| config SND_ATMEL_SOC |
| tristate "SoC Audio for the Atmel System-on-Chip" |
| depends on HAS_IOMEM |
| help |
| Say Y or M if you want to add support for codecs attached to |
| the ATMEL SSC interface. You will also need |
| to select the audio interfaces to support below. |
| |
| if SND_ATMEL_SOC |
| |
| config SND_ATMEL_SOC_PDC |
| tristate |
| depends on HAS_DMA |
| default m if SND_ATMEL_SOC_SSC_PDC=m && SND_ATMEL_SOC_SSC=m |
| default y if SND_ATMEL_SOC_SSC_PDC=y || (SND_ATMEL_SOC_SSC_PDC=m && SND_ATMEL_SOC_SSC=y) |
| |
| config SND_ATMEL_SOC_SSC_PDC |
| tristate |
| |
| config SND_ATMEL_SOC_DMA |
| tristate |
| select SND_SOC_GENERIC_DMAENGINE_PCM |
| default m if SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=m |
| default y if SND_ATMEL_SOC_SSC_DMA=y || (SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=y) |
| |
| config SND_ATMEL_SOC_SSC_DMA |
| tristate |
| select SND_ATMEL_SOC_DMA |
| select SND_ATMEL_SOC_PDC |
| |
| config SND_ATMEL_SOC_SSC |
| tristate |
| default y if SND_ATMEL_SOC_SSC_DMA=y || SND_ATMEL_SOC_SSC_PDC=y |
| default m if SND_ATMEL_SOC_SSC_DMA=m || SND_ATMEL_SOC_SSC_PDC=m |
| |
| config SND_AT91_SOC_SAM9G20_WM8731 |
| tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" |
| depends on ARCH_AT91 || COMPILE_TEST |
| depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI |
| select SND_ATMEL_SOC_SSC_PDC |
| select SND_SOC_WM8731 |
| help |
| Say Y if you want to add support for SoC audio on WM8731-based |
| AT91sam9g20 evaluation board. |
| |
| config SND_ATMEL_SOC_WM8904 |
| tristate "Atmel ASoC driver for boards using WM8904 codec" |
| depends on ARCH_AT91 || COMPILE_TEST |
| depends on ATMEL_SSC && I2C |
| select SND_ATMEL_SOC_SSC_DMA |
| select SND_SOC_WM8904 |
| help |
| Say Y if you want to add support for Atmel ASoC driver for boards using |
| WM8904 codec. |
| |
| config SND_AT91_SOC_SAM9X5_WM8731 |
| tristate "SoC Audio support for WM8731-based at91sam9x5 board" |
| depends on ARCH_AT91 || COMPILE_TEST |
| depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI |
| select SND_ATMEL_SOC_SSC_DMA |
| select SND_SOC_WM8731 |
| help |
| Say Y if you want to add support for audio SoC on an |
| at91sam9x5 based board that is using WM8731 codec. |
| |
| config SND_ATMEL_SOC_CLASSD |
| tristate "Atmel ASoC driver for boards using CLASSD" |
| depends on ARCH_AT91 || COMPILE_TEST |
| select SND_ATMEL_SOC_DMA |
| select REGMAP_MMIO |
| help |
| Say Y if you want to add support for Atmel ASoC driver for boards using |
| CLASSD. |
| |
| config SND_ATMEL_SOC_PDMIC |
| tristate "Atmel ASoC driver for boards using PDMIC" |
| depends on OF && (ARCH_AT91 || COMPILE_TEST) |
| select SND_SOC_GENERIC_DMAENGINE_PCM |
| select REGMAP_MMIO |
| help |
| Say Y if you want to add support for Atmel ASoC driver for boards using |
| PDMIC. |
| |
| config SND_ATMEL_SOC_TSE850_PCM5142 |
| tristate "ASoC driver for the Axentia TSE-850" |
| depends on ARCH_AT91 && OF |
| depends on ATMEL_SSC && I2C |
| select SND_ATMEL_SOC_SSC_DMA |
| select SND_SOC_PCM512x_I2C |
| help |
| Say Y if you want to add support for the ASoC driver for the |
| Axentia TSE-850 with a PCM5142 codec. |
| endif |