| /* |
| * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd |
| * http://www.samsung.com |
| * |
| * Copyright (C) 2013 Google, Inc |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/bcd.h> |
| #include <linux/regmap.h> |
| #include <linux/rtc.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/samsung/core.h> |
| #include <linux/mfd/samsung/irq.h> |
| #include <linux/mfd/samsung/rtc.h> |
| #include <linux/mfd/samsung/s2mps14.h> |
| |
| /* |
| * Maximum number of retries for checking changes in UDR field |
| * of S5M_RTC_UDR_CON register (to limit possible endless loop). |
| * |
| * After writing to RTC registers (setting time or alarm) read the UDR field |
| * in S5M_RTC_UDR_CON register. UDR is auto-cleared when data have |
| * been transferred. |
| */ |
| #define UDR_READ_RETRY_CNT 5 |
| |
| /* |
| * Registers used by the driver which are different between chipsets. |
| * |
| * Operations like read time and write alarm/time require updating |
| * specific fields in UDR register. These fields usually are auto-cleared |
| * (with some exceptions). |
| * |
| * Table of operations per device: |
| * |
| * Device | Write time | Read time | Write alarm |
| * ================================================= |
| * S5M8767 | UDR + TIME | | UDR |
| * S2MPS11/14 | WUDR | RUDR | WUDR + RUDR |
| * S2MPS13 | WUDR | RUDR | WUDR + AUDR |
| * S2MPS15 | WUDR | RUDR | AUDR |
| */ |
| struct s5m_rtc_reg_config { |
| /* Number of registers used for setting time/alarm0/alarm1 */ |
| unsigned int regs_count; |
| /* First register for time, seconds */ |
| unsigned int time; |
| /* RTC control register */ |
| unsigned int ctrl; |
| /* First register for alarm 0, seconds */ |
| unsigned int alarm0; |
| /* First register for alarm 1, seconds */ |
| unsigned int alarm1; |
| /* |
| * Register for update flag (UDR). Typically setting UDR field to 1 |
| * will enable update of time or alarm register. Then it will be |
| * auto-cleared after successful update. |
| */ |
| unsigned int udr_update; |
| /* Auto-cleared mask in UDR field for writing time and alarm */ |
| unsigned int autoclear_udr_mask; |
| /* |
| * Masks in UDR field for time and alarm operations. |
| * The read time mask can be 0. Rest should not. |
| */ |
| unsigned int read_time_udr_mask; |
| unsigned int write_time_udr_mask; |
| unsigned int write_alarm_udr_mask; |
| }; |
| |
| /* Register map for S5M8763 and S5M8767 */ |
| static const struct s5m_rtc_reg_config s5m_rtc_regs = { |
| .regs_count = 8, |
| .time = S5M_RTC_SEC, |
| .ctrl = S5M_ALARM1_CONF, |
| .alarm0 = S5M_ALARM0_SEC, |
| .alarm1 = S5M_ALARM1_SEC, |
| .udr_update = S5M_RTC_UDR_CON, |
| .autoclear_udr_mask = S5M_RTC_UDR_MASK, |
| .read_time_udr_mask = 0, /* Not needed */ |
| .write_time_udr_mask = S5M_RTC_UDR_MASK | S5M_RTC_TIME_EN_MASK, |
| .write_alarm_udr_mask = S5M_RTC_UDR_MASK, |
| }; |
| |
| /* Register map for S2MPS13 */ |
| static const struct s5m_rtc_reg_config s2mps13_rtc_regs = { |
| .regs_count = 7, |
| .time = S2MPS_RTC_SEC, |
| .ctrl = S2MPS_RTC_CTRL, |
| .alarm0 = S2MPS_ALARM0_SEC, |
| .alarm1 = S2MPS_ALARM1_SEC, |
| .udr_update = S2MPS_RTC_UDR_CON, |
| .autoclear_udr_mask = S2MPS_RTC_WUDR_MASK, |
| .read_time_udr_mask = S2MPS_RTC_RUDR_MASK, |
| .write_time_udr_mask = S2MPS_RTC_WUDR_MASK, |
| .write_alarm_udr_mask = S2MPS_RTC_WUDR_MASK | S2MPS13_RTC_AUDR_MASK, |
| }; |
| |
| /* Register map for S2MPS11/14 */ |
| static const struct s5m_rtc_reg_config s2mps14_rtc_regs = { |
| .regs_count = 7, |
| .time = S2MPS_RTC_SEC, |
| .ctrl = S2MPS_RTC_CTRL, |
| .alarm0 = S2MPS_ALARM0_SEC, |
| .alarm1 = S2MPS_ALARM1_SEC, |
| .udr_update = S2MPS_RTC_UDR_CON, |
| .autoclear_udr_mask = S2MPS_RTC_WUDR_MASK, |
