| /* |
| * driver for Microsemi PQI-based storage controllers |
| * Copyright (c) 2016-2017 Microsemi Corporation |
| * Copyright (c) 2016 PMC-Sierra, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more details. |
| * |
| * Questions/Comments/Bugfixes to esc.storagedev@microsemi.com |
| * |
| */ |
| |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| |
| #if !defined(_SMARTPQI_H) |
| #define _SMARTPQI_H |
| |
| #pragma pack(1) |
| |
| #define PQI_DEVICE_SIGNATURE "PQI DREG" |
| |
| /* This structure is defined by the PQI specification. */ |
| struct pqi_device_registers { |
| __le64 signature; |
| u8 function_and_status_code; |
| u8 reserved[7]; |
| u8 max_admin_iq_elements; |
| u8 max_admin_oq_elements; |
| u8 admin_iq_element_length; /* in 16-byte units */ |
| u8 admin_oq_element_length; /* in 16-byte units */ |
| __le16 max_reset_timeout; /* in 100-millisecond units */ |
| u8 reserved1[2]; |
| __le32 legacy_intx_status; |
| __le32 legacy_intx_mask_set; |
| __le32 legacy_intx_mask_clear; |
| u8 reserved2[28]; |
| __le32 device_status; |
| u8 reserved3[4]; |
| __le64 admin_iq_pi_offset; |
| __le64 admin_oq_ci_offset; |
| __le64 admin_iq_element_array_addr; |
| __le64 admin_oq_element_array_addr; |
| __le64 admin_iq_ci_addr; |
| __le64 admin_oq_pi_addr; |
| u8 admin_iq_num_elements; |
| u8 admin_oq_num_elements; |
| __le16 admin_queue_int_msg_num; |
| u8 reserved4[4]; |
| __le32 device_error; |
| u8 reserved5[4]; |
| __le64 error_details; |
| __le32 device_reset; |
| __le32 power_action; |
| u8 reserved6[104]; |
| }; |
| |
| /* |
| * controller registers |
| * |
| * These are defined by the Microsemi implementation. |
| * |
| * Some registers (those named sis_*) are only used when in |
| * legacy SIS mode before we transition the controller into |
| * PQI mode. There are a number of other SIS mode registers, |
| * but we don't use them, so only the SIS registers that we |
| * care about are defined here. The offsets mentioned in the |
| * comments are the offsets from the PCIe BAR 0. |
| */ |
| struct pqi_ctrl_registers { |
| u8 reserved[0x20]; |
| __le32 sis_host_to_ctrl_doorbell; /* 20h */ |
| u8 reserved1[0x34 - (0x20 + sizeof(__le32))]; |
| __le32 sis_interrupt_mask; /* 34h */ |
| u8 reserved2[0x9c - (0x34 + sizeof(__le32))]; |
| __le32 sis_ctrl_to_host_doorbell; /* 9Ch */ |
| u8 reserved3[0xa0 - (0x9c + sizeof(__le32))]; |
| __le32 sis_ctrl_to_host_doorbell_clear; /* A0h */ |
| u8 reserved4[0xb0 - (0xa0 + sizeof(__le32))]; |
| __le32 sis_driver_scratch; /* B0h */ |
| u8 reserved5[0xbc - (0xb0 + sizeof(__le32))]; |
| __le32 sis_firmware_status; /* BCh */ |
| u8 reserved6[0x1000 - (0xbc + sizeof(__le32))]; |
| __le32 sis_mailbox[8]; /* 1000h */ |
| u8 reserved7[0x4000 - (0x1000 + (sizeof(__le32) * 8))]; |
| /* |
| * The PQI spec states that the PQI registers should be at |
| * offset 0 from the PCIe BAR 0. However, we can't map |
| * them at offset 0 because that would break compatibility |
| * with the SIS registers. So we map them at offset 4000h. |
| */ |
| struct pqi_device_registers pqi_registers; /* 4000h */ |
| }; |
| |
| #define PQI_DEVICE_REGISTERS_OFFSET 0x4000 |
| |
| enum pqi_io_path { |
| RAID_PATH = 0, |
| AIO_PATH = 1 |
| }; |
| |
| enum pqi_irq_mode { |
| IRQ_MODE_NONE, |
| IRQ_MODE_INTX, |
| IRQ_MODE_MSIX |
| }; |
| |
| struct pqi_sg_descriptor { |
| __le64 address; |
| __le32 length; |
| __le32 flags; |
| }; |
| |
| /* manifest constants for the flags field of pqi_sg_descriptor */ |
| #define CISS_SG_LAST 0x40000000 |
| #define CISS_SG_CHAIN 0x80000000 |
| |
| struct pqi_iu_header { |
| u8 iu_type; |
| u8 reserved; |
| __le16 iu_length; /* in bytes - does not include the length */ |
| /* of this header */ |
| __le16 response_queue_id; /* specifies the OQ where the */ |
| /* response IU is to be delivered */ |
| u8 work_area[2]; /* reserved for driver use */ |
| }; |
| |
| /* |
| * According to the PQI spec, the IU header is only the first 4 bytes of our |
| * pqi_iu_header structure. |
| */ |
| #define PQI_REQUEST_HEADER_LENGTH 4 |
| |
| struct pqi_general_admin_request { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| u8 function_code; |
| union { |
| struct { |
| u8 reserved[33]; |
| __le32 buffer_length; |
| struct pqi_sg_descriptor sg_descriptor; |
| } report_device_capability; |
| |
| struct { |
| u8 reserved; |
| __le16 queue_id; |
| u8 reserved1[2]; |
| __le64 element_array_addr; |
| __le64 ci_addr; |
| __le16 num_elements; |
| __le16 element_length; |
| u8 queue_protocol; |
| u8 reserved2[23]; |
| __le32 vendor_specific; |
| } create_operational_iq; |
| |
| struct { |
| u8 reserved; |
| __le16 queue_id; |
| u8 reserved1[2]; |
