| /* |
| * wd33c93.h - Linux device driver definitions for the |
| * Commodore Amiga A2091/590 SCSI controller card |
| * |
| * IMPORTANT: This file is for version 1.25 - 09/Jul/1997 |
| * |
| * Copyright (c) 1996 John Shifflett, GeoLog Consulting |
| * john@geolog.com |
| * jshiffle@netcom.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #ifndef WD33C93_H |
| #define WD33C93_H |
| |
| |
| #define PROC_INTERFACE /* add code for /proc/scsi/wd33c93/xxx interface */ |
| #ifdef PROC_INTERFACE |
| #define PROC_STATISTICS /* add code for keeping various real time stats */ |
| #endif |
| |
| #define SYNC_DEBUG /* extra info on sync negotiation printed */ |
| #define DEBUGGING_ON /* enable command-line debugging bitmask */ |
| #define DEBUG_DEFAULTS 0 /* default debugging bitmask */ |
| |
| |
| #ifdef DEBUGGING_ON |
| #define DB(f,a) if (hostdata->args & (f)) a; |
| #else |
| #define DB(f,a) |
| #endif |
| |
| #define uchar unsigned char |
| |
| |
| /* wd register names */ |
| #define WD_OWN_ID 0x00 |
| #define WD_CONTROL 0x01 |
| #define WD_TIMEOUT_PERIOD 0x02 |
| #define WD_CDB_1 0x03 |
| #define WD_CDB_2 0x04 |
| #define WD_CDB_3 0x05 |
| #define WD_CDB_4 0x06 |
| #define WD_CDB_5 0x07 |
| #define WD_CDB_6 0x08 |
| #define WD_CDB_7 0x09 |
| #define WD_CDB_8 0x0a |
| #define WD_CDB_9 0x0b |
| #define WD_CDB_10 0x0c |
| #define WD_CDB_11 0x0d |
| #define WD_CDB_12 0x0e |
| #define WD_TARGET_LUN 0x0f |
| #define WD_COMMAND_PHASE 0x10 |
| #define WD_SYNCHRONOUS_TRANSFER 0x11 |
| #define WD_TRANSFER_COUNT_MSB 0x12 |
| #define WD_TRANSFER_COUNT 0x13 |
| #define WD_TRANSFER_COUNT_LSB 0x14 |
| #define WD_DESTINATION_ID 0x15 |
| #define WD_SOURCE_ID 0x16 |
| #define WD_SCSI_STATUS 0x17 |
| #define WD_COMMAND 0x18 |
| #define WD_DATA 0x19 |
| #define WD_QUEUE_TAG 0x1a |
| #define WD_AUXILIARY_STATUS 0x1f |
| |
| /* WD commands */ |
| #define WD_CMD_RESET 0x00 |
| #define WD_CMD_ABORT 0x01 |
| #define WD_CMD_ASSERT_ATN 0x02 |
| #define WD_CMD_NEGATE_ACK 0x03 |
| #define WD_CMD_DISCONNECT 0x04 |
| #define WD_CMD_RESELECT 0x05 |
| #define WD_CMD_SEL_ATN 0x06 |
| #define WD_CMD_SEL 0x07 |
| #define WD_CMD_SEL_ATN_XFER 0x08 |
| #define WD_CMD_SEL_XFER 0x09 |
| #define WD_CMD_RESEL_RECEIVE 0x0a |
| #define WD_CMD_RESEL_SEND 0x0b |
| #define WD_CMD_WAIT_SEL_RECEIVE 0x0c |
| #define WD_CMD_TRANS_ADDR 0x18 |
| #define WD_CMD_TRANS_INFO 0x20 |
| #define WD_CMD_TRANSFER_PAD 0x21 |
| #define WD_CMD_SBT_MODE 0x80 |
| |
| /* ASR register */ |
| #define ASR_INT (0x80) |
| #define ASR_LCI (0x40) |
| #define ASR_BSY (0x20) |
| #define ASR_CIP (0x10) |
| #define ASR_PE (0x02) |
| #define ASR_DBR (0x01) |
| |
| /* SCSI Bus Phases */ |
| #define PHS_DATA_OUT 0x00 |
| #define PHS_DATA_IN 0x01 |
| #define PHS_COMMAND 0x02 |
| #define PHS_STATUS 0x03 |
| #define PHS_MESS_OUT 0x06 |
| #define PHS_MESS_IN 0x07 |
| |
| /* Command Status Register definitions */ |
| |
| /* reset state interrupts */ |
| #define CSR_RESET 0x00 |
| #define CSR_RESET_AF 0x01 |
| |
| /* successful completion interrupts */ |
| #define CSR_RESELECT 0x10 |
| #define CSR_SELECT 0x11 |
| #define CSR_SEL_XFER_DONE 0x16 |
| #define CSR_XFER_DONE 0x18 |
| |
| /* paused or aborted interrupts */ |
| #define CSR_MSGIN 0x20 |
| #define CSR_SDP 0x21 |
| #define CSR_SEL_ABORT 0x22 |
| #define CSR_RESEL_ABORT 0x25 |
| #define CSR_RESEL_ABORT_AM 0x27 |
| #define CSR_ABORT 0x28 |
| |
| /* terminated interrupts */ |
| #define CSR_INVALID 0x40 |
| #define CSR_UNEXP_DISC 0x41 |
| #define CSR_TIMEOUT 0x42 |
| #define CSR_PARITY 0x43 |
| #define CSR_PARITY_ATN 0x44 |
