| /* |
| * rtc-s2mpu09.c |
| * |
| * Copyright (c) 2016 Samsung Electronics Co., Ltd |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * 2013-12-11 Performance improvements and code clean up by |
| * Minsung Kim <ms925.kim@samsung.com> |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/gpio.h> |
| #include <linux/rtc.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/samsung/rtc-s2mp.h> |
| #include <linux/mfd/samsung/s2mpu09.h> |
| #include <linux/mfd/samsung/s2mpu09-regulator.h> |
| |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| #include <linux/reboot.h> |
| #include <linux/wakelock.h> |
| #endif |
| |
| /*#define CONFIG_WEEKDAY_ALARM_ENABLE*/ |
| |
| struct s2m_rtc_info { |
| struct device *dev; |
| struct i2c_client *i2c; |
| struct i2c_client *pmic_i2c; |
| struct s2mpu09_dev *iodev; |
| struct rtc_device *rtc_dev; |
| struct mutex lock; |
| struct work_struct irq_work; |
| int irq; |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| int alarm_boot_irq; |
| bool lpm_mode; |
| bool alarm_irq_flag; |
| struct wake_lock alarm_wake_lock; |
| #endif |
| bool use_irq; |
| bool wtsr_en; |
| bool smpl_en; |
| bool alarm_enabled; |
| u8 update_reg; |
| bool use_alarm_workaround; |
| bool alarm_check; |
| u8 wudr_mask; |
| u8 audr_mask; |
| }; |
| |
| static struct wakeup_source *rtc_ws; |
| |
| #ifdef CONFIG_SEC_PM |
| static bool is_rtc_cleared; |
| #endif |
| |
| #if defined(CONFIG_BATTERY_SAMSUNG) |
| extern unsigned int lpcharge; |
| #endif |
| |
| enum S2M_RTC_OP { |
| S2M_RTC_READ, |
| S2M_RTC_WRITE_TIME, |
| S2M_RTC_WRITE_ALARM, |
| }; |
| |
| static void s2m_data_to_tm(u8 *data, struct rtc_time *tm) |
| { |
| // tm->tm_msec = (data[RTC_MSEC] & 0x0f) + (data[RTC_MSEC] & 0xf0) * 10; |
| tm->tm_sec = data[RTC_SEC] & 0x7f; |
| tm->tm_min = data[RTC_MIN] & 0x7f; |
| tm->tm_hour = data[RTC_HOUR] & 0x1f; |
| tm->tm_wday = __fls(data[RTC_WEEKDAY] & 0x7f); |
| tm->tm_mday = data[RTC_DATE] & 0x1f; |
| tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1; |
| tm->tm_year = (data[RTC_YEAR] & 0x7f) + 100; |
| tm->tm_yday = 0; |
| tm->tm_isdst = 0; |
| } |
| |
| #ifdef CONFIG_RTC_HIGH_RES |
| static void s2m_data_to_hrtm(u8 *data, struct rtc_hrtime *tm) |
| { |
| tm->tm_msec = (data[RTC_HR_MSEC] & 0x7f) * 10; |
| tm->tm_sec = data[RTC_HR_SEC] & 0x7f; |
| tm->tm_min = data[RTC_HR_MIN] & 0x7f; |
| tm->tm_hour = data[RTC_HR_HOUR] & 0x1f; |
| tm->tm_wday = __fls(data[RTC_HR_WEEKDAY] & 0x7f); |
| tm->tm_mday = data[RTC_HR_DATE] & 0x1f; |
| tm->tm_mon = (data[RTC_HR_MONTH] & 0x0f) - 1; |
| tm->tm_year = (data[RTC_HR_YEAR] & 0x7f) + 100; |
| tm->tm_yday = 0; |
| tm->tm_isdst = 0; |
| } |
| #endif /* CONFIG_RTC_HIGH_RES */ |
| |
| static int s2m_tm_to_data(struct rtc_time *tm, u8 *data) |
| { |
| // data[RTC_MSEC] = ((tm->tm_msec / 10) << 4) | (tm->tm_msec % 10); |
| data[RTC_SEC] = tm->tm_sec; |
| data[RTC_MIN] = tm->tm_min; |
| |
| if (tm->tm_hour >= 12) |
| data[RTC_HOUR] = tm->tm_hour | HOUR_PM_MASK; |
| else |
| data[RTC_HOUR] = tm->tm_hour; |
| |
| data[RTC_WEEKDAY] = BIT(tm->tm_wday); |
| data[RTC_DATE] = tm->tm_mday; |
| data[RTC_MONTH] = tm->tm_mon + 1; |
| data[RTC_YEAR] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0 ; |
| |
| if (tm->tm_year < 100) { |
| pr_warn("%s: SEC RTC cannot handle the year %d\n", __func__, |
| 1900 + tm->tm_year); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int s2m_rtc_update(struct s2m_rtc_info *info, |
| enum S2M_RTC_OP op) |
| { |
| u8 data; |
| int ret; |
| |
| if (!info || !info->iodev) { |
| pr_err("%s: Invalid argument\n", __func__); |
