| /* |
| * Copyright (C) 2007-2010 Advanced Micro Devices, Inc. |
| * Author: Joerg Roedel <joerg.roedel@amd.com> |
| * Leo Duran <leo.duran@amd.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #ifndef _ASM_X86_AMD_IOMMU_H |
| #define _ASM_X86_AMD_IOMMU_H |
| |
| #include <linux/types.h> |
| |
| /* |
| * This is mainly used to communicate information back-and-forth |
| * between SVM and IOMMU for setting up and tearing down posted |
| * interrupt |
| */ |
| struct amd_iommu_pi_data { |
| u32 ga_tag; |
| u32 prev_ga_tag; |
| u64 base; |
| bool is_guest_mode; |
| struct vcpu_data *vcpu_data; |
| void *ir_data; |
| }; |
| |
| #ifdef CONFIG_AMD_IOMMU |
| |
| struct task_struct; |
| struct pci_dev; |
| |
| extern int amd_iommu_detect(void); |
| extern int amd_iommu_init_hardware(void); |
| |
| /** |
| * amd_iommu_enable_device_erratum() - Enable erratum workaround for device |
| * in the IOMMUv2 driver |
| * @pdev: The PCI device the workaround is necessary for |
| * @erratum: The erratum workaround to enable |
| * |
| * The function needs to be called before amd_iommu_init_device(). |
| * Possible values for the erratum number are for now: |
| * - AMD_PRI_DEV_ERRATUM_ENABLE_RESET - Reset PRI capability when PRI |
| * is enabled |
| * - AMD_PRI_DEV_ERRATUM_LIMIT_REQ_ONE - Limit number of outstanding PRI |
| * requests to one |
| */ |
| #define AMD_PRI_DEV_ERRATUM_ENABLE_RESET 0 |
| #define AMD_PRI_DEV_ERRATUM_LIMIT_REQ_ONE 1 |
| |
| extern void amd_iommu_enable_device_erratum(struct pci_dev *pdev, u32 erratum); |
| |
| /** |
| * amd_iommu_init_device() - Init device for use with IOMMUv2 driver |
| * @pdev: The PCI device to initialize |
| * @pasids: Number of PASIDs to support for this device |
| * |
| * This function does all setup for the device pdev so that it can be |
| * used with IOMMUv2. |
| * Returns 0 on success or negative value on error. |
| */ |
| extern int amd_iommu_init_device(struct pci_dev *pdev, int pasids); |
| |
| /** |
| * amd_iommu_free_device() - Free all IOMMUv2 related device resources |
| * and disable IOMMUv2 usage for this device |
| * @pdev: The PCI device to disable IOMMUv2 usage for' |
| */ |
| extern void amd_iommu_free_device(struct pci_dev *pdev); |
| |
| /** |
| * amd_iommu_bind_pasid() - Bind a given task to a PASID on a device |
| * @pdev: The PCI device to bind the task to |
| * @pasid: The PASID on the device the task should be bound to |
| * @task: the task to bind |
| * |
| * The function returns 0 on success or a negative value on error. |
| */ |
| extern int amd_iommu_bind_pasid(struct pci_dev *pdev, int pasid, |
| struct task_struct *task); |
| |
| /** |
| * amd_iommu_unbind_pasid() - Unbind a PASID from its task on |
| * a device |
| * @pdev: The device of the PASID |
| * @pasid: The PASID to unbind |
| * |
| * When this function returns the device is no longer using the PASID |
| * and the PASID is no longer bound to its task. |
| */ |
| extern void amd_iommu_unbind_pasid(struct pci_dev *pdev, int pasid); |
| |
| /** |
| * amd_iommu_set_invalid_ppr_cb() - Register a call-back for failed |
| * PRI requests |
| * @pdev: The PCI device the call-back should be registered for |
| * @cb: The call-back function |
| * |
| * The IOMMUv2 driver invokes this call-back when it is unable to |
| * successfully handle a PRI request. The device driver can then decide |
