| /* |
| * Copyright (C) 2010 Google, Inc. |
| * Copyright (C) 2013 NVIDIA Corporation |
| * |
| * Author: |
| * Erik Gilling <konkers@google.com> |
| * Benoit Goby <benoit@android.com> |
| * Venu Byravarasu <vbyravarasu@nvidia.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/resource.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/export.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/ulpi.h> |
| #include <linux/usb/of.h> |
| #include <linux/usb/ehci_def.h> |
| #include <linux/usb/tegra_usb_phy.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define ULPI_VIEWPORT 0x170 |
| |
| /* PORTSC PTS/PHCD bits, Tegra20 only */ |
| #define TEGRA_USB_PORTSC1 0x184 |
| #define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30) |
| #define TEGRA_USB_PORTSC1_PHCD (1 << 23) |
| |
| /* HOSTPC1 PTS/PHCD bits, Tegra30 and above */ |
| #define TEGRA_USB_HOSTPC1_DEVLC 0x1b4 |
| #define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29) |
| #define TEGRA_USB_HOSTPC1_DEVLC_PHCD (1 << 22) |
| |
| /* Bits of PORTSC1, which will get cleared by writing 1 into them */ |
| #define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) |
| |
| #define USB_SUSP_CTRL 0x400 |
| #define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) |
| #define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) |
| #define USB_SUSP_CLR (1 << 5) |
| #define USB_PHY_CLK_VALID (1 << 7) |
| #define UTMIP_RESET (1 << 11) |
| #define UHSIC_RESET (1 << 11) |
| #define UTMIP_PHY_ENABLE (1 << 12) |
| #define ULPI_PHY_ENABLE (1 << 13) |
| #define USB_SUSP_SET (1 << 14) |
| #define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) |
| |
| #define USB1_LEGACY_CTRL 0x410 |
| #define USB1_NO_LEGACY_MODE (1 << 0) |
| #define USB1_VBUS_SENSE_CTL_MASK (3 << 1) |
| #define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) |
| #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ |
| (1 << 1) |
| #define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) |
| #define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) |
| |
| #define ULPI_TIMING_CTRL_0 0x424 |
| #define ULPI_OUTPUT_PINMUX_BYP (1 << 10) |
| #define ULPI_CLKOUT_PINMUX_BYP (1 << 11) |
| |
| #define ULPI_TIMING_CTRL_1 0x428 |
| #define ULPI_DATA_TRIMMER_LOAD (1 << 0) |
| #define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) |
| #define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) |
| #define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) |
| #define ULPI_DIR_TRIMMER_LOAD (1 << 24) |
| #define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) |
| |
| #define UTMIP_PLL_CFG1 0x804 |
| #define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) |
| #define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) |
| |
| #define UTMIP_XCVR_CFG0 0x808 |
| #define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) |
| #define UTMIP_XCVR_SETUP_MSB(x) ((((x) & 0x70) >> 4) << 22) |
| #define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) |
| #define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) |
| #define UTMIP_FORCE_PD_POWERDOWN (1 << 14) |
| #define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) |
| #define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) |
| #define UTMIP_XCVR_LSBIAS_SEL (1 << 21) |
| #define UTMIP_XCVR_HSSLEW(x) (((x) & 0x3) << 4) |
| #define UTMIP_XCVR_HSSLEW_MSB(x) ((((x) & 0x1fc) >> 2) << 25) |
| |
| #define UTMIP_BIAS_CFG0 0x80c |
| #define UTMIP_OTGPD (1 << 11) |
| #define UTMIP_BIASPD (1 << 10) |
| #define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0) |
| #define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2) |
| #define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24) |
| |
| #define UTMIP_HSRX_CFG0 0x810 |
| #define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) |
| #define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) |
| |
