| /* |
| * coh901327_wdt.c |
| * |
| * Copyright (C) 2008-2009 ST-Ericsson AB |
| * License terms: GNU General Public License (GPL) version 2 |
| * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core |
| * Author: Linus Walleij <linus.walleij@stericsson.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/watchdog.h> |
| #include <linux/interrupt.h> |
| #include <linux/pm.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| |
| #define DRV_NAME "WDOG COH 901 327" |
| |
| /* |
| * COH 901 327 register definitions |
| */ |
| |
| /* WDOG_FEED Register 32bit (-/W) */ |
| #define U300_WDOG_FR 0x00 |
| #define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU |
| /* WDOG_TIMEOUT Register 32bit (R/W) */ |
| #define U300_WDOG_TR 0x04 |
| #define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU |
| /* WDOG_DISABLE1 Register 32bit (-/W) */ |
| #define U300_WDOG_D1R 0x08 |
| #define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU |
| /* WDOG_DISABLE2 Register 32bit (R/W) */ |
| #define U300_WDOG_D2R 0x0C |
| #define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU |
| #define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU |
| #define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U |
| /* WDOG_STATUS Register 32bit (R/W) */ |
| #define U300_WDOG_SR 0x10 |
| #define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U |
| #define U300_WDOG_SR_STATUS_NORMAL 0x0000U |
| #define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U |
| /* WDOG_COUNT Register 32bit (R/-) */ |
| #define U300_WDOG_CR 0x14 |
| #define U300_WDOG_CR_VALID_IND 0x8000U |
| #define U300_WDOG_CR_VALID_STABLE 0x0000U |
| #define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU |
| /* WDOG_JTAGOVR Register 32bit (R/W) */ |
| #define U300_WDOG_JOR 0x18 |
| #define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U |
| #define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U |
| /* WDOG_RESTART Register 32bit (-/W) */ |
| #define U300_WDOG_RR 0x1C |
| #define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU |
| /* WDOG_IRQ_EVENT Register 32bit (R/W) */ |
| #define U300_WDOG_IER 0x20 |
| #define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U |
| #define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U |
| /* WDOG_IRQ_MASK Register 32bit (R/W) */ |
| #define U300_WDOG_IMR 0x24 |
| #define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U |
| /* WDOG_IRQ_FORCE Register 32bit (R/W) */ |
| #define U300_WDOG_IFR 0x28 |
| #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U |
| |
| /* Default timeout in seconds = 1 minute */ |
| static unsigned int margin = 60; |
| static int irq; |
| static void __iomem *virtbase; |
| static struct device *parent; |
| |
| static struct clk *clk; |
| |
| /* |
| * Enabling and disabling functions. |
| */ |
| static void coh901327_enable(u16 timeout) |
| { |
| u16 val; |
| unsigned long freq; |
| unsigned long delay_ns; |
| |
| /* Restart timer if it is disabled */ |
| val = readw(virtbase + U300_WDOG_D2R); |
| if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED) |
| writew(U300_WDOG_RR_RESTART_VALUE_RESUME, |
| virtbase + U300_WDOG_RR); |
| /* Acknowledge any pending interrupt so it doesn't just fire off */ |
| writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE, |
| virtbase + U300_WDOG_IER); |
| /* |
| * The interrupt is cleared in the 32 kHz clock domain. |
| * Wait 3 32 kHz cycles for it to take effect |
| */ |
| freq = clk_get_rate(clk); |
| delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */ |
| delay_ns = 3 * delay_ns; /* Wait 3 cycles */ |
| ndelay(delay_ns); |
| /* Enable the watchdog interrupt */ |
| writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR); |
| /* Activate the watchdog timer */ |
| writew(timeout, virtbase + U300_WDOG_TR); |
| /* Start the watchdog timer */ |
| writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR); |
| /* |
| * Extra read so that this change propagate in the watchdog. |
| */ |
| (void) readw(virtbase + U300_WDOG_CR); |
| val = readw(virtbase + U300_WDOG_D2R); |
| if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED) |
| dev_err(parent, |
| "%s(): watchdog not enabled! D2R value %04x\n", |
| __func__, val); |
| } |
| |
| static void coh901327_disable(void) |
| { |
| u16 val; |
| |
| /* Disable the watchdog interrupt if it is active */ |
| writew(0x0000U, virtbase + U300_WDOG_IMR); |