| .read_time_udr_mask = S2MPS_RTC_RUDR_MASK, |
| .write_time_udr_mask = S2MPS_RTC_WUDR_MASK, |
| .write_alarm_udr_mask = S2MPS_RTC_WUDR_MASK | S2MPS_RTC_RUDR_MASK, |
| }; |
| |
| /* |
| * Register map for S2MPS15 - in comparison to S2MPS14 the WUDR and AUDR bits |
| * are swapped. |
| */ |
| static const struct s5m_rtc_reg_config s2mps15_rtc_regs = { |
| .regs_count = 7, |
| .time = S2MPS_RTC_SEC, |
| .ctrl = S2MPS_RTC_CTRL, |
| .alarm0 = S2MPS_ALARM0_SEC, |
| .alarm1 = S2MPS_ALARM1_SEC, |
| .udr_update = S2MPS_RTC_UDR_CON, |
| .autoclear_udr_mask = S2MPS_RTC_WUDR_MASK, |
| .read_time_udr_mask = S2MPS_RTC_RUDR_MASK, |
| .write_time_udr_mask = S2MPS15_RTC_WUDR_MASK, |
| .write_alarm_udr_mask = S2MPS15_RTC_AUDR_MASK, |
| }; |
| |
| struct s5m_rtc_info { |
| struct device *dev; |
| struct i2c_client *i2c; |
| struct sec_pmic_dev *s5m87xx; |
| struct regmap *regmap; |
| struct rtc_device *rtc_dev; |
| int irq; |
| enum sec_device_type device_type; |
| int rtc_24hr_mode; |
| const struct s5m_rtc_reg_config *regs; |
| }; |
| |
| static const struct regmap_config s5m_rtc_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S5M_RTC_REG_MAX, |
| }; |
| |
| static const struct regmap_config s2mps14_rtc_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = S2MPS_RTC_REG_MAX, |
| }; |
| |
| static void s5m8767_data_to_tm(u8 *data, struct rtc_time *tm, |
| int rtc_24hr_mode) |
| { |
| tm->tm_sec = data[RTC_SEC] & 0x7f; |
| tm->tm_min = data[RTC_MIN] & 0x7f; |
| if (rtc_24hr_mode) { |
| tm->tm_hour = data[RTC_HOUR] & 0x1f; |
| } else { |
| tm->tm_hour = data[RTC_HOUR] & 0x0f; |
| if (data[RTC_HOUR] & HOUR_PM_MASK) |
| tm->tm_hour += 12; |
| } |
| |
| tm->tm_wday = ffs(data[RTC_WEEKDAY] & 0x7f); |
| tm->tm_mday = data[RTC_DATE] & 0x1f; |
| tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1; |
| tm->tm_year = (data[RTC_YEAR1] & 0x7f) + 100; |
| tm->tm_yday = 0; |
| tm->tm_isdst = 0; |
| } |
| |
| static int s5m8767_tm_to_data(struct rtc_time *tm, u8 *data) |
| { |
| data[RTC_SEC] = tm->tm_sec; |
| data[RTC_MIN] = tm->tm_min; |
| |
| if (tm->tm_hour >= 12) |
| data[RTC_HOUR] = tm->tm_hour | HOUR_PM_MASK; |
| else |
| data[RTC_HOUR] = tm->tm_hour & ~HOUR_PM_MASK; |
| |
| data[RTC_WEEKDAY] = 1 << tm->tm_wday; |
| data[RTC_DATE] = tm->tm_mday; |
| data[RTC_MONTH] = tm->tm_mon + 1; |
| data[RTC_YEAR1] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0; |
| |
| if (tm->tm_year < 100) { |
| pr_err("RTC cannot handle the year %d\n", |
| 1900 + tm->tm_year); |
| return -EINVAL; |
| } else { |
| return 0; |
| } |
| } |
| |
| /* |
| * Read RTC_UDR_CON register and wait till UDR field is cleared. |
| * This indicates that time/alarm update ended. |
| */ |
| static int s5m8767_wait_for_udr_update(struct s5m_rtc_info *info) |
| { |
| int ret, retry = UDR_READ_RETRY_CNT; |
| unsigned int data; |
| |
| do { |
| ret = regmap_read(info->regmap, info->regs->udr_update, &data); |
| } while (--retry && (data & info->regs->autoclear_udr_mask) && !ret); |
| |
| if (!retry) |
| dev_err(info->dev, "waiting for UDR update, reached max number of retries\n"); |
| |
| return ret; |
| } |
| |
| static int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info, |
| struct rtc_wkalrm *alarm) |
| { |
| int ret; |
| unsigned int val; |
| |
| switch (info->device_type) { |
| case S5M8767X: |
| case S5M8763X: |
| ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val); |
| val &= S5M_ALARM0_STATUS; |
| break; |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2, |
| &val); |
| val &= S2MPS_ALARM0_STATUS; |
| break; |
| default: |
| return -EINVAL; |
| } |
| if (ret < 0) |
| return ret; |
| |
| if (val) |
| alarm->pending = 1; |
| else |
| alarm->pending = 0; |
| |
| return 0; |