| #define UTMIP_HSRX_CFG1 0x814 |
| #define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) |
| |
| #define UTMIP_TX_CFG0 0x820 |
| #define UTMIP_FS_PREABMLE_J (1 << 19) |
| #define UTMIP_HS_DISCON_DISABLE (1 << 8) |
| |
| #define UTMIP_MISC_CFG0 0x824 |
| #define UTMIP_DPDM_OBSERVE (1 << 26) |
| #define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) |
| #define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) |
| #define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) |
| |
| #define UTMIP_MISC_CFG1 0x828 |
| #define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) |
| #define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) |
| |
| #define UTMIP_DEBOUNCE_CFG0 0x82c |
| #define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) |
| |
| #define UTMIP_BAT_CHRG_CFG0 0x830 |
| #define UTMIP_PD_CHRG (1 << 0) |
| |
| #define UTMIP_SPARE_CFG0 0x834 |
| #define FUSE_SETUP_SEL (1 << 3) |
| |
| #define UTMIP_XCVR_CFG1 0x838 |
| #define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) |
| #define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) |
| #define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) |
| #define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) |
| |
| #define UTMIP_BIAS_CFG1 0x83c |
| #define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) |
| |
| /* For Tegra30 and above only, the address is different in Tegra20 */ |
| #define USB_USBMODE 0x1f8 |
| #define USB_USBMODE_MASK (3 << 0) |
| #define USB_USBMODE_HOST (3 << 0) |
| #define USB_USBMODE_DEVICE (2 << 0) |
| |
| static DEFINE_SPINLOCK(utmip_pad_lock); |
| static int utmip_pad_count; |
| |
| struct tegra_xtal_freq { |
| int freq; |
| u8 enable_delay; |
| u8 stable_count; |
| u8 active_delay; |
| u8 xtal_freq_count; |
| u16 debounce; |
| }; |
| |
| static const struct tegra_xtal_freq tegra_freq_table[] = { |
| { |
| .freq = 12000000, |
| .enable_delay = 0x02, |
| .stable_count = 0x2F, |
| .active_delay = 0x04, |
| .xtal_freq_count = 0x76, |
| .debounce = 0x7530, |
| }, |
| { |
| .freq = 13000000, |
| .enable_delay = 0x02, |
| .stable_count = 0x33, |
| .active_delay = 0x05, |
| .xtal_freq_count = 0x7F, |
| .debounce = 0x7EF4, |
| }, |
| { |
| .freq = 19200000, |
| .enable_delay = 0x03, |
| .stable_count = 0x4B, |
| .active_delay = 0x06, |
| .xtal_freq_count = 0xBB, |
| .debounce = 0xBB80, |
| }, |
| { |
| .freq = 26000000, |
| .enable_delay = 0x04, |
| .stable_count = 0x66, |
| .active_delay = 0x09, |
| .xtal_freq_count = 0xFE, |
| .debounce = 0xFDE8, |
| }, |
| }; |
| |
| static void set_pts(struct tegra_usb_phy *phy, u8 pts_val) |
| { |
| void __iomem *base = phy->regs; |
| unsigned long val; |
| |
| if (phy->soc_config->has_hostpc) { |
| val = readl(base + TEGRA_USB_HOSTPC1_DEVLC); |
| val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0); |
| val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val); |
| writel(val, base + TEGRA_USB_HOSTPC1_DEVLC); |
| } else { |
| val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS; |
| val &= ~TEGRA_USB_PORTSC1_PTS(~0); |
| val |= TEGRA_USB_PORTSC1_PTS(pts_val); |
| writel(val, base + TEGRA_USB_PORTSC1); |
| } |
| } |
| |
| static void set_phcd(struct tegra_usb_phy *phy, bool enable) |
| { |
| void __iomem *base = phy->regs; |
| unsigned long val; |
| |
| if (phy->soc_config->has_hostpc) { |
| val = readl(base + TEGRA_USB_HOSTPC1_DEVLC); |
| if (enable) |
| val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD; |
| else |
| val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD; |
| writel(val, base + TEGRA_USB_HOSTPC1_DEVLC); |
| } else { |
| val = readl(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS; |
| if (enable) |
| val |= TEGRA_USB_PORTSC1_PHCD; |
| else |
| val &= ~TEGRA_USB_PORTSC1_PHCD; |
| writel(val, base + TEGRA_USB_PORTSC1); |
| } |
| } |
| |
| static int utmip_pad_open(struct tegra_usb_phy *phy) |