| #define CSR_BAD_STATUS 0x45 |
| #define CSR_UNEXP 0x48 |
| |
| /* service required interrupts */ |
| #define CSR_RESEL 0x80 |
| #define CSR_RESEL_AM 0x81 |
| #define CSR_DISC 0x85 |
| #define CSR_SRV_REQ 0x88 |
| |
| /* Own ID/CDB Size register */ |
| #define OWNID_EAF 0x08 |
| #define OWNID_EHP 0x10 |
| #define OWNID_RAF 0x20 |
| #define OWNID_FS_8 0x00 |
| #define OWNID_FS_12 0x40 |
| #define OWNID_FS_16 0x80 |
| |
| /* define these so we don't have to change a2091.c, etc. */ |
| #define WD33C93_FS_8_10 OWNID_FS_8 |
| #define WD33C93_FS_12_15 OWNID_FS_12 |
| #define WD33C93_FS_16_20 OWNID_FS_16 |
| |
| /* pass input-clock explicitly. accepted mhz values are 8-10,12-20 */ |
| #define WD33C93_FS_MHZ(mhz) (mhz) |
| |
| /* Control register */ |
| #define CTRL_HSP 0x01 |
| #define CTRL_HA 0x02 |
| #define CTRL_IDI 0x04 |
| #define CTRL_EDI 0x08 |
| #define CTRL_HHP 0x10 |
| #define CTRL_POLLED 0x00 |
| #define CTRL_BURST 0x20 |
| #define CTRL_BUS 0x40 |
| #define CTRL_DMA 0x80 |
| |
| /* Timeout Period register */ |
| #define TIMEOUT_PERIOD_VALUE 20 /* 20 = 200 ms */ |
| |
| /* Synchronous Transfer Register */ |
| #define STR_FSS 0x80 |
| |
| /* Destination ID register */ |
| #define DSTID_DPD 0x40 |
| #define DATA_OUT_DIR 0 |
| #define DATA_IN_DIR 1 |
| #define DSTID_SCC 0x80 |
| |
| /* Source ID register */ |
| #define SRCID_MASK 0x07 |
| #define SRCID_SIV 0x08 |
| #define SRCID_DSP 0x20 |
| #define SRCID_ES 0x40 |
| #define SRCID_ER 0x80 |
| |
| /* This is what the 3393 chip looks like to us */ |
| typedef struct { |
| #ifdef CONFIG_WD33C93_PIO |
| unsigned int SASR; |
| unsigned int SCMD; |
| #else |
| volatile unsigned char *SASR; |
| volatile unsigned char *SCMD; |
| #endif |
| } wd33c93_regs; |
| |
| |
| typedef int (*dma_setup_t) (struct scsi_cmnd *SCpnt, int dir_in); |
| typedef void (*dma_stop_t) (struct Scsi_Host *instance, |
| struct scsi_cmnd *SCpnt, int status); |
| |
| |
| #define ILLEGAL_STATUS_BYTE 0xff |
| |
| #define DEFAULT_SX_PER 376 /* (ns) fairly safe */ |
| #define DEFAULT_SX_OFF 0 /* aka async */ |
| |
| #define OPTIMUM_SX_PER 252 /* (ns) best we can do (mult-of-4) */ |
| #define OPTIMUM_SX_OFF 12 /* size of wd3393 fifo */ |
| |
| struct sx_period { |
| unsigned int period_ns; |
| uchar reg_value; |
| }; |
| |
| /* FEF: defines for hostdata->dma_buffer_pool */ |
| |
| #define BUF_CHIP_ALLOCED 0 |
| #define BUF_SCSI_ALLOCED 1 |
| |
| struct WD33C93_hostdata { |
| struct Scsi_Host *next; |
| wd33c93_regs regs; |
| spinlock_t lock; |
| uchar clock_freq; |
| uchar chip; /* what kind of wd33c93? */ |
| uchar microcode; /* microcode rev */ |
| uchar dma_buffer_pool; /* FEF: buffer from chip_ram? */ |
| int dma_dir; /* data transfer dir. */ |
| dma_setup_t dma_setup; |
| dma_stop_t dma_stop; |
| unsigned int dma_xfer_mask; |
| uchar *dma_bounce_buffer; |
| unsigned int dma_bounce_len; |
| volatile uchar busy[8]; /* index = target, bit = lun */ |
| volatile struct scsi_cmnd *input_Q; /* commands waiting to be started */ |
| volatile struct scsi_cmnd *selecting; /* trying to select this command */ |
| volatile struct scsi_cmnd *connected; /* currently connected command */ |
| volatile struct scsi_cmnd *disconnected_Q;/* commands waiting for reconnect */ |
| uchar state; /* what we are currently doing */ |
| uchar dma; /* current state of DMA (on/off) */ |
| uchar level2; /* extent to which Level-2 commands are used */ |
| uchar disconnect; /* disconnect/reselect policy */ |
| unsigned int args; /* set from command-line argument */ |
| uchar incoming_msg[8]; /* filled during message_in phase */ |