| return -EINVAL; |
| } |
| |
| switch (op) { |
| case S2M_RTC_READ: |
| data = RTC_RUDR_MASK; |
| break; |
| case S2M_RTC_WRITE_TIME: |
| data = RTC_WUDR_MASK_REV; |
| break; |
| case S2M_RTC_WRITE_ALARM: |
| data = RTC_AUDR_MASK_REV; |
| break; |
| default: |
| dev_err(info->dev, "%s: invalid op(%d)\n", __func__, op); |
| return -EINVAL; |
| } |
| |
| data |= info->update_reg; |
| |
| ret = s2mpu09_write_reg(info->i2c, S2MP_RTC_REG_UPDATE, data); |
| if (ret < 0) |
| dev_err(info->dev, "%s: fail to write update reg(%d,%u)\n", |
| __func__, ret, data); |
| else |
| usleep_range(1000, 1000); |
| |
| return ret; |
| } |
| |
| static int s2m_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[NR_RTC_CNT_REGS]; |
| int ret; |
| |
| mutex_lock(&info->lock); |
| ret = s2m_rtc_update(info, S2M_RTC_READ); |
| if (ret < 0) |
| goto out; |
| |
| ret = s2mpu09_bulk_read(info->i2c, S2MP_RTC_REG_SEC, NR_RTC_CNT_REGS, |
| data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read time reg(%d)\n", __func__, |
| ret); |
| goto out; |
| } |
| |
| dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d(0x%02x)%s\n", |
| __func__, data[RTC_YEAR] + 2000, data[RTC_MONTH], |
| data[RTC_DATE], data[RTC_HOUR] & 0x1f, data[RTC_MIN], |
| data[RTC_SEC], data[RTC_WEEKDAY], |
| data[RTC_HOUR] & HOUR_PM_MASK ? "PM" : "AM"); |
| |
| s2m_data_to_tm(data, tm); |
| ret = rtc_valid_tm(tm); |
| out: |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| #ifdef CONFIG_RTC_HIGH_RES |
| static int s2m_rtc_read_hrtime(struct device *dev, struct rtc_hrtime *tm) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[NR_RTC_HR_CNT_REGS]; |
| int ret; |
| |
| mutex_lock(&info->lock); |
| ret = s2m_rtc_update(info, S2M_RTC_READ); |
| if (ret < 0) |
| goto out; |
| |
| ret = s2mpu09_bulk_read(info->i2c, S2MP_RTC_REG_MSEC, |
| NR_RTC_HR_CNT_REGS, data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read hrtime reg(%d)\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| pr_info("%s: RTC_MSEC: 0x%02X\n", __func__, data[RTC_HR_MSEC]); |
| |
| dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d.%03d(0x%02x)%s\n", |
| __func__, data[RTC_HR_YEAR] + 2000, data[RTC_HR_MONTH], |
| data[RTC_HR_DATE], data[RTC_HR_HOUR] & 0x1f, |
| data[RTC_HR_MIN], data[RTC_HR_SEC], |
| (data[RTC_HR_MSEC] & 0x7f) * 10, data[RTC_HR_WEEKDAY], |
| data[RTC_HR_HOUR] & HOUR_PM_MASK ? "PM" : "AM"); |
| |
| s2m_data_to_hrtm(data, tm); |
| ret = rtc_valid_hrtm(tm); |
| out: |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| #endif /* CONFIG_RTC_HIGH_RES */ |
| |
| static int s2m_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[NR_RTC_CNT_REGS]; |
| int ret; |
| |
| ret = s2m_tm_to_data(tm, data); |
| if (ret < 0) |
| return ret; |
| |
| dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d(0x%02x)%s\n", |
| __func__, data[RTC_YEAR] + 2000, data[RTC_MONTH], |
| data[RTC_DATE], data[RTC_HOUR] & 0x1f, data[RTC_MIN], |
| data[RTC_SEC], data[RTC_WEEKDAY], |
| data[RTC_HOUR] & HOUR_PM_MASK ? "PM" : "AM"); |
| |
| mutex_lock(&info->lock); |
| ret = s2mpu09_bulk_write(info->i2c, S2MP_RTC_REG_SEC, NR_RTC_CNT_REGS, |
| data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write time reg(%d)\n", __func__, |
| ret); |
| goto out; |
| } |
| |
| ret = s2m_rtc_update(info, S2M_RTC_WRITE_TIME); |
| out: |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| /* This is a workaround for the problem that RTC TIME is overwirted by write |
| * buffer when setting RTC ALARM. It is quite rare but it does happen. The root |
| * cuase is that clear signal of RUDR & WUDR is 1 clock delay while it should be |
