| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Thunderbolt Cactus Ridge driver - bus logic (NHI independent) |
| * |
| * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com> |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <linux/platform_data/x86/apple.h> |
| |
| #include "tb.h" |
| #include "tb_regs.h" |
| #include "tunnel_pci.h" |
| |
| /** |
| * struct tb_cm - Simple Thunderbolt connection manager |
| * @tunnel_list: List of active tunnels |
| * @hotplug_active: tb_handle_hotplug will stop progressing plug |
| * events and exit if this is not set (it needs to |
| * acquire the lock one more time). Used to drain wq |
| * after cfg has been paused. |
| */ |
| struct tb_cm { |
| struct list_head tunnel_list; |
| bool hotplug_active; |
| }; |
| |
| /* enumeration & hot plug handling */ |
| |
| |
| static void tb_scan_port(struct tb_port *port); |
| |
| /** |
| * tb_scan_switch() - scan for and initialize downstream switches |
| */ |
| static void tb_scan_switch(struct tb_switch *sw) |
| { |
| int i; |
| for (i = 1; i <= sw->config.max_port_number; i++) |
| tb_scan_port(&sw->ports[i]); |
| } |
| |
| /** |
| * tb_scan_port() - check for and initialize switches below port |
| */ |
| static void tb_scan_port(struct tb_port *port) |
| { |
| struct tb_switch *sw; |
| if (tb_is_upstream_port(port)) |
| return; |
| if (port->config.type != TB_TYPE_PORT) |
| return; |
| if (port->dual_link_port && port->link_nr) |
| return; /* |
| * Downstream switch is reachable through two ports. |
| * Only scan on the primary port (link_nr == 0). |
| */ |
| if (tb_wait_for_port(port, false) <= 0) |
| return; |
| if (port->remote) { |
| tb_port_WARN(port, "port already has a remote!\n"); |
| return; |
| } |
| sw = tb_switch_alloc(port->sw->tb, &port->sw->dev, |
| tb_downstream_route(port)); |
| if (!sw) |
| return; |
| |
| if (tb_switch_configure(sw)) { |
| tb_switch_put(sw); |
| return; |
| } |
| |
| sw->authorized = true; |
| |
| if (tb_switch_add(sw)) { |
| tb_switch_put(sw); |
| return; |
| } |
| |
| port->remote = tb_upstream_port(sw); |
| tb_upstream_port(sw)->remote = port; |
| tb_scan_switch(sw); |
| } |
| |
| /** |
| * tb_free_invalid_tunnels() - destroy tunnels of devices that have gone away |
| */ |
| static void tb_free_invalid_tunnels(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_pci_tunnel *tunnel; |
| struct tb_pci_tunnel *n; |
| |
| list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { |
| if (tb_pci_is_invalid(tunnel)) { |
| tb_pci_deactivate(tunnel); |
| list_del(&tunnel->list); |
| tb_pci_free(tunnel); |
| } |
| } |
| } |
| |
| /** |
| * tb_free_unplugged_children() - traverse hierarchy and free unplugged switches |
| */ |
| static void tb_free_unplugged_children(struct tb_switch *sw) |
| { |
| int i; |
| for (i = 1; i <= sw->config.max_port_number; i++) { |
| struct tb_port *port = &sw->ports[i]; |
| if (tb_is_upstream_port(port)) |
| continue; |
| if (!port->remote) |
| continue; |
| if (port->remote->sw->is_unplugged) { |
| tb_switch_remove(port->remote->sw); |
| port->remote = NULL; |
| } else { |
| tb_free_unplugged_children(port->remote->sw); |
| } |
| } |
| } |
| |
| |
| /** |
| * find_pci_up_port() - return the first PCIe up port on @sw or NULL |
| */ |
| static struct tb_port *tb_find_pci_up_port(struct tb_switch *sw) |
| { |
| int i; |
| for (i = 1; i <= sw->config.max_port_number; i++) |
| if (sw->ports[i].config.type == TB_TYPE_PCIE_UP) |
| return &sw->ports[i]; |
| return NULL; |
| } |
| |
| /** |
| * find_unused_down_port() - return the first inactive PCIe down port on @sw |
| */ |
| static struct tb_port *tb_find_unused_down_port(struct tb_switch *sw) |
| { |
| int i; |
| int cap; |
| int res; |
| int data; |
| for (i = 1; i <= sw->config.max_port_number; i++) { |
| if (tb_is_upstream_port(&sw->ports[i])) |
| continue; |
| if (sw->ports[i].config.type != TB_TYPE_PCIE_DOWN) |
| continue; |
| cap = tb_port_find_cap(&sw->ports[i], TB_PORT_CAP_ADAP); |
| if (cap < 0) |
| continue; |
| res = tb_port_read(&sw->ports[i], &data, TB_CFG_PORT, cap, 1); |
| if (res < 0) |
| continue; |
| if (data & 0x80000000) |