| { |
| phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads"); |
| if (IS_ERR(phy->pad_clk)) { |
| pr_err("%s: can't get utmip pad clock\n", __func__); |
| return PTR_ERR(phy->pad_clk); |
| } |
| |
| return 0; |
| } |
| |
| static void utmip_pad_power_on(struct tegra_usb_phy *phy) |
| { |
| unsigned long val, flags; |
| void __iomem *base = phy->pad_regs; |
| struct tegra_utmip_config *config = phy->config; |
| |
| clk_prepare_enable(phy->pad_clk); |
| |
| spin_lock_irqsave(&utmip_pad_lock, flags); |
| |
| if (utmip_pad_count++ == 0) { |
| val = readl(base + UTMIP_BIAS_CFG0); |
| val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); |
| |
| if (phy->soc_config->requires_extra_tuning_parameters) { |
| val &= ~(UTMIP_HSSQUELCH_LEVEL(~0) | |
| UTMIP_HSDISCON_LEVEL(~0) | |
| UTMIP_HSDISCON_LEVEL_MSB(~0)); |
| |
| val |= UTMIP_HSSQUELCH_LEVEL(config->hssquelch_level); |
| val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level); |
| val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level); |
| } |
| writel(val, base + UTMIP_BIAS_CFG0); |
| } |
| |
| spin_unlock_irqrestore(&utmip_pad_lock, flags); |
| |
| clk_disable_unprepare(phy->pad_clk); |
| } |
| |
| static int utmip_pad_power_off(struct tegra_usb_phy *phy) |
| { |
| unsigned long val, flags; |
| void __iomem *base = phy->pad_regs; |
| |
| if (!utmip_pad_count) { |
| pr_err("%s: utmip pad already powered off\n", __func__); |
| return -EINVAL; |
| } |
| |
| clk_prepare_enable(phy->pad_clk); |
| |
| spin_lock_irqsave(&utmip_pad_lock, flags); |
| |
| if (--utmip_pad_count == 0) { |
| val = readl(base + UTMIP_BIAS_CFG0); |
| val |= UTMIP_OTGPD | UTMIP_BIASPD; |
| writel(val, base + UTMIP_BIAS_CFG0); |
| } |
| |
| spin_unlock_irqrestore(&utmip_pad_lock, flags); |
| |
| clk_disable_unprepare(phy->pad_clk); |
| |
| return 0; |
| } |
| |
| static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) |
| { |
| unsigned long timeout = 2000; |
| do { |
| if ((readl(reg) & mask) == result) |
| return 0; |
| udelay(1); |
| timeout--; |
| } while (timeout); |
| return -1; |
| } |
| |
| static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| /* |
| * The USB driver may have already initiated the phy clock |
| * disable so wait to see if the clock turns off and if not |
| * then proceed with gating the clock. |
| */ |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) == 0) |
| return; |
| |
| if (phy->is_legacy_phy) { |
| val = readl(base + USB_SUSP_CTRL); |
| val |= USB_SUSP_SET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| udelay(10); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_SET; |
| writel(val, base + USB_SUSP_CTRL); |
| } else |
| set_phcd(phy, true); |
| |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) |
| pr_err("%s: timeout waiting for phy to stabilize\n", __func__); |
| } |
| |
| static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| /* |
| * The USB driver may have already initiated the phy clock |
| * enable so wait to see if the clock turns on and if not |
| * then proceed with ungating the clock. |
| */ |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, |
| USB_PHY_CLK_VALID) == 0) |
| return; |
| |
| if (phy->is_legacy_phy) { |
| val = readl(base + USB_SUSP_CTRL); |
| val |= USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| udelay(10); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| } else |
| set_phcd(phy, false); |
| |
| if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, |
| USB_PHY_CLK_VALID)) |
| pr_err("%s: timeout waiting for phy to stabilize\n", __func__); |
| } |
| |
| static int utmi_phy_power_on(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| struct tegra_utmip_config *config = phy->config; |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UTMIP_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| if (phy->is_legacy_phy) { |