| * 2 clock delay. |
| */ |
| static int s2m_rtc_check_rtc_time(struct s2m_rtc_info *info) |
| { |
| u8 data[NR_RTC_CNT_REGS]; |
| struct rtc_time tm; |
| struct timeval sys_time; |
| unsigned long rtc_time; |
| int ret; |
| |
| /* Read RTC TIME */ |
| ret = s2m_rtc_update(info, S2M_RTC_READ); |
| if (ret < 0) |
| goto out; |
| |
| ret = s2mpu09_bulk_read(info->i2c, S2MP_RTC_REG_SEC, NR_RTC_CNT_REGS, |
| data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read time reg(%d)\n", __func__, |
| ret); |
| goto out; |
| } |
| |
| /* Get system time */ |
| do_gettimeofday(&sys_time); |
| |
| /* Convert RTC TIME to seconds since 01-01-1970 00:00:00. */ |
| s2m_data_to_tm(data, &tm); |
| rtc_tm_to_time(&tm, &rtc_time); |
| |
| if (abs(rtc_time - sys_time.tv_sec) > 2) { |
| /* Set RTC TIME */ |
| rtc_time_to_tm(sys_time.tv_sec, &tm); |
| ret = s2m_tm_to_data(&tm, data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to tm_to_data(%d)\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| ret = s2mpu09_bulk_write(info->i2c, S2MP_RTC_REG_SEC, |
| NR_RTC_CNT_REGS, data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write time reg(%d)\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| ret = s2m_rtc_update(info, S2M_RTC_WRITE_TIME); |
| |
| dev_warn(info->dev, "%s: adjust RTC TIME: sys_time: %lu, " |
| "rtc_time: %lu\n", __func__, sys_time.tv_sec, |
| rtc_time); |
| |
| dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d(0x%02x)%s\n", |
| __func__, data[RTC_YEAR] + 2000, data[RTC_MONTH], |
| data[RTC_DATE], data[RTC_HOUR] & 0x1f, data[RTC_MIN], |
| data[RTC_SEC], data[RTC_WEEKDAY], |
| data[RTC_HOUR] & HOUR_PM_MASK ? "PM" : "AM"); |
| } |
| out: |
| return ret; |
| } |
| |
| static int s2m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[NR_RTC_CNT_REGS]; |
| u8 reg, val; |
| int ret; |
| |
| mutex_lock(&info->lock); |
| ret = s2m_rtc_update(info, S2M_RTC_READ); |
| if (ret < 0) |
| goto out; |
| |
| ret = s2mpu09_bulk_read(info->i2c, S2MP_RTC_REG_A0SEC, NR_RTC_CNT_REGS, |
| data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s:%d fail to read alarm reg(%d)\n", |
| __func__, __LINE__, ret); |
| goto out; |
| } |
| |
| s2m_data_to_tm(data, &alrm->time); |
| |
| dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d(%d)\n", __func__, |
| alrm->time.tm_year + 1900, alrm->time.tm_mon + 1, |
| alrm->time.tm_mday, alrm->time.tm_hour, |
| alrm->time.tm_min, alrm->time.tm_sec, |
| alrm->time.tm_wday); |
| |
| alrm->enabled = info->alarm_enabled; |
| alrm->pending = 0; |
| |
| switch (info->iodev->device_type) { |
| case S2MPU09X: |
| reg = S2MPU09_PMIC_REG_STATUS2; |
| break; |
| default: |
| /* If this happens the core funtion has a problem */ |
| BUG(); |
| } |
| |
| ret = s2mpu09_read_reg(info->pmic_i2c, reg, &val); /* i2c for PM */ |
| if (ret < 0) { |
| dev_err(info->dev, "%s:%d fail to read STATUS2 reg(%d)\n", |
| __func__, __LINE__, ret); |
| goto out; |
| } |
| |
| if (val & RTCA0E) |
| alrm->pending = 1; |
| out: |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| static int s2m_rtc_set_alarm_enable(struct s2m_rtc_info *info, bool enabled) |
| { |
| if (!info->use_irq) |
| return -EPERM; |
| |
| if (enabled && !info->alarm_enabled) { |
| info->alarm_enabled = true; |
| enable_irq(info->irq); |
| } else if (!enabled && info->alarm_enabled) { |
| info->alarm_enabled = false; |
| disable_irq(info->irq); |
| } |
| return 0; |
| } |
| |
| static int s2m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[NR_RTC_CNT_REGS]; |
| int ret, i; |
| |