| continue; |
| return &sw->ports[i]; |
| } |
| return NULL; |
| } |
| |
| /** |
| * tb_activate_pcie_devices() - scan for and activate PCIe devices |
| * |
| * This method is somewhat ad hoc. For now it only supports one device |
| * per port and only devices at depth 1. |
| */ |
| static void tb_activate_pcie_devices(struct tb *tb) |
| { |
| int i; |
| int cap; |
| u32 data; |
| struct tb_switch *sw; |
| struct tb_port *up_port; |
| struct tb_port *down_port; |
| struct tb_pci_tunnel *tunnel; |
| struct tb_cm *tcm = tb_priv(tb); |
| |
| /* scan for pcie devices at depth 1*/ |
| for (i = 1; i <= tb->root_switch->config.max_port_number; i++) { |
| if (tb_is_upstream_port(&tb->root_switch->ports[i])) |
| continue; |
| if (tb->root_switch->ports[i].config.type != TB_TYPE_PORT) |
| continue; |
| if (!tb->root_switch->ports[i].remote) |
| continue; |
| sw = tb->root_switch->ports[i].remote->sw; |
| up_port = tb_find_pci_up_port(sw); |
| if (!up_port) { |
| tb_sw_info(sw, "no PCIe devices found, aborting\n"); |
| continue; |
| } |
| |
| /* check whether port is already activated */ |
| cap = tb_port_find_cap(up_port, TB_PORT_CAP_ADAP); |
| if (cap < 0) |
| continue; |
| if (tb_port_read(up_port, &data, TB_CFG_PORT, cap, 1)) |
| continue; |
| if (data & 0x80000000) { |
| tb_port_info(up_port, |
| "PCIe port already activated, aborting\n"); |
| continue; |
| } |
| |
| down_port = tb_find_unused_down_port(tb->root_switch); |
| if (!down_port) { |
| tb_port_info(up_port, |
| "All PCIe down ports are occupied, aborting\n"); |
| continue; |
| } |
| tunnel = tb_pci_alloc(tb, up_port, down_port); |
| if (!tunnel) { |
| tb_port_info(up_port, |
| "PCIe tunnel allocation failed, aborting\n"); |
| continue; |
| } |
| |
| if (tb_pci_activate(tunnel)) { |
| tb_port_info(up_port, |
| "PCIe tunnel activation failed, aborting\n"); |
| tb_pci_free(tunnel); |
| continue; |
| } |
| |
| list_add(&tunnel->list, &tcm->tunnel_list); |
| } |
| } |
| |
| /* hotplug handling */ |
| |
| struct tb_hotplug_event { |
| struct work_struct work; |
| struct tb *tb; |
| u64 route; |
| u8 port; |
| bool unplug; |
| }; |
| |
| /** |
| * tb_handle_hotplug() - handle hotplug event |
| * |
| * Executes on tb->wq. |
| */ |
| static void tb_handle_hotplug(struct work_struct *work) |
| { |
| struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work); |
| struct tb *tb = ev->tb; |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_switch *sw; |
| struct tb_port *port; |
| mutex_lock(&tb->lock); |
| if (!tcm->hotplug_active) |
| goto out; /* during init, suspend or shutdown */ |
| |
| sw = get_switch_at_route(tb->root_switch, ev->route); |
| if (!sw) { |
| tb_warn(tb, |
| "hotplug event from non existent switch %llx:%x (unplug: %d)\n", |
| ev->route, ev->port, ev->unplug); |
| goto out; |
| } |
| if (ev->port > sw->config.max_port_number) { |
| tb_warn(tb, |
| "hotplug event from non existent port %llx:%x (unplug: %d)\n", |
| ev->route, ev->port, ev->unplug); |
| goto out; |
| } |
| port = &sw->ports[ev->port]; |
| if (tb_is_upstream_port(port)) { |
| tb_warn(tb, |
| "hotplug event for upstream port %llx:%x (unplug: %d)\n", |
| ev->route, ev->port, ev->unplug); |
| goto out; |
| } |
| if (ev->unplug) { |
| if (port->remote) { |
| tb_port_info(port, "unplugged\n"); |
| tb_sw_set_unplugged(port->remote->sw); |
| tb_free_invalid_tunnels(tb); |
| tb_switch_remove(port->remote->sw); |
| port->remote = NULL; |
| } else { |
| tb_port_info(port, |
| "got unplug event for disconnected port, ignoring\n"); |
| } |
| } else if (port->remote) { |
| tb_port_info(port, |
| "got plug event for connected port, ignoring\n"); |
| } else { |
| tb_port_info(port, "hotplug: scanning\n"); |
| tb_scan_port(port); |
| if (!port->remote) { |
| tb_port_info(port, "hotplug: no switch found\n"); |
| } else if (port->remote->sw->config.depth > 1) { |
| tb_sw_warn(port->remote->sw, |
| "hotplug: chaining not supported\n"); |
| } else { |
| tb_sw_info(port->remote->sw, |
| "hotplug: activating pcie devices\n"); |
| tb_activate_pcie_devices(tb); |
| } |
| } |
| out: |
| mutex_unlock(&tb->lock); |