| val = readl(base + USB1_LEGACY_CTRL); |
| val |= USB1_NO_LEGACY_MODE; |
| writel(val, base + USB1_LEGACY_CTRL); |
| } |
| |
| val = readl(base + UTMIP_TX_CFG0); |
| val |= UTMIP_FS_PREABMLE_J; |
| writel(val, base + UTMIP_TX_CFG0); |
| |
| val = readl(base + UTMIP_HSRX_CFG0); |
| val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); |
| val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); |
| val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); |
| writel(val, base + UTMIP_HSRX_CFG0); |
| |
| val = readl(base + UTMIP_HSRX_CFG1); |
| val &= ~UTMIP_HS_SYNC_START_DLY(~0); |
| val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); |
| writel(val, base + UTMIP_HSRX_CFG1); |
| |
| val = readl(base + UTMIP_DEBOUNCE_CFG0); |
| val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); |
| val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); |
| writel(val, base + UTMIP_DEBOUNCE_CFG0); |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; |
| writel(val, base + UTMIP_MISC_CFG0); |
| |
| if (!phy->soc_config->utmi_pll_config_in_car_module) { |
| val = readl(base + UTMIP_MISC_CFG1); |
| val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | |
| UTMIP_PLLU_STABLE_COUNT(~0)); |
| val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | |
| UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); |
| writel(val, base + UTMIP_MISC_CFG1); |
| |
| val = readl(base + UTMIP_PLL_CFG1); |
| val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | |
| UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); |
| val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | |
| UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); |
| writel(val, base + UTMIP_PLL_CFG1); |
| } |
| |
| if (phy->mode == USB_DR_MODE_PERIPHERAL) { |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); |
| writel(val, base + USB_SUSP_CTRL); |
| |
| val = readl(base + UTMIP_BAT_CHRG_CFG0); |
| val &= ~UTMIP_PD_CHRG; |
| writel(val, base + UTMIP_BAT_CHRG_CFG0); |
| } else { |
| val = readl(base + UTMIP_BAT_CHRG_CFG0); |
| val |= UTMIP_PD_CHRG; |
| writel(val, base + UTMIP_BAT_CHRG_CFG0); |
| } |
| |
| utmip_pad_power_on(phy); |
| |
| val = readl(base + UTMIP_XCVR_CFG0); |
| val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | |
| UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL | |
| UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) | |
| UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0)); |
| |
| if (!config->xcvr_setup_use_fuses) { |
| val |= UTMIP_XCVR_SETUP(config->xcvr_setup); |
| val |= UTMIP_XCVR_SETUP_MSB(config->xcvr_setup); |
| } |
| val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); |
| val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); |
| |
| if (phy->soc_config->requires_extra_tuning_parameters) { |
| val &= ~(UTMIP_XCVR_HSSLEW(~0) | UTMIP_XCVR_HSSLEW_MSB(~0)); |
| val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew); |
| val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew); |
| } |
| writel(val, base + UTMIP_XCVR_CFG0); |
| |
| val = readl(base + UTMIP_XCVR_CFG1); |
| val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | |
| UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); |
| val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); |
| writel(val, base + UTMIP_XCVR_CFG1); |
| |
| val = readl(base + UTMIP_BIAS_CFG1); |
| val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); |
| val |= UTMIP_BIAS_PDTRK_COUNT(0x5); |
| writel(val, base + UTMIP_BIAS_CFG1); |
| |
| val = readl(base + UTMIP_SPARE_CFG0); |
| if (config->xcvr_setup_use_fuses) |
| val |= FUSE_SETUP_SEL; |
| else |
| val &= ~FUSE_SETUP_SEL; |
| writel(val, base + UTMIP_SPARE_CFG0); |
| |
| if (!phy->is_legacy_phy) { |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UTMIP_PHY_ENABLE; |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~UTMIP_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| if (phy->is_legacy_phy) { |
