errdev("Please send a report of having this working\n");
em28xx_errdev("not to V4L mailing list (and/or to other "
"addresses)\n\n");
}
/* Free eeprom data memory */
kfree(dev->eedata);
dev->eedata = NULL;
/* Allow override tuner type by a module parameter */
if (tuner >= 0)
dev->tuner_type = tuner;
/* request some modules */
if (dev->board.has_msp34xx)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"msp3400", 0, msp3400_addrs);
if (dev->board.decoder == EM28XX_SAA711X)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"saa7115_auto", 0, saa711x_addrs);
if (dev->board.decoder == EM28XX_TVP5150)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tvp5150", 0, tvp5150_addrs);
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tvaudio", dev->board.tvaudio_addr, NULL);
if (dev->board.tuner_type != TUNER_ABSENT) {
int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tuner", dev->board.radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(type));
if (sd)
dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
"tuner", dev->tuner_addr, NULL);
}
}
em28xx_tuner_setup(dev);
em28xx_init_camera(dev);
}
static void request_module_async(struct work_struct *work)
{
struct em28xx *dev = container_of(work,
struct em28xx, request_module_wk);
/*
* The em28xx extensions can be modules or builtin. If the
* modules are already loaded or are built in, those extensions
* can be initialised right now. Otherwise, the module init
* code will do it.
*/
em28xx_init_extension(dev);
#if defined(CONFIG_MODULES) && defined(MODULE)
if (dev->has_audio_class)
request_module("snd-usb-audio");
else if (dev->has_alsa_audio)
request_module("em28xx-alsa");
if (dev->board.has_dvb)
request_module("em28xx-dvb");
if (dev->board.has_snapshot_button ||
((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
request_module("em28xx-rc");
#endif /* CONFIG_MODULES */
}
static void request_modules(struct em28xx *dev)
{
INIT_WORK(&dev->request_module_wk, request_module_async);
schedule_work(&dev->request_module_wk);
}
static void flush_request_modules(struct em28xx *dev)
{
flush_work(&dev->request_module_wk);
}
/*
* em28xx_release_resources()
* unregisters the v4l2,i2c and usb devices
* called when the device gets disconnected or at module unload
*/
void em28xx_release_resources(struct em28xx *dev)
{
/*FIXME: I2C IR should be disconnected */
em28xx_release_analog_resources(dev);
if (dev->def_i2c_bus)
em28xx_i2c_unregister(dev, 1);
em28xx_i2c_unregister(dev, 0);
v4l2_ctrl_handler_free(&dev->ctrl_handler);
v4l2_device_unregister(&dev->v4l2_dev);
usb_put_dev(dev->udev);
/* Mark device as unused */
clear_bit(dev->devno, &em28xx_devused);
};
/*
* em28xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
*/
static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
struct usb_interface *interface,
int minor)
{
struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
int retval;
static const char *default_chip_name = "em28xx";
const char *chip_name = default_chip_name;
dev->udev = udev;
mutex_init(&dev->vb_queue_lock);
mutex_init(&dev->vb_vbi_queue_lock);
mutex_init(&dev->ctrl_urb_lock);
spin_lock_init(&dev->slock);
dev->em28xx_write_regs = em28xx_write_regs;
dev->em28xx_read_reg = em28xx_read_reg;
dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
dev->em28xx_write_regs_req = em28xx_write_regs_req;
dev->em28xx_read_reg_req = em28xx_read_reg_req;
dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
em28xx_set_model(dev);
/* Set the default GPO/GPIO for legacy devices */
dev->reg_gpo_num = EM2880_R04_GPO;
dev->reg_gpio_num = EM28XX_R08_GPIO;
dev->wait_after_write = 5;
/* Based on the Chip ID, set the device configuration */
retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
if (retval > 0) {
dev->chip_id = retval;
switch (dev->chip_id) {
case CHIP_ID_EM2800:
chip_name = "em2800";
break;
case CHIP_ID_EM2710:
chip_name = "em2710";
break;
case CHIP_ID_EM2750:
chip_name = "em2750";
break;
case CHIP_ID_EM2765:
chip_name = "em2765";
dev->wait_after_write = 0;
dev->is_em25xx = 1;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM2820:
chip_name = "em2710/2820";
if (le16_to_cpu(dev->udev->descriptor.idVendor)
== 0xeb1a) {
__le16 idProd = dev->udev->descriptor.idProduct;
if (le16_to_cpu(idProd) == 0x2710)
chip_name = "em2710";
else if (le16_to_cpu(idProd) == 0x2820)
chip_name = "em2820";
}
/* NOTE: the em2820 is used in webcams, too ! */
break;
case CHIP_ID_EM2840:
chip_name = "em2840";
break;
case CHIP_ID_EM2860:
chip_name = "em2860";
break;
case CHIP_ID_EM2870:
chip_name = "em2870";
dev->wait_after_write = 0;
break;
case CHIP_ID_EM2874:
chip_name = "em2874";
dev->reg_gpio_num = EM2874_R80_GPIO;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM28174:
chip_name = "em28174";
dev->reg_gpio_num = EM2874_R80_GPIO;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
case CHIP_ID_EM2883:
chip_name = "em2882/3";
dev->wait_after_write = 0;
break;
case CHIP_ID_EM2884:
chip_name = "em2884";
dev->reg_gpio_num = EM2874_R80_GPIO;
dev->wait_after_write = 0;
dev->eeprom_addrwidth_16bit = 1;
break;
default:
printk(KERN_INFO DRIVER_NAME
": unknown em28xx chip ID (%d)\n", dev->chip_id);
}
}
if (chip_name != default_chip_name)
printk(KERN_INFO DRIVER_NAME
": chip ID is %s\n", chip_name);
/*
* For em2820/em2710, the name may change latter, after checking
* if the device has a sensor (so, it is em2710) or not.