| mutex_lock(&info->lock); |
| ret = s2m_tm_to_data(&alrm->time, data); |
| if (ret < 0) |
| goto out; |
| |
| dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d(0x%02x)%s\n", |
| __func__, data[RTC_YEAR] + 2000, data[RTC_MONTH], |
| data[RTC_DATE], data[RTC_HOUR] & 0x1f, data[RTC_MIN], |
| data[RTC_SEC], data[RTC_WEEKDAY], |
| data[RTC_HOUR] & HOUR_PM_MASK ? "PM" : "AM"); |
| |
| if (info->alarm_check) { |
| for (i = 0; i < NR_RTC_CNT_REGS; i++) |
| data[i] &= ~ALARM_ENABLE_MASK; |
| |
| ret = s2mpu09_bulk_write(info->i2c, S2MP_RTC_REG_A0SEC, NR_RTC_CNT_REGS, |
| data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to disable alarm reg(%d)\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| ret = s2m_rtc_update(info, S2M_RTC_WRITE_ALARM); |
| if (ret < 0) |
| goto out; |
| } |
| |
| for (i = 0; i < NR_RTC_CNT_REGS; i++) |
| data[i] |= ALARM_ENABLE_MASK; |
| |
| ret = s2mpu09_bulk_write(info->i2c, S2MP_RTC_REG_A0SEC, NR_RTC_CNT_REGS, |
| data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write alarm reg(%d)\n", |
| __func__, ret); |
| goto out; |
| } |
| |
| ret = s2m_rtc_update(info, S2M_RTC_WRITE_ALARM); |
| if (ret < 0) |
| goto out; |
| |
| if (info->use_alarm_workaround) { |
| ret = s2m_rtc_check_rtc_time(info); |
| if (ret < 0) |
| goto out; |
| } |
| |
| ret = s2m_rtc_set_alarm_enable(info, alrm->enabled); |
| out: |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| static inline int s2m_rtc_set_update_reg(struct s2m_rtc_info *info,enum S2M_RTC_OP op) |
| { |
| int ret; |
| u8 data; |
| |
| ret = s2mpu09_read_reg(info->i2c, S2MP_RTC_REG_UPDATE, &data); |
| if (ret < 0) |
| return ret; |
| |
| switch (op) { |
| case S2M_RTC_READ: |
| data |= RTC_RUDR_MASK; |
| break; |
| case S2M_RTC_WRITE_TIME: |
| data |= info->wudr_mask; |
| break; |
| case S2M_RTC_WRITE_ALARM: |
| data |= info->audr_mask; |
| break; |
| default: |
| dev_err(info->dev, "%s: invalid op(%d)\n", __func__, op); |
| return -EINVAL; |
| } |
| |
| ret = s2mpu09_write_reg(info->i2c, S2MP_RTC_REG_UPDATE,data); |
| |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write update reg(%d)\n", |
| __func__, ret); |
| } else { |
| usleep_range(1000, 1000); |
| } |
| |
| return ret; |
| } |
| |
| static int s2m_rtc_stop_alarm_boot(struct s2m_rtc_info *info) |
| { |
| u8 data[7]; |
| int ret, i; |
| struct rtc_time tm; |
| |
| ret = s2mpu09_bulk_read(info->i2c, S2MP_RTC_REG_A1SEC, 7, data); |
| if (ret < 0) |
| return ret; |
| |
| s2m_data_to_tm(data, &tm); |
| |
| printk(KERN_INFO "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday, |
| tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday); |
| |
| for (i = 0; i < 7; i++) |
| data[i] &= ~ALARM_ENABLE_MASK; |
| |
| ret = s2mpu09_bulk_write(info->i2c, S2MP_RTC_REG_A1SEC, 7, data); |
| if (ret < 0) |
| return ret; |
| |
| ret = s2m_rtc_set_update_reg(info, S2M_RTC_WRITE_ALARM); |
| |
| return ret; |
| } |
| |
| static int s2m_rtc_start_alarm_boot(struct s2m_rtc_info *info) |
| { |
| int ret; |
| u8 data[7]; |
| struct rtc_time tm; |
| |
| ret = s2mpu09_bulk_read(info->i2c, S2MP_RTC_REG_A1SEC, 7, data); |
| if (ret < 0) |
| return ret; |
| |
| s2m_data_to_tm(data, &tm); |
| |
| printk(KERN_INFO "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + tm.tm_year, 1 + tm.tm_mon, tm.tm_mday, |
| tm.tm_hour, tm.tm_min, tm.tm_sec, tm.tm_wday); |
| |
| data[RTC_SEC] |= ALARM_ENABLE_MASK; |
| data[RTC_MIN] |= ALARM_ENABLE_MASK; |
| data[RTC_HOUR] |= ALARM_ENABLE_MASK; |
| data[RTC_WEEKDAY] &= 0x00; |
| if (data[RTC_DATE] & 0x1f) |
| data[RTC_DATE] |= ALARM_ENABLE_MASK; |