| * which PRI response the device should see. Possible return values for |
| * the call-back are: |
| * |
| * - AMD_IOMMU_INV_PRI_RSP_SUCCESS - Send SUCCESS back to the device |
| * - AMD_IOMMU_INV_PRI_RSP_INVALID - Send INVALID back to the device |
| * - AMD_IOMMU_INV_PRI_RSP_FAIL - Send Failure back to the device, |
| * the device is required to disable |
| * PRI when it receives this response |
| * |
| * The function returns 0 on success or negative value on error. |
| */ |
| #define AMD_IOMMU_INV_PRI_RSP_SUCCESS 0 |
| #define AMD_IOMMU_INV_PRI_RSP_INVALID 1 |
| #define AMD_IOMMU_INV_PRI_RSP_FAIL 2 |
| |
| typedef int (*amd_iommu_invalid_ppr_cb)(struct pci_dev *pdev, |
| int pasid, |
| unsigned long address, |
| u16); |
| |
| extern int amd_iommu_set_invalid_ppr_cb(struct pci_dev *pdev, |
| amd_iommu_invalid_ppr_cb cb); |
| |
| #define PPR_FAULT_EXEC (1 << 1) |
| #define PPR_FAULT_READ (1 << 2) |
| #define PPR_FAULT_WRITE (1 << 5) |
| #define PPR_FAULT_USER (1 << 6) |
| #define PPR_FAULT_RSVD (1 << 7) |
| #define PPR_FAULT_GN (1 << 8) |
| |
| /** |
| * amd_iommu_device_info() - Get information about IOMMUv2 support of a |
| * PCI device |
| * @pdev: PCI device to query information from |
| * @info: A pointer to an amd_iommu_device_info structure which will contain |
| * the information about the PCI device |
| * |
| * Returns 0 on success, negative value on error |
| */ |
| |
| #define AMD_IOMMU_DEVICE_FLAG_ATS_SUP 0x1 /* ATS feature supported */ |
| #define AMD_IOMMU_DEVICE_FLAG_PRI_SUP 0x2 /* PRI feature supported */ |
| #define AMD_IOMMU_DEVICE_FLAG_PASID_SUP 0x4 /* PASID context supported */ |
| #define AMD_IOMMU_DEVICE_FLAG_EXEC_SUP 0x8 /* Device may request execution |
| on memory pages */ |
| #define AMD_IOMMU_DEVICE_FLAG_PRIV_SUP 0x10 /* Device may request |
| super-user privileges */ |
| |
| struct amd_iommu_device_info { |
| int max_pasids; |
| u32 flags; |
| }; |
| |
| extern int amd_iommu_device_info(struct pci_dev *pdev, |
| struct amd_iommu_device_info *info); |
| |
| /** |
| * amd_iommu_set_invalidate_ctx_cb() - Register a call-back for invalidating |
| * a pasid context. This call-back is |
| * invoked when the IOMMUv2 driver needs to |
| * invalidate a PASID context, for example |
| * because the task that is bound to that |
| * context is about to exit. |
| * |
| * @pdev: The PCI device the call-back should be registered for |
| * @cb: The call-back function |
| */ |
| |
| typedef void (*amd_iommu_invalidate_ctx)(struct pci_dev *pdev, int pasid); |
| |
| extern int amd_iommu_set_invalidate_ctx_cb(struct pci_dev *pdev, |
| amd_iommu_invalidate_ctx cb); |
| #else /* CONFIG_AMD_IOMMU */ |
| |
| static inline int amd_iommu_detect(void) { return -ENODEV; } |
| |
| #endif /* CONFIG_AMD_IOMMU */ |
| |
| #if defined(CONFIG_AMD_IOMMU) && defined(CONFIG_IRQ_REMAP) |
| |
| /* IOMMU AVIC Function */ |
| extern int amd_iommu_register_ga_log_notifier(int (*notifier)(u32)); |
| |
| extern int |
| amd_iommu_update_ga(int cpu, bool is_run, void *data); |
| |
| #else /* defined(CONFIG_AMD_IOMMU) && defined(CONFIG_IRQ_REMAP) */ |
| |
| static inline int |
| amd_iommu_register_ga_log_notifier(int (*notifier)(u32)) |
| { |
| return 0; |
| } |
| |
| static inline int |
| amd_iommu_update_ga(int cpu, bool is_run, void *data) |
| { |
| return 0; |
| } |
| |
| #endif /* defined(CONFIG_AMD_IOMMU) && defined(CONFIG_IRQ_REMAP) */ |
| |
| #endif /* _ASM_X86_AMD_IOMMU_H */ |