*/
snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);
if (dev->is_audio_only) {
retval = em28xx_audio_setup(dev);
if (retval)
return -ENODEV;
em28xx_init_extension(dev);
return 0;
}
/* Prepopulate cached GPO register content */
retval = em28xx_read_reg(dev, dev->reg_gpo_num);
if (retval >= 0)
dev->reg_gpo = retval;
em28xx_pre_card_setup(dev);
if (!dev->board.is_em2800) {
/* Resets I2C speed */
retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
if (retval < 0) {
em28xx_errdev("%s: em28xx_write_reg failed!"
" retval [%d]\n",
__func__, retval);
return retval;
}
}
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval < 0) {
em28xx_errdev("Call to v4l2_device_register() failed!\n");
return retval;
}
v4l2_ctrl_handler_init(hdl, 8);
dev->v4l2_dev.ctrl_handler = hdl;
rt_mutex_init(&dev->i2c_bus_lock);
/* register i2c bus 0 */
if (dev->board.is_em2800)
retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
else
retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
if (retval < 0) {
em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
__func__, retval);
goto unregister_dev;
}
/* register i2c bus 1 */
if (dev->def_i2c_bus) {
if (dev->is_em25xx)
retval = em28xx_i2c_register(dev, 1,
EM28XX_I2C_ALGO_EM25XX_BUS_B);
else
retval = em28xx_i2c_register(dev, 1,
EM28XX_I2C_ALGO_EM28XX);
if (retval < 0) {
em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
__func__, retval);
goto unregister_dev;
}
}
/*
* Default format, used for tvp5150 or saa711x output formats
*/
dev->vinmode = 0x10;
dev->vinctl = EM28XX_VINCTRL_INTERLACED |
EM28XX_VINCTRL_CCIR656_ENABLE;
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
/* Configure audio */
retval = em28xx_audio_setup(dev);
if (retval < 0) {
em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
__func__, retval);
goto fail;
}
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f);
} else {
/* install the em28xx notify callback */
v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE),
em28xx_ctrl_notify, dev);
v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME),
em28xx_ctrl_notify, dev);
}
/* wake i2c devices */
em28xx_wake_i2c(dev);
/* init video dma queues */
INIT_LIST_HEAD(&dev->vidq.active);
INIT_LIST_HEAD(&dev->vbiq.active);
if (dev->board.has_msp34xx) {
/* Send a reset to other chips via gpio */
retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
if (retval < 0) {
em28xx_errdev("%s: em28xx_write_reg - "
"msp34xx(1) failed! error [%d]\n",
__func__, retval);
goto fail;
}
msleep(3);
retval = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
if (retval < 0) {
em28xx_errdev("%s: em28xx_write_reg - "
"msp34xx(2) failed! error [%d]\n",
__func__, retval);
goto fail;
}
msleep(3);
}
retval = em28xx_register_analog_devices(dev);
if (retval < 0) {
goto fail;
}
/* Save some power by putting tuner to sleep */
v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
return 0;
fail:
if (dev->def_i2c_bus)
em28xx_i2c_unregister(dev, 1);
em28xx_i2c_unregister(dev, 0);
v4l2_ctrl_handler_free(&dev->ctrl_handler);
unregister_dev:
v4l2_device_unregister(&dev->v4l2_dev);
return retval;
}
/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
/*
* em28xx_usb_probe()
* checks for supported devices
*/
static int em28xx_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_device *udev;
struct em28xx *dev = NULL;
int retval;
bool has_audio = false, has_video = false, has_dvb = false;
int i, nr, try_bulk;
const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
char *speed;
udev = usb_get_dev(interface_to_usbdev(interface));
/* Check to see next free device and mark as used */
do {
nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
if (nr >= EM28XX_MAXBOARDS) {