| if (data[RTC_MONTH] & 0xf) |
| data[RTC_MONTH] |= ALARM_ENABLE_MASK; |
| if (data[RTC_YEAR] & 0x7f) |
| data[RTC_YEAR] |= ALARM_ENABLE_MASK; |
| |
| ret = s2mpu09_bulk_write(info->i2c, S2MP_RTC_REG_A1SEC, 7, data); |
| if (ret < 0) |
| return ret; |
| |
| ret = s2m_rtc_set_update_reg(info, S2M_RTC_WRITE_ALARM); |
| |
| return ret; |
| } |
| |
| static int s2m_rtc_set_alarm_boot(struct device *dev, |
| struct rtc_wkalrm *alrm) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| u8 data[7]; |
| int ret; |
| |
| mutex_lock(&info->lock); |
| |
| s2m_tm_to_data(&alrm->time, data); |
| |
| dev_info(info->dev, "%s: %d-%02d-%02d %02d:%02d:%02d(0x%02x)%s\n", |
| __func__, data[RTC_YEAR] + 2000, data[RTC_MONTH], |
| data[RTC_DATE], data[RTC_HOUR] & 0x1f, data[RTC_MIN], |
| data[RTC_SEC], data[RTC_WEEKDAY], |
| data[RTC_HOUR] & HOUR_PM_MASK ? "PM" : "AM"); |
| |
| ret = s2m_rtc_stop_alarm_boot(info); |
| if (ret < 0) |
| return ret; |
| |
| ret = s2mpu09_read_reg(info->i2c, S2MP_RTC_REG_UPDATE, &info->update_reg); |
| if (ret < 0) |
| { |
| printk(KERN_INFO "%s: read fail \n", __func__); |
| return ret; |
| } |
| |
| if (alrm->enabled) |
| info->update_reg |= RTC_WAKE_MASK; |
| else |
| info->update_reg &= ~RTC_WAKE_MASK; |
| |
| ret = s2mpu09_write_reg(info->i2c, S2MP_RTC_REG_UPDATE, info->update_reg); |
| |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write update reg(%d)\n", |
| __func__, ret); |
| } else { |
| usleep_range(1000, 1000); |
| } |
| |
| ret = s2mpu09_bulk_write(info->i2c, S2MP_RTC_REG_A1SEC, 7, data); |
| if (ret < 0) |
| return ret; |
| |
| ret = s2m_rtc_set_update_reg(info, S2M_RTC_WRITE_ALARM); |
| |
| if (ret < 0) |
| return ret; |
| |
| if (alrm->enabled) |
| ret = s2m_rtc_start_alarm_boot(info); |
| |
| mutex_unlock(&info->lock); |
| |
| return ret; |
| } |
| |
| static int s2m_rtc_get_alarm_boot(struct device *dev, |
| struct rtc_wkalrm *alrm) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| |
| if( info->alarm_irq_flag) |
| alrm->enabled = 0x1; |
| else |
| alrm->enabled = 0x0; |
| printk("s2m_rtc_get_alarm_boot : %d, %d\n", |
| info->lpm_mode, alrm->enabled); |
| return info->lpm_mode; |
| } |
| #endif |
| |
| static int s2m_rtc_alarm_irq_enable(struct device *dev, |
| unsigned int enabled) |
| { |
| struct s2m_rtc_info *info = dev_get_drvdata(dev); |
| int ret; |
| |
| mutex_lock(&info->lock); |
| ret = s2m_rtc_set_alarm_enable(info, enabled); |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| static irqreturn_t s2m_rtc_alarm1_irq(int irq, void *data) |
| { |
| struct s2m_rtc_info *info = data; |
| |
| dev_info(info->dev, "%s:irq(%d), lpm_mode:(%d)\n", |
| __func__, irq, info->lpm_mode); |
| |
| if (info->lpm_mode) { |
| wake_lock(&info->alarm_wake_lock); |
| info->alarm_irq_flag = true; |
| } |
| |
| rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF); |
| |
| return IRQ_HANDLED; |
| } |
| #endif |
| |
| static irqreturn_t s2m_rtc_alarm_irq(int irq, void *data) |
| { |
| struct s2m_rtc_info *info = data; |
| |
| if (!info->rtc_dev) |
| return IRQ_HANDLED; |
| |
| dev_info(info->dev, "%s:irq(%d)\n", __func__, irq); |
| |
| rtc_update_irq(info->rtc_dev, 1, RTC_IRQF | RTC_AF); |
| __pm_wakeup_event(rtc_ws, 500); |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops s2m_rtc_ops = { |
| .read_time = s2m_rtc_read_time, |
| .read_hrtime = s2m_rtc_read_hrtime, |
| .set_time = s2m_rtc_set_time, |
| .read_alarm = s2m_rtc_read_alarm, |
| .set_alarm = s2m_rtc_set_alarm, |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| .set_alarm_boot = s2m_rtc_set_alarm_boot, |