| __le64 element_array_addr; |
| __le64 pi_addr; |
| __le16 num_elements; |
| __le16 element_length; |
| u8 queue_protocol; |
| u8 reserved2[3]; |
| __le16 int_msg_num; |
| __le16 coalescing_count; |
| __le32 min_coalescing_time; |
| __le32 max_coalescing_time; |
| u8 reserved3[8]; |
| __le32 vendor_specific; |
| } create_operational_oq; |
| |
| struct { |
| u8 reserved; |
| __le16 queue_id; |
| u8 reserved1[50]; |
| } delete_operational_queue; |
| |
| struct { |
| u8 reserved; |
| __le16 queue_id; |
| u8 reserved1[46]; |
| __le32 vendor_specific; |
| } change_operational_iq_properties; |
| |
| } data; |
| }; |
| |
| struct pqi_general_admin_response { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| u8 function_code; |
| u8 status; |
| union { |
| struct { |
| u8 status_descriptor[4]; |
| __le64 iq_pi_offset; |
| u8 reserved[40]; |
| } create_operational_iq; |
| |
| struct { |
| u8 status_descriptor[4]; |
| __le64 oq_ci_offset; |
| u8 reserved[40]; |
| } create_operational_oq; |
| } data; |
| }; |
| |
| struct pqi_iu_layer_descriptor { |
| u8 inbound_spanning_supported : 1; |
| u8 reserved : 7; |
| u8 reserved1[5]; |
| __le16 max_inbound_iu_length; |
| u8 outbound_spanning_supported : 1; |
| u8 reserved2 : 7; |
| u8 reserved3[5]; |
| __le16 max_outbound_iu_length; |
| }; |
| |
| struct pqi_device_capability { |
| __le16 data_length; |
| u8 reserved[6]; |
| u8 iq_arbitration_priority_support_bitmask; |
| u8 maximum_aw_a; |
| u8 maximum_aw_b; |
| u8 maximum_aw_c; |
| u8 max_arbitration_burst : 3; |
| u8 reserved1 : 4; |
| u8 iqa : 1; |
| u8 reserved2[2]; |
| u8 iq_freeze : 1; |
| u8 reserved3 : 7; |
| __le16 max_inbound_queues; |
| __le16 max_elements_per_iq; |
| u8 reserved4[4]; |
| __le16 max_iq_element_length; |
| __le16 min_iq_element_length; |
| u8 reserved5[2]; |
| __le16 max_outbound_queues; |
| __le16 max_elements_per_oq; |
| __le16 intr_coalescing_time_granularity; |
| __le16 max_oq_element_length; |
| __le16 min_oq_element_length; |
| u8 reserved6[24]; |
| struct pqi_iu_layer_descriptor iu_layer_descriptors[32]; |
| }; |
| |
| #define PQI_MAX_EMBEDDED_SG_DESCRIPTORS 4 |
| |
| struct pqi_raid_path_request { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| __le16 nexus_id; |
| __le32 buffer_length; |
| u8 lun_number[8]; |
| __le16 protocol_specific; |
| u8 data_direction : 2; |
| u8 partial : 1; |
| u8 reserved1 : 4; |
| u8 fence : 1; |
| __le16 error_index; |
| u8 reserved2; |
| u8 task_attribute : 3; |
| u8 command_priority : 4; |
| u8 reserved3 : 1; |
| u8 reserved4 : 2; |
| u8 additional_cdb_bytes_usage : 3; |
| u8 reserved5 : 3; |
| u8 cdb[32]; |
| struct pqi_sg_descriptor |
| sg_descriptors[PQI_MAX_EMBEDDED_SG_DESCRIPTORS]; |
| }; |
| |
| struct pqi_aio_path_request { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| u8 reserved1[2]; |
| __le32 nexus_id; |
| __le32 buffer_length; |
| u8 data_direction : 2; |
| u8 partial : 1; |
| u8 memory_type : 1; |
| u8 fence : 1; |
| u8 encryption_enable : 1; |
| u8 reserved2 : 2; |
| u8 task_attribute : 3; |
| u8 command_priority : 4; |
| u8 reserved3 : 1; |
| __le16 data_encryption_key_index; |
| __le32 encrypt_tweak_lower; |
| __le32 encrypt_tweak_upper; |
| u8 cdb[16]; |
| __le16 error_index; |
| u8 num_sg_descriptors; |
| u8 cdb_length; |
| u8 lun_number[8]; |
| u8 reserved4[4]; |
| struct pqi_sg_descriptor |
| sg_descriptors[PQI_MAX_EMBEDDED_SG_DESCRIPTORS]; |
| }; |
| |
| struct pqi_io_response { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| __le16 error_index; |
| u8 reserved2[4]; |
| }; |
| |
| struct pqi_general_management_request { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| union { |
| struct { |
| u8 reserved[2]; |
| __le32 buffer_length; |
| struct pqi_sg_descriptor sg_descriptors[3]; |
| } report_event_configuration; |
| |
| struct { |
| __le16 global_event_oq_id; |
| __le32 buffer_length; |
| struct pqi_sg_descriptor sg_descriptors[3]; |
| } set_event_configuration; |
| } data; |
| }; |
| |
| struct pqi_event_descriptor { |
| u8 event_type; |
| u8 reserved; |
| __le16 oq_id; |
| }; |
| |
| struct pqi_event_config { |
| u8 reserved[2]; |
| u8 num_event_descriptors; |
| u8 reserved1; |
| struct pqi_event_descriptor descriptors[1]; |
| }; |
| |
| #define PQI_MAX_EVENT_DESCRIPTORS 255 |
| |
| struct pqi_event_response { |
| struct pqi_iu_header header; |
| u8 event_type; |
| u8 reserved2 : 7; |
| u8 request_acknowlege : 1; |
| __le16 event_id; |
| __le32 additional_event_id; |
| u8 data[16]; |
| }; |
| |
| struct pqi_event_acknowledge_request { |
| struct pqi_iu_header header; |
| u8 event_type; |
| u8 reserved2; |
| __le16 event_id; |
| __le32 additional_event_id; |
| }; |