/* No free device slots */
printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
EM28XX_MAXBOARDS);
retval = -ENOMEM;
goto err_no_slot;
}
} while (test_and_set_bit(nr, &em28xx_devused));
/* Don't register audio interfaces */
if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
"interface %i, class %i\n",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
ifnum,
interface->altsetting[0].desc.bInterfaceClass);
retval = -ENODEV;
goto err;
}
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
em28xx_err(DRIVER_NAME ": out of memory!\n");
retval = -ENOMEM;
goto err;
}
/* compute alternate max packet sizes */
dev->alt_max_pkt_size_isoc =
kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) *
interface->num_altsetting, GFP_KERNEL);
if (dev->alt_max_pkt_size_isoc == NULL) {
em28xx_errdev("out of memory!\n");
kfree(dev);
retval = -ENOMEM;
goto err;
}
/* Get endpoints */
for (i = 0; i < interface->num_altsetting; i++) {
int ep;
for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
const struct usb_endpoint_descriptor *e;
int sizedescr, size;
e = &interface->altsetting[i].endpoint[ep].desc;
sizedescr = le16_to_cpu(e->wMaxPacketSize);
size = sizedescr & 0x7ff;
if (udev->speed == USB_SPEED_HIGH)
size = size * hb_mult(sizedescr);
if (usb_endpoint_dir_in(e)) {
switch (e->bEndpointAddress) {
case 0x82:
has_video = true;
if (usb_endpoint_xfer_isoc(e)) {
dev->analog_ep_isoc =
e->bEndpointAddress;
dev->alt_max_pkt_size_isoc[i] = size;
} else if (usb_endpoint_xfer_bulk(e)) {
dev->analog_ep_bulk =
e->bEndpointAddress;
}
break;
case 0x83:
if (usb_endpoint_xfer_isoc(e)) {
has_audio = true;
} else {
printk(KERN_INFO DRIVER_NAME
": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
}
break;
case 0x84:
if (has_video &&
(usb_endpoint_xfer_bulk(e))) {
dev->analog_ep_bulk =
e->bEndpointAddress;
} else {
if (usb_endpoint_xfer_isoc(e)) {
if (size > dev->dvb_max_pkt_size_isoc) {
has_dvb = true; /* see NOTE (~) */
dev->dvb_ep_isoc = e->bEndpointAddress;
dev->dvb_max_pkt_size_isoc = size;
dev->dvb_alt_isoc = i;
}
} else {
has_dvb = true;
dev->dvb_ep_bulk = e->bEndpointAddress;
}
}
break;
}
}
/* NOTE:
* Old logic with support for isoc transfers only was:
* 0x82 isoc => analog
* 0x83 isoc => audio
* 0x84 isoc => digital
*
* New logic with support for bulk transfers
* 0x82 isoc => analog
* 0x82 bulk => analog
* 0x83 isoc* => audio
* 0x84 isoc => digital
* 0x84 bulk => analog or digital**
* (*: audio should always be isoc)
* (**: analog, if ep 0x82 is isoc, otherwise digital)
*
* The new logic preserves backwards compatibility and
* reflects the endpoint configurations we have seen
* so far. But there might be devices for which this
* logic is not sufficient...
*/
/*
* NOTE (~): some manufacturers (e.g. Terratec) disable
* endpoints by setting wMaxPacketSize to 0 bytes for
* all alt settings. So far, we've seen this for
* DVB isoc endpoints only.
*/
}
}
if (!(has_audio || has_video || has_dvb)) {
retval = -ENODEV;
goto err_free;
}
switch (udev->speed) {
case USB_SPEED_LOW:
speed = "1.5";
break;
case USB_SPEED_UNKNOWN:
case USB_SPEED_FULL:
speed = "12";
break;
case USB_SPEED_HIGH:
speed = "480";
break;
default:
speed = "unknown";
}
printk(KERN_INFO DRIVER_NAME
": New device %s %s @ %s Mbps "
"(%04x:%04x, interface %d, class %d)\n",
udev->manufacturer ? udev->manufacturer : "",
udev->product ? udev->product : "",
speed,
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
ifnum,
interface->altsetting->desc.bInterfaceNumber);
/*
* Make sure we have 480 Mbps of bandwidth, otherwise things like
* video stream wouldn't likely work, since 12 Mbps is generally
* not enough even for most Digital TV streams.