| kfree(ev); |
| } |
| |
| /** |
| * tb_schedule_hotplug_handler() - callback function for the control channel |
| * |
| * Delegates to tb_handle_hotplug. |
| */ |
| static void tb_handle_event(struct tb *tb, enum tb_cfg_pkg_type type, |
| const void *buf, size_t size) |
| { |
| const struct cfg_event_pkg *pkg = buf; |
| struct tb_hotplug_event *ev; |
| u64 route; |
| |
| if (type != TB_CFG_PKG_EVENT) { |
| tb_warn(tb, "unexpected event %#x, ignoring\n", type); |
| return; |
| } |
| |
| route = tb_cfg_get_route(&pkg->header); |
| |
| if (tb_cfg_error(tb->ctl, route, pkg->port, |
| TB_CFG_ERROR_ACK_PLUG_EVENT)) { |
| tb_warn(tb, "could not ack plug event on %llx:%x\n", route, |
| pkg->port); |
| } |
| |
| ev = kmalloc(sizeof(*ev), GFP_KERNEL); |
| if (!ev) |
| return; |
| INIT_WORK(&ev->work, tb_handle_hotplug); |
| ev->tb = tb; |
| ev->route = route; |
| ev->port = pkg->port; |
| ev->unplug = pkg->unplug; |
| queue_work(tb->wq, &ev->work); |
| } |
| |
| static void tb_stop(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_pci_tunnel *tunnel; |
| struct tb_pci_tunnel *n; |
| |
| /* tunnels are only present after everything has been initialized */ |
| list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) { |
| tb_pci_deactivate(tunnel); |
| tb_pci_free(tunnel); |
| } |
| tb_switch_remove(tb->root_switch); |
| tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ |
| } |
| |
| static int tb_start(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| int ret; |
| |
| tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0); |
| if (!tb->root_switch) |
| return -ENOMEM; |
| |
| /* |
| * ICM firmware upgrade needs running firmware and in native |
| * mode that is not available so disable firmware upgrade of the |
| * root switch. |
| */ |
| tb->root_switch->no_nvm_upgrade = true; |
| |
| ret = tb_switch_configure(tb->root_switch); |
| if (ret) { |
| tb_switch_put(tb->root_switch); |
| return ret; |
| } |
| |
| /* Announce the switch to the world */ |
| ret = tb_switch_add(tb->root_switch); |
| if (ret) { |
| tb_switch_put(tb->root_switch); |
| return ret; |
| } |
| |
| /* Full scan to discover devices added before the driver was loaded. */ |
| tb_scan_switch(tb->root_switch); |
| tb_activate_pcie_devices(tb); |
| |
| /* Allow tb_handle_hotplug to progress events */ |
| tcm->hotplug_active = true; |
| return 0; |
| } |
| |
| static int tb_suspend_noirq(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| |
| tb_info(tb, "suspending...\n"); |
| tb_switch_suspend(tb->root_switch); |
| tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ |
| tb_info(tb, "suspend finished\n"); |
| |
| return 0; |
| } |
| |
| static int tb_resume_noirq(struct tb *tb) |
| { |
| struct tb_cm *tcm = tb_priv(tb); |
| struct tb_pci_tunnel *tunnel, *n; |
| |
| tb_info(tb, "resuming...\n"); |
| |
| /* remove any pci devices the firmware might have setup */ |
| tb_switch_reset(tb, 0); |
| |
| tb_switch_resume(tb->root_switch); |
| tb_free_invalid_tunnels(tb); |
| tb_free_unplugged_children(tb->root_switch); |
| list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) |
| tb_pci_restart(tunnel); |
| if (!list_empty(&tcm->tunnel_list)) { |
| /* |
| * the pcie links need some time to get going. |
| * 100ms works for me... |
| */ |
| tb_info(tb, "tunnels restarted, sleeping for 100ms\n"); |
| msleep(100); |
| } |
| /* Allow tb_handle_hotplug to progress events */ |
| tcm->hotplug_active = true; |
| tb_info(tb, "resume finished\n"); |
| |
| return 0; |
| } |
| |
| static const struct tb_cm_ops tb_cm_ops = { |
| .start = tb_start, |
| .stop = tb_stop, |
| .suspend_noirq = tb_suspend_noirq, |
| .resume_noirq = tb_resume_noirq, |
| .handle_event = tb_handle_event, |
| }; |
| |
| struct tb *tb_probe(struct tb_nhi *nhi) |
| { |
| struct tb_cm *tcm; |
| struct tb *tb; |
| |
| if (!x86_apple_machine) |
| return NULL; |
| |
| tb = tb_domain_alloc(nhi, sizeof(*tcm)); |
| if (!tb) |
| return NULL; |
| |
| tb->security_level = TB_SECURITY_NONE; |
| tb->cm_ops = &tb_cm_ops; |
| |
| tcm = tb_priv(tb); |
| INIT_LIST_HEAD(&tcm->tunnel_list); |
| |
| return tb; |
| } |