| /* |
| * Copyright (C) 2011 Marvell International Ltd. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #ifndef __MV_USB_OTG_CONTROLLER__ |
| #define __MV_USB_OTG_CONTROLLER__ |
| |
| #include <linux/types.h> |
| |
| /* Command Register Bit Masks */ |
| #define USBCMD_RUN_STOP (0x00000001) |
| #define USBCMD_CTRL_RESET (0x00000002) |
| |
| /* otgsc Register Bit Masks */ |
| #define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 |
| #define OTGSC_CTRL_VUSB_CHARGE 0x00000002 |
| #define OTGSC_CTRL_OTG_TERM 0x00000008 |
| #define OTGSC_CTRL_DATA_PULSING 0x00000010 |
| #define OTGSC_STS_USB_ID 0x00000100 |
| #define OTGSC_STS_A_VBUS_VALID 0x00000200 |
| #define OTGSC_STS_A_SESSION_VALID 0x00000400 |
| #define OTGSC_STS_B_SESSION_VALID 0x00000800 |
| #define OTGSC_STS_B_SESSION_END 0x00001000 |
| #define OTGSC_STS_1MS_TOGGLE 0x00002000 |
| #define OTGSC_STS_DATA_PULSING 0x00004000 |
| #define OTGSC_INTSTS_USB_ID 0x00010000 |
| #define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 |
| #define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 |
| #define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 |
| #define OTGSC_INTSTS_B_SESSION_END 0x00100000 |
| #define OTGSC_INTSTS_1MS 0x00200000 |
| #define OTGSC_INTSTS_DATA_PULSING 0x00400000 |
| #define OTGSC_INTR_USB_ID 0x01000000 |
| #define OTGSC_INTR_A_VBUS_VALID 0x02000000 |
| #define OTGSC_INTR_A_SESSION_VALID 0x04000000 |
| #define OTGSC_INTR_B_SESSION_VALID 0x08000000 |
| #define OTGSC_INTR_B_SESSION_END 0x10000000 |
| #define OTGSC_INTR_1MS_TIMER 0x20000000 |
| #define OTGSC_INTR_DATA_PULSING 0x40000000 |
| |
| #define CAPLENGTH_MASK (0xff) |
| |
| /* Timer's interval, unit 10ms */ |
| #define T_A_WAIT_VRISE 100 |
| #define T_A_WAIT_BCON 2000 |
| #define T_A_AIDL_BDIS 100 |
| #define T_A_BIDL_ADIS 20 |
| #define T_B_ASE0_BRST 400 |
| #define T_B_SE0_SRP 300 |
| #define T_B_SRP_FAIL 2000 |
| #define T_B_DATA_PLS 10 |
| #define T_B_SRP_INIT 100 |
| #define T_A_SRP_RSPNS 10 |
| #define T_A_DRV_RSM 5 |
| |
| enum otg_function { |
| OTG_B_DEVICE = 0, |
| OTG_A_DEVICE |
| }; |
| |
| enum mv_otg_timer { |
| A_WAIT_BCON_TIMER = 0, |
| OTG_TIMER_NUM |
| }; |
| |
| /* PXA OTG state machine */ |
| struct mv_otg_ctrl { |
| /* internal variables */ |
| u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */ |
| u8 b_srp_done; |
| u8 b_hnp_en; |
| |
| /* OTG inputs */ |
| u8 a_bus_drop; |
| u8 a_bus_req; |
| u8 a_clr_err; |
| u8 a_bus_resume; |
| u8 a_bus_suspend; |
| u8 a_conn; |
| u8 a_sess_vld; |
| u8 a_srp_det; |
| u8 a_vbus_vld; |
| u8 b_bus_req; /* B-Device Require Bus */ |
| u8 b_bus_resume; |
| u8 b_bus_suspend; |
| u8 b_conn; |
| u8 b_se0_srp; |
| u8 b_sess_end; |
| u8 b_sess_vld; |
| u8 id; |
| u8 a_suspend_req; |
| |
| /*Timer event */ |
| u8 a_aidl_bdis_timeout; |
| u8 b_ase0_brst_timeout; |
| u8 a_bidl_adis_timeout; |
| u8 a_wait_bcon_timeout; |
| |
| struct timer_list timer[OTG_TIMER_NUM]; |
| }; |
| |
| #define VUSBHS_MAX_PORTS 8 |
| |
| struct mv_otg_regs { |
| u32 usbcmd; /* Command register */ |
| u32 usbsts; /* Status register */ |
| u32 usbintr; /* Interrupt enable */ |
| u32 frindex; /* Frame index */ |
| u32 reserved1[1]; |
| u32 deviceaddr; /* Device Address */ |
| u32 eplistaddr; /* Endpoint List Address */ |
| u32 ttctrl; /* HOST TT status and control */ |
| u32 burstsize; /* Programmable Burst Size */ |
| u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */ |
| u32 reserved[4]; |
| u32 epnak; /* Endpoint NAK */ |
| u32 epnaken; /* Endpoint NAK Enable */ |
| u32 configflag; /* Configured Flag register */ |
| u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */ |
| u32 otgsc; |
| u32 usbmode; /* USB Host/Device mode */ |
| u32 epsetupstat; /* Endpoint Setup Status */ |
| u32 epprime; /* Endpoint Initialize */ |
| u32 epflush; /* Endpoint De-initialize */ |
| u32 epstatus; /* Endpoint Status */ |
| u32 epcomplete; /* Endpoint Interrupt On Complete */ |
| u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */ |
| u32 mcr; /* Mux Control */ |
| u32 isr; /* Interrupt Status */ |
| u32 ier; /* Interrupt Enable */ |
| }; |
| |
| struct mv_otg { |
| struct usb_phy phy; |
| struct mv_otg_ctrl otg_ctrl; |
| |
| /* base address */ |
| void __iomem *phy_regs; |
| void __iomem *cap_regs; |
| struct mv_otg_regs __iomem *op_regs; |
| |
| struct platform_device *pdev; |
| int irq; |
| u32 irq_status; |
| u32 irq_en; |
| |
| struct delayed_work work; |
| struct workqueue_struct *qwork; |
| |
| spinlock_t wq_lock; |
| |
| struct mv_usb_platform_data *pdata; |
| |
| unsigned int active; |
| unsigned int clock_gating; |
| struct clk *clk; |
| }; |
| |
| #endif |