| |
| struct pqi_task_management_request { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| __le16 nexus_id; |
| u8 reserved[4]; |
| u8 lun_number[8]; |
| __le16 protocol_specific; |
| __le16 outbound_queue_id_to_manage; |
| __le16 request_id_to_manage; |
| u8 task_management_function; |
| u8 reserved2 : 7; |
| u8 fence : 1; |
| }; |
| |
| #define SOP_TASK_MANAGEMENT_LUN_RESET 0x8 |
| |
| struct pqi_task_management_response { |
| struct pqi_iu_header header; |
| __le16 request_id; |
| __le16 nexus_id; |
| u8 additional_response_info[3]; |
| u8 response_code; |
| }; |
| |
| struct pqi_aio_error_info { |
| u8 status; |
| u8 service_response; |
| u8 data_present; |
| u8 reserved; |
| __le32 residual_count; |
| __le16 data_length; |
| __le16 reserved1; |
| u8 data[256]; |
| }; |
| |
| struct pqi_raid_error_info { |
| u8 data_in_result; |
| u8 data_out_result; |
| u8 reserved[3]; |
| u8 status; |
| __le16 status_qualifier; |
| __le16 sense_data_length; |
| __le16 response_data_length; |
| __le32 data_in_transferred; |
| __le32 data_out_transferred; |
| u8 data[256]; |
| }; |
| |
| #define PQI_REQUEST_IU_TASK_MANAGEMENT 0x13 |
| #define PQI_REQUEST_IU_RAID_PATH_IO 0x14 |
| #define PQI_REQUEST_IU_AIO_PATH_IO 0x15 |
| #define PQI_REQUEST_IU_GENERAL_ADMIN 0x60 |
| #define PQI_REQUEST_IU_REPORT_VENDOR_EVENT_CONFIG 0x72 |
| #define PQI_REQUEST_IU_SET_VENDOR_EVENT_CONFIG 0x73 |
| #define PQI_REQUEST_IU_ACKNOWLEDGE_VENDOR_EVENT 0xf6 |
| |
| #define PQI_RESPONSE_IU_GENERAL_MANAGEMENT 0x81 |
| #define PQI_RESPONSE_IU_TASK_MANAGEMENT 0x93 |
| #define PQI_RESPONSE_IU_GENERAL_ADMIN 0xe0 |
| #define PQI_RESPONSE_IU_RAID_PATH_IO_SUCCESS 0xf0 |
| #define PQI_RESPONSE_IU_AIO_PATH_IO_SUCCESS 0xf1 |
| #define PQI_RESPONSE_IU_RAID_PATH_IO_ERROR 0xf2 |
| #define PQI_RESPONSE_IU_AIO_PATH_IO_ERROR 0xf3 |
| #define PQI_RESPONSE_IU_AIO_PATH_DISABLED 0xf4 |
| #define PQI_RESPONSE_IU_VENDOR_EVENT 0xf5 |
| |
| #define PQI_GENERAL_ADMIN_FUNCTION_REPORT_DEVICE_CAPABILITY 0x0 |
| #define PQI_GENERAL_ADMIN_FUNCTION_CREATE_IQ 0x10 |
| #define PQI_GENERAL_ADMIN_FUNCTION_CREATE_OQ 0x11 |
| #define PQI_GENERAL_ADMIN_FUNCTION_DELETE_IQ 0x12 |
| #define PQI_GENERAL_ADMIN_FUNCTION_DELETE_OQ 0x13 |
| #define PQI_GENERAL_ADMIN_FUNCTION_CHANGE_IQ_PROPERTY 0x14 |
| |
| #define PQI_GENERAL_ADMIN_STATUS_SUCCESS 0x0 |
| |
| #define PQI_IQ_PROPERTY_IS_AIO_QUEUE 0x1 |
| |
| #define PQI_GENERAL_ADMIN_IU_LENGTH 0x3c |
| #define PQI_PROTOCOL_SOP 0x0 |
| |
| #define PQI_DATA_IN_OUT_GOOD 0x0 |
| #define PQI_DATA_IN_OUT_UNDERFLOW 0x1 |
| #define PQI_DATA_IN_OUT_BUFFER_ERROR 0x40 |
| #define PQI_DATA_IN_OUT_BUFFER_OVERFLOW 0x41 |
| #define PQI_DATA_IN_OUT_BUFFER_OVERFLOW_DESCRIPTOR_AREA 0x42 |
| #define PQI_DATA_IN_OUT_BUFFER_OVERFLOW_BRIDGE 0x43 |
| #define PQI_DATA_IN_OUT_PCIE_FABRIC_ERROR 0x60 |
| #define PQI_DATA_IN_OUT_PCIE_COMPLETION_TIMEOUT 0x61 |
| #define PQI_DATA_IN_OUT_PCIE_COMPLETER_ABORT_RECEIVED 0x62 |
| #define PQI_DATA_IN_OUT_PCIE_UNSUPPORTED_REQUEST_RECEIVED 0x63 |
| #define PQI_DATA_IN_OUT_PCIE_ECRC_CHECK_FAILED 0x64 |
| #define PQI_DATA_IN_OUT_PCIE_UNSUPPORTED_REQUEST 0x65 |
| #define PQI_DATA_IN_OUT_PCIE_ACS_VIOLATION 0x66 |
| #define PQI_DATA_IN_OUT_PCIE_TLP_PREFIX_BLOCKED 0x67 |
| #define PQI_DATA_IN_OUT_PCIE_POISONED_MEMORY_READ 0x6F |
| #define PQI_DATA_IN_OUT_ERROR 0xf0 |
| #define PQI_DATA_IN_OUT_PROTOCOL_ERROR 0xf1 |
| #define PQI_DATA_IN_OUT_HARDWARE_ERROR 0xf2 |
| #define PQI_DATA_IN_OUT_UNSOLICITED_ABORT 0xf3 |
| #define PQI_DATA_IN_OUT_ABORTED 0xf4 |
| #define PQI_DATA_IN_OUT_TIMEOUT 0xf5 |
| |
| #define CISS_CMD_STATUS_SUCCESS 0x0 |
| #define CISS_CMD_STATUS_TARGET_STATUS 0x1 |
| #define CISS_CMD_STATUS_DATA_UNDERRUN 0x2 |
| #define CISS_CMD_STATUS_DATA_OVERRUN 0x3 |
| #define CISS_CMD_STATUS_INVALID 0x4 |
| #define CISS_CMD_STATUS_PROTOCOL_ERROR 0x5 |
| #define CISS_CMD_STATUS_HARDWARE_ERROR 0x6 |
| #define CISS_CMD_STATUS_CONNECTION_LOST 0x7 |
| #define CISS_CMD_STATUS_ABORTED 0x8 |
| #define CISS_CMD_STATUS_ABORT_FAILED 0x9 |
| #define CISS_CMD_STATUS_UNSOLICITED_ABORT 0xa |
| #define CISS_CMD_STATUS_TIMEOUT 0xb |
| #define CISS_CMD_STATUS_UNABORTABLE 0xc |
| #define CISS_CMD_STATUS_TMF 0xd |
| #define CISS_CMD_STATUS_AIO_DISABLED 0xe |
| |
| #define PQI_NUM_EVENT_QUEUE_ELEMENTS 32 |
| #define PQI_EVENT_OQ_ELEMENT_LENGTH sizeof(struct pqi_event_response) |
| |
| #define PQI_EVENT_TYPE_HOTPLUG 0x1 |
| #define PQI_EVENT_TYPE_HARDWARE 0x2 |
| #define PQI_EVENT_TYPE_PHYSICAL_DEVICE 0x4 |
| #define PQI_EVENT_TYPE_LOGICAL_DEVICE 0x5 |
| #define PQI_EVENT_TYPE_AIO_STATE_CHANGE 0xfd |
| #define PQI_EVENT_TYPE_AIO_CONFIG_CHANGE 0xfe |
| |
| #pragma pack() |
| |
| #define PQI_ERROR_BUFFER_ELEMENT_LENGTH \ |