| } |
| |
| static int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info) |
| { |
| int ret; |
| unsigned int data; |
| |
| ret = regmap_read(info->regmap, info->regs->udr_update, &data); |
| if (ret < 0) { |
| dev_err(info->dev, "failed to read update reg(%d)\n", ret); |
| return ret; |
| } |
| |
| data |= info->regs->write_time_udr_mask; |
| |
| ret = regmap_write(info->regmap, info->regs->udr_update, data); |
| if (ret < 0) { |
| dev_err(info->dev, "failed to write update reg(%d)\n", ret); |
| return ret; |
| } |
| |
| ret = s5m8767_wait_for_udr_update(info); |
| |
| return ret; |
| } |
| |
| static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info) |
| { |
| int ret; |
| unsigned int data; |
| |
| ret = regmap_read(info->regmap, info->regs->udr_update, &data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read update reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| data |= info->regs->write_alarm_udr_mask; |
| switch (info->device_type) { |
| case S5M8763X: |
| case S5M8767X: |
| data &= ~S5M_RTC_TIME_EN_MASK; |
| break; |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| /* No exceptions needed */ |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_write(info->regmap, info->regs->udr_update, data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write update reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = s5m8767_wait_for_udr_update(info); |
| |
| /* On S2MPS13 the AUDR is not auto-cleared */ |
| if (info->device_type == S2MPS13X) |
| regmap_update_bits(info->regmap, info->regs->udr_update, |
| S2MPS13_RTC_AUDR_MASK, 0); |
| |
| return ret; |
| } |
| |
| static void s5m8763_data_to_tm(u8 *data, struct rtc_time *tm) |
| { |
| tm->tm_sec = bcd2bin(data[RTC_SEC]); |
| tm->tm_min = bcd2bin(data[RTC_MIN]); |
| |
| if (data[RTC_HOUR] & HOUR_12) { |
| tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x1f); |
| if (data[RTC_HOUR] & HOUR_PM) |
| tm->tm_hour += 12; |
| } else { |
| tm->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3f); |
| } |
| |
| tm->tm_wday = data[RTC_WEEKDAY] & 0x07; |
| tm->tm_mday = bcd2bin(data[RTC_DATE]); |
| tm->tm_mon = bcd2bin(data[RTC_MONTH]); |
| tm->tm_year = bcd2bin(data[RTC_YEAR1]) + bcd2bin(data[RTC_YEAR2]) * 100; |
| tm->tm_year -= 1900; |
| } |
| |
| static void s5m8763_tm_to_data(struct rtc_time *tm, u8 *data) |
| { |
| data[RTC_SEC] = bin2bcd(tm->tm_sec); |
| data[RTC_MIN] = bin2bcd(tm->tm_min); |
| data[RTC_HOUR] = bin2bcd(tm->tm_hour); |
| data[RTC_WEEKDAY] = tm->tm_wday; |
| data[RTC_DATE] = bin2bcd(tm->tm_mday); |
| data[RTC_MONTH] = bin2bcd(tm->tm_mon); |
| data[RTC_YEAR1] = bin2bcd(tm->tm_year % 100); |
| data[RTC_YEAR2] = bin2bcd((tm->tm_year + 1900) / 100); |
| } |
| |
| static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct s5m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[info->regs->regs_count]; |
| int ret; |
| |
| if (info->regs->read_time_udr_mask) { |
| ret = regmap_update_bits(info->regmap, |
| info->regs->udr_update, |
| info->regs->read_time_udr_mask, |
| info->regs->read_time_udr_mask); |
| if (ret) { |
| dev_err(dev, |
| "Failed to prepare registers for time reading: %d\n", |
| ret); |
| return ret; |
| } |
| } |
| ret = regmap_bulk_read(info->regmap, info->regs->time, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| |
| switch (info->device_type) { |
| case S5M8763X: |
| s5m8763_data_to_tm(data, tm); |
| break; |
| |
| case S5M8767X: |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday); |
| |
| return rtc_valid_tm(tm); |
| } |
| |
| static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct s5m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[info->regs->regs_count]; |
| int ret = 0; |
| |