| val = readl(base + USB1_LEGACY_CTRL); |
| val &= ~USB1_VBUS_SENSE_CTL_MASK; |
| val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; |
| writel(val, base + USB1_LEGACY_CTRL); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_SET; |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| utmi_phy_clk_enable(phy); |
| |
| if (phy->soc_config->requires_usbmode_setup) { |
| val = readl(base + USB_USBMODE); |
| val &= ~USB_USBMODE_MASK; |
| if (phy->mode == USB_DR_MODE_HOST) |
| val |= USB_USBMODE_HOST; |
| else |
| val |= USB_USBMODE_DEVICE; |
| writel(val, base + USB_USBMODE); |
| } |
| |
| if (!phy->is_legacy_phy) |
| set_pts(phy, 0); |
| |
| return 0; |
| } |
| |
| static int utmi_phy_power_off(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| utmi_phy_clk_disable(phy); |
| |
| if (phy->mode == USB_DR_MODE_PERIPHERAL) { |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); |
| val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); |
| writel(val, base + USB_SUSP_CTRL); |
| } |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UTMIP_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| val = readl(base + UTMIP_BAT_CHRG_CFG0); |
| val |= UTMIP_PD_CHRG; |
| writel(val, base + UTMIP_BAT_CHRG_CFG0); |
| |
| val = readl(base + UTMIP_XCVR_CFG0); |
| val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | |
| UTMIP_FORCE_PDZI_POWERDOWN; |
| writel(val, base + UTMIP_XCVR_CFG0); |
| |
| val = readl(base + UTMIP_XCVR_CFG1); |
| val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | |
| UTMIP_FORCE_PDDR_POWERDOWN; |
| writel(val, base + UTMIP_XCVR_CFG1); |
| |
| return utmip_pad_power_off(phy); |
| } |
| |
| static void utmi_phy_preresume(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_TX_CFG0); |
| val |= UTMIP_HS_DISCON_DISABLE; |
| writel(val, base + UTMIP_TX_CFG0); |
| } |
| |
| static void utmi_phy_postresume(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_TX_CFG0); |
| val &= ~UTMIP_HS_DISCON_DISABLE; |
| writel(val, base + UTMIP_TX_CFG0); |
| } |
| |
| static void utmi_phy_restore_start(struct tegra_usb_phy *phy, |
| enum tegra_usb_phy_port_speed port_speed) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); |
| if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) |
| val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; |
| else |
| val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; |
| writel(val, base + UTMIP_MISC_CFG0); |
| udelay(1); |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val |= UTMIP_DPDM_OBSERVE; |
| writel(val, base + UTMIP_MISC_CFG0); |
| udelay(10); |
| } |
| |
| static void utmi_phy_restore_end(struct tegra_usb_phy *phy) |
| { |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| val = readl(base + UTMIP_MISC_CFG0); |
| val &= ~UTMIP_DPDM_OBSERVE; |
| writel(val, base + UTMIP_MISC_CFG0); |
| udelay(10); |
| } |
| |
| static int ulpi_phy_power_on(struct tegra_usb_phy *phy) |
| { |
| int ret; |
| unsigned long val; |
| void __iomem *base = phy->regs; |
| |
| ret = gpio_direction_output(phy->reset_gpio, 0); |
| if (ret < 0) { |
| dev_err(phy->u_phy.dev, "gpio %d not set to 0\n", |
| phy->reset_gpio); |
| return ret; |
| } |
| msleep(5); |
| ret = gpio_direction_output(phy->reset_gpio, 1); |
| if (ret < 0) { |
| dev_err(phy->u_phy.dev, "gpio %d not set to 1\n", |
| phy->reset_gpio); |
| return ret; |
| } |
| |
| clk_prepare_enable(phy->clk); |
| msleep(1); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= UHSIC_RESET; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| val = readl(base + ULPI_TIMING_CTRL_0); |
| val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; |
| writel(val, base + ULPI_TIMING_CTRL_0); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= ULPI_PHY_ENABLE; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| val = 0; |