| sizeof(struct pqi_raid_error_info) |
| |
| /* these values are based on our implementation */ |
| #define PQI_ADMIN_IQ_NUM_ELEMENTS 8 |
| #define PQI_ADMIN_OQ_NUM_ELEMENTS 20 |
| #define PQI_ADMIN_IQ_ELEMENT_LENGTH 64 |
| #define PQI_ADMIN_OQ_ELEMENT_LENGTH 64 |
| |
| #define PQI_OPERATIONAL_IQ_ELEMENT_LENGTH 128 |
| #define PQI_OPERATIONAL_OQ_ELEMENT_LENGTH 16 |
| |
| #define PQI_MIN_MSIX_VECTORS 1 |
| #define PQI_MAX_MSIX_VECTORS 64 |
| |
| /* these values are defined by the PQI spec */ |
| #define PQI_MAX_NUM_ELEMENTS_ADMIN_QUEUE 255 |
| #define PQI_MAX_NUM_ELEMENTS_OPERATIONAL_QUEUE 65535 |
| #define PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT 64 |
| #define PQI_QUEUE_ELEMENT_LENGTH_ALIGNMENT 16 |
| #define PQI_ADMIN_INDEX_ALIGNMENT 64 |
| #define PQI_OPERATIONAL_INDEX_ALIGNMENT 4 |
| |
| #define PQI_MIN_OPERATIONAL_QUEUE_ID 1 |
| #define PQI_MAX_OPERATIONAL_QUEUE_ID 65535 |
| |
| #define PQI_AIO_SERV_RESPONSE_COMPLETE 0 |
| #define PQI_AIO_SERV_RESPONSE_FAILURE 1 |
| #define PQI_AIO_SERV_RESPONSE_TMF_COMPLETE 2 |
| #define PQI_AIO_SERV_RESPONSE_TMF_SUCCEEDED 3 |
| #define PQI_AIO_SERV_RESPONSE_TMF_REJECTED 4 |
| #define PQI_AIO_SERV_RESPONSE_TMF_INCORRECT_LUN 5 |
| |
| #define PQI_AIO_STATUS_IO_ERROR 0x1 |
| #define PQI_AIO_STATUS_IO_ABORTED 0x2 |
| #define PQI_AIO_STATUS_NO_PATH_TO_DEVICE 0x3 |
| #define PQI_AIO_STATUS_INVALID_DEVICE 0x4 |
| #define PQI_AIO_STATUS_AIO_PATH_DISABLED 0xe |
| #define PQI_AIO_STATUS_UNDERRUN 0x51 |
| #define PQI_AIO_STATUS_OVERRUN 0x75 |
| |
| typedef u32 pqi_index_t; |
| |
| /* SOP data direction flags */ |
| #define SOP_NO_DIRECTION_FLAG 0 |
| #define SOP_WRITE_FLAG 1 /* host writes data to Data-Out */ |
| /* buffer */ |
| #define SOP_READ_FLAG 2 /* host receives data from Data-In */ |
| /* buffer */ |
| #define SOP_BIDIRECTIONAL 3 /* data is transferred from the */ |
| /* Data-Out buffer and data is */ |
| /* transferred to the Data-In buffer */ |
| |
| #define SOP_TASK_ATTRIBUTE_SIMPLE 0 |
| #define SOP_TASK_ATTRIBUTE_HEAD_OF_QUEUE 1 |
| #define SOP_TASK_ATTRIBUTE_ORDERED 2 |
| #define SOP_TASK_ATTRIBUTE_ACA 4 |
| |
| #define SOP_TMF_COMPLETE 0x0 |
| #define SOP_TMF_FUNCTION_SUCCEEDED 0x8 |
| |
| /* additional CDB bytes usage field codes */ |
| #define SOP_ADDITIONAL_CDB_BYTES_0 0 /* 16-byte CDB */ |
| #define SOP_ADDITIONAL_CDB_BYTES_4 1 /* 20-byte CDB */ |
| #define SOP_ADDITIONAL_CDB_BYTES_8 2 /* 24-byte CDB */ |
| #define SOP_ADDITIONAL_CDB_BYTES_12 3 /* 28-byte CDB */ |
| #define SOP_ADDITIONAL_CDB_BYTES_16 4 /* 32-byte CDB */ |
| |
| /* |
| * The purpose of this structure is to obtain proper alignment of objects in |
| * an admin queue pair. |
| */ |
| struct pqi_admin_queues_aligned { |
| __aligned(PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT) |
| u8 iq_element_array[PQI_ADMIN_IQ_ELEMENT_LENGTH] |
| [PQI_ADMIN_IQ_NUM_ELEMENTS]; |
| __aligned(PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT) |
| u8 oq_element_array[PQI_ADMIN_OQ_ELEMENT_LENGTH] |
| [PQI_ADMIN_OQ_NUM_ELEMENTS]; |
| __aligned(PQI_ADMIN_INDEX_ALIGNMENT) pqi_index_t iq_ci; |
| __aligned(PQI_ADMIN_INDEX_ALIGNMENT) pqi_index_t oq_pi; |
| }; |
| |
| struct pqi_admin_queues { |
| void *iq_element_array; |
| void *oq_element_array; |
| volatile pqi_index_t *iq_ci; |
| volatile pqi_index_t *oq_pi; |
| dma_addr_t iq_element_array_bus_addr; |
| dma_addr_t oq_element_array_bus_addr; |
| dma_addr_t iq_ci_bus_addr; |
| dma_addr_t oq_pi_bus_addr; |
| __le32 __iomem *iq_pi; |
| pqi_index_t iq_pi_copy; |
| __le32 __iomem *oq_ci; |
| pqi_index_t oq_ci_copy; |
| struct task_struct *task; |
| u16 int_msg_num; |
| }; |
| |
| struct pqi_queue_group { |
| struct pqi_ctrl_info *ctrl_info; /* backpointer */ |
| u16 iq_id[2]; |
| u16 oq_id; |
| u16 int_msg_num; |
| void *iq_element_array[2]; |
| void *oq_element_array; |
| dma_addr_t iq_element_array_bus_addr[2]; |
| dma_addr_t oq_element_array_bus_addr; |
| __le32 __iomem *iq_pi[2]; |
| pqi_index_t iq_pi_copy[2]; |
| volatile pqi_index_t *iq_ci[2]; |
| volatile pqi_index_t *oq_pi; |
| dma_addr_t iq_ci_bus_addr[2]; |
| dma_addr_t oq_pi_bus_addr; |
| __le32 __iomem *oq_ci; |
| pqi_index_t oq_ci_copy; |
| spinlock_t submit_lock[2]; /* protect submission queue */ |
| struct list_head request_list[2]; |
| }; |
| |
| struct pqi_event_queue { |
| u16 oq_id; |
| u16 int_msg_num; |
| void *oq_element_array; |
| volatile pqi_index_t *oq_pi; |
| dma_addr_t oq_element_array_bus_addr; |
| dma_addr_t oq_pi_bus_addr; |
| __le32 __iomem *oq_ci; |
| pqi_index_t oq_ci_copy; |
| }; |
| |
| #define PQI_DEFAULT_QUEUE_GROUP 0 |
| #define PQI_MAX_QUEUE_GROUPS PQI_MAX_MSIX_VECTORS |
| |
| struct pqi_encryption_info { |
