| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2007-2017 Cavium, Inc. |
| */ |
| #include <asm/asm.h> |
| #include <asm/regdef.h> |
| |
| #define CVMSEG_BASE -32768 |
| #define CVMSEG_SIZE 6912 |
| #define SAVE_REG(r) sd $r, CVMSEG_BASE + CVMSEG_SIZE - ((32 - r) * 8)($0) |
| |
| NESTED(octeon_wdt_nmi_stage2, 0, sp) |
| .set push |
| .set noreorder |
| .set noat |
| /* Clear Dcache so cvmseg works right. */ |
| cache 1,0($0) |
| /* Use K0 to do a read/modify/write of CVMMEMCTL */ |
| dmfc0 k0, $11, 7 |
| /* Clear out the size of CVMSEG */ |
| dins k0, $0, 0, 6 |
| /* Set CVMSEG to its largest value */ |
| ori k0, k0, 0x1c0 | 54 |
| /* Store the CVMMEMCTL value */ |
| dmtc0 k0, $11, 7 |
| /* |
| * Restore K0 from the debug scratch register, it was saved in |
| * the boot-vector code. |
| */ |
| dmfc0 k0, $31 |
| |
| /* |
| * Save all registers to the top CVMSEG. This shouldn't |
| * corrupt any state used by the kernel. Also all registers |
| * should have the value right before the NMI. |
| */ |
| SAVE_REG(0) |
| SAVE_REG(1) |
| SAVE_REG(2) |
| SAVE_REG(3) |
| SAVE_REG(4) |
| SAVE_REG(5) |
| SAVE_REG(6) |
| SAVE_REG(7) |
| SAVE_REG(8) |
| SAVE_REG(9) |
| SAVE_REG(10) |
| SAVE_REG(11) |
| SAVE_REG(12) |
| SAVE_REG(13) |
| SAVE_REG(14) |
| SAVE_REG(15) |
| SAVE_REG(16) |
| SAVE_REG(17) |
| SAVE_REG(18) |
| SAVE_REG(19) |
| SAVE_REG(20) |
| SAVE_REG(21) |
| SAVE_REG(22) |
| SAVE_REG(23) |
| SAVE_REG(24) |
| SAVE_REG(25) |
| SAVE_REG(26) |
| SAVE_REG(27) |
| SAVE_REG(28) |
| SAVE_REG(29) |
| SAVE_REG(30) |
| SAVE_REG(31) |
| /* Write zero to all CVMSEG locations per Core-15169 */ |
| dli a0, CVMSEG_SIZE - (33 * 8) |
| 1: sd zero, CVMSEG_BASE(a0) |
| daddiu a0, a0, -8 |
| bgez a0, 1b |
| nop |
| /* Set the stack to begin right below the registers */ |
| dli sp, CVMSEG_BASE + CVMSEG_SIZE - (32 * 8) |
| /* Load the address of the third stage handler */ |
| dla $25, octeon_wdt_nmi_stage3 |
| /* Call the third stage handler */ |
| jal $25 |
| /* a0 is the address of the saved registers */ |
| move a0, sp |
| /* Loop forvever if we get here. */ |
| 2: b 2b |
| nop |
| .set pop |
| END(octeon_wdt_nmi_stage2) |