| writel(val, base + ULPI_TIMING_CTRL_1); |
| |
| val |= ULPI_DATA_TRIMMER_SEL(4); |
| val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); |
| val |= ULPI_DIR_TRIMMER_SEL(4); |
| writel(val, base + ULPI_TIMING_CTRL_1); |
| udelay(10); |
| |
| val |= ULPI_DATA_TRIMMER_LOAD; |
| val |= ULPI_STPDIRNXT_TRIMMER_LOAD; |
| val |= ULPI_DIR_TRIMMER_LOAD; |
| writel(val, base + ULPI_TIMING_CTRL_1); |
| |
| /* Fix VbusInvalid due to floating VBUS */ |
| ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); |
| if (ret) { |
| pr_err("%s: ulpi write failed\n", __func__); |
| return ret; |
| } |
| |
| ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); |
| if (ret) { |
| pr_err("%s: ulpi write failed\n", __func__); |
| return ret; |
| } |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val |= USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| udelay(100); |
| |
| val = readl(base + USB_SUSP_CTRL); |
| val &= ~USB_SUSP_CLR; |
| writel(val, base + USB_SUSP_CTRL); |
| |
| return 0; |
| } |
| |
| static int ulpi_phy_power_off(struct tegra_usb_phy *phy) |
| { |
| clk_disable(phy->clk); |
| return gpio_direction_output(phy->reset_gpio, 0); |
| } |
| |
| static void tegra_usb_phy_close(struct tegra_usb_phy *phy) |
| { |
| if (!IS_ERR(phy->vbus)) |
| regulator_disable(phy->vbus); |
| |
| clk_disable_unprepare(phy->pll_u); |
| } |
| |
| static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) |
| { |
| if (phy->is_ulpi_phy) |
| return ulpi_phy_power_on(phy); |
| else |
| return utmi_phy_power_on(phy); |
| } |
| |
| static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) |
| { |
| if (phy->is_ulpi_phy) |
| return ulpi_phy_power_off(phy); |
| else |
| return utmi_phy_power_off(phy); |
| } |
| |
| static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| if (suspend) |
| return tegra_usb_phy_power_off(phy); |
| else |
| return tegra_usb_phy_power_on(phy); |
| } |
| |
| static int ulpi_open(struct tegra_usb_phy *phy) |
| { |
| int err; |
| |
| phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link"); |
| if (IS_ERR(phy->clk)) { |
| pr_err("%s: can't get ulpi clock\n", __func__); |
| return PTR_ERR(phy->clk); |
| } |
| |
| err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio, |
| "ulpi_phy_reset_b"); |
| if (err < 0) { |
| dev_err(phy->u_phy.dev, "request failed for gpio: %d\n", |
| phy->reset_gpio); |
| return err; |
| } |
| |
| err = gpio_direction_output(phy->reset_gpio, 0); |
| if (err < 0) { |
| dev_err(phy->u_phy.dev, "gpio %d direction not set to output\n", |
| phy->reset_gpio); |
| return err; |
| } |
| |
| phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); |
| if (!phy->ulpi) { |
| dev_err(phy->u_phy.dev, "otg_ulpi_create returned NULL\n"); |
| err = -ENOMEM; |
| return err; |
| } |
| |
| phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; |
| return 0; |
| } |
| |
| static int tegra_usb_phy_init(struct tegra_usb_phy *phy) |
| { |
| unsigned long parent_rate; |
| int i; |
| int err; |
| |
| phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u"); |
| if (IS_ERR(phy->pll_u)) { |
| pr_err("Can't get pll_u clock\n"); |
| return PTR_ERR(phy->pll_u); |
| } |
| |
| err = clk_prepare_enable(phy->pll_u); |
| if (err) |
| return err; |
| |
| parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); |
| for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { |
| if (tegra_freq_table[i].freq == parent_rate) { |
| phy->freq = &tegra_freq_table[i]; |
| break; |
| } |
| } |
| if (!phy->freq) { |
| pr_err("invalid pll_u parent rate %ld\n", parent_rate); |
| err = -EINVAL; |
| goto fail; |
| } |
| |
| if (!IS_ERR(phy->vbus)) { |
| err = regulator_enable(phy->vbus); |
| if (err) { |
| dev_err(phy->u_phy.dev, |
| "failed to enable usb vbus regulator: %d\n", |
| err); |
| goto fail; |
| } |
| } |
| |
| if (phy->is_ulpi_phy) |
| err = ulpi_open(phy); |