| u16 data_encryption_key_index; |
| u32 encrypt_tweak_lower; |
| u32 encrypt_tweak_upper; |
| }; |
| |
| #pragma pack(1) |
| |
| #define PQI_CONFIG_TABLE_SIGNATURE "CFGTABLE" |
| #define PQI_CONFIG_TABLE_MAX_LENGTH ((u16)~0) |
| |
| /* configuration table section IDs */ |
| #define PQI_CONFIG_TABLE_SECTION_GENERAL_INFO 0 |
| #define PQI_CONFIG_TABLE_SECTION_FIRMWARE_FEATURES 1 |
| #define PQI_CONFIG_TABLE_SECTION_FIRMWARE_ERRATA 2 |
| #define PQI_CONFIG_TABLE_SECTION_DEBUG 3 |
| #define PQI_CONFIG_TABLE_SECTION_HEARTBEAT 4 |
| |
| struct pqi_config_table { |
| u8 signature[8]; /* "CFGTABLE" */ |
| __le32 first_section_offset; /* offset in bytes from the base */ |
| /* address of this table to the */ |
| /* first section */ |
| }; |
| |
| struct pqi_config_table_section_header { |
| __le16 section_id; /* as defined by the */ |
| /* PQI_CONFIG_TABLE_SECTION_* */ |
| /* manifest constants above */ |
| __le16 next_section_offset; /* offset in bytes from base */ |
| /* address of the table of the */ |
| /* next section or 0 if last entry */ |
| }; |
| |
| struct pqi_config_table_general_info { |
| struct pqi_config_table_section_header header; |
| __le32 section_length; /* size of this section in bytes */ |
| /* including the section header */ |
| __le32 max_outstanding_requests; /* max. outstanding */ |
| /* commands supported by */ |
| /* the controller */ |
| __le32 max_sg_size; /* max. transfer size of a single */ |
| /* command */ |
| __le32 max_sg_per_request; /* max. number of scatter-gather */ |
| /* entries supported in a single */ |
| /* command */ |
| }; |
| |
| struct pqi_config_table_debug { |
| struct pqi_config_table_section_header header; |
| __le32 scratchpad; |
| }; |
| |
| struct pqi_config_table_heartbeat { |
| struct pqi_config_table_section_header header; |
| __le32 heartbeat_counter; |
| }; |
| |
| union pqi_reset_register { |
| struct { |
| u32 reset_type : 3; |
| u32 reserved : 2; |
| u32 reset_action : 3; |
| u32 hold_in_pd1 : 1; |
| u32 reserved2 : 23; |
| } bits; |
| u32 all_bits; |
| }; |
| |
| #define PQI_RESET_ACTION_RESET 0x1 |
| |
| #define PQI_RESET_TYPE_NO_RESET 0x0 |
| #define PQI_RESET_TYPE_SOFT_RESET 0x1 |
| #define PQI_RESET_TYPE_FIRM_RESET 0x2 |
| #define PQI_RESET_TYPE_HARD_RESET 0x3 |
| |
| #define PQI_RESET_ACTION_COMPLETED 0x2 |
| |
| #define PQI_RESET_POLL_INTERVAL_MSECS 100 |
| |
| #define PQI_MAX_OUTSTANDING_REQUESTS ((u32)~0) |
| #define PQI_MAX_OUTSTANDING_REQUESTS_KDUMP 32 |
| #define PQI_MAX_TRANSFER_SIZE (1024U * 1024U) |
| #define PQI_MAX_TRANSFER_SIZE_KDUMP (512 * 1024U) |
| |
| #define RAID_MAP_MAX_ENTRIES 1024 |
| |
| #define PQI_PHYSICAL_DEVICE_BUS 0 |
| #define PQI_RAID_VOLUME_BUS 1 |
| #define PQI_HBA_BUS 2 |
| #define PQI_EXTERNAL_RAID_VOLUME_BUS 3 |
| #define PQI_MAX_BUS PQI_EXTERNAL_RAID_VOLUME_BUS |
| |
| struct report_lun_header { |
| __be32 list_length; |
| u8 extended_response; |
| u8 reserved[3]; |
| }; |
| |
| struct report_log_lun_extended_entry { |
| u8 lunid[8]; |
| u8 volume_id[16]; |
| }; |
| |
| struct report_log_lun_extended { |
| struct report_lun_header header; |
| struct report_log_lun_extended_entry lun_entries[1]; |
| }; |
| |
| struct report_phys_lun_extended_entry { |
| u8 lunid[8]; |
| __be64 wwid; |
| u8 device_type; |
| u8 device_flags; |
| u8 lun_count; /* number of LUNs in a multi-LUN device */ |
| u8 redundant_paths; |
| u32 aio_handle; |
| }; |
| |
| /* for device_flags field of struct report_phys_lun_extended_entry */ |
| #define REPORT_PHYS_LUN_DEV_FLAG_AIO_ENABLED 0x8 |
| |
| struct report_phys_lun_extended { |
| struct report_lun_header header; |
| struct report_phys_lun_extended_entry lun_entries[1]; |
| }; |
| |
| struct raid_map_disk_data { |
| u32 aio_handle; |
| u8 xor_mult[2]; |
| u8 reserved[2]; |
| }; |
| |
| /* constants for flags field of RAID map */ |
| #define RAID_MAP_ENCRYPTION_ENABLED 0x1 |
| |
| struct raid_map { |
| __le32 structure_size; /* size of entire structure in bytes */ |
| __le32 volume_blk_size; /* bytes / block in the volume */ |
| __le64 volume_blk_cnt; /* logical blocks on the volume */ |
| u8 phys_blk_shift; /* shift factor to convert between */ |
| /* units of logical blocks and */ |
| /* physical disk blocks */ |
| u8 parity_rotation_shift; /* shift factor to convert between */ |
| /* units of logical stripes and */ |
| /* physical stripes */ |
| __le16 strip_size; /* blocks used on each disk / stripe */ |
| __le64 disk_starting_blk; /* first disk block used in volume */ |
| __le64 disk_blk_cnt; /* disk blocks used by volume / disk */ |
| __le16 data_disks_per_row; /* data disk entries / row in the map */ |
| __le16 metadata_disks_per_row; /* mirror/parity disk entries / row */ |