| /* If the watchdog is currently enabled, attempt to disable it */ |
| val = readw(virtbase + U300_WDOG_D2R); |
| if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) { |
| writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER, |
| virtbase + U300_WDOG_D1R); |
| writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER, |
| virtbase + U300_WDOG_D2R); |
| /* Write this twice (else problems occur) */ |
| writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER, |
| virtbase + U300_WDOG_D2R); |
| } |
| val = readw(virtbase + U300_WDOG_D2R); |
| if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) |
| dev_err(parent, |
| "%s(): watchdog not disabled! D2R value %04x\n", |
| __func__, val); |
| } |
| |
| static int coh901327_start(struct watchdog_device *wdt_dev) |
| { |
| coh901327_enable(wdt_dev->timeout * 100); |
| return 0; |
| } |
| |
| static int coh901327_stop(struct watchdog_device *wdt_dev) |
| { |
| coh901327_disable(); |
| return 0; |
| } |
| |
| static int coh901327_ping(struct watchdog_device *wdd) |
| { |
| /* Feed the watchdog */ |
| writew(U300_WDOG_FR_FEED_RESTART_TIMER, |
| virtbase + U300_WDOG_FR); |
| return 0; |
| } |
| |
| static int coh901327_settimeout(struct watchdog_device *wdt_dev, |
| unsigned int time) |
| { |
| wdt_dev->timeout = time; |
| /* Set new timeout value */ |
| writew(time * 100, virtbase + U300_WDOG_TR); |
| /* Feed the dog */ |
| writew(U300_WDOG_FR_FEED_RESTART_TIMER, |
| virtbase + U300_WDOG_FR); |
| return 0; |
| } |
| |
| static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev) |
| { |
| u16 val; |
| |
| /* Read repeatedly until the value is stable! */ |
| val = readw(virtbase + U300_WDOG_CR); |
| while (val & U300_WDOG_CR_VALID_IND) |
| val = readw(virtbase + U300_WDOG_CR); |
| val &= U300_WDOG_CR_COUNT_VALUE_MASK; |
| if (val != 0) |
| val /= 100; |
| |
| return val; |
| } |
| |
| /* |
| * This interrupt occurs 10 ms before the watchdog WILL bark. |
| */ |
| static irqreturn_t coh901327_interrupt(int irq, void *data) |
| { |
| u16 val; |
| |
| /* |
| * Ack IRQ? If this occurs we're FUBAR anyway, so |
| * just acknowledge, disable the interrupt and await the imminent end. |
| * If you at some point need a host of callbacks to be called |
| * when the system is about to watchdog-reset, add them here! |
| * |
| * NOTE: on future versions of this IP-block, it will be possible |
| * to prevent a watchdog reset by feeding the watchdog at this |
| * point. |
| */ |
| val = readw(virtbase + U300_WDOG_IER); |
| if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND) |
| writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE, |
| virtbase + U300_WDOG_IER); |
| writew(0x0000U, virtbase + U300_WDOG_IMR); |
| dev_crit(parent, "watchdog is barking!\n"); |
| return IRQ_HANDLED; |
| } |
| |
| static const struct watchdog_info coh901327_ident = { |
| .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, |
| .identity = DRV_NAME, |
| }; |
| |
| static const struct watchdog_ops coh901327_ops = { |
| .owner = THIS_MODULE, |
| .start = coh901327_start, |
| .stop = coh901327_stop, |
| .ping = coh901327_ping, |
| .set_timeout = coh901327_settimeout, |
| .get_timeleft = coh901327_gettimeleft, |
| }; |
| |
| static struct watchdog_device coh901327_wdt = { |
| .info = &coh901327_ident, |
| .ops = &coh901327_ops, |
| /* |
| * Max timeout is 327 since the 10ms |
| * timeout register is max |
| * 0x7FFF = 327670ms ~= 327s. |
| */ |
| .min_timeout = 0, |
| .max_timeout = 327, |
| }; |
| |
| static int __exit coh901327_remove(struct platform_device *pdev) |
| { |
| watchdog_unregister_device(&coh901327_wdt); |
| coh901327_disable(); |
| free_irq(irq, pdev); |
| clk_disable_unprepare(clk); |
| clk_put(clk); |
| return 0; |
| } |
| |
| static int __init coh901327_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| int ret; |
| u16 val; |
| struct resource *res; |
| |
| parent = dev; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| virtbase = devm_ioremap_resource(dev, res); |
| if (IS_ERR(virtbase)) |
| return PTR_ERR(virtbase); |
| |
| clk = clk_get(dev, NULL); |
| if (IS_ERR(clk)) { |
| ret = PTR_ERR(clk); |
| dev_err(dev, "could not get clock\n"); |
| return ret; |
| } |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| dev_err(dev, "could not prepare and enable clock\n"); |
| goto out_no_clk_enable; |
| } |
| |
| val = readw(virtbase + U300_WDOG_SR); |