*/
if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
printk(DRIVER_NAME ": Device initialization failed.\n");
printk(DRIVER_NAME ": Device must be connected to a high-speed"
" USB 2.0 port.\n");
retval = -ENODEV;
goto err_free;
}
dev->devno = nr;
dev->model = id->driver_info;
dev->alt = -1;
dev->is_audio_only = has_audio && !(has_video || has_dvb);
dev->has_alsa_audio = has_audio;
dev->audio_ifnum = ifnum;
/* Checks if audio is provided by some interface */
for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
struct usb_interface *uif = udev->config->interface[i];
if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
dev->has_audio_class = 1;
break;
}
}
if (has_audio)
printk(KERN_INFO DRIVER_NAME
": Audio interface %i found %s\n",
ifnum,
dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)");
if (has_video)
printk(KERN_INFO DRIVER_NAME
": Video interface %i found:%s%s\n",
ifnum,
dev->analog_ep_bulk ? " bulk" : "",
dev->analog_ep_isoc ? " isoc" : "");
if (has_dvb)
printk(KERN_INFO DRIVER_NAME
": DVB interface %i found:%s%s\n",
ifnum,
dev->dvb_ep_bulk ? " bulk" : "",
dev->dvb_ep_isoc ? " isoc" : "");
dev->num_alt = interface->num_altsetting;
if ((unsigned)card[nr] < em28xx_bcount)
dev->model = card[nr];
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
/* initialize videobuf2 stuff */
em28xx_vb2_setup(dev);
/* allocate device struct */
mutex_init(&dev->lock);
mutex_lock(&dev->lock);
retval = em28xx_init_dev(dev, udev, interface, nr);
if (retval) {
goto unlock_and_free;
}
if (usb_xfer_mode < 0) {
if (dev->board.is_webcam)
try_bulk = 1;
else
try_bulk = 0;
} else {
try_bulk = usb_xfer_mode > 0;
}
/* Select USB transfer types to use */
if (has_video) {
if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
dev->analog_xfer_bulk = 1;
em28xx_info("analog set to %s mode.\n",
dev->analog_xfer_bulk ? "bulk" : "isoc");
}
if (has_dvb) {
if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
dev->dvb_xfer_bulk = 1;
em28xx_info("dvb set to %s mode.\n",
dev->dvb_xfer_bulk ? "bulk" : "isoc");
/* pre-allocate DVB usb transfer buffers */
if (dev->dvb_xfer_bulk) {
retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE,
dev->dvb_xfer_bulk,
EM28XX_DVB_NUM_BUFS,
512,
EM28XX_DVB_BULK_PACKET_MULTIPLIER);
} else {
retval = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE,
dev->dvb_xfer_bulk,
EM28XX_DVB_NUM_BUFS,
dev->dvb_max_pkt_size_isoc,
EM28XX_DVB_NUM_ISOC_PACKETS);
}
if (retval) {
printk(DRIVER_NAME
": Failed to pre-allocate USB transfer buffers for DVB.\n");
goto unlock_and_free;
}
}
request_modules(dev);
/* Should be the last thing to do, to avoid newer udev's to
open the device before fully initializing it
*/
mutex_unlock(&dev->lock);
return 0;
unlock_and_free:
mutex_unlock(&dev->lock);
err_free:
kfree(dev->alt_max_pkt_size_isoc);
kfree(dev);
err:
clear_bit(nr, &em28xx_devused);
err_no_slot:
usb_put_dev(udev);
return retval;
}
/*
* em28xx_usb_disconnect()
* called when the device gets disconnected
* video device will be unregistered on v4l2_close in case it is still open
*/
static void em28xx_usb_disconnect(struct usb_interface *interface)
{
struct em28xx *dev;
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (!dev)
return;
dev->disconnected = 1;
if (dev->is_audio_only) {
mutex_lock(&dev->lock);
em28xx_close_extension(dev);
mutex_unlock(&dev->lock);
return;
}
em28xx_info("disconnecting %s\n", dev->vdev->name);
flush_request_modules(dev);
mutex_lock(&dev->lock);
v4l2_device_disconnect(&dev->v4l2_dev);
if (dev->users) {
em28xx_warn("device %s is open! Deregistration and memory deallocation are deferred on close.\n",
video_device_node_name(dev->vdev));
em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE);
}
em28xx_close_extension(dev);
/* NOTE: must be called BEFORE the resources are released */
if (!dev->users)
em28xx_release_resources(dev);
mutex_unlock(&dev->lock);
if (!dev->users) {
kfree(dev->alt_max_pkt_size_isoc);
kfree(dev);
}
}
static struct usb_driver em28xx_usb_driver = {
.name = "em28xx",
.probe = em28xx_usb_probe,
.disconnect = em28xx_usb_disconnect,
.id_table = em28xx_id_table,
};
module_usb_driver(em28xx_usb_driver);