| /* in the map */ |
| __le16 row_cnt; /* rows in each layout map */ |
| __le16 layout_map_count; /* layout maps (1 map per */ |
| /* mirror parity group) */ |
| __le16 flags; |
| __le16 data_encryption_key_index; |
| u8 reserved[16]; |
| struct raid_map_disk_data disk_data[RAID_MAP_MAX_ENTRIES]; |
| }; |
| |
| #pragma pack() |
| |
| #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" |
| |
| struct pqi_scsi_dev { |
| int devtype; /* as reported by INQUIRY commmand */ |
| u8 device_type; /* as reported by */ |
| /* BMIC_IDENTIFY_PHYSICAL_DEVICE */ |
| /* only valid for devtype = TYPE_DISK */ |
| int bus; |
| int target; |
| int lun; |
| u8 scsi3addr[8]; |
| __be64 wwid; |
| u8 volume_id[16]; |
| u8 is_physical_device : 1; |
| u8 is_external_raid_device : 1; |
| u8 target_lun_valid : 1; |
| u8 device_gone : 1; |
| u8 new_device : 1; |
| u8 keep_device : 1; |
| u8 volume_offline : 1; |
| bool aio_enabled; /* only valid for physical disks */ |
| bool in_reset; |
| bool device_offline; |
| u8 vendor[8]; /* bytes 8-15 of inquiry data */ |
| u8 model[16]; /* bytes 16-31 of inquiry data */ |
| u64 sas_address; |
| u8 raid_level; |
| u16 queue_depth; /* max. queue_depth for this device */ |
| u16 advertised_queue_depth; |
| u32 aio_handle; |
| u8 volume_status; |
| u8 active_path_index; |
| u8 path_map; |
| u8 bay; |
| u8 box[8]; |
| u16 phys_connector[8]; |
| bool raid_bypass_configured; /* RAID bypass configured */ |
| bool raid_bypass_enabled; /* RAID bypass enabled */ |
| int offload_to_mirror; /* Send next RAID bypass request */ |
| /* to mirror drive. */ |
| struct raid_map *raid_map; /* RAID bypass map */ |
| |
| struct pqi_sas_port *sas_port; |
| struct scsi_device *sdev; |
| |
| struct list_head scsi_device_list_entry; |
| struct list_head new_device_list_entry; |
| struct list_head add_list_entry; |
| struct list_head delete_list_entry; |
| |
| atomic_t scsi_cmds_outstanding; |
| }; |
| |
| /* VPD inquiry pages */ |
| #define SCSI_VPD_SUPPORTED_PAGES 0x0 /* standard page */ |
| #define SCSI_VPD_DEVICE_ID 0x83 /* standard page */ |
| #define CISS_VPD_LV_DEVICE_GEOMETRY 0xc1 /* vendor-specific page */ |
| #define CISS_VPD_LV_BYPASS_STATUS 0xc2 /* vendor-specific page */ |
| #define CISS_VPD_LV_STATUS 0xc3 /* vendor-specific page */ |
| |
| #define VPD_PAGE (1 << 8) |
| |
| #pragma pack(1) |
| |
| /* structure for CISS_VPD_LV_STATUS */ |
| struct ciss_vpd_logical_volume_status { |
| u8 peripheral_info; |
| u8 page_code; |
| u8 reserved; |
| u8 page_length; |
| u8 volume_status; |
| u8 reserved2[3]; |
| __be32 flags; |
| }; |
| |
| #pragma pack() |
| |
| /* constants for volume_status field of ciss_vpd_logical_volume_status */ |
| #define CISS_LV_OK 0 |
| #define CISS_LV_FAILED 1 |
| #define CISS_LV_NOT_CONFIGURED 2 |
| #define CISS_LV_DEGRADED 3 |
| #define CISS_LV_READY_FOR_RECOVERY 4 |
| #define CISS_LV_UNDERGOING_RECOVERY 5 |
| #define CISS_LV_WRONG_PHYSICAL_DRIVE_REPLACED 6 |
| #define CISS_LV_PHYSICAL_DRIVE_CONNECTION_PROBLEM 7 |
| #define CISS_LV_HARDWARE_OVERHEATING 8 |
| #define CISS_LV_HARDWARE_HAS_OVERHEATED 9 |
| #define CISS_LV_UNDERGOING_EXPANSION 10 |
| #define CISS_LV_NOT_AVAILABLE 11 |
| #define CISS_LV_QUEUED_FOR_EXPANSION 12 |
| #define CISS_LV_DISABLED_SCSI_ID_CONFLICT 13 |
| #define CISS_LV_EJECTED 14 |
| #define CISS_LV_UNDERGOING_ERASE 15 |
| /* state 16 not used */ |
| #define CISS_LV_READY_FOR_PREDICTIVE_SPARE_REBUILD 17 |
| #define CISS_LV_UNDERGOING_RPI 18 |
| #define CISS_LV_PENDING_RPI 19 |
| #define CISS_LV_ENCRYPTED_NO_KEY 20 |
| /* state 21 not used */ |
| #define CISS_LV_UNDERGOING_ENCRYPTION 22 |
| #define CISS_LV_UNDERGOING_ENCRYPTION_REKEYING 23 |
| #define CISS_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER 24 |
| #define CISS_LV_PENDING_ENCRYPTION 25 |
| #define CISS_LV_PENDING_ENCRYPTION_REKEYING 26 |
| #define CISS_LV_NOT_SUPPORTED 27 |
| #define CISS_LV_STATUS_UNAVAILABLE 255 |
| |
| /* constants for flags field of ciss_vpd_logical_volume_status */ |
| #define CISS_LV_FLAGS_NO_HOST_IO 0x1 /* volume not available for */ |
| /* host I/O */ |
| |
| /* for SAS hosts and SAS expanders */ |
| struct pqi_sas_node { |
| struct device *parent_dev; |
| struct list_head port_list_head; |
| }; |
| |
| struct pqi_sas_port { |
| struct list_head port_list_entry; |
| u64 sas_address; |
| struct sas_port *port; |
| int next_phy_index; |
| struct list_head phy_list_head; |
| struct pqi_sas_node *parent_node; |
| struct sas_rphy *rphy; |
| }; |
| |
| struct pqi_sas_phy { |
| struct list_head phy_list_entry; |
| struct sas_phy *phy; |
| struct pqi_sas_port *parent_port; |
| bool added_to_port; |
| }; |