| .get_alarm_boot = s2m_rtc_get_alarm_boot, |
| #endif |
| .alarm_irq_enable = s2m_rtc_alarm_irq_enable, |
| }; |
| |
| static void s2m_rtc_optimize_osc(struct s2m_rtc_info *info, |
| struct s2mpu09_platform_data *pdata) |
| { |
| int ret = 0; |
| |
| /* edit option for OSC_BIAS_UP */ |
| if (pdata->osc_bias_up >= 0) { |
| ret = s2mpu09_update_reg(info->i2c, S2MP_RTC_REG_CAPSEL, |
| pdata->osc_bias_up << OSC_BIAS_UP_SHIFT, |
| OSC_BIAS_UP_MASK); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write OSC_BIAS_UP(%d)\n", |
| __func__, pdata->osc_bias_up); |
| return; |
| } |
| } |
| |
| /* edit option for CAP_SEL */ |
| if (pdata->cap_sel >= 0) { |
| s2mpu09_update_reg(info->i2c, S2MP_RTC_REG_CAPSEL, |
| pdata->cap_sel << CAP_SEL_SHIFT, CAP_SEL_MASK); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write CAP_SEL(%d)\n", |
| __func__, pdata->cap_sel); |
| return; |
| } |
| } |
| |
| /* edit option for OSC_CTRL */ |
| if (pdata->osc_xin >= 0) { |
| s2mpu09_update_reg(info->i2c, S2MP_RTC_REG_OSCCTRL, |
| pdata->osc_xin << OSC_XIN_SHIFT, OSC_XIN_MASK); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write OSC_CTRL(%d)\n", |
| __func__, pdata->osc_xin); |
| return; |
| } |
| } |
| if (pdata->osc_xout >= 0) { |
| s2mpu09_update_reg(info->i2c, S2MP_RTC_REG_OSCCTRL, |
| pdata->osc_xout << OSC_XOUT_SHIFT, OSC_XOUT_MASK); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write OSC_CTRL(%d)\n", |
| __func__, pdata->osc_xout); |
| return; |
| } |
| } |
| } |
| |
| static bool s2m_is_jigonb_low(struct s2m_rtc_info *info) |
| { |
| int ret, reg; |
| u8 val, mask; |
| |
| switch (info->iodev->device_type) { |
| case S2MPU09X: |
| reg = S2MPU09_PMIC_REG_STATUS1; |
| mask = BIT(1); |
| break; |
| default: |
| BUG(); |
| } |
| |
| ret = s2mpu09_read_reg(info->i2c, reg, &val); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read status1 reg(%d)\n", |
| __func__, ret); |
| return false; |
| } |
| |
| return !(val & mask); |
| } |
| |
| static void s2m_rtc_enable_wtsr_smpl(struct s2m_rtc_info *info, |
| struct s2mpu09_platform_data *pdata) |
| { |
| u8 val; |
| int ret; |
| |
| if (pdata->wtsr_smpl->check_jigon && s2m_is_jigonb_low(info)) |
| pdata->wtsr_smpl->smpl_en = false; |
| |
| val = (pdata->wtsr_smpl->wtsr_en << WTSR_EN_SHIFT) |
| | (pdata->wtsr_smpl->smpl_en << SMPL_EN_SHIFT) |
| | WTSR_TIMER_BITS(pdata->wtsr_smpl->wtsr_timer_val) |
| | SMPL_TIMER_BITS(pdata->wtsr_smpl->smpl_timer_val); |
| |
| dev_info(info->dev, "%s: WTSR: %s, SMPL: %s\n", __func__, |
| pdata->wtsr_smpl->wtsr_en ? "enable" : "disable", |
| pdata->wtsr_smpl->smpl_en ? "enable" : "disable"); |
| |
| ret = s2mpu09_write_reg(info->i2c, S2MP_RTC_REG_WTSR_SMPL, val); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write WTSR/SMPL reg(%d)\n", |
| __func__, ret); |
| return; |
| } |
| info->wtsr_en = pdata->wtsr_smpl->wtsr_en; |
| info->smpl_en = pdata->wtsr_smpl->smpl_en; |
| } |
| |
| static void s2m_rtc_disable_wtsr_smpl(struct s2m_rtc_info *info, |
| struct s2mpu09_platform_data *pdata) |
| { |
| int ret; |
| |
| dev_info(info->dev, "%s: disable WTSR\n", __func__); |
| ret = s2mpu09_update_reg(info->i2c, S2MP_RTC_REG_WTSR_SMPL, 0, |
| WTSR_EN_MASK | SMPL_EN_MASK); |
| if (ret < 0) |
| dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n", |
| __func__, ret); |
| } |
| |
| static int s2m_rtc_init_reg(struct s2m_rtc_info *info, |
| struct s2mpu09_platform_data *pdata) |
| { |
| u8 data, update_val, ctrl_val, capsel_val; |
| int ret; |
| |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| u8 data_alm1[7]; |