| else |
| err = utmip_pad_open(phy); |
| if (err < 0) |
| goto fail; |
| |
| return 0; |
| |
| fail: |
| clk_disable_unprepare(phy->pll_u); |
| return err; |
| } |
| |
| void tegra_usb_phy_preresume(struct usb_phy *x) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| |
| if (!phy->is_ulpi_phy) |
| utmi_phy_preresume(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); |
| |
| void tegra_usb_phy_postresume(struct usb_phy *x) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| |
| if (!phy->is_ulpi_phy) |
| utmi_phy_postresume(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); |
| |
| void tegra_ehci_phy_restore_start(struct usb_phy *x, |
| enum tegra_usb_phy_port_speed port_speed) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| |
| if (!phy->is_ulpi_phy) |
| utmi_phy_restore_start(phy, port_speed); |
| } |
| EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); |
| |
| void tegra_ehci_phy_restore_end(struct usb_phy *x) |
| { |
| struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); |
| |
| if (!phy->is_ulpi_phy) |
| utmi_phy_restore_end(phy); |
| } |
| EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); |
| |
| static int read_utmi_param(struct platform_device *pdev, const char *param, |
| u8 *dest) |
| { |
| u32 value; |
| int err = of_property_read_u32(pdev->dev.of_node, param, &value); |
| *dest = (u8)value; |
| if (err < 0) |
| dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n", |
| param, err); |
| return err; |
| } |
| |
| static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy, |
| struct platform_device *pdev) |
| { |
| struct resource *res; |
| int err; |
| struct tegra_utmip_config *config; |
| |
| tegra_phy->is_ulpi_phy = false; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!res) { |
| dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n"); |
| return -ENXIO; |
| } |
| |
| tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!tegra_phy->pad_regs) { |
| dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n"); |
| return -ENOMEM; |
| } |
| |
| tegra_phy->config = devm_kzalloc(&pdev->dev, sizeof(*config), |
| GFP_KERNEL); |
| if (!tegra_phy->config) |
| return -ENOMEM; |
| |
| config = tegra_phy->config; |
| |
| err = read_utmi_param(pdev, "nvidia,hssync-start-delay", |
| &config->hssync_start_delay); |
| if (err < 0) |
| return err; |
| |
| err = read_utmi_param(pdev, "nvidia,elastic-limit", |
| &config->elastic_limit); |
| if (err < 0) |
| return err; |
| |
| err = read_utmi_param(pdev, "nvidia,idle-wait-delay", |
| &config->idle_wait_delay); |
| if (err < 0) |
| return err; |
| |
| err = read_utmi_param(pdev, "nvidia,term-range-adj", |
| &config->term_range_adj); |
| if (err < 0) |
| return err; |
| |
| err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew", |
| &config->xcvr_lsfslew); |
| if (err < 0) |
| return err; |
| |
| err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew", |
| &config->xcvr_lsrslew); |
| if (err < 0) |
| return err; |
| |
| if (tegra_phy->soc_config->requires_extra_tuning_parameters) { |
| err = read_utmi_param(pdev, "nvidia,xcvr-hsslew", |
| &config->xcvr_hsslew); |
| if (err < 0) |
| return err; |
| |
| err = read_utmi_param(pdev, "nvidia,hssquelch-level", |
| &config->hssquelch_level); |
| if (err < 0) |
| return err; |
| |
| err = read_utmi_param(pdev, "nvidia,hsdiscon-level", |
| &config->hsdiscon_level); |
| if (err < 0) |
| return err; |
| } |
| |
| config->xcvr_setup_use_fuses = of_property_read_bool( |
| pdev->dev.of_node, "nvidia,xcvr-setup-use-fuses"); |
| |
| if (!config->xcvr_setup_use_fuses) { |
| err = read_utmi_param(pdev, "nvidia,xcvr-setup", |
| &config->xcvr_setup); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static const struct tegra_phy_soc_config tegra20_soc_config = { |
| .utmi_pll_config_in_car_module = false, |
| .has_hostpc = false, |