| |
| struct pqi_io_request { |
| atomic_t refcount; |
| u16 index; |
| void (*io_complete_callback)(struct pqi_io_request *io_request, |
| void *context); |
| void *context; |
| u8 raid_bypass : 1; |
| int status; |
| struct pqi_queue_group *queue_group; |
| struct scsi_cmnd *scmd; |
| void *error_info; |
| struct pqi_sg_descriptor *sg_chain_buffer; |
| dma_addr_t sg_chain_buffer_dma_handle; |
| void *iu; |
| struct list_head request_list_entry; |
| }; |
| |
| #define PQI_NUM_SUPPORTED_EVENTS 6 |
| |
| struct pqi_event { |
| bool pending; |
| u8 event_type; |
| __le16 event_id; |
| __le32 additional_event_id; |
| }; |
| |
| #define PQI_RESERVED_IO_SLOTS_LUN_RESET 1 |
| #define PQI_RESERVED_IO_SLOTS_EVENT_ACK PQI_NUM_SUPPORTED_EVENTS |
| #define PQI_RESERVED_IO_SLOTS_SYNCHRONOUS_REQUESTS 3 |
| #define PQI_RESERVED_IO_SLOTS \ |
| (PQI_RESERVED_IO_SLOTS_LUN_RESET + PQI_RESERVED_IO_SLOTS_EVENT_ACK + \ |
| PQI_RESERVED_IO_SLOTS_SYNCHRONOUS_REQUESTS) |
| |
| struct pqi_ctrl_info { |
| unsigned int ctrl_id; |
| struct pci_dev *pci_dev; |
| char firmware_version[11]; |
| void __iomem *iomem_base; |
| struct pqi_ctrl_registers __iomem *registers; |
| struct pqi_device_registers __iomem *pqi_registers; |
| u32 max_sg_entries; |
| u32 config_table_offset; |
| u32 config_table_length; |
| u16 max_inbound_queues; |
| u16 max_elements_per_iq; |
| u16 max_iq_element_length; |
| u16 max_outbound_queues; |
| u16 max_elements_per_oq; |
| u16 max_oq_element_length; |
| u32 max_transfer_size; |
| u32 max_outstanding_requests; |
| u32 max_io_slots; |
| unsigned int scsi_ml_can_queue; |
| unsigned short sg_tablesize; |
| unsigned int max_sectors; |
| u32 error_buffer_length; |
| void *error_buffer; |
| dma_addr_t error_buffer_dma_handle; |
| size_t sg_chain_buffer_length; |
| unsigned int num_queue_groups; |
| u16 max_hw_queue_index; |
| u16 num_elements_per_iq; |
| u16 num_elements_per_oq; |
| u16 max_inbound_iu_length_per_firmware; |
| u16 max_inbound_iu_length; |
| unsigned int max_sg_per_iu; |
| void *admin_queue_memory_base; |
| u32 admin_queue_memory_length; |
| dma_addr_t admin_queue_memory_base_dma_handle; |
| void *queue_memory_base; |
| u32 queue_memory_length; |
| dma_addr_t queue_memory_base_dma_handle; |
| struct pqi_admin_queues admin_queues; |
| struct pqi_queue_group queue_groups[PQI_MAX_QUEUE_GROUPS]; |
| struct pqi_event_queue event_queue; |
| enum pqi_irq_mode irq_mode; |
| int max_msix_vectors; |
| int num_msix_vectors_enabled; |
| int num_msix_vectors_initialized; |
| int event_irq; |
| struct Scsi_Host *scsi_host; |
| |
| struct mutex scan_mutex; |
| struct mutex lun_reset_mutex; |
| bool controller_online; |
| bool block_requests; |
| u8 inbound_spanning_supported : 1; |
| u8 outbound_spanning_supported : 1; |
| u8 pqi_mode_enabled : 1; |
| u8 pqi_reset_quiesce_supported : 1; |
| |
| struct list_head scsi_device_list; |
| spinlock_t scsi_device_list_lock; |
| |
| struct delayed_work rescan_work; |
| struct delayed_work update_time_work; |
| |
| struct pqi_sas_node *sas_host; |
| u64 sas_address; |
| |
| struct pqi_io_request *io_request_pool; |
| u16 next_io_request_slot; |
| |
| struct pqi_event events[PQI_NUM_SUPPORTED_EVENTS]; |
| struct work_struct event_work; |
| |
| atomic_t num_interrupts; |
| int previous_num_interrupts; |
| u32 previous_heartbeat_count; |
| __le32 __iomem *heartbeat_counter; |
| struct timer_list heartbeat_timer; |
| struct work_struct ctrl_offline_work; |
| |
| struct semaphore sync_request_sem; |
| atomic_t num_busy_threads; |
| atomic_t num_blocked_threads; |
| wait_queue_head_t block_requests_wait; |
| |
| struct list_head raid_bypass_retry_list; |
| spinlock_t raid_bypass_retry_list_lock; |
| struct work_struct raid_bypass_retry_work; |
| }; |
| |
| enum pqi_ctrl_mode { |
| SIS_MODE = 0, |
| PQI_MODE |
| }; |
| |
| /* |
| * assume worst case: SATA queue depth of 31 minus 4 internal firmware commands |
| */ |
| #define PQI_PHYSICAL_DISK_DEFAULT_MAX_QUEUE_DEPTH 27 |
| |
| /* CISS commands */ |
| #define CISS_READ 0xc0 |
| #define CISS_REPORT_LOG 0xc2 /* Report Logical LUNs */ |
| #define CISS_REPORT_PHYS 0xc3 /* Report Physical LUNs */ |
| #define CISS_GET_RAID_MAP 0xc8 |
| |
| /* constants for CISS_REPORT_LOG/CISS_REPORT_PHYS commands */ |
| #define CISS_REPORT_LOG_EXTENDED 0x1 |
| #define CISS_REPORT_PHYS_EXTENDED 0x2 |
| |
| /* BMIC commands */ |
| #define BMIC_IDENTIFY_CONTROLLER 0x11 |
| #define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15 |
| #define BMIC_READ 0x26 |
| #define BMIC_WRITE 0x27 |
| #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64 |
| #define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66 |
