| /* linux/inclue/media/exynos_mc.h |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * header file for exynos media device driver |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef GSC_MDEVICE_H_ |
| #define GSC_MDEVICE_H_ |
| |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/mutex.h> |
| #include <linux/device.h> |
| #include <media/media-device.h> |
| #include <media/media-entity.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-subdev.h> |
| |
| #define err(fmt, args...) \ |
| printk(KERN_ERR "%s:%d: " fmt "\n", __func__, __LINE__, ##args) |
| |
| #define MDEV_MODULE_NAME "exynos-mdev" |
| #define MAX_GSC_SUBDEV 3 |
| #if defined(CONFIG_SOC_EXYNOS8890) |
| #define MAX_VPP_SUBDEV 9 |
| #else |
| #define MAX_VPP_SUBDEV 4 |
| #endif |
| #define MAX_DSIM_SUBDEV 2 |
| #define MDEV_MAX_NUM 3 |
| |
| #define VPP_PAD_SOURCE 0 |
| #define GSC_OUT_PAD_SINK 0 |
| #define GSC_OUT_PAD_SOURCE 1 |
| |
| #define GSC_CAP_PAD_SINK 0 |
| #define GSC_CAP_PAD_SOURCE 1 |
| |
| #define FLITE_PAD_SINK 0 |
| #define FLITE_PAD_SOURCE_PREV 1 |
| #define FLITE_PAD_SOURCE_CAMCORD 2 |
| #define FLITE_PAD_SOURCE_MEM 3 |
| #define FLITE_PADS_NUM 4 |
| |
| #define CSIS_PAD_SINK 0 |
| #define CSIS_PAD_SOURCE 1 |
| #define CSIS_PADS_NUM 2 |
| |
| #define MAX_CAMIF_CLIENTS 2 |
| #if defined(CONFIG_SOC_EXYNOS5410) |
| #define MAX_CAMIF_CHANNEL 3 |
| #else |
| #define MAX_CAMIF_CHANNEL 2 |
| #endif |
| |
| #define MXR_SUBDEV_NAME "s5p-mixer" |
| |
| #define GSC_MODULE_NAME "exynos-gsc" |
| #define GSC_SUBDEV_NAME "exynos-gsc-sd" |
| #define FIMD_MODULE_NAME "s5p-fimd1" |
| #define FIMD_ENTITY_NAME "s3c-fb-window" |
| #define FLITE_MODULE_NAME "exynos-fimc-lite" |
| #define CSIS_MODULE_NAME "s5p-mipi-csis" |
| #define DEX_WB_NAME "dex-wb-sd" |
| |
| #define GSC_CAP_GRP_ID (1 << 0) |
| #define FLITE_GRP_ID (1 << 1) |
| #define CSIS_GRP_ID (1 << 2) |
| #define SENSOR_GRP_ID (1 << 3) |
| #define FIMD_GRP_ID (1 << 4) |
| |
| #define SENSOR_MAX_ENTITIES MAX_CAMIF_CLIENTS |
| #define FLITE_MAX_ENTITIES MAX_CAMIF_CHANNEL |
| #define CSIS_MAX_ENTITIES MAX_CAMIF_CHANNEL |
| |
| enum decon_ioctl_for_sync { |
| S3CFB_FLUSH_WORKQUEUE, |
| S3CFB_DUMP_REGISTER, |
| }; |
| |
| enum gsc_ioctl_for_sync { |
| GSC_SFR_UPDATE, |
| GSC_WAIT_STOP, |
| }; |
| |
| enum vpp_sd_ioctl { |
| VPP_WIN_CONFIG, |
| VPP_STOP, |
| VPP_TUI_PROTECT, |
| VPP_GET_BTS_VAL, |
| VPP_SET_BW, |
| VPP_SET_ROT_MIF, |
| VPP_WAIT_FOR_UPDATE, |
| VPP_DUMP, |
| VPP_WAIT_IDLE, |
| VPP_WAIT_FOR_FRAMEDONE, |
| VPP_CFW_CONFIG, |
| }; |
| |
| enum mdev_node { |
| MDEV_OUTPUT, |
| MDEV_CAPTURE, |
| MDEV_ISP, |
| }; |
| |
| enum mxr_data_from { |
| FROM_GSC_SD, |
| FROM_MXR_VD, |
| }; |
| |
| struct exynos_media_ops { |