| switch (info->device_type) { |
| case S5M8763X: |
| s5m8763_tm_to_data(tm, data); |
| break; |
| case S5M8767X: |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| ret = s5m8767_tm_to_data(tm, data); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + tm->tm_year, 1 + tm->tm_mon, tm->tm_mday, |
| tm->tm_hour, tm->tm_min, tm->tm_sec, tm->tm_wday); |
| |
| ret = regmap_raw_write(info->regmap, info->regs->time, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| |
| ret = s5m8767_rtc_set_time_reg(info); |
| |
| return ret; |
| } |
| |
| static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct s5m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[info->regs->regs_count]; |
| unsigned int val; |
| int ret, i; |
| |
| ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| |
| switch (info->device_type) { |
| case S5M8763X: |
| s5m8763_data_to_tm(data, &alrm->time); |
| ret = regmap_read(info->regmap, S5M_ALARM0_CONF, &val); |
| if (ret < 0) |
| return ret; |
| |
| alrm->enabled = !!val; |
| break; |
| |
| case S5M8767X: |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode); |
| alrm->enabled = 0; |
| for (i = 0; i < info->regs->regs_count; i++) { |
| if (data[i] & ALARM_ENABLE_MASK) { |
| alrm->enabled = 1; |
| break; |
| } |
| } |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon, |
| alrm->time.tm_mday, alrm->time.tm_hour, |
| alrm->time.tm_min, alrm->time.tm_sec, |
| alrm->time.tm_wday); |
| |
| ret = s5m_check_peding_alarm_interrupt(info, alrm); |
| |
| return 0; |
| } |
| |
| static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info) |
| { |
| u8 data[info->regs->regs_count]; |
| int ret, i; |
| struct rtc_time tm; |
| |
| ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| |
| s5m8767_data_to_tm(data, &tm, info->rtc_24hr_mode); |
| dev_dbg(info->dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday, |
| tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday); |
| |
| switch (info->device_type) { |
| case S5M8763X: |
| ret = regmap_write(info->regmap, S5M_ALARM0_CONF, 0); |
| break; |
| |
| case S5M8767X: |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| for (i = 0; i < info->regs->regs_count; i++) |
| data[i] &= ~ALARM_ENABLE_MASK; |
| |
| ret = regmap_raw_write(info->regmap, info->regs->alarm0, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| |
| ret = s5m8767_rtc_set_alarm_reg(info); |
| |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int s5m_rtc_start_alarm(struct s5m_rtc_info *info) |
| { |
| int ret; |
| u8 data[info->regs->regs_count]; |
| u8 alarm0_conf; |
| struct rtc_time tm; |
| |
| ret = regmap_bulk_read(info->regmap, info->regs->alarm0, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| |
| s5m8767_data_to_tm(data, &tm, info->rtc_24hr_mode); |
| dev_dbg(info->dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday, |
| tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday); |
| |
| switch (info->device_type) { |
| case S5M8763X: |
| alarm0_conf = 0x77; |
| ret = regmap_write(info->regmap, S5M_ALARM0_CONF, alarm0_conf); |
| break; |
| |
| case S5M8767X: |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| data[RTC_SEC] |= ALARM_ENABLE_MASK; |
| data[RTC_MIN] |= ALARM_ENABLE_MASK; |
| data[RTC_HOUR] |= ALARM_ENABLE_MASK; |
| data[RTC_WEEKDAY] &= ~ALARM_ENABLE_MASK; |
| if (data[RTC_DATE] & 0x1f) |
| data[RTC_DATE] |= ALARM_ENABLE_MASK; |
| if (data[RTC_MONTH] & 0xf) |
| data[RTC_MONTH] |= ALARM_ENABLE_MASK; |
| if (data[RTC_YEAR1] & 0x7f) |
| data[RTC_YEAR1] |= ALARM_ENABLE_MASK; |
| |
| ret = regmap_raw_write(info->regmap, info->regs->alarm0, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| ret = s5m8767_rtc_set_alarm_reg(info); |