| #define BMIC_WRITE_HOST_WELLNESS 0xa5 |
| #define BMIC_FLUSH_CACHE 0xc2 |
| |
| #define SA_FLUSH_CACHE 0x1 |
| |
| #define MASKED_DEVICE(lunid) ((lunid)[3] & 0xc0) |
| #define CISS_GET_LEVEL_2_BUS(lunid) ((lunid)[7] & 0x3f) |
| #define CISS_GET_LEVEL_2_TARGET(lunid) ((lunid)[6]) |
| #define CISS_GET_DRIVE_NUMBER(lunid) \ |
| (((CISS_GET_LEVEL_2_BUS((lunid)) - 1) << 8) + \ |
| CISS_GET_LEVEL_2_TARGET((lunid))) |
| |
| #define NO_TIMEOUT ((unsigned long) -1) |
| |
| #pragma pack(1) |
| |
| struct bmic_identify_controller { |
| u8 configured_logical_drive_count; |
| __le32 configuration_signature; |
| u8 firmware_version[4]; |
| u8 reserved[145]; |
| __le16 extended_logical_unit_count; |
| u8 reserved1[34]; |
| __le16 firmware_build_number; |
| u8 reserved2[100]; |
| u8 controller_mode; |
| u8 reserved3[32]; |
| }; |
| |
| struct bmic_identify_physical_device { |
| u8 scsi_bus; /* SCSI Bus number on controller */ |
| u8 scsi_id; /* SCSI ID on this bus */ |
| __le16 block_size; /* sector size in bytes */ |
| __le32 total_blocks; /* number for sectors on drive */ |
| __le32 reserved_blocks; /* controller reserved (RIS) */ |
| u8 model[40]; /* Physical Drive Model */ |
| u8 serial_number[40]; /* Drive Serial Number */ |
| u8 firmware_revision[8]; /* drive firmware revision */ |
| u8 scsi_inquiry_bits; /* inquiry byte 7 bits */ |
| u8 compaq_drive_stamp; /* 0 means drive not stamped */ |
| u8 last_failure_reason; |
| u8 flags; |
| u8 more_flags; |
| u8 scsi_lun; /* SCSI LUN for phys drive */ |
| u8 yet_more_flags; |
| u8 even_more_flags; |
| __le32 spi_speed_rules; |
| u8 phys_connector[2]; /* connector number on controller */ |
| u8 phys_box_on_bus; /* phys enclosure this drive resides */ |
| u8 phys_bay_in_box; /* phys drv bay this drive resides */ |
| __le32 rpm; /* drive rotational speed in RPM */ |
| u8 device_type; /* type of drive */ |
| u8 sata_version; /* only valid when device_type = */ |
| /* BMIC_DEVICE_TYPE_SATA */ |
| __le64 big_total_block_count; |
| __le64 ris_starting_lba; |
| __le32 ris_size; |
| u8 wwid[20]; |
| u8 controller_phy_map[32]; |
| __le16 phy_count; |
| u8 phy_connected_dev_type[256]; |
| u8 phy_to_drive_bay_num[256]; |
| __le16 phy_to_attached_dev_index[256]; |
| u8 box_index; |
| u8 reserved; |
| __le16 extra_physical_drive_flags; |
| u8 negotiated_link_rate[256]; |
| u8 phy_to_phy_map[256]; |
| u8 redundant_path_present_map; |
| u8 redundant_path_failure_map; |
| u8 active_path_number; |
| __le16 alternate_paths_phys_connector[8]; |
| u8 alternate_paths_phys_box_on_port[8]; |
| u8 multi_lun_device_lun_count; |
| u8 minimum_good_fw_revision[8]; |
| u8 unique_inquiry_bytes[20]; |
| u8 current_temperature_degrees; |
| u8 temperature_threshold_degrees; |
| u8 max_temperature_degrees; |
| u8 logical_blocks_per_phys_block_exp; |
| __le16 current_queue_depth_limit; |
| u8 switch_name[10]; |
| __le16 switch_port; |
| u8 alternate_paths_switch_name[40]; |
| u8 alternate_paths_switch_port[8]; |
| __le16 power_on_hours; |
| __le16 percent_endurance_used; |
| u8 drive_authentication; |
| u8 smart_carrier_authentication; |
| u8 smart_carrier_app_fw_version; |
| u8 smart_carrier_bootloader_fw_version; |
| u8 sanitize_flags; |
| u8 encryption_key_flags; |
| u8 encryption_key_name[64]; |
| __le32 misc_drive_flags; |
| __le16 dek_index; |
| __le16 hba_drive_encryption_flags; |
| __le16 max_overwrite_time; |
| __le16 max_block_erase_time; |
| __le16 max_crypto_erase_time; |
| u8 connector_info[5]; |
| u8 connector_name[8][8]; |
| u8 page_83_identifier[16]; |
| u8 maximum_link_rate[256]; |
| u8 negotiated_physical_link_rate[256]; |
| u8 box_connector_name[8]; |
| u8 padding_to_multiple_of_512[9]; |
| }; |
| |
| struct bmic_flush_cache { |
| u8 disable_flag; |
| u8 system_power_action; |
| u8 ndu_flush; |
| u8 shutdown_event; |
| u8 reserved[28]; |
| }; |
| |
| /* for shutdown_event member of struct bmic_flush_cache */ |
| enum bmic_flush_cache_shutdown_event { |
| NONE_CACHE_FLUSH_ONLY = 0, |
| SHUTDOWN = 1, |
| HIBERNATE = 2, |
| SUSPEND = 3, |
| RESTART = 4 |
| }; |
| |
| #pragma pack() |
| |
| int pqi_add_sas_host(struct Scsi_Host *shost, struct pqi_ctrl_info *ctrl_info); |
| void pqi_delete_sas_host(struct pqi_ctrl_info *ctrl_info); |
| int pqi_add_sas_device(struct pqi_sas_node *pqi_sas_node, |
| struct pqi_scsi_dev *device); |
| void pqi_remove_sas_device(struct pqi_scsi_dev *device); |
| struct pqi_scsi_dev *pqi_find_device_by_sas_rphy( |
| struct pqi_ctrl_info *ctrl_info, struct sas_rphy *rphy); |
| void pqi_prep_for_scsi_done(struct scsi_cmnd *scmd); |
| |
| extern struct sas_function_template pqi_sas_transport_functions; |
| |
| #endif /* _SMARTPQI_H */ |