| struct rtc_time alrm; |
| |
| ret = s2mpu09_bulk_read(info->i2c, S2MP_RTC_REG_A1SEC, 7, data_alm1); |
| if (ret < 0) |
| return ret; |
| |
| s2m_data_to_tm(data_alm1, &alrm); |
| |
| printk(KERN_INFO "%s: %d/%d/%d %d:%d:%d(%d)\n", __func__, |
| 1900 + alrm.tm_year, 1 + alrm.tm_mon, |
| alrm.tm_mday, alrm.tm_hour, |
| alrm.tm_min, alrm.tm_sec, |
| alrm.tm_wday); |
| #endif |
| |
| ret = s2mpu09_read_reg(info->i2c, S2MP_RTC_REG_UPDATE, &update_val); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read update reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| info->update_reg = |
| update_val & ~(RTC_WUDR_MASK_REV | RTC_FREEZE_MASK | RTC_RUDR_MASK | RTC_AUDR_MASK_REV); |
| |
| ret = s2mpu09_write_reg(info->i2c, S2MP_RTC_REG_UPDATE, info->update_reg); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write update reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| s2m_rtc_update(info, S2M_RTC_READ); |
| |
| ret = s2mpu09_read_reg(info->i2c, S2MP_RTC_REG_CTRL, &ctrl_val); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read control reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = s2mpu09_read_reg(info->i2c, S2MP_RTC_REG_CAPSEL, &capsel_val); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to read cap_sel reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| /* If the value of RTC_CTRL register is 0, RTC registers were reset */ |
| if ((ctrl_val & MODEL24_MASK) && ((capsel_val & 0xf0) == 0xf0)) |
| return 0; |
| |
| #ifdef CONFIG_SEC_PM |
| is_rtc_cleared = true; |
| #endif |
| |
| /* Set RTC control register : Binary mode, 24hour mode */ |
| data = MODEL24_MASK; |
| ret = s2mpu09_write_reg(info->i2c, S2MP_RTC_REG_CTRL, data); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write CTRL reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = s2m_rtc_update(info, S2M_RTC_WRITE_ALARM); |
| if (ret < 0) |
| return ret; |
| |
| capsel_val |= 0xf0; |
| ret = s2mpu09_write_reg(info->i2c, S2MP_RTC_REG_CAPSEL, capsel_val); |
| if (ret < 0) { |
| dev_err(info->dev, "%s: fail to write CAP_SEL reg(%d)\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| if (pdata->init_time) { |
| dev_info(info->dev, "%s: initialize RTC time\n", __func__); |
| ret = s2m_rtc_set_time(info->dev, pdata->init_time); |
| } |
| else { |
| dev_info(info->dev, "%s: RTC initialize is not operated: " |
| "This causes a weekday problem\n", __func__); |
| } |
| return ret; |
| } |
| |
| #ifdef CONFIG_SEC_PM |
| static ssize_t show_rtc_status(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%u\n", is_rtc_cleared); |
| } |
| |
| static DEVICE_ATTR(rtc_status, 0440, show_rtc_status, NULL); |
| #endif |
| |
| static int s2m_rtc_probe(struct platform_device *pdev) |
| { |
| struct s2mpu09_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| struct s2mpu09_platform_data *pdata = dev_get_platdata(iodev->dev); |
| struct s2m_rtc_info *info; |
| int irq_base; |
| int ret = 0; |
| |
| info = devm_kzalloc(&pdev->dev, sizeof(struct s2m_rtc_info), |
| GFP_KERNEL); |
| |
| if (!info) |
| return -ENOMEM; |
| |
| irq_base = pdata->irq_base; |
| if (!irq_base) { |
| dev_err(&pdev->dev, "Failed to get irq base %d\n", irq_base); |
| return -ENODEV; |
| } |
| |
| mutex_init(&info->lock); |
| info->dev = &pdev->dev; |
| info->iodev = iodev; |
| info->i2c = iodev->rtc; |
| info->pmic_i2c = iodev->pmic; |
| info->alarm_check = true; |
| info->use_alarm_workaround = false; |
| |
| info->wudr_mask = RTC_WUDR_MASK_REV; |
| info->audr_mask = RTC_AUDR_MASK_REV; |
| |
| switch (info->iodev->device_type) { |
| case S2MPU09X: |