| |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct s5m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[info->regs->regs_count]; |
| int ret; |
| |
| switch (info->device_type) { |
| case S5M8763X: |
| s5m8763_tm_to_data(&alrm->time, data); |
| break; |
| |
| case S5M8767X: |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| s5m8767_tm_to_data(&alrm->time, data); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + alrm->time.tm_year, 1 + alrm->time.tm_mon, |
| alrm->time.tm_mday, alrm->time.tm_hour, alrm->time.tm_min, |
| alrm->time.tm_sec, alrm->time.tm_wday); |
| |
| ret = s5m_rtc_stop_alarm(info); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_raw_write(info->regmap, info->regs->alarm0, data, |
| info->regs->regs_count); |
| if (ret < 0) |
| return ret; |
| |
| ret = s5m8767_rtc_set_alarm_reg(info); |
| if (ret < 0) |
| return ret; |
| |
| if (alrm->enabled) |
| ret = s5m_rtc_start_alarm(info); |
| |
| return ret; |
| } |
| |
| static int s5m_rtc_alarm_irq_enable(struct device *dev, |
| unsigned int enabled) |
| { |
| struct s5m_rtc_info *info = dev_get_drvdata(dev); |
| |
| if (enabled) |
| return s5m_rtc_start_alarm(info); |
| else |
| return s5m_rtc_stop_alarm(info); |
| } |
| |
| static irqreturn_t s5m_rtc_alarm_irq(int irq, void *data) |
| { |
| struct s5m_rtc_info *info = data; |
| |
| rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops s5m_rtc_ops = { |
| .read_time = s5m_rtc_read_time, |
| .set_time = s5m_rtc_set_time, |
| .read_alarm = s5m_rtc_read_alarm, |
| .set_alarm = s5m_rtc_set_alarm, |
| .alarm_irq_enable = s5m_rtc_alarm_irq_enable, |
| }; |
| |
| static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info) |
| { |
| u8 data[2]; |
| int ret; |
| |
| switch (info->device_type) { |
| case S5M8763X: |
| case S5M8767X: |
| /* UDR update time. Default of 7.32 ms is too long. */ |
| ret = regmap_update_bits(info->regmap, S5M_RTC_UDR_CON, |
| S5M_RTC_UDR_T_MASK, S5M_RTC_UDR_T_450_US); |
| if (ret < 0) |
| dev_err(info->dev, "%s: fail to change UDR time: %d\n", |
| __func__, ret); |
| |
| /* Set RTC control register : Binary mode, 24hour mode */ |
| data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); |
| data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); |
| |
| ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2); |
| break; |
| |
| case S2MPS15X: |
| case S2MPS14X: |
| case S2MPS13X: |
| data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); |
| ret = regmap_write(info->regmap, info->regs->ctrl, data[0]); |
| if (ret < 0) |
| break; |
| |
| /* |
| * Should set WUDR & (RUDR or AUDR) bits to high after writing |
| * RTC_CTRL register like writing Alarm registers. We can't find |
| * the description from datasheet but vendor code does that |
| * really. |
| */ |
| ret = s5m8767_rtc_set_alarm_reg(info); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| info->rtc_24hr_mode = 1; |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write controlm reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int s5m_rtc_probe(struct platform_device *pdev) |
| { |
| struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent); |
| struct sec_platform_data *pdata = s5m87xx->pdata; |
| struct s5m_rtc_info *info; |
| const struct regmap_config *regmap_cfg; |
| int ret, alarm_irq; |
| |
| if (!pdata) { |
| dev_err(pdev->dev.parent, "Platform data not supplied\n"); |
| return -ENODEV; |
| } |
| |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| switch (platform_get_device_id(pdev)->driver_data) { |
| case S2MPS15X: |
| regmap_cfg = &s2mps14_rtc_regmap_config; |
| info->regs = &s2mps15_rtc_regs; |
| alarm_irq = S2MPS14_IRQ_RTCA0; |
| break; |
| case S2MPS14X: |
| regmap_cfg = &s2mps14_rtc_regmap_config; |