| .requires_usbmode_setup = false, |
| .requires_extra_tuning_parameters = false, |
| }; |
| |
| static const struct tegra_phy_soc_config tegra30_soc_config = { |
| .utmi_pll_config_in_car_module = true, |
| .has_hostpc = true, |
| .requires_usbmode_setup = true, |
| .requires_extra_tuning_parameters = true, |
| }; |
| |
| static const struct of_device_id tegra_usb_phy_id_table[] = { |
| { .compatible = "nvidia,tegra30-usb-phy", .data = &tegra30_soc_config }, |
| { .compatible = "nvidia,tegra20-usb-phy", .data = &tegra20_soc_config }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table); |
| |
| static int tegra_usb_phy_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| struct resource *res; |
| struct tegra_usb_phy *tegra_phy = NULL; |
| struct device_node *np = pdev->dev.of_node; |
| enum usb_phy_interface phy_type; |
| int err; |
| |
| tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL); |
| if (!tegra_phy) |
| return -ENOMEM; |
| |
| match = of_match_device(tegra_usb_phy_id_table, &pdev->dev); |
| if (!match) { |
| dev_err(&pdev->dev, "Error: No device match found\n"); |
| return -ENODEV; |
| } |
| tegra_phy->soc_config = match->data; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "Failed to get I/O memory\n"); |
| return -ENXIO; |
| } |
| |
| tegra_phy->regs = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!tegra_phy->regs) { |
| dev_err(&pdev->dev, "Failed to remap I/O memory\n"); |
| return -ENOMEM; |
| } |
| |
| tegra_phy->is_legacy_phy = |
| of_property_read_bool(np, "nvidia,has-legacy-mode"); |
| |
| phy_type = of_usb_get_phy_mode(np); |
| switch (phy_type) { |
| case USBPHY_INTERFACE_MODE_UTMI: |
| err = utmi_phy_probe(tegra_phy, pdev); |
| if (err < 0) |
| return err; |
| break; |
| |
| case USBPHY_INTERFACE_MODE_ULPI: |
| tegra_phy->is_ulpi_phy = true; |
| |
| tegra_phy->reset_gpio = |
| of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0); |
| if (!gpio_is_valid(tegra_phy->reset_gpio)) { |
| dev_err(&pdev->dev, "invalid gpio: %d\n", |
| tegra_phy->reset_gpio); |
| return tegra_phy->reset_gpio; |
| } |
| tegra_phy->config = NULL; |
| break; |
| |
| default: |
| dev_err(&pdev->dev, "phy_type is invalid or unsupported\n"); |
| return -EINVAL; |
| } |
| |
| if (of_find_property(np, "dr_mode", NULL)) |
| tegra_phy->mode = usb_get_dr_mode(&pdev->dev); |
| else |
| tegra_phy->mode = USB_DR_MODE_HOST; |
| |
| if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) { |
| dev_err(&pdev->dev, "dr_mode is invalid\n"); |
| return -EINVAL; |
| } |
| |
| /* On some boards, the VBUS regulator doesn't need to be controlled */ |
| if (of_find_property(np, "vbus-supply", NULL)) { |
| tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus"); |
| if (IS_ERR(tegra_phy->vbus)) |
| return PTR_ERR(tegra_phy->vbus); |
| } else { |
| dev_notice(&pdev->dev, "no vbus regulator"); |
| tegra_phy->vbus = ERR_PTR(-ENODEV); |
| } |
| |
| tegra_phy->u_phy.dev = &pdev->dev; |
| err = tegra_usb_phy_init(tegra_phy); |
| if (err < 0) |
| return err; |
| |
| tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend; |
| |
| platform_set_drvdata(pdev, tegra_phy); |
| |
| err = usb_add_phy_dev(&tegra_phy->u_phy); |
| if (err < 0) { |
| tegra_usb_phy_close(tegra_phy); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int tegra_usb_phy_remove(struct platform_device *pdev) |
| { |
| struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev); |
| |
| usb_remove_phy(&tegra_phy->u_phy); |
| tegra_usb_phy_close(tegra_phy); |
| |
| return 0; |
| } |
| |
| static struct platform_driver tegra_usb_phy_driver = { |
| .probe = tegra_usb_phy_probe, |
| .remove = tegra_usb_phy_remove, |
| .driver = { |
| .name = "tegra-phy", |
| .of_match_table = tegra_usb_phy_id_table, |
| }, |
| }; |
| module_platform_driver(tegra_usb_phy_driver); |
| |
| MODULE_DESCRIPTION("Tegra USB PHY driver"); |
| MODULE_LICENSE("GPL v2"); |