| info->irq = irq_base + S2MPU09_PMIC_IRQ_RTCA0_INT2; |
| |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| info->alarm_boot_irq = irq_base + S2MPU09_PMIC_IRQ_RTCA1_INT2; |
| #endif |
| break; |
| default: |
| /* If this happens the core funtion has a problem */ |
| BUG(); |
| } |
| |
| platform_set_drvdata(pdev, info); |
| |
| ret = s2m_rtc_init_reg(info, pdata); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to initialize RTC reg:%d\n", ret); |
| goto err_rtc_init_reg; |
| } |
| |
| /* enable wtsrm smpl */ |
| if (pdata->wtsr_smpl) |
| s2m_rtc_enable_wtsr_smpl(info, pdata); |
| |
| s2m_rtc_optimize_osc(info, pdata); |
| |
| device_init_wakeup(&pdev->dev, true); |
| rtc_ws = wakeup_source_register(&pdev->dev, "rtc-s2mp"); |
| |
| ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL, |
| s2m_rtc_alarm_irq, 0, "rtc-alarm0", info); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n", |
| info->irq, ret); |
| goto err_rtc_irq; |
| } |
| disable_irq(info->irq); |
| disable_irq(info->irq); |
| info->use_irq = true; |
| |
| info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s2mp-rtc", |
| &s2m_rtc_ops, THIS_MODULE); |
| |
| if (IS_ERR(info->rtc_dev)) { |
| ret = PTR_ERR(info->rtc_dev); |
| dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret); |
| goto err_rtc_dev_register; |
| } |
| enable_irq(info->irq); |
| |
| #ifdef CONFIG_SEC_PM |
| ret = sysfs_create_file(power_kobj, &dev_attr_rtc_status.attr); |
| if (ret) |
| dev_err(&pdev->dev, "%s: failed to create rtc_status(%d)\n", |
| __func__, ret); |
| #endif |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| ret = devm_request_threaded_irq(&pdev->dev, info->alarm_boot_irq, NULL, |
| s2m_rtc_alarm1_irq, 0, "rtc-alarm1", info); |
| |
| if (ret < 0) |
| dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n", |
| info->alarm_boot_irq, ret); |
| |
| info->lpm_mode = lpcharge; |
| |
| if(info->lpm_mode) |
| wake_lock_init(&info->alarm_wake_lock, WAKE_LOCK_SUSPEND, |
| "alarm_wake_lock"); |
| #endif |
| |
| return 0; |
| |
| err_rtc_dev_register: |
| devm_free_irq(&pdev->dev, info->irq, info); |
| enable_irq(info->irq); |
| enable_irq(info->irq); |
| err_rtc_irq: |
| wakeup_source_unregister(rtc_ws); |
| err_rtc_init_reg: |
| platform_set_drvdata(pdev, NULL); |
| mutex_destroy(&info->lock); |
| |
| return ret; |
| } |
| |
| static int s2m_rtc_remove(struct platform_device *pdev) |
| { |
| struct s2m_rtc_info *info = platform_get_drvdata(pdev); |
| |
| if (!info->alarm_enabled) |
| enable_irq(info->irq); |
| |
| #if defined(CONFIG_RTC_ALARM_BOOT) |
| free_irq(info->alarm_boot_irq, info); |
| #endif |
| wakeup_source_unregister(rtc_ws); |
| |
| return 0; |
| } |
| |
| static void s2m_rtc_shutdown(struct platform_device *pdev) |
| { |
| /*disable wtsr, smpl */ |
| struct s2m_rtc_info *info = platform_get_drvdata(pdev); |
| struct s2mpu09_platform_data *pdata = |
| dev_get_platdata(info->iodev->dev); |
| |
| if (info->wtsr_en || info->smpl_en) |
| s2m_rtc_disable_wtsr_smpl(info, pdata); |
| } |
| |
| static const struct platform_device_id s2m_rtc_id[] = { |
| { "s2mpu09-rtc", 0 }, |
| }; |
| |
| static struct platform_driver s2m_rtc_driver = { |
| .driver = { |
| .name = "s2mpu09-rtc", |
| .owner = THIS_MODULE, |
| }, |
| .probe = s2m_rtc_probe, |
| .remove = s2m_rtc_remove, |
| .shutdown = s2m_rtc_shutdown, |
| .id_table = s2m_rtc_id, |
| }; |
| |
| module_platform_driver(s2m_rtc_driver); |
| |
| /* Module information */ |
| MODULE_DESCRIPTION("Samsung RTC driver"); |
| MODULE_AUTHOR("Samsung Electronics"); |
| MODULE_LICENSE("GPL"); |