| /* |
| * sd_dif.c - SCSI Data Integrity Field |
| * |
| * Copyright (C) 2007, 2008 Oracle Corporation |
| * Written by: Martin K. Petersen <martin.petersen@oracle.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, write to |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, |
| * USA. |
| * |
| */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/t10-pi.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_driver.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_ioctl.h> |
| #include <scsi/scsicam.h> |
| |
| #include "sd.h" |
| |
| /* |
| * Configure exchange of protection information between OS and HBA. |
| */ |
| void sd_dif_config_host(struct scsi_disk *sdkp) |
| { |
| struct scsi_device *sdp = sdkp->device; |
| struct gendisk *disk = sdkp->disk; |
| u8 type = sdkp->protection_type; |
| struct blk_integrity bi; |
| int dif, dix; |
| |
| dif = scsi_host_dif_capable(sdp->host, type); |
| dix = scsi_host_dix_capable(sdp->host, type); |
| |
| if (!dix && scsi_host_dix_capable(sdp->host, 0)) { |
| dif = 0; dix = 1; |
| } |
| |
| if (!dix) |
| return; |
| |
| memset(&bi, 0, sizeof(bi)); |
| |
| /* Enable DMA of protection information */ |
| if (scsi_host_get_guard(sdkp->device->host) & SHOST_DIX_GUARD_IP) { |
| if (type == T10_PI_TYPE3_PROTECTION) |
| bi.profile = &t10_pi_type3_ip; |
| else |
| bi.profile = &t10_pi_type1_ip; |
| |
| bi.flags |= BLK_INTEGRITY_IP_CHECKSUM; |
| } else |
| if (type == T10_PI_TYPE3_PROTECTION) |
| bi.profile = &t10_pi_type3_crc; |
| else |
| bi.profile = &t10_pi_type1_crc; |
| |
| bi.tuple_size = sizeof(struct t10_pi_tuple); |
| sd_printk(KERN_NOTICE, sdkp, |
| "Enabling DIX %s protection\n", bi.profile->name); |
| |
| if (dif && type) { |
| bi.flags |= BLK_INTEGRITY_DEVICE_CAPABLE; |
| |
| if (!sdkp->ATO) |
| goto out; |
| |
| if (type == T10_PI_TYPE3_PROTECTION) |
| bi.tag_size = sizeof(u16) + sizeof(u32); |
| else |
| bi.tag_size = sizeof(u16); |
| |
| sd_printk(KERN_NOTICE, sdkp, "DIF application tag size %u\n", |
| bi.tag_size); |
| } |
| |
| out: |
| blk_integrity_register(disk, &bi); |
| } |
| |
| /* |
| * The virtual start sector is the one that was originally submitted |
| * by the block layer. Due to partitioning, MD/DM cloning, etc. the |
| * actual physical start sector is likely to be different. Remap |
| * protection information to match the physical LBA. |
| * |
| * From a protocol perspective there's a slight difference between |
| * Type 1 and 2. The latter uses 32-byte CDBs exclusively, and the |
| * reference tag is seeded in the CDB. This gives us the potential to |
| * avoid virt->phys remapping during write. However, at read time we |
| * don't know whether the virt sector is the same as when we wrote it |
| * (we could be reading from real disk as opposed to MD/DM device. So |
| * we always remap Type 2 making it identical to Type 1. |
| * |
| * Type 3 does not have a reference tag so no remapping is required. |
| */ |
| void sd_dif_prepare(struct scsi_cmnd *scmd) |
| { |
| const int tuple_sz = sizeof(struct t10_pi_tuple); |
| struct bio *bio; |
| struct scsi_disk *sdkp; |
| struct t10_pi_tuple *pi; |
| u32 phys, virt; |
| |
| sdkp = scsi_disk(scmd->request->rq_disk); |
| |
| if (sdkp->protection_type == T10_PI_TYPE3_PROTECTION) |
| return; |
| |
| phys = scsi_prot_ref_tag(scmd); |
| |
| __rq_for_each_bio(bio, scmd->request) { |
| struct bio_integrity_payload *bip = bio_integrity(bio); |
| struct bio_vec iv; |
| struct bvec_iter iter; |
| unsigned int j; |
| |
| /* Already remapped? */ |
| if (bip->bip_flags & BIP_MAPPED_INTEGRITY) |
| break; |
| |
| virt = bip_get_seed(bip) & 0xffffffff; |
| |
| bip_for_each_vec(iv, bip, iter) { |
| pi = kmap_atomic(iv.bv_page) + iv.bv_offset; |
| |
| for (j = 0; j < iv.bv_len; j += tuple_sz, pi++) { |
| |
| if (be32_to_cpu(pi->ref_tag) == virt) |
| pi->ref_tag = cpu_to_be32(phys); |
| |
| virt++; |
| phys++; |
| } |
| |
| kunmap_atomic(pi); |
| } |
| |
| bip->bip_flags |= BIP_MAPPED_INTEGRITY; |
| } |
| } |
| |
| /* |
| * Remap physical sector values in the reference tag to the virtual |
| * values expected by the block layer. |
| */ |
| void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes) |
| { |
| const int tuple_sz = sizeof(struct t10_pi_tuple); |
| struct scsi_disk *sdkp; |
| struct bio *bio; |
| struct t10_pi_tuple *pi; |
| unsigned int j, intervals; |
| u32 phys, virt; |
| |
| sdkp = scsi_disk(scmd->request->rq_disk); |
| |
| if (sdkp->protection_type == T10_PI_TYPE3_PROTECTION || good_bytes == 0) |
| return; |
| |
| intervals = good_bytes / scsi_prot_interval(scmd); |
| phys = scsi_prot_ref_tag(scmd); |
| |
| __rq_for_each_bio(bio, scmd->request) { |
| struct bio_integrity_payload *bip = bio_integrity(bio); |
| struct bio_vec iv; |
| struct bvec_iter iter; |
| |
| virt = bip_get_seed(bip) & 0xffffffff; |
| |
| bip_for_each_vec(iv, bip, iter) { |
| pi = kmap_atomic(iv.bv_page) + iv.bv_offset; |
| |
| for (j = 0; j < iv.bv_len; j += tuple_sz, pi++) { |
| |
| if (intervals == 0) { |
| kunmap_atomic(pi); |
| return; |
| } |
| |
| if (be32_to_cpu(pi->ref_tag) == phys) |
| pi->ref_tag = cpu_to_be32(virt); |
| |
| virt++; |
| phys++; |
| intervals--; |
| } |
| |
| kunmap_atomic(pi); |
| } |
| } |
| } |
| |