| int (*power_off)(struct v4l2_subdev *sd); |
| }; |
| |
| struct exynos_entity_data { |
| const struct exynos_media_ops *media_ops; |
| enum mxr_data_from mxr_data_from; |
| }; |
| |
| /** |
| * struct exynos_md - Exynos media device information |
| * @media_dev: top level media device |
| * @v4l2_dev: top level v4l2_device holding up the subdevs |
| * @pdev: platform device this media device is hooked up into |
| * @slock: spinlock protecting @sensor array |
| * @id: media device IDs |
| * @gsc_sd: each pointer of g-scaler's subdev array |
| */ |
| struct exynos_md { |
| struct media_device media_dev; |
| struct v4l2_device v4l2_dev; |
| struct platform_device *pdev; |
| struct v4l2_subdev *vpp_sd[MAX_VPP_SUBDEV]; |
| struct device *vpp_dev[MAX_VPP_SUBDEV]; |
| struct v4l2_subdev *gsc_sd[MAX_GSC_SUBDEV]; |
| struct v4l2_subdev *gsc_wb_sd; |
| struct v4l2_subdev *gsc_cap_sd[MAX_GSC_SUBDEV]; |
| struct v4l2_subdev *csis_sd[CSIS_MAX_ENTITIES]; |
| struct v4l2_subdev *flite_sd[FLITE_MAX_ENTITIES]; |
| struct v4l2_subdev *sensor_sd[SENSOR_MAX_ENTITIES]; |
| struct v4l2_subdev *dsim_sd[MAX_DSIM_SUBDEV]; |
| struct v4l2_subdev *hdmi_sd; |
| u16 id; |
| bool is_flite_on; |
| spinlock_t slock; |
| }; |
| |
| static int dummy_callback(struct device *dev, void *md) |
| { |
| /* non-zero return stops iteration */ |
| return -1; |
| } |
| |
| static inline void *module_name_to_driver_data(char *module_name) |
| { |
| struct device_driver *drv; |
| struct device *dev; |
| void *driver_data; |
| |
| drv = driver_find(module_name, &platform_bus_type); |
| if (drv) { |
| dev = driver_find_device(drv, NULL, NULL, dummy_callback); |
| driver_data = dev_get_drvdata(dev); |
| return driver_data; |
| } else |
| return NULL; |
| } |
| |
| /* print entity information for debug*/ |
| static inline void entity_info_print(struct media_entity *me, struct device *dev) |
| { |
| u16 num_pads = me->num_pads; |
| u16 num_links = me->num_links; |
| int i; |
| |
| dev_dbg(dev, "entity name : %s\n", me->name); |
| dev_dbg(dev, "number of pads = %d\n", num_pads); |
| for (i = 0; i < num_pads; ++i) { |
| dev_dbg(dev, "pad[%d] flag : %s\n", i, |
| (me->pads[i].flags == 1) ? "SINK" : "SOURCE"); |
| } |
| |
| dev_dbg(dev, "number of links = %d\n", num_links); |
| |
| for (i = 0; i < num_links; ++i) { |
| dev_dbg(dev, "link[%d] info = ", i); |
| dev_dbg(dev, "%s : %s[%d] ---> %s : %s[%d]\n", |
| me->links[i].source->entity->name, |
| me->links[i].source->flags == 1 ? "SINK" : "SOURCE", |
| me->links[i].source->index, |
| me->links[i].sink->entity->name, |
| me->links[i].sink->flags == 1 ? "SINK" : "SOURCE", |
| me->links[i].sink->index); |
| } |
| } |
| #endif |