| int incoming_ptr; /* mainly used with EXTENDED messages */ |
| uchar outgoing_msg[8]; /* send this during next message_out */ |
| int outgoing_len; /* length of outgoing message */ |
| unsigned int default_sx_per; /* default transfer period for SCSI bus */ |
| uchar sync_xfer[8]; /* sync_xfer reg settings per target */ |
| uchar sync_stat[8]; /* status of sync negotiation per target */ |
| uchar no_sync; /* bitmask: don't do sync on these targets */ |
| uchar no_dma; /* set this flag to disable DMA */ |
| uchar dma_mode; /* DMA Burst Mode or Single Byte DMA */ |
| uchar fast; /* set this flag to enable Fast SCSI */ |
| struct sx_period sx_table[9]; /* transfer periods for actual DTC-setting */ |
| #ifdef PROC_INTERFACE |
| uchar proc; /* bitmask: what's in proc output */ |
| #ifdef PROC_STATISTICS |
| unsigned long cmd_cnt[8]; /* # of commands issued per target */ |
| unsigned long int_cnt; /* # of interrupts serviced */ |
| unsigned long pio_cnt; /* # of pio data transfers */ |
| unsigned long dma_cnt; /* # of DMA data transfers */ |
| unsigned long disc_allowed_cnt[8]; /* # of disconnects allowed per target */ |
| unsigned long disc_done_cnt[8]; /* # of disconnects done per target*/ |
| #endif |
| #endif |
| }; |
| |
| |
| /* defines for hostdata->chip */ |
| |
| #define C_WD33C93 0 |
| #define C_WD33C93A 1 |
| #define C_WD33C93B 2 |
| #define C_UNKNOWN_CHIP 100 |
| |
| /* defines for hostdata->state */ |
| |
| #define S_UNCONNECTED 0 |
| #define S_SELECTING 1 |
| #define S_RUNNING_LEVEL2 2 |
| #define S_CONNECTED 3 |
| #define S_PRE_TMP_DISC 4 |
| #define S_PRE_CMP_DISC 5 |
| |
| /* defines for hostdata->dma */ |
| |
| #define D_DMA_OFF 0 |
| #define D_DMA_RUNNING 1 |
| |
| /* defines for hostdata->level2 */ |
| /* NOTE: only the first 3 are implemented so far */ |
| |
| #define L2_NONE 1 /* no combination commands - we get lots of ints */ |
| #define L2_SELECT 2 /* start with SEL_ATN_XFER, but never resume it */ |
| #define L2_BASIC 3 /* resume after STATUS ints & RDP messages */ |
| #define L2_DATA 4 /* resume after DATA_IN/OUT ints */ |
| #define L2_MOST 5 /* resume after anything except a RESELECT int */ |
| #define L2_RESELECT 6 /* resume after everything, including RESELECT ints */ |
| #define L2_ALL 7 /* always resume */ |
| |
| /* defines for hostdata->disconnect */ |
| |
| #define DIS_NEVER 0 |
| #define DIS_ADAPTIVE 1 |
| #define DIS_ALWAYS 2 |
| |
| /* defines for hostdata->args */ |
| |
| #define DB_TEST1 1<<0 |
| #define DB_TEST2 1<<1 |
| #define DB_QUEUE_COMMAND 1<<2 |
| #define DB_EXECUTE 1<<3 |
| #define DB_INTR 1<<4 |
| #define DB_TRANSFER 1<<5 |
| #define DB_MASK 0x3f |
| |
| /* defines for hostdata->sync_stat[] */ |
| |
| #define SS_UNSET 0 |
| #define SS_FIRST 1 |
| #define SS_WAITING 2 |
| #define SS_SET 3 |
| |
| /* defines for hostdata->proc */ |
| |
| #define PR_VERSION 1<<0 |
| #define PR_INFO 1<<1 |
| #define PR_STATISTICS 1<<2 |
| #define PR_CONNECTED 1<<3 |
| #define PR_INPUTQ 1<<4 |
| #define PR_DISCQ 1<<5 |
| #define PR_TEST 1<<6 |
| #define PR_STOP 1<<7 |
| |
| |
| void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs, |
| dma_setup_t setup, dma_stop_t stop, int clock_freq); |
| int wd33c93_abort (struct scsi_cmnd *cmd); |
| int wd33c93_queuecommand (struct Scsi_Host *h, struct scsi_cmnd *cmd); |
| void wd33c93_intr (struct Scsi_Host *instance); |
| int wd33c93_show_info(struct seq_file *, struct Scsi_Host *); |
| int wd33c93_write_info(struct Scsi_Host *, char *, int); |
| int wd33c93_host_reset (struct scsi_cmnd *); |
| |
| #endif /* WD33C93_H */ |