| info->regs = &s2mps14_rtc_regs; |
| alarm_irq = S2MPS14_IRQ_RTCA0; |
| break; |
| case S2MPS13X: |
| regmap_cfg = &s2mps14_rtc_regmap_config; |
| info->regs = &s2mps13_rtc_regs; |
| alarm_irq = S2MPS14_IRQ_RTCA0; |
| break; |
| case S5M8763X: |
| regmap_cfg = &s5m_rtc_regmap_config; |
| info->regs = &s5m_rtc_regs; |
| alarm_irq = S5M8763_IRQ_ALARM0; |
| break; |
| case S5M8767X: |
| regmap_cfg = &s5m_rtc_regmap_config; |
| info->regs = &s5m_rtc_regs; |
| alarm_irq = S5M8767_IRQ_RTCA1; |
| break; |
| default: |
| dev_err(&pdev->dev, |
| "Device type %lu is not supported by RTC driver\n", |
| platform_get_device_id(pdev)->driver_data); |
| return -ENODEV; |
| } |
| |
| info->i2c = i2c_new_dummy(s5m87xx->i2c->adapter, RTC_I2C_ADDR); |
| if (!info->i2c) { |
| dev_err(&pdev->dev, "Failed to allocate I2C for RTC\n"); |
| return -ENODEV; |
| } |
| |
| info->regmap = devm_regmap_init_i2c(info->i2c, regmap_cfg); |
| if (IS_ERR(info->regmap)) { |
| ret = PTR_ERR(info->regmap); |
| dev_err(&pdev->dev, "Failed to allocate RTC register map: %d\n", |
| ret); |
| goto err; |
| } |
| |
| info->dev = &pdev->dev; |
| info->s5m87xx = s5m87xx; |
| info->device_type = platform_get_device_id(pdev)->driver_data; |
| |
| if (s5m87xx->irq_data) { |
| info->irq = regmap_irq_get_virq(s5m87xx->irq_data, alarm_irq); |
| if (info->irq <= 0) { |
| ret = -EINVAL; |
| dev_err(&pdev->dev, "Failed to get virtual IRQ %d\n", |
| alarm_irq); |
| goto err; |
| } |
| } |
| |
| platform_set_drvdata(pdev, info); |
| |
| ret = s5m8767_rtc_init_reg(info); |
| |
| device_init_wakeup(&pdev->dev, 1); |
| |
| info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc", |
| &s5m_rtc_ops, THIS_MODULE); |
| |
| if (IS_ERR(info->rtc_dev)) { |
| ret = PTR_ERR(info->rtc_dev); |
| goto err; |
| } |
| |
| if (!info->irq) { |
| dev_info(&pdev->dev, "Alarm IRQ not available\n"); |
| return 0; |
| } |
| |
| ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, |
| s5m_rtc_alarm_irq, 0, "rtc-alarm0", |
| info); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n", |
| info->irq, ret); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| i2c_unregister_device(info->i2c); |
| |
| return ret; |
| } |
| |
| static int s5m_rtc_remove(struct platform_device *pdev) |
| { |
| struct s5m_rtc_info *info = platform_get_drvdata(pdev); |
| |
| i2c_unregister_device(info->i2c); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int s5m_rtc_resume(struct device *dev) |
| { |
| struct s5m_rtc_info *info = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| if (info->irq && device_may_wakeup(dev)) |
| ret = disable_irq_wake(info->irq); |
| |
| return ret; |
| } |
| |
| static int s5m_rtc_suspend(struct device *dev) |
| { |
| struct s5m_rtc_info *info = dev_get_drvdata(dev); |
| int ret = 0; |
| |
| if (info->irq && device_may_wakeup(dev)) |
| ret = enable_irq_wake(info->irq); |
| |
| return ret; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(s5m_rtc_pm_ops, s5m_rtc_suspend, s5m_rtc_resume); |
| |
| static const struct platform_device_id s5m_rtc_id[] = { |
| { "s5m-rtc", S5M8767X }, |
| { "s2mps13-rtc", S2MPS13X }, |
| { "s2mps14-rtc", S2MPS14X }, |
| { "s2mps15-rtc", S2MPS15X }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, s5m_rtc_id); |
| |
| static struct platform_driver s5m_rtc_driver = { |
| .driver = { |
| .name = "s5m-rtc", |
| .pm = &s5m_rtc_pm_ops, |
| }, |
| .probe = s5m_rtc_probe, |
| .remove = s5m_rtc_remove, |
| .id_table = s5m_rtc_id, |
| }; |
| |
| module_platform_driver(s5m_rtc_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); |
| MODULE_DESCRIPTION("Samsung S5M/S2MPS14 RTC driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:s5m-rtc"); |