| switch (val) { |
| case U300_WDOG_SR_STATUS_TIMED_OUT: |
| dev_info(dev, "watchdog timed out since last chip reset!\n"); |
| coh901327_wdt.bootstatus |= WDIOF_CARDRESET; |
| /* Status will be cleared below */ |
| break; |
| case U300_WDOG_SR_STATUS_NORMAL: |
| dev_info(dev, "in normal status, no timeouts have occurred.\n"); |
| break; |
| default: |
| dev_info(dev, "contains an illegal status code (%08x)\n", val); |
| break; |
| } |
| |
| val = readw(virtbase + U300_WDOG_D2R); |
| switch (val) { |
| case U300_WDOG_D2R_DISABLE_STATUS_DISABLED: |
| dev_info(dev, "currently disabled.\n"); |
| break; |
| case U300_WDOG_D2R_DISABLE_STATUS_ENABLED: |
| dev_info(dev, "currently enabled! (disabling it now)\n"); |
| coh901327_disable(); |
| break; |
| default: |
| dev_err(dev, "contains an illegal enable/disable code (%08x)\n", |
| val); |
| break; |
| } |
| |
| /* Reset the watchdog */ |
| writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (request_irq(irq, coh901327_interrupt, 0, |
| DRV_NAME " Bark", pdev)) { |
| ret = -EIO; |
| goto out_no_irq; |
| } |
| |
| ret = watchdog_init_timeout(&coh901327_wdt, margin, dev); |
| if (ret < 0) |
| coh901327_wdt.timeout = 60; |
| |
| coh901327_wdt.parent = dev; |
| ret = watchdog_register_device(&coh901327_wdt); |
| if (ret) |
| goto out_no_wdog; |
| |
| dev_info(dev, "initialized. timer margin=%d sec\n", margin); |
| return 0; |
| |
| out_no_wdog: |
| free_irq(irq, pdev); |
| out_no_irq: |
| clk_disable_unprepare(clk); |
| out_no_clk_enable: |
| clk_put(clk); |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static u16 wdogenablestore; |
| static u16 irqmaskstore; |
| |
| static int coh901327_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U; |
| wdogenablestore = readw(virtbase + U300_WDOG_D2R); |
| /* If watchdog is on, disable it here and now */ |
| if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) |
| coh901327_disable(); |
| return 0; |
| } |
| |
| static int coh901327_resume(struct platform_device *pdev) |
| { |
| /* Restore the watchdog interrupt */ |
| writew(irqmaskstore, virtbase + U300_WDOG_IMR); |
| if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) { |
| /* Restart the watchdog timer */ |
| writew(U300_WDOG_RR_RESTART_VALUE_RESUME, |
| virtbase + U300_WDOG_RR); |
| writew(U300_WDOG_FR_FEED_RESTART_TIMER, |
| virtbase + U300_WDOG_FR); |
| } |
| return 0; |
| } |
| #else |
| #define coh901327_suspend NULL |
| #define coh901327_resume NULL |
| #endif |
| |
| /* |
| * Mistreating the watchdog is the only way to perform a software reset of the |
| * system on EMP platforms. So we implement this and export a symbol for it. |
| */ |
| void coh901327_watchdog_reset(void) |
| { |
| /* Enable even if on JTAG too */ |
| writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE, |
| virtbase + U300_WDOG_JOR); |
| /* |
| * Timeout = 5s, we have to wait for the watchdog reset to |
| * actually take place: the watchdog will be reloaded with the |
| * default value immediately, so we HAVE to reboot and get back |
| * into the kernel in 30s, or the device will reboot again! |
| * The boot loader will typically deactivate the watchdog, so we |
| * need time enough for the boot loader to get to the point of |
| * deactivating the watchdog before it is shut down by it. |
| * |
| * NOTE: on future versions of the watchdog, this restriction is |
| * gone: the watchdog will be reloaded with a default value (1 min) |
| * instead of last value, and you can conveniently set the watchdog |
| * timeout to 10ms (value = 1) without any problems. |
| */ |
| coh901327_enable(500); |
| /* Return and await doom */ |
| } |
| |
| static const struct of_device_id coh901327_dt_match[] = { |
| { .compatible = "stericsson,coh901327" }, |
| {}, |
| }; |
| |
| static struct platform_driver coh901327_driver = { |
| .driver = { |
| .name = "coh901327_wdog", |
| .of_match_table = coh901327_dt_match, |
| }, |
| .remove = __exit_p(coh901327_remove), |
| .suspend = coh901327_suspend, |
| .resume = coh901327_resume, |
| }; |
| |
| module_platform_driver_probe(coh901327_driver, coh901327_probe); |
| |
| MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); |
| MODULE_DESCRIPTION("COH 901 327 Watchdog"); |
| |
| module_param(margin, uint, 0); |
| MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)"); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:coh901327-watchdog"); |